This article systematically reviews the current research status as well as diagnosis and treatment strategies of traditional Chinese medicine （TCM） for gastroesophageal reflux disease （GERD）. Studies demonstrate that TCM， based on the "disease-syndrome combination" approach， exhibits multi-target advantages in alleviating symptoms of various GERD subtypes， promoting mucosal repair， regulating emotions， and facilitating the reduction of western medication. To address clinical challenges such as symptom overlap and limited therapeutic efficacy， strategies have been proposed including "treating different diseases with the same method" and integrated regulation based on viscera correlation. Future efforts should focus on elucidating the mechanisms of compound prescriptions， promoting TCM drug development under the "three-combination" evaluation framework that integrates TCM theory， human experience and clinical trial evidence， and optimizing integrated traditional and western medicine models to enhance GERD management.

The present study delves into the cellular mechanisms underlying the antiviral effects of dehydrodiisoeugenol(DEH) by focusing on the transcription factor EB(TFEB)/autophagy-lysosome pathway. The cell counting kit-8(CCK-8) was utilized to assess the impact of DEH on the viability of human non-small cell lung cancer cells(A549). The inhibitory effect of DEH on the replication of influenza A virus(H1N1) was determined by real-time quantitative polymerase chain reaction(RT-qPCR). Western blot was employed to evaluate the influence of DEH on the expression level of the H1N1 virus nucleoprotein(NP). The effect of DEH on the fluorescence intensity of NP was examined by the immunofluorescence assay. A mouse model of H1N1 virus infection was established via nasal inhalation to evaluate the therapeutic efficacy of 30 mg·kg~(-1) DEH on H1N1 virus infection. RNA sequencing(RNA-seq) was performed for the transcriptional profiling of mouse embryonic fibroblasts(MEFs) in response to DEH. The fluorescent protein-tagged microtubule-associated protein 1 light chain 3(LC3) was used to assess the autophagy induced by DEH. Western blot was employed to determine the effect of DEH on the autophagy flux of LC3Ⅱ/LC3Ⅰ under viral infection conditions. Lastly, the role of TFEB expression in the inhibition of DEH against H1N1 infection was evaluated in immortalized bone marrow-derived macrophage(iBMDM), both wild-type and TFEB knockout. The results revealed that the half-maximal inhibitory concentration(IC_(50)) of DEH for A549 cells was(87.17±0.247)μmol·L~(-1), and DEH inhibited H1N1 virus replication in a dose-dependent manner in vitro. Compared with the H1N1 virus-infected mouse model, the treatment with DEH significantly improved the body weights and survival time of mice. DEH induced LC3 aggregation, and the absence of TFEB expression in iBMDM markedly limited the ability of DEH to counteract H1N1 virus replication. In conclusion, DEH exerts its inhibitory activity against H1N1 infection by activating the TFEB/autophagy-lysosome pathway.
Influenza A Virus, H1N1 Subtype/genetics* ; Animals ; Autophagy/drug effects* ; Humans ; Mice ; Basic Helix-Loop-Helix Leucine Zipper Transcription Factors/genetics* ; Influenza, Human/metabolism* ; Lysosomes/metabolism* ; Orthomyxoviridae Infections/genetics* ; Eugenol/pharmacology* ; Antiviral Agents/pharmacology* ; Virus Replication/drug effects* ; A549 Cells ; Male

Instrument separation is a critical complication during root canal therapy, impacting treatment success and long-term tooth preservation. The etiology of instrument separation is multifactorial, involving the intricate anatomy of the root canal system, instrument-related factors, and instrumentation techniques. Instrument separation can hinder thorough cleaning, shaping, and obturation of the root canal, posing challenges to successful treatment outcomes. Although retrieval of separated instrument is often feasible, it carries risks including perforation, excessive removal of tooth structure and root fractures. Effective management of separated instruments requires a comprehensive understanding of the contributing factors, meticulous preoperative assessment, and precise evaluation of the retrieval difficulty. The application of appropriate retrieval techniques is essential to minimize complications and optimize clinical outcomes. The current manuscript provides a framework for understanding the causes, risk factors, and clinical management principles of instrument separation. By integrating effective strategies, endodontists can enhance decision-making, improve endodontic treatment success and ensure the preservation of natural dentition.
Humans ; Root Canal Therapy/adverse effects* ; Consensus ; Root Canal Preparation/adverse effects*

