Background: Malignant pleural effusion (MPE), a common complication of advanced cancers, is associated with poor prognosis and reduced quality of life. Although host–tumor interactions are known to drive MPE development, the associated immune dynamics during disease progression remain unclear. Using a Lewis lung carcinoma-induced MPE model in C57BL/6JNidfc mice, we systematically evaluated general parameters and immune cell changes at two-day intervals throughout disease progression. Results: The day of Lewis lung carcinoma cell injection into the pleural space was designated as day 0. By day 10 post-injection (p.i.), MPE-bearing mice exhibited ~ 10% body weight loss, marking the experimental endpoint. Pleural tumor mass and pleural effusion volume were minimal up to day 4 p.i. but increased sharply from day 6 onward.CD45⁺ immune cell counts rose over time, and days 6, 8, and 10 p.i. marked key stages of MPE progression. On day 6, B cells, T cells, and natural killer cells, but not macrophages and neutrophils, increased significantly compared to earlier timepoints. By day 8, all immune cell subsets except T cells exceeded day 6 levels, and at day 10, natural killer cell numbers declined while others continued to increase. Besides, the numbers of CD8⁺ T cells, Th1 cells, regulatory T cells, and M2 macrophages progressively increased from day 6 to 10. Based on these data, days 6 and 10 were defined as early and advanced MPE stages, respectively, with distinct immune phenotypes. In advanced MPE, CD8⁺ T cells displayed reduced IFN-γ, TNF-α, Granzyme B, Perforin, FasL, and Ki-67, but upregulated PD-1 and CTLA-4 relative to early stage. Similarly, Th1 cells showed decreased IFN-γ, TNF-α, and IL-2 production along with reduced Ki-67 expression. Advanced-stage M2 macrophages exhibited lower MHC-II levels and impaired phagocytosis, but higher PD-L1 and IL-10 production, while neutrophils showed reduced TNF-α release and phagocytic activity. Conclusions Our findings characterize the temporal immune dynamics associated with MPE progression in a mouse model, revealing a transition from an early immunostimulatory state to a late immunosuppressive state. This study enhances our understanding of MPE immunopathogenesis and provides a foundation for developing precise, stagespecific therapeutic strategies.

OBJECTIVE To provide standardized guidance for the homogenization construction and management of pharmaceutical care in urban medical groups. METHODS This consensus was jointly initiated by the Therapeutic Drug Monitoring Professional Committee of the Chinese Pharmacological Society and the Expert Committee on Precision Clinical Medication of the Guangdong Pharmaceutical Association. Led by Guangzhou Red Cross Hospital， a drafting group of 7 members and an expert group of 36 members were organized. The outline of the Expert Consensus on Homogeneous Construction and Management of Pharmaceutical Care in Urban Medical Groups （hereinafter referred to as the “Consensus”） was discussed and finalized using the nominal group technique， and a preliminary draft was formed. The Delphi method was used for online c orrespondence review， and 12 external experts were invited for evaluation. After analyzing and revising expert opinions， the final Consensus was formed. RESULTS &CONCLUSIONS This Consensus defines the position setting and appointment procedures for the chief pharmacist， and establishes a three-tier professional guidance network of “chief pharmacist-regional/specialist pharmacist-pharmaceutical liaison of member institutions”. It formulates unified management standards for the drug supply catalog， establishes a full-process homogenization mechanism for prescription review， prescription commentation and comprehensive pharmaceutical care， and specifies the core functions and performance requirements of the prescription review system. It also supports by long-term mechanisms including cost allocation and performance assessment. This consensus can serve as a systematic reference for the homogeneous construction and management of pharmaceutical care systems in urban medical groups.

