Objective To optimize the extraction, separation and purification process of Actinoside E. Methods Single factor experiment combined with orthogonal test was used to determine the optimal extraction process of Actinoside E using its content as an index. The extracts were separated and purified by optimizing the chromatographic conditions of macroporous resin, silica gel and ODS column. Results 25 times amount of 55% ethanol with heating reflux at 95℃ for one hour were used as the optimal extraction process of Actinoside E. The optimum separation and purification process was as follows: D101 macroporous resin column was eluted with 7 BV of 50% ethanol, silica gel column was eluted with 5 BV of ethyl acetate-ethanol（10∶1）and 50% methanol eluted fraction was purified repeatedly by ODS column to obtain Actinoside E. The transfer rate of Actinoside E in the whole process was 53.70%, the yield was 0.35%, and the purity was 99.9%. Conclusion The process is stable and viable, which can provide material foundation for the development and utilization of Actinoside E.

Asarum forbesii is a perennial herb born in a shaded and humid environment, which is warm in nature. With the efficacy of warming lung, resolving fluid retention, and relieving coughs, it can be used to treat the syndrome of cold fluid accumulating in lung. To investigate the effects of different shading conditions on the composition and efficacy of A. forbesii, this study planted A. forbesii under 20% natural light(NL20), 40% natural light(NL40), 60% natural light(NL60), and 80% natural light(NL80) and utilized ultra performance liquid chromatography(UPLC) and micro broth 2-fold dilution method to detect the volatile chemical compounds and the minimum inhibitory concentration. At the same time, the study investigated the effects of A. forbesii grown under different shading conditions on the signs, pathological changes of lung tissues, serum cytokine levels, activities of mitochondrial respiratory chain complexes Ⅰ-Ⅴ in lung tissues, and relative expression of related genes of mice with syndrome of cold fluid accumulating in lung. The results indicated that with the increase of shading, the content of kakuol, methyl eugenol, and asarinin in A. forbesii and the antibacterial effect showed a tendency of increasing first and then decreasing, and the NL40 group was significantly better than the other groups. Under the conditions of NL20 and NL40, A. forbesii significantly alleviated the pathological damage to lung tissues, restored the homeostasis of the lung, and enhanced the energy metabolism level of mice with syndrome of cold fluid accumulating in lung. In addition, A. forbesii planted under the two conditions reduced the content of interleukin-8(IL-8), interleukin-13(IL-13), tumor necrosis factor-α(TNF-α), and mucin 5AC(MUC5AC), increased the levels of interleukin-10(IL-10) and aquaporin 1(AQP1), lowered the expression of MMP9, VEGF, TGF-β, and MAPK3. In conclusion, the therapeutic effect of A. forbesii on the syndrome of cold fluid accumulating in lung was positively correlated with the degree of shading, and the chemical composition and efficacy of warming lung and resolving fluid retention were optimal under the conditions of NL20-NL40. This study can provide reference for the pharmacological research and cultivation of A. forbesii.
Animals ; Mice ; Lung/pathology* ; Drugs, Chinese Herbal/administration & dosage* ; Male ; Light ; Cytokines/genetics* ; Humans

