Diterpenoid ferruginol is a key intermediate in biosynthesis of active ingredients such as tanshinone and carnosic acid.However, the traditional process of obtaining ferruginol from plants is often cumbersome and inefficient. In recent years, the increasingly developing gene editing technology has been gradually applied to the heterologous production of natural products, but the production of ferruginol in microbe is still very low, which has become an obstacle to the efficient biosynthesis of downstream chemicals, such as tanshinone. In this study, miltiradiene was produced by integrating the shortened diterpene synthase fusion protein,and the key genes in the MVA pathway were overexpressed to improve the yield of miltiradiene. Under the shake flask fermentation condition, the yield of miltiradiene reached about(113. 12±17. 4)mg·L~(-1). Subsequently, this study integrated the ferruginol synthase Sm CYP76AH1 and Sm CPR1 to reconstruct the ferruginol pathway and thereby realized the heterologous synthesis of ferruginol in Saccharomyces cerevisiae. The study selected the best ferruginol synthase(Il CYP76AH46) from different plants and optimized the expression of pathway genes through redox partner engineering to increase the yield of ferruginol. By increasing the copy number of diterpene synthase, CYP450, and CPR, the yield of ferruginol reached(370. 39± 21. 65) mg·L~(-1) in the shake flask, which was increased by 21. 57-fold compared with that when the initial ferruginol strain JMLT05 was used. Finally, 1 083. 51 mg·L~(-1) ferruginol was obtained by fed-batch fermentation, which is the highest yield of ferruginol from biosynthesis so far. This study provides not only research ideas for other metabolic engineering but also a platform for the construction of cell factories for downstream products.
Saccharomyces cerevisiae/genetics* ; Diterpenes/metabolism* ; Metabolic Engineering ; Fermentation ; Abietanes

The chemical constituents were systematically separated from the roots of Berberis polyantha by various chromatographic methods, including silica gel column chromatography, HP20 column chromatography, polyamide column chromatography, reversed-phase C_(18) column chromatography, and preparative high-performance liquid chromatography. The structures of the compounds were identified by physicochemical properties and spectroscopic techniques(1D NMR, 2D NMR, UV, MS, and CD). Four phenylpropanoids were isolated from the methanol extract of the roots of B. polyantha, and they were identified as(2R)-1-(4-hydroxy-3,5-dimethoxyphenyl)-1-propanone-O-β-D-glucopyranoside(1), methyl 4-hydroxy-3,5-dimethoxybenzoate(2),(+)-syringaresinol(3), and syringaresinol-4-O-β-D-glucopyranoside(4). Compound 1 was a new compound, and other compounds were isolated from this plant for the first time. The anti-inflammatory activity of these compounds was evaluated based on the release of nitric oxide(NO) in the culture of lipopolysaccharide(LPS)-induced RAW264.7 macrophages. At a concentration of 10 μmol·L~(-1), all the four compounds inhibited the LPS-induced release of NO in RAW264.7 cells, demonstrating potential anti-inflammatory properties.
