ObjectiveTo investigate the influence of histone deacetylase 3 (HDAC3) on the occurrence, development of psoriasis-like inflammation in mice, and the relative immune mechanisms. MethodsHealthy C57BL/6 mice aged 6-8 weeks were selected and randomly divided into 3 groups: control group (Control), psoriasis model group (IMQ), and HDAC3 inhibitor RGFP966-treated psoriasis model group (IMQ+RGFP966). One day prior to the experiment, the back hair of the mice was shaved. After a one-day stabilization period, the mice in Control group was treated with an equal amount of vaseline, while the mice in IMQ group was treated with imiquimod (62.5 mg/d) applied topically on the back to establish a psoriasis-like inflammation model. The mice in IMQ+RGFP966 group received intervention with a high dose of the HDAC3-selective inhibitor RGFP966 (30 mg/kg) based on the psoriasis-like model. All groups were treated continuously for 5 d, during which psoriasis-like inflammation symptoms (scaling, erythema, skin thickness), body weight, and mental status were observed and recorded, with photographs taken for documentation. After euthanasia, hematoxylin-eosin (HE) staining was used to assess the effect of RGFP966 on the skin tissue structure of the mice, and skin thickness was measured. The mRNA and protein expression levels of HDAC3 in skin tissues were detected using reverse transcription real-time quantitative polymerase chain reaction (RT-qPCR) and Western blot (WB), respectively. Flow cytometry was employed to analyze neutrophils in peripheral blood and lymph nodes, CD4⁺ T lymphocytes, CD8⁺ T lymphocytes in peripheral blood, and IL-17A secretion by peripheral blood CD4⁺ T lymphocytes. Additionally, spleen CD4⁺ T lymphocyte expression of HDAC3, CCR6, CCR8, and IL-17A secretion levels were analyzed. Immunohistochemistry was used to detect the localization and expression levels of HDAC3, IL-17A, and IL-10 in skin tissues. ResultsCompared with the Control group, the IMQ group exhibited significant psoriasis-like inflammation, characterized by erythema, scaling, and skin wrinkling. Compared with the IMQ group, RGFP966 exacerbated psoriasis-like inflammatory symptoms, leading to increased hyperkeratosis. The psoriasis area and severity index (PASI) skin symptom scores were higher in the IMQ group than those in the Control group, and the scores were further elevated in the IMQ+RGFP966 group compared to the IMQ group. Skin thickness measurements showed a trend of IMQ+RGFP966>IMQ>Control. The numbers of neutrophils in the blood and lymph nodes increased sequentially in the Control, IMQ, and IMQ+RGFP966 groups, with a similar trend observed for CD4⁺ and CD8⁺ T lymphocytes in the blood. In skin tissues, compared with the Control group, the mRNA and protein levels of HDAC3 decreased in the IMQ group, but RGFP966 did not further reduce these expressions. HDAC3 was primarily located in the nucleus. Compared with the Control group, the nuclear HDAC3 content decreased in the skin tissues of the IMQ group, and RGFP966 further reduced nuclear HDAC3. Compared with the Control and IMQ groups, RGFP966 treatment decreased HDAC3 expression in splenic CD4⁺ and CD8⁺ T cells. RGFP966 treatment increased the expression of CCR6 and CCR8 in splenic CD4⁺ T cells and enhanced IL-17A secretion by peripheral blood and splenic CD4⁺ T lymphocytes. Additionally, compared with the IMQ group, RGFP966 reduced IL-10 protein levels and upregulated IL-17A expression in skin tissues. ConclusionRGFP966 exacerbates psoriatic-like inflammatory responses by inhibiting HDAC3, increasing the secretion of the cytokine IL-17A, and upregulating the expression of chemokines CCR8 and CCR6.