PURPOSE: Although there are significant differences between China and the United States (US) in trauma medical services, there has been no direct comparative research on the epidemiological data of trauma centers between the 2 countries. This study aims to fill this research gap by directly comparing trauma centers in China and the US, providing valuable data and insights for the development of trauma centers in both countries, promoting academic exchange and cooperation internationally, and enhancing the level of global trauma medical care. METHODS: This is a multicenter retrospective descriptive study. Data were collected for trauma patients with an injury severity score ≥16 treated from September 2013 to September 2019 at 2 hospital trauma centers in these 2 countries. Detailed clinical data (including injury mechanism, age, injury site, injury severity score, pre-hospital transport time, whether blood transfusion was performed, whether resuscitative thoracotomy was conducted, hospital and intensive care unit stay duration, the number of organ donor patients, mortality rates, and costs) were meticulously compiled and retrospectively analyzed to identify differences between the 2 trauma centers. The comparison was conducted using SPSS 23 software. Continuous variables are reported as median (Q₁, Q₃), and Mann Whitney U test is used to compare the median of continuous variables. Use clinically relevant critical points to classify continuous variables, with categorical variables represented as n (%), and comparisons were made between the 2 groups using the χ² test or Fisher's exact test. Statistical significance was defined as a 2-sided p < 0.05. RESULTS: These results point to significant differences in trauma center capacity, pre-hospital transport times, treatment procedures, hospital stay duration, mortality rates, and costs between the 2 centers. The volume of patients in trauma centers is less in China (2465 vs. 5288). Pre-hospital transport time was notably longer in China (180 min vs. 14 min), and the rate of emergency blood transfusions was lower in China (18.4% vs. 50.6%), Emergency thoracotomy was not performed in China but was conducted in 9.8% of cases in the US. Hospitalization costs were significantly lower in China than in the US ($5847 vs. $75,671). CONCLUSION There are clear differences in trauma center capacity (number of patients treated), pre-hospital transport time, age distribution of injured patients, injury mechanisms, injury sites, whether emergency thoracotomy is performed, hospital costs, and length of stay between the 2 trauma centers in China and America. Understanding these differences can help us further recognize the characteristics of Eastern and Western trauma patients.
Humans ; China/epidemiology* ; Trauma Centers/statistics & numerical data* ; Retrospective Studies ; United States/epidemiology* ; Male ; Female ; Wounds and Injuries/therapy* ; Middle Aged ; Adult ; Injury Severity Score ; Length of Stay/statistics & numerical data* ; Treatment Outcome

Objective To explore the potential categories of psychosocial adaptation in psoriasis patients and their differences in social alienation.Methods Using a cross-sectional survey design,convenience sam-pling was used to select 376 psoriasis patients from multiple hospitals in Shandong Province from September to December 2022.Participants completed the general information questionnaire,Psychosocial Adaptation to Illness Scale(PAIS-SR),Acceptance and Action Questionnaire-Ⅱ(AAQ-2),and General Alienation Scale(GAS).Latent profile analysis was performed using Mplus8.0 software to identify psychosocial adaptation patterns of psoriasis patients,and SPSS25.0 was used to compare social alienation differences among different adaptation groups.Results Psoriasis patients could be divided into two latent profiles:moderate psychosocial adaptation group(31.38％)and low psychosocial adaptation group(68.62％).Medical payment method,dis-ease recurrence,psoriasis subtype,disease duration,family history,skin lesion exposure,and AAQ-2 scores were identified as main influencing factors(P＜0.05).Significant differences in total GAS scores were found between the two groups(P＜0.05).Conclusion The psychosocial adaptation of psoriasis patients shows het-erogeneity and could be classified into two latent profiles.Targeted interventions should be implemented to improve psychosocial adaptation levels.

The traditional detection methods for monitoring the biomass,protein,chlorophyll content and other key indicators in the growth of chlorella have some problems,including complicated operation,slow detection speed and difficult large-scale application.In this study,a fast and efficient monitoring method for the key indicators in the growth of chlorella was established using near infrared spectroscopy and chemometrics.Near-infrared spectroscopy was used to collect near-infrared spectra of chlorella algal fluid at different growth stages,and standard methods were used to detect the biomass,protein and chlorophyll contents of corresponding samples.A quantitative analysis model was established based on partial least squares regression(PLSR).To improve the prediction ability of the model,multiplicative scatter correction(MSC)was used to reduce the interference of scattering on the raw spectrum(RS),standard normal variate(SNV)was used to normalize the original spectral data to eliminate differences between samples,continuous wavelet transform(CWT)was used to obtain the key features of spectral data,the first derivative(1st)was used to enhance the differentiation of the original spectral features,and monte carlo-uninformative variable elimination(MC-UVE)and randomization test(RT)were used to screen the valid variables in the wavelength.By evaluating the prediction ability of different models,the quantitative analysis models of chlorella biomass,protein and chlorophyll content were finally determined.The results showed that the model based on 1st combined with RT spectra had better predictive ability for chlorella nutrient content detection,and the root mean square errors of prediction(RMSEP)and coefficients of determination(R2)were 0.041 and 0.933 for biomass,0.012 and 0.973 for protein,and 0.517 and 0.962 for chlorophyll,respectively.This model showed practical application value,and could realize the rapid and accurate detection of chlorella biomass,protein and chlorophyll content at the same time.