Objective To enhance the gamma spectrometry analysis and detection capabilities of personnel in measuring radionuclides in bio-ash, and ensure the accuracy and precision of gamma spectrometer in our laboratory for the analysis of radionuclides in bio-ash. Methods The laboratory participated in the 2024 national interlaboratory comparison for radionuclide measurement in bio-ash. Radionuclides ²⁴¹Am, ¹³⁷Cs, and ⁴⁰K in four different bio-ash samples were measured. Based on the measurement methods specified in GB/T 16145—2022, sample measurement, result calculation, and uncertainty evaluation were performed using spectrometry analysis software and sourceless efficiency calibration software. The measurement results and performance evaluation of the laboratory in the comparison were analyzed, and factors affecting gamma-spectrometry measurement and result interpretation were discussed. Results The relative deviation (D) of the measurement results for radionuclides ²⁴¹Am and ¹³⁷Cs in the four bio-ash samples ranged from −10.2% to 2.0% and −1.7% to 0.3%, respectively. The P statistic ranged from 7.0% to 12.5% and 5.0% to 10.8%, respectively. These results met the criteria of |D| ≤ 20% (MARB), |D| ≤ 2.58P, and P ≤ 20% (MARB). The ζ-scores for the measurement of ⁴⁰K in the four bio-ash samples ranged from 0.8 to 1.3, satisfying the criterion of |ζ| < 2. All measurement results in this laboratory in the comparison were satisfactory. Conclusion The laboratory uses a high-purity germanium gamma spectrometer to measure radionuclides in bio-ash. The self-absorption correction method, analysis method, and uncertainty evaluation are appropriate, which can ensure the accuracy and precision of the measurement results. The measurement results are accurate and reliable.

Lung cancer constitutes the most prevalent and lethal malignant tumor in China. Approximately 85% of lung cancer diagnoses correspond to the non-small cell histological subtype [non-small cell lung cancer (NSCLC)]. Despite surgery being the mainstay for early-stage disease, postoperative recurrence remains high and adjuvant chemotherapy offers limited benefit. In recent years, targeted therapy has demonstrated substantial advantages in driver mutation-positive NSCLC. To this end, the Lung Cancer Medical Education Committee of the Chinese Medical Education Association developed guidelines based on a systematic review of evidence through November 2025, using the Grading of Recommendations, Assessment, Development and Evaluations (GRADE) approach and a modified Delphi method. Focusing on epidermal growth factor receptor (EGFR) and anaplastic lymphoma kinase (ALK), and addressing ROS proto-oncogene 1 (ROS1), B-Raf proto-oncogene serine/threonine kinase (BRAF) V600E mutation, and mesenchymal-epithelial transition factor (MET) exon 14 (METex14) skipping, the guideline covers molecular testing, neoadjuvant/adjuvant therapy, perioperative strategies, minimal residual disease monitoring, and postoperative surveillance. It defines testing requirements, specifies stage-directed and subtype-specific treatments, and standardizes minimal residual disease monitoring. These recommendations emphasize precision and feasibility to improve survival and quality of life.

ObjectiveTo characterize the changes of metabolites of Blumea balsamifera in the process of sweating by non-targeted metabolomics， and to investigate the influence of sweating processing on the constituents of B. balsamifera. MethodsUltra performance liquid chromatography-quadrupole/electrostatic field orbitrap high resolution mass spectrometry（UPLC-Q-Exactive Orbitrap-MS） metabolomics was used to identify the metabolites in no sweating group（F1）， sweating 2 d group（F2） and sweating 4 d group（F3）， the differences of metabolites between the groups were compared by principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， and differential metabolites were screened according to the variable importance in the projection（VIP） value>1 and P<0.05， and the pathway enrichment of the differential metabolites was analyzed by Kyoto Encyclopedia of Genes and Genomes（KEGG）. ResultsThe results of PCA and OPLS-DA showed a clear distinction between the three groups of samples， indicating significant differences in the compositions of the three groups of samples. A total of 433 differential metabolites were screened between the F1 and F2， with 154 up-regulated and 279 down-regulated， the significant up-regulated metabolites were tangeritin， 5-O-demethylnobiletin and so on， while the metabolites with significant down-regulation included alternariol， fortunellin， etc. A total of 379 differential metabolites were screened between the F2 and F3， with 150 up-regulated and 229 down-regulated， the significant up-regulated metabolites were isoimperatorin， helianyl octanoate and so on， and the significant down-regulated metabolites were hovenoside I， goyasaponin Ⅲ， etc. KEGG pathway enrichment analysis showed that tyrosine metabolism， isoquinoline alkaloid biosynthesis， phenylalanine， tyrosine and tryptophan biosynthesis， tryptophan metabolism， valine， leucine and isoleucine biosynthesis， pantothenate and coenzyme A biosynthesis may be the key pathways affecting metabolite differences of B. balsamifera after sweating treatment. ConclusionSweating can reduce the content of endophytic mycotoxins in B. balsamifera and has a great impact on the synthesis and metabolic pathways of total flavonoids and auxin. This study can provide a reference for the process research on the sweating conditions of B. balsamifera.