Plant Roots/chemistry* ; Animals ; Mice ; Berberis/chemistry* ; RAW 264.7 Cells ; Macrophages/immunology* ; Drugs, Chinese Herbal/isolation & purification* ; Nitric Oxide/metabolism* ; Molecular Structure ; Anti-Inflammatory Agents/isolation & purification*

BACKGROUND: Mild cognitive impairment (MCI) is common in atrial fibrillation (AF) patients and may develop earlier in those with multiple cardiovascular comorbidities, potentially impairing self-management and treatment adherence. This study aimed to characterize the prevalence and profile of MCI in AF patients, examine its associations with cardiovascular comorbidities, and assess how these comorbidities influence specific cognitive domains. METHODS: This cross-sectional study analyzed data from AF patients who underwent cognitive assessment between 2017 and 2021. Cognitive status was categorized as MCI or non-MCI based on the Montreal Cognitive Assessment. Associations between comorbidities and MCI were assessed by logistic regression, and cognitive domains were compared using the Mann-Whitney U test. RESULTS: Of 4136 AF patients (mean age: 64.7 ± 9.4 years, 64.7% male), 33.5% of patients had MCI. Among the AF patients, 31.2% of patients had coronary artery disease, 20.1% of patients had heart failure, and 18.1% of patients had hypertension. 88.7% of patients had left atrial enlargement, and 11.0% of patients had reduced left ventricular ejection fraction. Independent factors associated with higher MCI prevalence included older age (OR = 1.04, 95% CI: 1.03-1.05, P < 0.001), lower education level (OR = 1.51, 95% CI: 1.31-1.73, P < 0.001), hypertension (OR = 1.28, 95% CI: 1.07-1.52, P = 0.001), heart failure (OR = 1.24, 95% CI: 1.04-1.48, P = 0.020), and lower left ventricular ejection fraction (OR = 1.43, 95% CI: 1.04-1.98, P = 0.028). A higher CHA₂DS₂-VASc score (OR = 1.27, 95% CI: 1.22-1.33, P < 0.001; ≥ 2 points vs. < 2 points), and greater atherosclerotic cardiovascular disease burden (OR = 1.45, 95% CI: 1.02-2.08, P = 0.040; 2 types vs. 0 type) were linked to increased MCI risk. These above factors influenced various cognitive domains. CONCLUSIONS MCI is common in AF and closely associated with cardiovascular multimorbidity. Patients with multiple comorbidities are at higher risk, highlighting the importance of routine cognitive assessment to support self-management and integrated care.

Early-life stress (ES) leads to cognitive dysfunction in female adolescents, but the underlying neural mechanisms remain elusive. Recent evidence suggests that the cell adhesion molecules NECTIN1 and NECTIN3 play a role in cognition and ES-related cognitive deficits in male rodents. In this study, we aimed to investigate whether and how nectins contribute to ES-induced cognitive dysfunction in female adolescents. Applying the well-established limited bedding and nesting material paradigm, we found that ES impairs recognition memory, suppresses prefrontal NECTIN1 and hippocampal NECTIN3 expression, and upregulates corticotropin-releasing hormone (Crh) and its receptor 1 (Crhr1) mRNA levels in the hippocampus of adolescent female mice. Genetic experiments revealed that the reduction of dorsal CA1 (dCA1) NECTIN3 mediates ES-induced object recognition memory deficits, as knocking down dCA1 NECTIN3 impaired animals' performance in the novel object recognition task, while overexpression of dCA1 NECTIN3 successfully reversed the ES-induced deficits. Notably, prefrontal NECTIN1 knockdown did not result in significant cognitive impairments. Furthermore, acute systemic administration of antalarmin, a CRHR1 antagonist, upregulated hippocampal NECTIN3 levels and rescued object and spatial memory deficits in stressed mice. Our findings underscore the critical role of dCA1 NECTIN3 in mediating ES-induced object recognition memory deficits in adolescent female mice, highlighting it as a potential therapeutic target for stress-related psychiatric disorders in women.
Animals ; Female ; Mice ; CA1 Region, Hippocampal/metabolism* ; Cell Adhesion Molecules/metabolism* ; CRF Receptor, Type 1/metabolism* ; Memory Disorders/etiology* ; Mice, Inbred C57BL ; Nectins/genetics* ; Receptors, Corticotropin-Releasing Hormone/antagonists & inhibitors* ; Recognition, Psychology/physiology* ; Stress, Psychological/complications*