ObjectiveTo elucidate the critical role of rehabilitation medical records (including electronic records) in rehabilitation medicine's clinical practice and management, comprehensively analyzed the structure, core content and data standards of rehabilitation medical records, to develop a standardized medical record data architecture and core dataset suitable for rehabilitation medicine and to explore the application of rehabilitation data in performance evaluation and payment. MethodsBased on the regulatory documents Basic Specifications for Medical Record Writing and Basic Specifications for Electronic Medical Records (Trial) issued by National Health Commission of China, and referencing the World Health Organization (WHO) Family of International Classifications (WHO-FICs) classifications, International Classification of Diseases (ICD-10/ICD-11), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), this study constructed the data architecture, core content and data standards for rehabilitation medical records. Furthermore, it explored the application of rehabilitation record summary sheets (home page) data in rehabilitation medical statistics and payment methods, including Diagnosis-related Groups (DRG), Diagnosis-Intervention Packet (DIP) and Case Mix Index. ResultsThis study proposed a systematic standard framework for rehabilitation medical records, covering key components such as patient demographics, rehabilitation diagnosis, functional assessment, rehabilitation treatment prescriptions, progress evaluations and discharge summaries. The research analyzed the systematic application methods and data standards of ICD-10/ICD-11, ICF and ICHI Beta-3 in the fields of medical record terminology, coding and assessment. Constructing a standardized data structure and data standards for rehabilitation medical records can significantly improve the quality of data reporting based on the medical record summary sheet, thereby enhancing the quality control of rehabilitation services, effectively supporting the optimization of rehabilitation medical insurance payment mechanisms, and contributing to the establishment of rehabilitation medical performance evaluation and payment based on DRG and DIP. ConclusionStructured rehabilitation records and data standardization are crucial tools for quality control in rehabilitation. Systematically applying the three reference classifications of the WHO-FICs, and aligning with national medical record and electronic health record specifications, facilitate the development of a standardized rehabilitation record architecture and core dataset. Standardizing rehabilitation care pathways based on the ICF methodology, and developing ICF- and ICD-11-based rehabilitation assessment tools, auxiliary diagnostic and therapeutic systems, and supporting terminology and coding systems, can effectively enhance the quality of rehabilitation records and enable interoperability and sharing of rehabilitation data with other medical data, ultimately improving the quality and safety of rehabilitation services.

ObjectiveBy comparing the composition and content of volatile components in raw products， wine-washed products and wine-fried products of Ligusticum sinense cv. Chaxiong rhizome（LSCR）， to investigate the influence of wine processing on the volatile components of LSCR， in order to provide a basis for the development of quality standards for LSCR and its processed products. MethodsElectronic nose was used to identify the odors of LSCR， wine-washed and wine-fried LSCR， and their volatile components were detected by headspace gas chromatography-mass spectrometry（HS-GC-MS）， and the relative mass fractions of these components were determined by peak area normalization method. Principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） were performed on the obtained sample data by SIMCA 14.1 software， and the differential components of LSCR， wine-washed and wine-fried LSCR were screened according to the variable importance in the projection（VIP） value>1. Pearson correlation analysis was used to explore the relationship between volatile differential flavor components and electronic nose sensors. ResultsElectronic nose detection results showed that there were significant differences in the odors of LSCR， wine-washed and wine-fried LSCR， mainly reflected in the sensors S2， S4， S5， S6， S11， S12， S13. And a total of 62 compounds were identified from LSCR and its wine-processed products， among which 46， 50 and 51 compounds were identified from LSCR， wine-fried and wine-washed LSCR， respectively. There were 21 differential components between the raw products and wine-fried products， of which 10 components were increased and 11 were decreased after processing. There were 20 differential components between the raw products and wine-washed products， of which 11 constituents increased and 9 decreased after processing. There were 17 differential components between the wine-wash products and wine-fried products. Compared with the wine-washed products， the contents of 13 components in the wine-fried products increased， and the contents of 4 components decreased. The increasing trend of the content of phthalides in the wine-washed products was more obvious than that in the wine-fried products， but the content of total volatile components was higher in the wine-fried products than the wine-washed products. Correlation analysis showed that there were different degrees of correlation between the 7 differential sensors of electronic nose and 24 differential volatile components， mainly phthalides and olefins. ConclusionThe odor and the content of volatile components in LSCR changed obviously after wine processing， and n-butylphthalide， Z-butylidenephthalide and E-ligustilide can be used as the candidate differential markers of volatile components in LSCR before and after wine processing.