ObjectiveBola-like short peptides exhibit novel self-assembly properties due to the formation of peptide dimers via hydrogen bonding interactions between their C-terminals. In this configuration, hydrophilic amino acids are distributed at both terminals, making these peptides behave similarly to Bola peptides. The electrostatic repulsive interactions arising from the hydrophilic amino acids at each terminal can be neutralized, thereby greatly promoting the lateral association of β-sheets. Consequently, assemblies with significantly larger widths are typically the dominant nanostructures for Bola-like peptides. To investigate the effect of hydrophilic amino acids on the self-assembly behavior of Bola-like peptides, the peptides Ac-RI₃-CONH₂ and Ac-HI₃-CONH₂ were designed and synthesized using the Bola-like peptide Ac-KI₃-CONH₂ as a template. Their self-assembly behavior was systematically examined. MethodsAtomic force microscopy (AFM) and transmission electron microscopy (TEM) were employed to characterize the morphology and size of the assemblies. The secondary structures of the assemblies were analyzed using circular dichroism (CD) and Fourier transform infrared (FTIR) spectroscopy. Small-angle neutron scattering (SANS) was used to obtain detailed structural information at a short-length scale. Based on these experimental results, the effects of hydrophilic amino acids on the self-assembly behavior of Bola-like short peptides were systematically analyzed, and the underlying formation mechanism was explored. ResultsThe aggregation process primarily involved three steps. First, peptide dimers were formed through hydrogen bonding interactions between their C-terminals. Within these dimers, the hydrophilic amino acids K, R, and H were positioned at both terminals, enabling the peptides to self-assemble in a manner similar to Bola peptides. Next, β-sheets were formed via hydrogen bonding interactions along the peptide backbone. Finally, self-assemblies were generated through the lateral association of β-sheets. The results demonstrated that both Ac-KI₃-CONH₂ and Ac-RI₃-CONH₂ could self-assemble into double-layer nanotubes with diameters of approximately 200 nm. These nanotubes were formed by the edge fusion of helical ribbons, which initially emerged from twisted ribbons. Notably, the primary assemblies of these peptides exhibited opposite chirality: nanofibers formed by Ac-KI₃-CONH₂ displayed left-handed chirality, whereas those formed by Ac-RI₃-CONH₂ exhibited right-handed chirality. This reversal in torsional direction was primarily attributed to the different abilities of K and R to form hydrogen bonds with water. In contrast, Ac-HI₃-CONH₂ formed narrower twisted ribbons with a significantly reduced width of approximately 30 nm, which was attributed to the strong steric hindrance caused by the imidazole rings. The multilayer height of these ribbons was mainly due to the unique structure of the imidazole rings, which can function as both hydrogen bond donors and acceptors, thereby promoting aggregate growth in the vertical direction. ConclusionThe final morphology of the self-assemblies resulted from a delicate balance of various non-covalent interactions. By altering the types of hydrophilic amino acid residues in Bola-like short peptides, the relative strength of non-covalent interactions that drive assembly formation can be effectively regulated, allowing precise control over the morphology and chirality of the assemblies. This study provides a simple and effective approach for constructing diverse self-assemblies and lays a theoretical foundation for the development of functional biomaterials.

Eight butyl-phthalides, senkyunolide K(1), senkyunolide N(2), butylphthalide(3), senkyunolide I(4), senkyunolide H(5),(Z)-butylidenephthalide(6),(Z)-ligustilide(7), and 3-butylidene-7-hydroxyphthalide(8) were isolated from the aerial part of Ligusticum sinense by column chromatography on silica gel column, ODS, Sephadex LH-20 and semi-preparative HPLC. Their structures were elucidated on the basis of spectroscopic and chemical data, especially NMR and MS. Compound 1 was a new butyl-phthalide and compounds 2-8 were isolated from the aerial part of L. sinense for the first time. Furthermore, the inhibitory activities of compounds 1-8 against the nitric oxide(NO) production induced by lipopolysaccharide(LPS) in mouse RAW264.7 macrophages in vitro were evaluated. The results showed that compounds 1-8 exerted inhibitory activities on NO production with IC_(50) of 19.34-42.16 μmol·L~(-1).
Animals ; Mice ; Nitric Oxide/biosynthesis* ; Ligusticum/chemistry* ; Benzofurans/isolation & purification* ; Drugs, Chinese Herbal/isolation & purification* ; Macrophages/immunology* ; RAW 264.7 Cells ; Molecular Structure

