Objective To explore the correlation between lymph node metastasis and clinicopathological features of lung adenocarcinoma with diameter≤3 cm. Methods The clinicopathologic data of the patients with lung adenocarcinoma≤3 cm in diameter were retrospectively analyzed. The relationship between lymph node metastasis and age, gender, smoking history, pathological subtype, tumor diameter, pleural invasion, vascular invasion and other factors was analyzed. The risk factors of lymph node metastasis were analyzed by univariate and multivariate logistic regression. Results Finally 1 718 patients were collected, including 697 males and 1 021 females with an average age of (58.89±9.85) years. The total lymph node metastasis rate was 12.9%, among whom 452 patients of adenocarcinoma in situ and minimally invasive adenocarcinoma did not have lymph node metastasis, and the lymph node metastasis rate of invasive lung adenocarcinoma was 17.5%. Multivariate analysis showed that tumor diameter, micropapillary subtype, solid subtype, micropapillary component, solid component, vascular invasion and pleural invasion were independent risk factors for lymph node metastasis of invasive lung adenocarcinoma with diameter≤3 cm (P<0.05). While age, lepidic subtype and lepidic component were independent protective factors for lymph node metastasis (P<0.05). Conclusion Clinicopathological features can help predict lymph node metastasis of lung adenocarcinoma with diameter≤3 cm.

ObjectiveTo investigate the imaging features of calcium salt deposition and serological markers in patients with alveolar echinococcosis through a retrospective analysis， as well as independent risk factors for the degree of calcium salt deposition in lesions， and to provide a basis for assessing disease process. MethodsA retrospective analysis was performed for the imaging and clinical data of 107 patients with alveolar echinococcosis who were admitted to The First Affiliated Hospital of Shihezi University from December 2023 to June 2025， and according to the volume of calcium salt deposition， they were divided into non-deposition group with 16 patients， mild deposition group with 52 patients， moderate deposition group with 16 patients， and severe deposition group with 23 patients. A one-way analysis of variance or the Kruskal-Wallis H test was used for comparison of continuous data between groups， and the χ² test or Fisher’s exact test was used for comparison of categorical data between groups. The four groups were further combined into the low deposition group （no/mild deposition） and the high deposition group （moderate/severe deposition）. A binary logistic regression analysis was used to investigate the independent influencing factors for calcium salt deposition， and a predictive model was established. The receiver operating characteristic （ROC） curve was used to assess the predictive performance of the model， and the Bootstrap method was used for internal validation. ResultsThere were significant differences between the four groups in sex distribution， involvement of other sites， white blood cell count， lymphocyte percentage， fibrinogen， uric acid， sodium ion， chloride ion， and calcium ion （all P<0.05）. The univariate analysis showed that there were significant differences between the four groups in sex， involvement of other sites， white blood cell count， lymphocyte percentage， fibrinogen， alanine aminotransferase， albumin， creatinine， uric acid， sodium ion， chloride ion， and calcium ion （all P<0.1）. The multi-collinearity diagnosis showed that the VIF values for all continuous variables ranged from 1.104 to 1.760， suggesting that collinearity did not affect modeling. An ordinal logistic regression model was established based on sex， involvement of other sites， calcium ion， lymphocyte percentage， and uric acid. The multivariate analysis showed that lymphocyte percentage （odds ratio ［OR］=1.106， 95% confidence interval ［CI］： 1.041 — 1.174， P=0.001） and blood calcium level （OR=0.005， 95%CI： 0.000 —0.230， P=0.007） were independent influencing factors for the degree of calcium salt deposition. The regression equation was established as Logit（P）=8.231 + 0.100 × lymphocyte percentage -5.344 × calcium ion. The ROC curve analysis showed that the model had an area under the ROC curve of 0.716， with a Youden index of 0.353， a sensitivity of 1.000， and a specificity of 0.353. The Hosmer-Lemeshow test showed that the model had poor calibration （χ²=20.688， P=0.008）. The Bootstrap method with 1000 repeated samples showed that the estimated values of lymphocyte percentage （OR=1.106， 95%CI： 1.049 — 1.186， P=0.002） and calcium ion （OR=0.005， 95%CI： 0.000 — 0.214， P=0.010） were consistent with the original model， and the confidence intervals did not include 1， which further supported the reliability of the model. ConclusionBoth lymphocyte percentage and blood calcium level are independent influencing factors for calcium salt deposition in alveolar echinococcosis， and the degree of calcium salt deposition in alveolar echinococcosis lesions increases with the reduction in blood calcium level and the increase in lymphocyte percentage.