ObjectiveTo understand the whole genome characteristics and the information for genetic evolution in the two coxsackievirus A2 (CVA2) strains isolated from patients with herpangina in Shanghai, and to provide a scientific basis for the prevention and treatment of herpetic angina. MethodsTwo CAV2 strains isolated from patients with herpetic angina in Shanghai were performed whole genome sequencing and analysis for phylogenetics, nucleotide homology, and evolution. ResultsA phylogenetic analysis of the VP1 region revealed that the two Shanghai strains both belonged to CVA2 genotype D, with the highest homology to OL357660, a strain from Yunnan. The average nucleotide identity (ANI) of the whole genome between the two Shanghai strains was 98.88%, and the ANI of the whole genome comparisons to other CVA2 genotype D strains and CVA2 genotypes A-C strains ranged from 84.64% to 97.42% and from 79.21% to 84.20%, respectively. The two Shanghai strains had low homology in the 3D region compared to the existing CVA2 strains. The phylogenetic analysis and sliding window nucleotide similarity analysis indicated that the two Shanghai strains and the Yunnan OL357660 strain might constitute a new genetic lineage. ConclusionThe two CVA2 strains isolated for the first time in Shanghai are assigned to genotype D (GenBank: PQ130039 and PQ130040), which is identical to the existing subtype prevalent in China. As represented by the Shanghai strains, a new CVA2 genetic lineage is been identified. This study has enriched the data on genetic evolution and genetic variation of CVA2 in Shanghai, indicating the requirement to strengthen surveillance for the epidemiological pattern of CVA2.

Objective: To investigate the indoor fine particulate matter (PM 2.5 ) pollution and its influencing factors in children s bedrooms using solid fuel, so as to provide evidence for effective strategy to reduce PM 2.5 pollution. Methods: From December 2019 to November 2020, 198 households (108 in the north, 90 in the south) from two pilots in the north(Jiamusi in Heilongjiang Province) and south of China (Mianyang in Sichuan Province) were selected, and status of solid fuels using were obtained through home visits, dynamic changes in PM 2.5 concentrations in children s bedrooms were monitored by using real time online instruments, and the influencing factors of PM 2.5 pollution were analyzed by using a mixed effects model. Results: During the monitoring period, the daily PM 2.5 concentrations in the northern and southern pilot were 78.33 (40.50, 154.80) and 38.54(26.20, 58.46) μg/m 3, respectively, exceeding standard rates of 44.57% and 33.22%. During the heating period, the daily PM 2.5 concentrations in the northern and southern pilot were 212.50(133.60,244.10) and 104.42(73.97, 134.90) μg/m 3, respectively, with over standard rates of 96.75% and 86.96%. The mixed effects model analysis results showed that children s bedroom PM 2.5 concentrations were associated with solid fuel usage duration, window opening time, room layout (shared entrance door between kitchen and bedroom), indoor smoking, indoor humidity, and solid fuel use in the bedroom ( β =0.19, -0.05, 1.20, 0.43, 0.02, 0.35, all P <0.05). Conclusion Solid fuel combustion significantly comtributes to PM 2.5 pollution in children s bedrooms, with more pronounced impacts observed in northern China compared to southern regions.

ObjectiveTo reveal the changing pattern of fungal communities and isoflavone content during the fermentation of Sojae Semen Praeparatum. MethodsInternal transcribed spacer （ITS） amplicon sequencing was used to analyze the changes in fungal communities during the fermentation. High-performance liquid chromatography （HPLC） was employed to determine the composition and content of isoflavones. Spearman correlation analysis was conducted to identify fungal communities positively correlated with isoflavone content. ResultsDuring the fermentation of Sojae Semen Praeparatum， the abundance of Penicillium continued to increase and became the dominant genus from the "yellow cladding" to the early "secondary fermentation" stage （9 days）. However， in the mid-to-late "secondary fermentation" stage （12-21 days）， the abundance of Penicillium decreased， while the abundance of Barnettozyma increased rapidly， becoming the dominant genus during the later stages （18-21 days）. Alpha diversity analyses showed that fungal diversity was higher in the "secondary fermentation" stage than in the "yellow cladding" stage. Beta diversity analyses showed greater variability in fungal communities during the "yellow cladding" stage， with relatively stable fungal communities during the "secondary fermentation" stage. The aglycone isoflavone content exhibited a gradual increase， rising from 5.56% at the start of fermentation to 96.84% by the end. In contrast， the glucoside isoflavone content experienced a corresponding decline， decreasing from 94.44% to 3.16%. Spearman analysis showed that Penicillium， Barnettozyma， and Ilyonectria were positively correlated with the contents of daidzein， glycitein， and genistein， and promoted the conversion of isoflavones from glucoside to aglycone forms. ConclusionThe fungal communities of Penicillium， Barnettozyma， and Ilyonectria promote the conversion of isoflavones from glucoside to aglycone forms during the fermentation of Sojae Semen Praeparatum. The findings provide an important reference for improving the scalability and quality of Sojae Semen Praeparatu fermentation.