This study aimed to investigate the effect of saltwater stir-fried Plantaginis Semen(SPS) on renal fibrosis in rats and decipher the underlying mechanism. Thirty-six Sprague-Dawley rats were randomly assigned into control, model, losartan potassium, and low-, medium-, and high-dose(15, 30, and 60 g·kg~(-1), respectively) SPS groups. Rats in other groups except the control group were subjected to unilateral ureteral obstruction(UUO) to induce renal fibrosis, and the modeling and gavage lasted for 14 days. After 14 consecutive days of treatment, the levels of serum creatinine(Scr) and blood urea nitrogen(BUN) in rats of each group were determined by an automatic biochemical analyzer. Hematoxylin-eosin(HE) and Masson staining were used to evaluate pathological changes in the renal tissue. Western blot and immunofluorescence assay were conducted to determine the protein levels of fibronectin(FN), collagen Ⅰ, vimentin, and α-smooth muscle actin(α-SMA) in the renal tissue. The mRNA levels of epithelial-mesenchymal transition(EMT)-associated transcription factors including twist family bHLH transcription factor 1(TWIST1), snail family transcriptional repressor 1(SNAI1), and zinc finger E-box binding homeobox 1(ZEB1), as well as inflammatory cytokines such as interleukin-1β(IL-1β), interleukin-6(IL-6), and tumor necrosis factor-α(TNF-α), were determined by RT-qPCR. Human renal proximal tubular epithelial(HK2) cells exposed to transforming growth factor-β(TGF-β) for the modeling of renal fibrosis were used to investigate the inhibitory effect of SPS on EMT. Network pharmacology and Western blot were employed to explore the molecular mechanism of SPS in alleviating renal fibrosis. The results showed that SPS significantly reduced Scr and BUN levels and alleviated renal injury and collagen deposition in UUO rats. Moreover, SPS notably down-regulated the protein levels of FN, collagen Ⅰ, vimentin, and α-SMA as well as the mRNA levels of SNAI1, ZEB1, TWIST1, IL-1β, IL-6, and TNF-α in the kidneys of UUO rats and TGF-β-treated HK-2 cells. In addition, compared with Plantaginis Semen without stir-frying with saltwater, SPS showed increased content of specific compounds, which were mainly enriched in the mitogen-activated protein kinase(MAPK) signaling pathway. SPS significantly inhibited the phosphorylation of extracellular signal-regulated kinase(ERK) and p38 MAPK in the kidneys of UUO rats and TGF-β-treated HK2 cells. In conclusion, SPS can alleviate renal fibrosis by attenuating EMT through inhibition of the MAPK signaling pathway.
Animals ; Epithelial-Mesenchymal Transition/drug effects* ; Rats, Sprague-Dawley ; Male ; Rats ; Fibrosis/genetics* ; Drugs, Chinese Herbal/administration & dosage* ; Kidney Diseases/pathology* ; Kidney Tubules/pathology* ; Humans

OBJECTIVE: To evaluate the feasibility and short-term effectiveness of three-dimensional (3D)-printed customized porous acetabular components for reconstruction of extensive acetabular bone defects during primary total hip arthroplasty (THA). METHODS: The clinical data of 8 patients with extensive acetabular bone defects, who were treated with 3D-printed individualized porous acetabular components between July 2018 and January 2022, were retrospectively analyzed. The cohort comprised 4 males and 4 females with an average age of 48 years ranging from 34 to 56 years. Acetabular bone defects were classified as Paprosky type ⅢA in 3 cases and type ⅢB in 5 cases. The causes of acetabular destruction were hip tuberculosis (5 cases), pigmented villonodular synovitis (2 cases), and syphilitic arthritis (1 case). Visual analogue scale (VAS) score and Harris hip score (HHS) were used to evaluate the pain relief and hip function before and after operation. Reconstruction outcomes were further assessed by imaging results [X-ray film and Tomosynthesis Shimadzumetal artefact reduction technology (T-SMART)], and the mechanical properties were evaluated by finite element analysis. RESULTS: The operation time ranged from 174 to 195 minutes (mean, 187 minutes), and intraoperative blood loss ranged from 390 to 530 mL (mean, 465 mL). All 8 patients were follow-up 26-74 months (mean, 44 months). Among the 5 patients with tuberculosis, none experienced postoperative recurrence. At last follow-up, the VAS score was 0.3±0.5 and the HHS score was 87.9±3.7, both significantly improved compared to preoperative values ( t=25.170, P<0.001; t=-28.322, P<0.001). X-ray films at 2 years after operation demonstrated satisfactory matching between the 3D-printed customized acetabular component and the acetabulum. The postoperative center of rotation of the operated hip was shifted by (2.1±0.5) mm horizontally and (2.0±0.7) mm vertically relative to the contralateral side, with both offsets showing significant differences compared to preoperative values ( t=24.700, P<0.001; t=55.230, P<0.001). T-SMART imaging showed satisfactory osseointegration at the implant-host bone interface. No complications such as aseptic loosening or screw breakage was observed during follow-up. Finite element analysis showed that the acetabular component had good mechanical properties. CONCLUSION The application of 3D-printed individualized porous acetabular components in the reconstruction of extensive acetabular bone defects demonstrated precise anatomical reconstruction, stable mechanical support, and good functional performance in short-term follow-up, offering a potential alternative for acetabular defect reconstruction in primary THA.
Humans ; Middle Aged ; Male ; Female ; Printing, Three-Dimensional ; Arthroplasty, Replacement, Hip/instrumentation* ; Acetabulum/diagnostic imaging* ; Adult ; Follow-Up Studies ; Retrospective Studies ; Hip Prosthesis ; Prosthesis Design ; Porosity ; Treatment Outcome ; Plastic Surgery Procedures/methods*

