ObjectiveBased on traditional quality evaluation of Gardeniae Fructus（GF） recorded in historical materia medica， this study systematically compared the quality differences between wild and cultivated GF from morphological characteristics， microscopic features， and contents of primary and secondary metabolites. MethodsVernier calipers and analytical balances were used to measure the length， diameter and individual fruit weight of wild and cultivated GF， and the aspect ratio was calculated. A colorimeter was used to determine the chromaticity value of wild and cultivated GF， and the paraffin sections of them were prepared by safranin-fast green staining and examined under an optical microscope to observe their microstructure. Subsequently， the contents of water-soluble and alcohol-soluble extracts of wild and cultivated GF were detected by hot immersion method under the general rule 2201 in volume Ⅳ of the 2020 edition of the Pharmacopoeia of the People's Republic of China， the starch content was measured by anthrone colorimetric method， the content of total polysaccharides was determined by phenol-sulfuric acid colorimetric method， the sucrose content was determined by high performance liquid chromatography coupled with evaporative light scattering detection（HPLC-ELSD）， and the contents of representative components in them were measured by ultra-performance liquid chromatography（UPLC）. Finally， correlation analysis was conducted between quality traits and phenotypic traits， combined with multivariate statistical analysis methods such as principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， key differential components between wild and cultivated GF were screened. ResultsIn terms of traits， the wild GF fruits were smaller， exhibiting reddish yellow or brownish red hues with significant variation between batches. While the cultivated GF fruits are larger， displaying deeper orange-red or brownish red. The diameter and individual fruit weight of cultivated GF were significantly greater than those of wild GF， while the blue-yellow value（b^*） of wild GF was significantly higher than that of cultivated GF. In the microstructure， the mesocarp of wild GF contained numerous scattered calcium oxalate cluster crystals， while the endocarp contained stone cell class round， polygonal or tangential prolongation， undeveloped seeds were visible within the fruit. In contrast， the mesocarp of cultivated GF contained few calcium oxalate cluster crystals， or some batches exhibited extremely numerous cluster crystals. The stone cells in the endocarp were predominantly round-like， with the innermost layer arranged in a grid pattern. Seeds were basically mature， and only a few immature seeds existed in some batches. Regarding primary metabolite content， wild GF exhibited significantly higher total polysaccharide level than cultivated GF（P<0.01）. In category-specific component content， wild GF exhibited significantly higher levels of total flavonoids and total polyphenols compared to cultivated GF（P<0.01）. Analysis of 12 secondary metabolites revealed that wild GF exhibited significantly higher levels of Shanzhiside， deacetyl asperulosidic acid methyl ester， gardenoside and chlorogenic acid compared to cultivated GF（P<0.01）. Conversely， the contents of genipin 1-gentiobioside， geniposide and genipin were significantly lower in wild GF（P<0.01）. ConclusionThere are significant differences between wild and cultivated GF in terms of traits， microstructure， and contents of primary and secondary metabolites. At present， the quality evaluation system of cultivated GF remains incomplete， and this study provides a reference for guiding the production of high-quality GF medicinal materials.

Objective: To explore the association between takeout fast foods and sugar sweetened beverage consumption with co-occurrence of anxiety and depressive symptoms among first year junior high school students in Yunnan Province, so as to provide theoretical basis for the prevention of anxiety and depressive symptoms co-occurrence among adolescents. Methods: A random cluster sampling involving 8 500 first year junior high school students in 11 counties in Yunnan Province was conducted by a questionnaire survey from October to December 2022. The Depression Anxiety Stress Scale-21 (DASS-21) was applied to assess anxiety and depressive symptoms in first year junior high school students. Chi-square test was used to compare the anxiety-depression co-occurrence symptoms of first year junior high school students with different demographic characteristics. The association between takeout fast foods and sugar sweetened beverage consumption with co-occurrence of anxiety and depressive symptoms of adolescents was analyzed by binary Logistic regression models. Results: The detection rate of co-occurrence of anxiety and depression symptoms among first year junior high school students in Yunnan Province was 26.92%. After controlling for demographic variables and other confounders, takeout fast foods and sugar sweetened beverage consumption( OR=1.50, 95%CI =1.27-1.77) was associated with anxiety-depression co-occurrence symptoms among first year junior high school students in Yunnan Province ( P <0.01). Stratified analysis showed that both Han ( OR=1.37, 95%CI =1.07-1.77) and ethnic minorities ( OR=1.60, 95%CI =1.29-2.00) exhibited statistically significant associations between takeout fast foods and sugar sweetened beverage consumption with co-occurrence of anxiety and depressive symptoms(both P <0.05). Conclusions Takeout fast foods and sugar sweetened beverage consumption increases the risk of co-occurrence of anxiety and depressive symptoms among first year junior high school students in Yunnan Province. It is recommended to strengthen guidance on the consumption of such products among junior high school students to prevent co-occurrence of anxiety and depressive symptoms.