Primary liver cancer is one of the most common malignant tumors of the digestive system， and the “inflammation-to-cancer transformation” （ICT） of chronic hepatitis is the core pathological process of the progression of chronic hepatitis to liver cancer. Persistent and uncontrolled liver inflammation in patients with chronic hepatitis often leads to repeated liver tissue damage and repair， which gradually develops into liver fibrosis and cirrhosis， eventually leading to malignant transformation through the mechanisms such as gene mutation and microenvironment imbalance. ICT in chronic hepatitis is the key link between chronic hepatitis and liver cancer， and its dynamic evolution involves various pathogenic factors such as dampness， heat， deficiency， toxin， and stasis； among which damp-heat and vital energy deficiency are the initiating factors for ICT of chronic hepatitis， while intermingled stasis and toxin are the key pathological products that promote malignant transformation. Based on the concept of preventive treatment， traditional Chinese medicine can effectively delay and even block the ICT of chronic hepatitis by regulating inflammation， metabolism， and abnormal cell proliferation through multiple targets， which provides important strategies and research directions for the prevention and treatment of liver cancer.

Background::Breast cancer is ranked among the most prevalent malignancies in the Chinese female population. However, comprehensive reports detailing the latest epidemiological data and attributable disease burden have not been extensively documented.Methods::In 2018, high-quality cancer surveillance data were recorded in 700 population-based cancer registries in China. We extracted data on female breast cancers (International Classification of Diseases, Tenth Revision [ICD-10]: C50) and estimated the incidence and mortality in 2022 according to the baseline data and corresponding trends from 2010 to 2018. Pathological types were classified according to the ICD for Oncology, 3rd Edition codes. Disability-adjusted life years (DALYs) were calculated as the sum of the years of life lost (YLLs) and years lived with disability (YLDs).Results::In 2022, approximately 357,200 new female breast cancer cases and 75,000 deaths occurred in China, accounting for 15.59% and 7.94% of total new cancer cases and deaths, respectively. The age-standardized incidence rate (ASIR) was 33.04 per 100,000. When analyzed by pathological type, the ASIRs for papillary neoplasms, invasive breast carcinoma, rare and salivary gland-type tumors, and other types were 1.13, 29.79, 0.24, and 1.88 per 100,000, respectively. The age-standardized mortality rate (ASMR) was 6.10 per 100,000. A total of 2,628,000 DALYs were found to be attributable to female breast cancer in China, comprising 2,278,300 YLLs and 349,700 YLDs. The ASIR, ASMR, and age-standardized rate (ASR) for DALYs in urban areas were consistently higher than those in rural areas. We observed a four-fold increase in the ASIR and ASR for DALYs and an eight-fold increase in the ASMR among females over 55 years compared with those aged under 55 years.Conclusion::These data provide invaluable insights into the latest epidemiology of female breast cancer in China and highlight the urgency for disease prevention and control strategy formulation.