BACKGROUND:3D-printed bone tissue engineering scaffolds have obvious advantages in the research and clinical treatment of bone defect repair.As one of the important raw materials for 3D printed bone scaffolds,poly-L-lactic acid has a great potential for application in performing bone defect repair,but clinical patients with different bone defect causative factors have different requirements for the comprehensive performance of poly-L-lactic acid bone scaffolds.OBJECTIVE:To summarize and review the development of 3D printing technology and poly-L-lactic acid scaffolds and the design strategies chosen for scaffolds for bone repair in the setting of bone diseases such as osteomyelitis,bone tumor,osteonecrosis,and osteoporosis.METHODS:Literature from CNKI,WanFang,PubMed,Science Direct,and Web of Science databases were searched and screened from 1994 to 2024.Search terms were"3D printing,polylactic acid,bone tissue engineering scaffold,osteomyelitis,bone tumor,osteonecrosis,osteoporosis,bone defect"in Chinese and English.The screened 62 articles were systematically summarized and analyzed.RESULTS AND CONCLUSION:(1)Poly-L-lactic acid is considered to be an ideal raw material for artificial bone scaffold design due to its non-toxicity,processability,biocompatibility,and ability to self-degrade in the human environment.The application of 3D printing technology has enabled poly-L-lactic acid bone scaffolds to meet the multilayered and porous structural design requirements of biomimetic artificial bone repair materials,and to optimize the mechanical properties for better bone repair.(2)According to different bone disease microenvironments,timely adjustment of the functional design of poly-L-lactic acid scaffolds is important for the comprehensive osteogenic efficacy of the scaffolds.The article discusses the application of poly-L-lactic acid scaffolds in bone disease environments such as osteomyelitis,bone tumor,osteonecrosis,and osteoporosis,and highlights the importance of rationally grasping the timing of bone disease treatment and bone tissue regeneration for bone defects caused by different bone diseases.(3)Although poly-L-lactic acid scaffolds show potential in bone repair,there are still some problems,such as the need to further optimize the structural design of the scaffolds to fit new bone regeneration,enhance the bioactivity of the scaffolds,and take into account other functions(e.g.,antimicrobial,anti-tumor,and anti-osteoporosis)in order to adapt to the needs of bone tissue repair in different pathological environments.

BACKGROUND:3D-printed bone tissue engineering scaffolds have obvious advantages in the research and clinical treatment of bone defect repair.As one of the important raw materials for 3D printed bone scaffolds,poly-L-lactic acid has a great potential for application in performing bone defect repair,but clinical patients with different bone defect causative factors have different requirements for the comprehensive performance of poly-L-lactic acid bone scaffolds.OBJECTIVE:To summarize and review the development of 3D printing technology and poly-L-lactic acid scaffolds and the design strategies chosen for scaffolds for bone repair in the setting of bone diseases such as osteomyelitis,bone tumor,osteonecrosis,and osteoporosis.METHODS:Literature from CNKI,WanFang,PubMed,Science Direct,and Web of Science databases were searched and screened from 1994 to 2024.Search terms were"3D printing,polylactic acid,bone tissue engineering scaffold,osteomyelitis,bone tumor,osteonecrosis,osteoporosis,bone defect"in Chinese and English.The screened 62 articles were systematically summarized and analyzed.RESULTS AND CONCLUSION:(1)Poly-L-lactic acid is considered to be an ideal raw material for artificial bone scaffold design due to its non-toxicity,processability,biocompatibility,and ability to self-degrade in the human environment.The application of 3D printing technology has enabled poly-L-lactic acid bone scaffolds to meet the multilayered and porous structural design requirements of biomimetic artificial bone repair materials,and to optimize the mechanical properties for better bone repair.(2)According to different bone disease microenvironments,timely adjustment of the functional design of poly-L-lactic acid scaffolds is important for the comprehensive osteogenic efficacy of the scaffolds.The article discusses the application of poly-L-lactic acid scaffolds in bone disease environments such as osteomyelitis,bone tumor,osteonecrosis,and osteoporosis,and highlights the importance of rationally grasping the timing of bone disease treatment and bone tissue regeneration for bone defects caused by different bone diseases.(3)Although poly-L-lactic acid scaffolds show potential in bone repair,there are still some problems,such as the need to further optimize the structural design of the scaffolds to fit new bone regeneration,enhance the bioactivity of the scaffolds,and take into account other functions(e.g.,antimicrobial,anti-tumor,and anti-osteoporosis)in order to adapt to the needs of bone tissue repair in different pathological environments.

OBJECTIVE To evaluate the cost-effectiveness of lecanemab for early Alzheimer disease （AD） from a whole-society perspective. METHODS Based on data from the Clarity AD study， a global multicenter， randomized， double-blind， placebo-controlled study of lecanemab for early AD， a Markov model was developed according to the disease progression of AD， with a monthly cycle and a time horizon extending to 99% patient mortality. Quality-adjusted life year （QALY） and incremental cost-effectiveness ratio （ICER） were used as outcome indicators， with a willingness-to-pay （WTP） threshold set at twice China’s per capita gross domestic product （GDP） for 2025 （199 330.00 yuan/QALY）. The model simulated the cost-effectiveness of lecanemab plus standard of care （SoC） versus placebo plus SoC for early AD. One-way sensitivity analysis， probabilistic sensitivity analysis， and scenario analysis were employed to test the robustness of the results. RESULTS Compared with placebo plus SoC， the ICER for lecanemab plus SoC was 4 364 711.54 yuan/QALY. One-way sensitivity analysis showed that the hazard ratio for disease progression， the price of lecanemab， body weight， the monthly progression probability of mild cognitive impairment， and the discount rate were key parameters affecting model robustness. Results of the probabilistic sensitivity analysis showed that the probability of lecanemab being cost-effective was 0 at the current WTP threshold. Scenario analysis indicated that a price reduction of at least 94.88% would be required for lecanemab to fall below the WTP threshold. CONCLUSIONS At the current WTP threshold， lecanemab plus SoC is not cost-effective compared with placebo plus SoC for early AD.

