Objective:To explore the clinical application value of ultrasound detection of endometrial blood flow perfusion in evaluating the pregnancy outcomes of frozen-thawed embryo transfer (FET) cycles.Methods:A case-control study of 226 patients underwent preimplantation genetic testing (PGT) in the Department of Reproductive Medicine of Chengdu Women's and Children's Central Hospital was conducted. Patients enrolled from December 2021 to August 2024 underwent three-dimensional ultrasound endometrial receptivity testing on the day before FET. According to the pregnancy outcomes, they were divided into clinical pregnancy group ( n=155) and non-pregnancy group ( n=71). The general characteristics and endometrial receptivity parameters were compared between the two groups. Binary logistic regression was used to analyze the factors affecting pregnancy. Results:There was no significant difference in age, proportion of primary infertility, anti-Müllerian hormone, and antral follicle count between the two groups (all P>0.05). The duration of infertility in the clinical pregnancy group [(2.79±2.45) years] was significantly lower than that in the non-pregnancy group [(3.44±1.68) years, P=0.046], the basal luteinizing hormone (LH) level in clinical pregnancy group [(4.37±3.02) U/L] was higher than that in the non-pregnancy group [(3.59±2.02) U/L, P=0.047]. On the day before embryo transfer, the single-plane endometrial blood flow branch in the pregnancy group (4.83±1.57) was more than that in the non-pregnancy group (3.44±1.51), the difference was statistically significant ( P=0.001). The clinical pregnancy group had significantly different endometrial morphology types A [5.2% (8/155)], B [25.8% (40/155)], and C [69.0% (107/155)] compared with the non-pregnancy group [16.9% (12/71), 33.8% (24/71), 49.3% (35/71), P=0.003], respectively, the number of peristalsis waves in the clinical pregnancy group [1(0, 2)] was less than that in the non-pregnancy group [1(0, 4), P=0.046]. There were no significant differences in endometrial thickness, peristaltic wave classification, endometrial volume, endometrial and subendometrial blood flow pulse index/resistance index between the two groups (all P>0.05). Binary logistic regression analysis showed that the endometrial blood flow branch, endometrial peristalsis and basal LH level were independent factors affecting the pregnancy outcome of patients underwent PGT during FET cycle ( OR=1.855, 95% CI: 1.478-2.327, P=0.001; OR=0.813, 95% CI: 0.667-0.990, P=0.040; OR=1.163, 95% CI: 1.000-1.351, P=0.049). Among them, the area under the receiver operating characteristic curve of endometrial blood flow branches for the prediction of PGT-FET pregnancy outcome was 0.725, P=0.001. Conclusion:Endometrial blood flow branch, which represents the intensity of blood perfusion, has a good clinical value in evaluating the pregnancy outcome during FET cycle.

Objective:To explore the clinical application value of ultrasound detection of endometrial blood flow perfusion in evaluating the pregnancy outcomes of frozen-thawed embryo transfer (FET) cycles.Methods:A case-control study of 226 patients underwent preimplantation genetic testing (PGT) in the Department of Reproductive Medicine of Chengdu Women's and Children's Central Hospital was conducted. Patients enrolled from December 2021 to August 2024 underwent three-dimensional ultrasound endometrial receptivity testing on the day before FET. According to the pregnancy outcomes, they were divided into clinical pregnancy group ( n=155) and non-pregnancy group ( n=71). The general characteristics and endometrial receptivity parameters were compared between the two groups. Binary logistic regression was used to analyze the factors affecting pregnancy. Results:There was no significant difference in age, proportion of primary infertility, anti-Müllerian hormone, and antral follicle count between the two groups (all P>0.05). The duration of infertility in the clinical pregnancy group [(2.79±2.45) years] was significantly lower than that in the non-pregnancy group [(3.44±1.68) years, P=0.046], the basal luteinizing hormone (LH) level in clinical pregnancy group [(4.37±3.02) U/L] was higher than that in the non-pregnancy group [(3.59±2.02) U/L, P=0.047]. On the day before embryo transfer, the single-plane endometrial blood flow branch in the pregnancy group (4.83±1.57) was more than that in the non-pregnancy group (3.44±1.51), the difference was statistically significant ( P=0.001). The clinical pregnancy group had significantly different endometrial morphology types A [5.2% (8/155)], B [25.8% (40/155)], and C [69.0% (107/155)] compared with the non-pregnancy group [16.9% (12/71), 33.8% (24/71), 49.3% (35/71), P=0.003], respectively, the number of peristalsis waves in the clinical pregnancy group [1(0, 2)] was less than that in the non-pregnancy group [1(0, 4), P=0.046]. There were no significant differences in endometrial thickness, peristaltic wave classification, endometrial volume, endometrial and subendometrial blood flow pulse index/resistance index between the two groups (all P>0.05). Binary logistic regression analysis showed that the endometrial blood flow branch, endometrial peristalsis and basal LH level were independent factors affecting the pregnancy outcome of patients underwent PGT during FET cycle ( OR=1.855, 95% CI: 1.478-2.327, P=0.001; OR=0.813, 95% CI: 0.667-0.990, P=0.040; OR=1.163, 95% CI: 1.000-1.351, P=0.049). Among them, the area under the receiver operating characteristic curve of endometrial blood flow branches for the prediction of PGT-FET pregnancy outcome was 0.725, P=0.001. Conclusion:Endometrial blood flow branch, which represents the intensity of blood perfusion, has a good clinical value in evaluating the pregnancy outcome during FET cycle.