Objective To investigate the screening results and factors affecting abnormal detection rates among high-risk groups of esophageal cancer and to explore effective intervention measures. Methods We investigated and collected the information on gender, education level, age, marital status, symptoms of reflux esophagitis (heartburn, acid reflux, belching, hiccup, foreign body sensation in the pharynx, and difficulty swallowing), consumption of pickled vegetables, salt use, and esophageal cancer incidence of villagers in a natural village in Wenfeng District, Anyang City, Henan Province. Changes in reflux esophagitis symptoms in the high-incidence area of esophageal cancer before and after 16 years were observed, and the relationship of such changes with esophageal cancer was analyzed. Results In 2008, 711 cases were epidemiologically investigated, including 213 cases with one of the symptoms of reflux esophagitis such as heartburn, acid reflux, belching, hiccups, foreign body sensation in the pharynx, and difficulty swallowing (sorted in accordance with the abovementioned symptoms; if there are multiple symptoms, then the former is taken); 55 cases with at least two related symptoms, among which the most symptom was heartburn in 108 cases (15.1%); followed by acid reflux, belching, etc. In 2024, the same group of people was investigated, and eight people were missing because of relocation. A total of 703 people were successfully investigated, of which 189 cases (26.8%) had one of the symptoms of reflux esophagitis, such as heartburn (sorted in accordance with relevant symptoms, if there are multiple symptoms, then the former will be selected); 167 cases (23.7%) had at least two related symptoms, among which the most symptom was heartburn in 139 cases (19.7%); followed by acid reflux. Over 16 years, among the 703 people investigated, 45 cases had esophageal cancer and they had one or more of the abovementioned symptoms. No significant differences in the reflux esophagitis-like symptoms were found between 2008 and 2024 (P=0.26); no significant differences in the composition of reflux esophagitis-like symptoms were found between 2008 and 2024 (P=0.299). Conclusion The detection rate of reflux esophagitis-related symptoms in the population in a high-risk area of esophageal cancer has not decreased in the past 16 years, and the high-risk factors still exist. Esophageal cancer is closely related to reflux esophagitis, and clinical practice can provide early diagnosis and treatment for high-risk population.

The focus of green analytical chemistry(GAC)is to minimize the negative impacts of analytical pro-cedures on human safety,human health,and the environment.Several factors,such as the reagents used,sample collection,sample processing,instruments,energy consumed,and the quantities of hazardous materials and waste generated during analytical procedures,need to be considered in the evaluation of the greenness of analytical assays.In this study,we propose a greenness evaluation metric for analytical methods(GEMAM).The new greenness metric is simple,flexible,and comprehensive.The evaluation criteria are based on both the 12 principles of GAC(SIGNIFICANCE)and the 10 factors of sample prep-aration,and the results are presented on a 0-10 scale.The GEMAM calculation process is easy to perform,and its results are easy to interpret.The output of GEMAM is a pictogram that can provide both qualitative and quantitative information based on color and number.

OBJECTIVE: To explore the accuracy of human-computer interaction software in identifying and locating type C1 distal radius fractures. METHODS: Based on relevant inclusion and exclusion criteria, 14 cases of type C1 distal radius fractures between September 2023 and March 2024 were retrospectively analyzed, comprising 3 males and 11 females(aged from 27 to 82 years). The data were assigned randomized identifiers. A senior orthopedic physician reviewed the films and measured the ulnar deviation angle, radial height, palmar inclination angle, intra-articular step, and intra-articular gap for each case on the hospital's imaging system. Based on the reduction standard for distal radius fractures, cases were divided into reduction group and non-reduction group. Then, the data were sequentially imported into a human-computer interaction intelligent software, where a junior orthopedic physician analyzed the same radiological parameters, categorized cases, and measured fracture details. The categorization results from the software were consistent with manual classifications (6 reduction cases and 8 non-reduction cases). For non-reduction cases, the software performed further analyses, including bone segmentation and fracture recognition, generating 8 diagnostic reports containing fracture recognition information. For the 6 reduction cases, the senior and junior orthopedic physicians independently analyzed the data on the hospital's imaging system and the AI software, respectively. Bone segments requiring reduction were identified, verified by two senior physicians, and measured for displacement and rotation along the X (inward and outward), Z (front and back), and Y (up and down) axes. The AI software generated comprehensive diagnostic reports for these cases, which included all measurements and fracture recognition details. RESULTS: Both the manual and AI software methods consistently categorized the 14 cases into 6 reduction and 8 non-reduction groups, with identical data distributions. A paired sample t-test revealed no statistically significant differences (P>0.05) between the manual and software-based measurements for ulnar deviation angle, radial ulnar bone height, palmar inclination angle, intra-articular step, and joint space. In fracture recognition, the AI software correctly identified 10 C-type fractures and 4 B-type fractures. For the 6 reduction cases, a total of 24 bone fragments were analyzed across both methods. After verification, it was found that the bone fragments identified by the two methods were consistent. A paired sample t-tests revealed that the identified bone fragments and measured displacement and rotation angles along the X, Y, and Z axes were consistent between the two methods. No statistically significant differences(P>0.05) were found between manual and software measurements for these parameters. CONCLUSION Human-computer interaction software employing AI technology demonstrated comparable accuracy to manual measurement in identifying and locating type C1 distal radius fractures on CT imaging.
Humans ; Male ; Female ; Radius Fractures/surgery* ; Middle Aged ; Adult ; Aged ; Aged, 80 and over ; Tomography, X-Ray Computed/methods* ; Retrospective Studies ; Software ; Wrist Fractures