OBJECTIVE: To explore clinical efficacy of different technical combinations in treating ischemic diabetic foot (DF). METHODS: A retrospective analysis was conducted on 35 patients with DF who were treated with vascular interventional opening technique, periosteal distraction technique and bone cement coverage technique from January 2024 to November 2024. They were divided into comprehensive group and periosteal distraction group according to whether the vascular interventional opening technique was used in combination or not. There were 5 patients in comprehensive group, including 4 males and 1 female, aged from 59 to 73 years old with an average of (64.40±5.46) years old;the duration of diabetes ranged from 0.17 to 30.00 years with an average of (14.63±12.02) years;the courses of DF ranged from 30 to 150 days with an average of (84.00±61.48) days;2 patients were grade 2, 2 patients were grade 3, and 1 patient was grade 4 according to Wagner classification;combined vascular interventional opening, periosteal distraction and bone cement coverage surgery for treatment. There were 30 patients in periosteal stretch group, including 22 males and 8 females, aged from 58 to 86 years old with an average of (72.63±7.84) years old;the duration of diabetes was 10.00 (6.75, 16.75) years;the courses of DF was 30.00 (15.00, 37.50) days;14 patients were grade 2, 11 patients were grade 3, and 5 patients were grade 4 according to Wagner classification; combined periosteal distraction and bone cement coverage surgery for treatment. Changes of C-reactive protein (CRP), interleukin-6 (IL-6), and procalcitonin (PCT), toe skin temperature, peripheral capillary oxygen saturation (SpO₂), and visual analogue scale (VAS) for pain were compared between two groups before operation and 1 week after operation. The number of operations, healing period, healing number, toe amputation number, preoperative fever situation and the number of complications were compared between two groups. RESULTS: Both groups were followed up for at least 6 months. There were no statistically significant differences in the number of operations, healing period, toe amputation rate, wound healing rate and complications between two groups (P>0.05). Before operation, the toe skin temperature of comprehensive group (26.98±0.88) ℃ was lower than that of periosteal distraction group (28.17±1.45) ℃, and the difference was statistically significant (P<0.05);while there were no statistically significant difference in CRP, IL-6, PCT, toe SpO2 and VAS between two groups (P>0.05). At 1 week after operation, IL-6, toe skin temperature, toe SpO₂ and VAS in comprehensive group were 12.29(7.92, 22.15) pg·ml-1, (36.02±0.23) ℃, (95.80±0.84) % and(1.40±0.55) respectively, while those in periosteal distraction group were 5.49(4.36, 7.45) pg·ml^-1, (31.36±1.57) ℃, (84.53±6.38) %, (2.20±0.81);and there were statistically significant differences between two groups(P<0.05). CRP, IL-6 and VAS at 1 week after operation in both groups were decreased compared with those before operation, and the differences were statistically significant(P<0.05). The toe skin temperature and SpO₂ were increased compared with those before operation, and the differences were statistically significant(P<0.001). CONCLUSION The multi-technique combination therapy, including vascular interventional opening technique, periostealdistraction technique and bone cement covering technique, could protect each other, enhance efficacy, effectively promote the wound healing of ischemic diabetic foot ulcer, and reduce the toe amputation rate. For moderate to severe ischemic DF, the combined use of periosteal distraction and bone cement coverage techniques has a satisfactory effect. For extremely severe ischemic DF with inflow tract lesions, vascular interventional opening techniques need to be added.
Humans ; Male ; Female ; Middle Aged ; Aged ; Diabetic Foot/surgery* ; Retrospective Studies ; Aged, 80 and over ; Ischemia/surgery* ; Interleukin-6/metabolism*