Objective To explore clinical outcomes and bone resection of interlaminar fenestration decompression and u-nilateral biportal endoscopic(UBE)technique in treating lumbar disc herniation(LDH).Methods A retrospective study was performed on 105 patients with single-level LDH treated from December 2019 to December 2021.Fifty-four patients in UBE group,including 32 males and 22 females,aged from 18 to 50 years old with an average of(38.7±9.3)years old,were treated with UBE,29 patients withL4.5and 25 patients with L5S1.There were 51 patients in small fenestration group,including 27 males and 24 females,aged from 18 to 50 years old with an average of(39.9±10.0)years old,were treated with small fenestra-tion,25 patients with L4.5 and 26 patients with L5S1.Perioperative indexes,such as operation time,postoperative time of getting out of bed and hospital stay were observed and compared between two groups.Visual analogue scale(VAS)and Oswestry dis-ability index(ODI)were compared between two groups before operation and 1,3,6 and 12 months after operation,respective-ly;and modified MacNab evaluation criteria was used to evaluate clinical efficacy.Amount of bone resection and retention rate of inferior articular process laminoid complex were compared between two groups.Results All 105 patients were successfully completed operation.Both of two groups were followed up from 6 to 12 months with an average of(10.69±2.49)months.Oper-ation time,postoperative time of getting out of bed and hospital stay were(58.20±5.54)min,(2.40±0.57)dand(3.80±0.61)d in UBE group,and(62.90±7.14)min,(4.40±0.64)d and(4.40±0.64)d in small fenestrum group,respectively;and had sta-tistically difference between two groups(P＜0.05).Postoperative VAS of low back and leg pain and ODI in both groups were significantly lower than those before surgery(P＜0.05).VAS of lumbar pain in UBE group(1.37±0.49)score was lower than that of small fenestration group(2.45±0.64)score,and had statistically difference(t=9.745,P＜0.05).Postoperative ODI in UBE group at 1 and 3 months were(28.54±3.31)％and(22.87±3.23)％,respectively,which were lower than those in small fenestra group(36.31±9.08)％and(29.90±8.36)％,and the difference was statistically significant(P＜0.05).There were no significant difference in VAS and ODI between two groups at other time points(P＞0.05).According to the modified MacNab evaluation criteria at the latest follow-up,49 patients got excellent result,3 good,and 2 fair in UBE group.In small fenestration group,35 patients got excellent,12 good,and 4 fair.In UBE group,amount of bone resection on L4,5 segment was(0.45±0.08)cm3 and(0.31±0.08)cm3 on the segment of L5S1.In small fenestration group,amount of bone resection on L4.5 segment was(0.57±0.07)cm3 and(0.49±0.04)cm3 on the segment of L5S1,and amount of bone resection of lower articular process laminar complex on the same segment in UBE group was less than that in small fenestration group(P＜0.05).In UBE group,retention rate of laminoid complex on L4,5 segment was(0.73±0.04)and L5S1 segment was(0.83±0.03),whileL4,5segment was(0.68± 0.06)and L5S1 segment was(0.74±0.04)in small fenestration group,the lower articular process laminar complex retention rate in UBE group was higher than that in small fenestration group(P＜0.05).Conclusion Both unilateral double-channel endoscopy and small fenestration of laminae could achieve good clinical results in treating LDH,but UBE has advantages of less trauma,higher eficiency,faster postoperative recovery and less damage to bone structure.

Objective To explore feasibility of 3D metal printing technology combined with virtual design proximal clavicle anatomical plate.Methods A 52-year-old male healthy volunteer was retrospectively selected to design proximal clavicle anatomical plate system by using Mimics15.01,NX12.0 and other software.STL data were input into 3D printer to print 1∶1 clavicle model and proximal clavicle anatomical plate.The fit of the plate was tested in vitro and the accuracy of screw position was evaluated by imaging.Printing time of model,nail path design and fabrication time of the anatomical plate at proximal clavicle were recorded.Results The 3D metal printing proximal clavicle anatomical plate fitted well to clavicle model,orienta-tion of proximal clavicle locking screw was accurate,and X-ray and CT scan showed the screw position was good.Printing time of model,the time of nail path design,and the time of making anatomical plate of proximal clavicle were 120,15 and 300 min respectively.Conclusion The proximal clavicular anatomical plate system based on 3D metal printing technology could achieve good lamination of proximal clavicular fracture plate and precise screw placement,providing a new and accurate surgical method for the treatment of the proximal clavicular fracture.