Cervical spine health issues not only seriously affect patients' quality of life but also impose a heavy burden on the social healthcare system. Existing guidelines lack sufficient clinical guidance on lifestyle and work habits, such as exercise, posture, daily routine, and diet, making it difficult to meet practical needs. To address this, relying on the China Association of Chinese Medicine, Wangjing Hospital of China Academy of Chinese Medical Sciences took the lead and joined hands with more than ten institutions to form a multidisciplinary guideline development group. For the first time, the group developed the Guidelines for Cervical Spine Health Intervention based on evidence-based medicine methods, strictly following the standardized procedures outlined in the World Health Organization Handbook for Guideline Development and the Guiding Principles for the Formulation/Revision of Clinical Practice Guidelines in China (2022 Edition). This proposal systematically explains the methods and steps for developing the guideline, aiming to make the guideline development process scientific, standardized, and transparent.
Humans ; Practice Guidelines as Topic/standards* ; Cervical Vertebrae ; China

PURPOSE: To judge the injury mode and injury severity of the real human body through the measured values of anthropomorphic test devices (ATD) injury indices, the mapping relationship of lumbar injury between ATD and human body model (HBM) was explored. METHODS: Through the ATD model and HBM simulation, the mapping relationship of lumbar injury between the 2 subjects was explored. The sled environment consisted of a semi-rigid seat with an adjustable seatback angle and a 3-point seat belt system with a seatback-mounted D-ring. Three seatback recline states of 25°, 45°, and 65° were designed, and the seat pan angle was maintained at 15°. A 23 g, 47 km/h pulse was used. The validity of the finite element model of the sled was verified by the comparison of ATD simulation and test results. ATD model was the test device for human occupant restraint for autonomous vehicles (THOR-AV) dummy model and HBM was the total human model for safety (THUMS) v6.1. The posture of the 2 models was adjusted to adapt to the 3 seat states. The lumbar response of THOR-AV and the mechanical and biomechanical data on L1 - L5 vertebrae of THUMS were output, and the response relationship between THOR-AV and THUMS was descriptive statistically analyzed. RESULTS: Both THOR-AV and THUMS were submarined in the 65° seatback angle case. With the change of seatback angle, the lumbar spine axial compression force (F_z) of THOR-AV and THUMS changed in the similar trend. The maximum F_z ratio of THOR-AV to THUMS at 25° and 45° seatback angle cases were 1.6 and 1.7. The flexion moment (M_y) and the time when the maximum M_y occurred in the 2 subjects were very different. In particular, the form of moment experienced by the L1 - L5 vertebrae of THUMS also changed. The changing trend of M_y measured by THOR-AV over time can reflect the changing trend of maximum stress of L1 and L2 of THUMS. CONCLUSION The F_z of ATD and HBM presents a certain proportional relationship, and there is a mapping relationship between the 2 subjects on F_z. The mapping function can be further clarified by applying more pulses and adopting more seatback angles. It is difficult to map M_y directly because they are very different in ATD and HBM. The M_y of ATD and stress of HBM lumbar showed a similar change trend over time, and there may be a hidden mapping relationship.
Humans ; Lumbar Vertebrae/injuries* ; Finite Element Analysis ; Biomechanical Phenomena ; Manikins ; Spinal Injuries/physiopathology*