Background Mitochondrial biogenesis is pivotal in coal workers' pneumoconiosis fibrosis, yet the role of the peroxisome proliferator-activated receptor gamma coactivator 1-alpha (PGC-1α)-nuclear respiratory factor 1 (NRF1)-mitochondrial transcription factor A (TFAM) pathway inmitochondrial biogenesis remains elusive, warranting further investigation. Objective To elucidate the role of the PGC-1α-NRF1-TFAM pathway in mitochondrial biogenesis in a rat coal workers' pneumoconiosis model through in vivo and in vitro experiments. Methods (1)n vivo: twelve SPF male SD rats (200-220 g) were randomized into a control group and a coal dust group (n=6 per group). After acclimatization, the coal dust group received 1 mL 50 mg·mL⁻¹ coal dust suspension via intratracheal instillation; the controls received saline. Lung tissues were harvested after two months for histopathology [HE, Masson, and transmission electron microscopy (TEM) ], protein and mRNA analysis, and mitochondrial DNA (mtDNA) quantification by quantitative real-time polymerase chain reaction (qPCR). (2) In vitro: rat lung type II epithelial cells (RLE-6TN) cells were exposed to coal dust (50, 100, 200, and 400 mg·L⁻¹, 24 h). CCK-8 assay determined optimal doses. Ultrastructural changes were analyzed by TEM. Cells were transfected with OE-PGC-1α (PGC-1α overexpression) or shRNA-PGC-1α plasmids (PGC-1α knockdown), and the transfection efficiency was determined by reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR). The expression levels of alpah-smooth muscle actin (α-SMA), citrate synthase (CS), PGC-1α, NRF1, TFAM, and fibronectin (Fn) proteins and their corresponding mRNA were detected using Western blot and RT-qPCR, respectively. The relative content of mtDNA was determined by qPCR. Results In vivo: the control group lung samples exhibited soft, pink parenchyma, while the coal dust-exposed lungs showed blackened surfaces with soft texture. The histopathological evaluation revealed intact alveolar walls in the controls versus structural destruction, micro-nodules, and fibrotic areas in the coal dust group. After Masson staining, coal dust deposits were found surrounded by blue collagen fibers in the exposed lungs, but absent in the controls. The coal dust group displayed significant upregulation of fibrotic marker α-SMA and downregulation of mitochondrial biogenesis markers (CS, PGC-1α, NRF1, TFAM) and mtDNA compared to the controls (P<0.05). In vitro: coal dust exposure reduced cell density and induced morphological alterations. TEM revealed evenly distributed normal mitochondria in controls versus mitochondrial swelling, disrupted cristae, and reduced numbers in exposed cells. The mitochondrial biogenesis markers were elevated in the coal dust + OE-PGC-1α group compared to the coal dust + OE-NC group (P<0.05); in contrast, they were decreased in the coal dust + shRNA-PGC-1α group compared to the coal dust + shRNA-NC group (P<0.05). Compared to the control group, the expression levels of the fibrosis marker α-SMA mRNA and protein were increased in the coal dust group (P<0.05). Overexpression of PGC-1α reduced α-SMA expression, while downregulation of PGC-1α increased its expression (P<0.05). Conclusion Coal dust exposure induces mitochondrial dysfunction and pulmonary fibrosis in vivo and in vitro via the PGC-1α-NRF1-TFAM pathway dysregulation. Targeting this pathway may mitigate coal dust-induced fibrosis by restoring mitochondrial biogenesis.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective To investigate the effect of microplastic(MPs)exposure on learning and memory in mice,and its mechanism by observing the protein expression of brain-derived neurotrophic factor(BDNF)/tyrosine receptor kinase B(TrkB)/N-methyl-D-aspartate receptor subtype 2B(NR2B)signaling pathway and neurogenesis.Methods Forty male C57BL/6 mice were randomly divided into control group(Ctrl)and microplastics exposure group(MPs).Mice in MPs group were treated with 0.3 mg/(kg·d)microplastics,administered by gavage at a volume of 200 μl for 30 consecutive days.Morris water maze test was used to evaluate the spatial learning and memory ability of mice.Western blotting was used to detect the protein levels of BDNF,TrkB and NR2B in hippocampus of mice.Immunofluorescent staining was used to observe the number of doublecortin(DCX)and neuronal nuclei antigen(NeuN)positive cells in the hippocampus of mice to evaluate hippocampal neurogenesis.Results Compared with the control group,the ability of learning and memory decreased significantly in MPs group mice(P＜0.01).The expression levels of BDNF,TrkB and NR2B in the hippocampus of MPs group mice were significantly lower than those of control group(P＜0.05).The number of DCX and NeuN positive cells in the hippocampus of MPs group was significantly lower than that of control group(P＜0.01).Conclusion MPs exposure induces learning and memory impairment which may be related to inhibiting BDNF/TrkB/NR2B signaling pathway and reducing hippocampal neurogenesis.