A growing body of research points out that gut microbiota plays a key role in tumor immunotherapy. By optimizing the composition of intestinal microbiota, it is possible to effectively improve immunotherapy resistance and enhance its therapeutic effect. This article comprehensively analyzes the mechanism of intestinal microbiota influencing tumor immunotherapy resistance, expounds the current strategies for targeted regulation of intestinal microbiota, such as traditional Chinese medicine and plant components, fecal microbiota transplantation, probiotics, prebiotics and dietary therapy, and explores the potential mechanisms of these strategies to improve patients' resistance to tumor immunotherapy. At the same time, the article also briefly discusses the prospects and challenges of targeting intestinal microbiota to improve tumor immunotherapy resistance, which provides a reference for related research to help the strategy research of reversing tumor immunotherapy resistance.

ObjectiveUltra performance liquid chromatography-quadrupole-time of flight tandem mass spectrometry （UPLC-Q-TOF-MS/MS） coupled with network pharmacology and molecular docking was utilized to explore the efficacy and mechanism of action of Ermiao Situ decoction on rats with damp-heat eczema. MethodsA rat model of damp-heat eczema was established by artificial climate chamber intervention combined with sensitization induction by dinitrochlorobenzene （DNCB）， and it was randomly divided into the normal group， the model group， the medium- and high-dose groups of Ermiao Situ decoction （3.40 g·kg^-1 and 6.80 g·kg^-1）， and the prednisone acetate group （2.51 mg·kg^-1）， with eight rats in each group， totalling 46 rats， of which six rats were tested with the drug-containing serum. The chemical analysis of drug-containing serum from rats was carried out by UPLC-Q-TOF-MS/MS， combined with network pharmacology for the prediction of key components， core targets， and signaling pathways， and molecular docking experiments were performed by CB-Dock2 online website. The pharmacological effects of Ermiao Situ decoction in the treatment of damp-heat eczema were investigated by epitaxial indexes combined with the pathologic tissue staining method. The serum levels of gastrin （GAS）， interleukin-4 （IL-4）， and interleukin-13 （IL-13） were measured by enzyme-linked immunosorbent assay （ELISA）. Interleukin-6 （IL-6）， Janus kinase 1 （JAK1）， phosphorylated （p）-JAK1， signal transduction and activation of transcription factor 3 （STAT3）， and p-STAT3 protein expression level was determined by Western bolt. ResultsA total of 19 active ingredients were detected in drug-containing serum samples of rats， which were predicted to act on 198 targets for the treatment of damp-heat eczema， among which the key ingredients included rhodopsin， huangpai alkaloids， and quercetin， and the main core targets included STAT3， tumor necrosis factor （TNF）， and IL-6， which were mainly involved in the cancer signaling pathway， phosphatidylinositol 3-kinase （PI3K）/protein kinase （Akt） signaling pathway， T helper 17 （Th17） cell differentiation signaling pathway， and JAK/STAT signaling pathway. The molecular docking results suggested that the key components had strong binding activities with the core targets IL-6， JAK1， and STAT3 in the JAK/STAT signaling pathway. The results of animal experiments showed that compared with those in the normal group， rats in the model group were depressed. They had loose hair， loose stools， epidermal oozing， vesiculation， and generation of thick scabs in the form of scales， decreased body weight， increased anus temperature and water intake， and increased indexes of the spleen， thymus gland， and stomach （P<0.05， P<0.01）， and the lesion tissue could be seen to be hyperkeratotic， with the aggregation of inflammatory cells and nonsignificant separation of epidermis and dermis. The gastric mucosa was thinned， deficient， and structurally disorganized， and obvious inflammatory cell aggregation was seen. The levels of GAS， IL-4， and IL-13 in serum were significantly reduced （P<0.05， P<0.01）， and the protein expression levels of IL-6， JAK1， p-JAK1， and p-STAT3 in the lesion tissue were significantly increased （P<0.05， P<0.01）. Compared with those in the model group， rats in each administration group had stable mental states， formed feces， a clean perianal area， and basically normal epidermis. Only a small amount of scaly scabs existed， and the rats had body weight increased， with decreased anal temperature and water intake， as well as decreased spleen， thymus， and gastric indexes （P<0.05， P<0.01）. Epidermal thickness was decreased， and epidermal and dermal separation boundaries were obvious， but hyperkeratotic and accumulation of inflammatory cells could still be seen. The thickness of gastric mucosa increased， and the structure was restored to varying degrees. The levels of GAS， IL-4， and IL-13 content in the serum of rats were increased to varying degrees， and the protein expression levels of IL-6， JAK1， p-JAK1， and p-STAT3 in the dermal lesion tissue were significantly decreased （P<0.05， P<0.01）. ConclusionErmiao Situ decoction may exert therapeutic effects on rats with damp-heat eczema by modulating the JAK/STAT signaling pathway.