OBJECTIVE: To evaluate the effects of posterior cruciate ligament(PCL) resection on soft tissue elasticity and knee stability in total knee arthroplasty(TKA). METHODS: Six adult cadaveric knee specimens (involving 10 knees) were included in the study. With the assistance of the robotic system(TiRobot Recon, TINAVI, Beijing), total knee arthroplasty (TKA) was performed sequentially using cruciate retaining (CR) prostheses and posterior stabilizing (PS) prostheses. Between the two surgical procedures, the femoral and tibial osteotomy surfaces were not altered;only the posterior cruciate ligament (PCL) was resected and the intercondylar fossa was treated. After installing the femoral trial component, a soft tissue balance solver was used to apply tension ranging from 30 N to 90 N in 5 N increments at 0°, 10°, and 90° of knee flexion. Meanwhile, the medial and lateral joint gaps were measured synchronously. Based on the tension-gap coupling data, the equivalent elastic coefficients of the medial and lateral soft tissue sleeves at different knee flexion angles, as well as the range of the joint line convergence angle (JLCA) under fixed varus-valgus stress, were calculated. Additionally, the gap balance status under 80 N of tension was analyzed. Self-control comparisons of each indicator were conducted before and after PCL resection to analyze the change patterns. RESULTS: After PCL resection, in the fully extended position (knee flexion 0°). The medial equivalent elastic coefficient was 32.2 (25.7, 63.3) N·mm^-1 for the CR prosthesis and 27.7 (22.0, 51.9) N·mm^-1 for the PS prosthesis, and the statistically significant difference (P=0.013). The range of JLCA was 0.41°(0.26, 0.55)° for the CR prosthesis, which was smaller than 0.75° (0.40, 0.98)° for the PS prosthesis, and the difference was statistically significant(P=0.041). At 90° of knee flexion, the medial joint gap was 10.7(10.1, 11.7) mm for the CR prosthesis, which was smaller than 12.1(10.9, 15.1) mm for the PS prosthesis, with a statistically significant difference(P=0.011). No statistically significant differences were observed in other joint gaps. CONCLUSION PCL resection reduces the rigidity of the medial soft tissues in the fully extended knee and increases the medial joint gap in the flexed position, thereby affecting knee stability and balance. This finding suggests that PS and CR prostheses may require different morphological designs, and there should be differences in indications and osteotomy strategies between CR-TKA and PS-TKA. CR-TKA is more suitable for patients with preoperative medial soft tissue laxity.
Humans ; Posterior Cruciate Ligament/physiopathology* ; Knee Joint/physiopathology* ; Arthroplasty, Replacement, Knee ; Elasticity ; Male ; Female ; Middle Aged ; Aged ; Biomechanical Phenomena ; Adult

Extensive studies have identified potential adverse effects on semen quality of obesity, based on body mass index, but the association between body fat distribution, a more relevant indicator for obesity, and semen quality remains less clear. We conducted a longitudinal study of 4304 sperm donors from the Guangdong Provincial Human Sperm Bank (Guangzhou, China) during 2017-2021. A body composition analyzer was used to measure total and local body fat percentage for each participant. Generalized estimating equations were employed to assess the association between body fat percentage and sperm count, motility, and morphology. We estimated that each 10% increase in total body fat percentage (estimated change [95% confidence interval, 95% CI]) was significantly associated with a 0.18 × 10 6 (0.09 × 10 6 -0.27 × 10 6 ) ml and 12.21 × 10 6 (4.52 × 10 6 -19.91 × 10 6 ) reduction in semen volume and total sperm count, respectively. Categorical analyses and exposure-response curves showed that the association of body fat distribution with semen volume and total sperm count was stronger at higher body fat percentages. In addition, the association still held among normal weight and overweight participants. We observed similar associations for upper limb, trunk, and lower limb body fact distributions. In conclusion, we found that a higher body fat distribution was significantly associated with lower semen quality (especially semen volume) even in men with a normal weight. These findings provide useful clues in exploring body fat as a risk factor for semen quality decline and add to evidence for improving semen quality for those who are expected to conceive.
Humans ; Male ; Adult ; Semen Analysis ; China ; Body Fat Distribution ; Longitudinal Studies ; Sperm Count ; Sperm Motility ; Body Mass Index ; Tissue Donors ; Obesity/complications* ; Spermatozoa ; Young Adult ; Middle Aged ; East Asian People