The major components of Olaflur raw material were characterized using ultra performance liquid chromatography-quadrupole time-of-flight-mass spectrometry(UPLC-Q-TOF/MS).The results revealed that cetyl amine fluoride(C16-AmF),octadecene amine fluoride(C18:1-AmF),and octadecyl amine fluoride(Olaflur)were the main components.The contents of C16-AmF,C18:1-AmF,and Olaflur in oral care products were determined via ultra performance liquid chromatography-charged aerosol detector coupled with solid-phase extraction(SPE-UPLC-CAD).The oral care sample was dispersed evenly with a 50%ethanol aqueous solution,and then vortexed with ethanol.The supernatant was collected by centrifugation,concentrated to near dryness,and redissolved with ultrapure water.The re-dissolved sample was loaded onto a Poly-Sery HLB Pro SPE column for purification and elution.The acetonitrile eluate was collected and concentrated to 1.0 mL.Finally,a prepared test solution was separated on a Thermo Acclaim Surfactant Plus chromatographic column(2.1 mm×150 mm,3 μm).Acetonitrile and 100 mmol/L acetic acid-ammonium acetate aqueous solution(pH=4.8)were used as the mobile phases for gradient elution.The flow rate was 0.3 mL/min and cloumn temperature was maintained at 40℃.The sample was detected using a charged aerosol detector,and quantified using an external standard method.The experimental results indicated that the three organic fluorinated amines showed good linear relationship in their respective concentration ranges.The correlation coefficients(r)were greater than 0.99.The limit of detection(LOD)and the limit of quantification(LOQ)of C16-AmF were 2.0 and 8.0 μg/mL,respectively.The LOD and LOQ of C18:1-AmF were 2.0 and 8.0 μg/mL,respectively.The LOD and LOQ of Olaflur were 3.0 μg/mL and 10.0 μg/mL,respectively.The spiked recoveries of the three organic fluorinated amines were 84.3%-104.2%,with relative standard deviations(RSDs)of 4.93%-5.82%.The 28 batches of commercial oral care samples were detected by this method and the results indicated that three organic fluorinated amines were detected in 18 samples and the total content were 22.2-11477.8 μg/g.This method had high sensitivity and good reproducibility.It was suitable for verifying the authenticity of the claims of oral care products promoted with Olaflur as the main efficacy ingredient and selling point,and provided a valuable reference for establishing and improving the standard analytical method for Olaflur.

The MADS-box gene family is a very important transcriptional regulator gene, which plays a role in the whole growth and development process of plants. The APETALA1 (AP1) gene is considered to play an important regulatory role in the transformation of plant flowering, but also to control the characteristic development of floral organs. Lonicera macranthoides is used as medicine with dry buds and early flowers. Therefore, studying the potential mechanism of AP1 gene in regulating flower organ development can provide a basis for improving its medicinal value by molecular means. To explore the potential mechanism of the AP1 gene in the regulation of floral organ development in L. macranthoides, the full-length cDNA of the AP1 was cloned by reverse transcription PCR (RT-PCR) and named LmMADS4. The results show that the CDS of the LmMADS4 gene is 729 bp and encodes 242 amino acids, and the LmMADS4 protein contains no signal peptide and no transmembrane structure, which is an unstable hydrophilic protein. Through homologous sequence alignment and phylogenetic analysis, LmMADS4 and L. japonica MADS27 protein cluster into one class and are closely related. Finally, the expression pattern and protein interaction pattern of LmMADS4 were analyzed by real-time reverse transcription-PCR (qRT-PCR) and yeast two-hybrid technology. The qRT-PCR showed that LmMADS4 gene was differentially expressed in the stems, leaves and flower bud at different developmental stages, including bud type variety Longhua and common variety Baiyun; and LmMADS4 gene was highly expressed in the flower buds, and with the development of flower buds, LmMADS4 gene was continuously up-regulated in the flower bud variety Longhua, however, the expression level of LmMADS4 in the Baiyun terminal flower bud was lower than that in the late flower bud, but the difference was not significant. The yeast two-hybrid results showed that the bait vector pGBKT7-LmMADS4 was not toxic to yeast strains and had no self-activating activity. LmMADS4 protein interacted with LmSVP1, LmSVP3 and LmSOC1s proteins. This study can provide a theoretical basis for exploring the mechanism of long flower bud stage and corolla non-unfolding at the molecular level and variety improvement of L. macranthoides.