OBJECTIVE To evaluate the cost-effectiveness of lecanemab for early Alzheimer disease （AD） from a whole-society perspective. METHODS Based on data from the Clarity AD study， a global multicenter， randomized， double-blind， placebo-controlled study of lecanemab for early AD， a Markov model was developed according to the disease progression of AD， with a monthly cycle and a time horizon extending to 99% patient mortality. Quality-adjusted life year （QALY） and incremental cost-effectiveness ratio （ICER） were used as outcome indicators， with a willingness-to-pay （WTP） threshold set at twice China’s per capita gross domestic product （GDP） for 2025 （199 330.00 yuan/QALY）. The model simulated the cost-effectiveness of lecanemab plus standard of care （SoC） versus placebo plus SoC for early AD. One-way sensitivity analysis， probabilistic sensitivity analysis， and scenario analysis were employed to test the robustness of the results. RESULTS Compared with placebo plus SoC， the ICER for lecanemab plus SoC was 4 364 711.54 yuan/QALY. One-way sensitivity analysis showed that the hazard ratio for disease progression， the price of lecanemab， body weight， the monthly progression probability of mild cognitive impairment， and the discount rate were key parameters affecting model robustness. Results of the probabilistic sensitivity analysis showed that the probability of lecanemab being cost-effective was 0 at the current WTP threshold. Scenario analysis indicated that a price reduction of at least 94.88% would be required for lecanemab to fall below the WTP threshold. CONCLUSIONS At the current WTP threshold， lecanemab plus SoC is not cost-effective compared with placebo plus SoC for early AD.

Objective: To investigate the association of physical activity and screen time with overweight and obesity among children and adolescents with special needs in Tianjin, so as to provide scientific evidence for childhood obesity prevention and intervention measures in the population. Methods: From January 2022 to June 2024, 296 children and adolescents with intellectual disabilities and autism spectrum disorders aged 2-18 years were recruited from special education schools and institutions in Tianjin. Height and weight were measured, and a standardized questionnaire was used to assess physical activity and screen time. Binary Logistic regression analysis was carried out to investigate the association of physical activity and screen time with overweight and obesity. Results: The prevalence of overweight and obesity among children and adolescents with special needs in Tianjin were 17.2% and 21.6%, respectively, and the combined prevalence of overweight and obesity was 38.9%. The median of moderatetovigorous physical activity (MVPA) time was 0.20 h/d, and physical activity sufficiency rate was 7.8%. The median of screen time was 1.79 h/d, and the screen time compliance rate was 68.2%. The binary Logistic regression results showed that lower levels of MVPA time and increased screen time were associated with a higher risk of overweight and obesity among children and adolescents with special needs [OR(95%CI)=1.80(1.06-3.07), 2.40(1.42-4.07),P<0.05]. Conclusions Insufficient physical activity and excessive screen time are associated with an increased risk of overweight and obesity among children and adolescents with special needs. Therefore, comprehensive intervention measures should be implemented as early as possible to prevent and reduce the incidence of overweight and obesity in this population.

Objective: To understand the current situation and related factors of screening myopia among students in special education schools, so as to provide evidence for promoting the health level of this population. Methods: From November 2021 to December 2023, a total of 281 students from 6 special education schools in 5 districts of Tianjin were selected by cluster random sampling method for computer optometry visual acuity examination for non ciliary paralysis and questionnaire survey. Multiple Logistic regression was performed to analyze the influencing factors of screening myopia among special education students. Results: The screening myopia detection rate among these special education students in Tianjin was 27.0%, and the screening myopia detection rates of students with autism, developmental delays, and intellectual disabilities were 22.4%, 12.5%, and 33.0%, respectively. The degree of myopia increased with age ( χ 2 trend =22.65, P <0.01). Multivariate Logistic regression analysis showed that age(10-13 years old: OR =5.40, 14-17 years old: OR =8.40, 18-23 years old: OR =6.02), accommodation(non resident: OR =0.29), daily mobile phone usage ≥2 hours ( OR =2.37), and daily computer/tablet usage ≥2 hours ( OR =2.70) were the risk factors for screening myopia among special education students ( P <0.05). Conclusions The detection rate and degree of screening myopia increase with age in special education students. Prolonged screen time exposure is a primary risk factor for screening myopia in special education students. Effective myopia prevention and control strategies should be designed according to the characteristics of special education students.