Objective: To explore the influencing factors and network structure of aggressive behaviors among college students based on propensity score matching (PSM), so as to provide precise targeted interventions for the prevention and improvement of aggressive behaviors among college students. Methods: A total of 2 652 college students were selected by convenient sampling method from three colleges in Wuhan, Hubei Province in June 2023. Questionnaire surveys were carried out by using the Buss-Warren Aggression Questionnaire (BWAQ), Ruminative Responses Scale (RRS), Cognitive Emotion Regulation Questionnaire-Chinese Version (CERQ-C), Family APGAR Index (APGAR) ,Brief Fear of Negative Evaluation Scale (BFNES).By bias score matching (PSM) for 1∶1 matching, univariate and multivariate Logistic regression analysis, and network analysis were conducted on the college students. Results: College students with higher levels of ruminant thinking，non adaptive emotional regulation and fear of negative appraisal were more likely to have highly aggressive behaviors（ OR =1.14，1.18，1.06），and those with higher adaptive emotional regulation and family care index were more likely to have highly aggressive behaviors ( OR =0.88，0.82)( P < 0.01 ). Network structure was significantly different between the two groups ( M =0.27, P <0.05). The core affective factors of college students with high levels of aggressive behavior were brooding reflective pondering and symptom rumination( EI =3.50, 3.49, 3.48 )，low aggressive behavior college students core affective factors were adaptive emotion regulation growth and non adaptive emotion regulation( EI =4.37, 4.12, 4.08). Conclusion Factors affecting Chinese college students aggressive behaviors are of different characteristics on different behaviour types, and targeted interventions should be adopted to reduce aggressive behaviors of college students.

Under the current legal framework， living will， as an important legal tool for safeguarding patients’ autonomy and dignity， have been widely recognized and implemented in many countries and regions. In China， the promotion of living will also has a solid legal foundation， with their legitimacy reflected in several provisions of the Civil Code of the People’s Republic of China. One of the highlights of the Medical Regulations of the Shenzhen Special Economic Zone （revised in 2022） is the clarification of the legal effect of living will. To ensure that patients’ living will can be accurately implemented at critical moments， the rights and obligations of patients， family members， and healthcare professionals should be clearly defined within the legal framework， and clear guidance should be provided at every stage of implementation.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.