Objective To investigate the role of lipopolysaccharide(LPS)in regulating the inflammatory response of neutrophil through the leucine-rich α-2 glycoprotein 1(LRG1)/Rho-associated protein kinase(ROCK1)signaling.Methods HL-60 cells were treated with 1 μmol/L all-trans retinoic acid(ATRA)and 12.5 μL/mL dimethyl sulfoxide(DMSO)for 72 h and 96 h,and the morphological changes were observed by Wright-Giemsa staining.The expression of CD11b was detected by flow cytometry.LPS induced the activation of dHL-60 and human peripheral blood neutrophils.The transcription and secretion levels of LRG1,ROCK1 and inflammatory cytokines were detected by qPCR and ELISA,respectively.The expression levels of LRG1 and ROCK1 after the activation of dHL-60 were detected by Western blotting.Furthermore,dHL-60 was treated with the recombinant protein LRG1 and ROCK1 inhibitor Y-27632;the transcription levels of inflammatory cytokines were detected by qPCR.Results Neutrophils were activated by LPS.The expression levels of LRG1 and ROCK1 were significantly increased,and the transcription levels of inflammatory cytokines were significantly increased.The recombinant protein LRG1 activated dHL-60 in vitro,and the transcription levels of ROCK1 and inflammatory cytokines were significantly increased.Using the ROCK1 inhibitor Y-27632,the production levels of inflammatory cytokines were significantly reduced.Conclusion LPS can regulate the production levels of neutrophil inflammatory cytokines through activating the LRG1/ROCK1 signaling,thus exacerbating the inflammatory response.

ObjectiveTo investigate the application of endoscopy in obtaining the great saphenous vein （GSV） during coronary artery bypass grafting （CABG） and explore the learning curve， with a particular focus on common challenges encountered during the learning process and their impact on early clinical outcomes. MethodsA retrospective analysis was conducted on clinical data from 83 patients who underwent off-pump CABG with endoscopic GSV harvesting at the First Affiliated Hospital of Zhengzhou University from July 2013 to April 2014. Patients were categorized into four groups based on the chronological order of their hospitalization： Group A （novice group， n=20）， Group B （proficient group， n=20）， Group C （progressive group， n=20）， and Group D （mature group， n=23）. Differences in perioperative and midterm follow-up outcomes among the groups were analyzed to determine the learning curve period. ResultsThe study population had a mean age of （60.22±8.06） years and a mean body weight of （69.77±11.66） kg. Comorbidities included hypertension （24 cases）， diabetes （26 cases）， and subacute cerebral infarction （14 cases）. The novice group exhibited significantly shorter GSV length-to-harvest time ratio relative to the other three groups （P<0.001） and a significantly higher incidence of main vein damage （P=0.006）. However， there was no statistically significant difference in graft patency at the 1-year follow-up. ConclusionThorough and reliable technical training in endoscopic GSV harvesting is essential to minimize vascular injury caused by novice operators. Approximately 20 cases of hands-on experience and a careful self-analysis of procedural challenges are likely required to achieve proficiency in GSV harvesting.

Projection micro stereolithography three-dimensional(3D)printing method was proposed in this study to fabricate complex microchannels of combined cross-sections.By using 3D printing and polydimethylsiloxane(PDMS)replication methods,two inertial microfluidic chips of three-step and five-step cross-sections were fabricated,and the dimension precisions of the microchannels were controlled within 20 μm.Using the microfluidic chips,the movements of two fluorescent polystyrene particles with diameters of 10 and 6 μm in the stepped channels were investigated.In addition,numerical simulations were applied to demonstrate the inertial focusing mechanisms of particles in the channels.It was found that 10-μm particles had three equilibrium positions in the three-step channel,which located at the inner walls of the three steps,respectively,and most particles focused at the inner step.The 6-μm particles also had three equilibrium positions in the three-step channel.However,the particles migrated to the middle and the outer steps under high flow rates.In the five-step channel,when the flow rate was increased gradually,10-μm particles had a single and two equilibrium positions,respectively,and the particles migrated towards the inner channel wall under high flow rates.In comparison to 10-μm particles,6-μm particles had two stable equilibrium positions in the five-step channel at all flow rate range.It could be concluded that the quantity,shape and strength of the secondary flow vortex could be altered by changing structure of the combined cross-section,thus the equilibrium positions and quantities of the focusing particles could be also regulated.The research outcome might provide new insights for precise cell inertial manipulation and promote the application and development of inertial microfluidic technology in biomedical and other fields.