BACKGROUND: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge. METHODS: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring. The impact of process parameters on fiber size and morphology was investigated. The structure and functions of the scaffolds were evaluated through material characterization and assessments of cellular biocompatibility. RESULTS: The new setup enabled controlled deposition of fibers in different designed orientations. The fabricated small-diameter vascular scaffolds consisted of an inner layer of longitudinally oriented fibers and an outer layer of circumferentially oriented fibers (L + C vascular scaffold). Key parameters, including rotational speed, the utilization of the auxiliary electrode, and top-to-collector distance (TCD) significantly influenced fiber orientation. Additionally, voltage, TCD, feed rate, needle size, auxiliary electrode and collector-auxiliary electrode distance affected fiber diameter and distribution. Mechanical advantages and improved surface wettability of L + C vascular scaffold were confirmed through tensile testing and water contact angle. Cellular experiments indicated that L + C vascular scaffold facilitated cell adhesion and proliferation, with human umbilical vein endothelial cells and smooth muscle cells attaching and elongating along the fiber direction of the inner and outer layer, respectively. CONCLUSION This study demonstrated the feasibility of fabricating fiber-aligned, thick-walled vascular scaffolds using a modified electrospinning setup. The findings provided insights into how the auxiliary electrode, specific collector influenced fiber deposition, potentially advancing biomimetic vascular scaffold engineering.

BACKGROUND: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge. METHODS: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring. The impact of process parameters on fiber size and morphology was investigated. The structure and functions of the scaffolds were evaluated through material characterization and assessments of cellular biocompatibility. RESULTS: The new setup enabled controlled deposition of fibers in different designed orientations. The fabricated small-diameter vascular scaffolds consisted of an inner layer of longitudinally oriented fibers and an outer layer of circumferentially oriented fibers (L + C vascular scaffold). Key parameters, including rotational speed, the utilization of the auxiliary electrode, and top-to-collector distance (TCD) significantly influenced fiber orientation. Additionally, voltage, TCD, feed rate, needle size, auxiliary electrode and collector-auxiliary electrode distance affected fiber diameter and distribution. Mechanical advantages and improved surface wettability of L + C vascular scaffold were confirmed through tensile testing and water contact angle. Cellular experiments indicated that L + C vascular scaffold facilitated cell adhesion and proliferation, with human umbilical vein endothelial cells and smooth muscle cells attaching and elongating along the fiber direction of the inner and outer layer, respectively. CONCLUSION This study demonstrated the feasibility of fabricating fiber-aligned, thick-walled vascular scaffolds using a modified electrospinning setup. The findings provided insights into how the auxiliary electrode, specific collector influenced fiber deposition, potentially advancing biomimetic vascular scaffold engineering.

BACKGROUND: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge. METHODS: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring. The impact of process parameters on fiber size and morphology was investigated. The structure and functions of the scaffolds were evaluated through material characterization and assessments of cellular biocompatibility. RESULTS: The new setup enabled controlled deposition of fibers in different designed orientations. The fabricated small-diameter vascular scaffolds consisted of an inner layer of longitudinally oriented fibers and an outer layer of circumferentially oriented fibers (L + C vascular scaffold). Key parameters, including rotational speed, the utilization of the auxiliary electrode, and top-to-collector distance (TCD) significantly influenced fiber orientation. Additionally, voltage, TCD, feed rate, needle size, auxiliary electrode and collector-auxiliary electrode distance affected fiber diameter and distribution. Mechanical advantages and improved surface wettability of L + C vascular scaffold were confirmed through tensile testing and water contact angle. Cellular experiments indicated that L + C vascular scaffold facilitated cell adhesion and proliferation, with human umbilical vein endothelial cells and smooth muscle cells attaching and elongating along the fiber direction of the inner and outer layer, respectively. CONCLUSION This study demonstrated the feasibility of fabricating fiber-aligned, thick-walled vascular scaffolds using a modified electrospinning setup. The findings provided insights into how the auxiliary electrode, specific collector influenced fiber deposition, potentially advancing biomimetic vascular scaffold engineering.

BACKGROUND: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge. METHODS: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring. The impact of process parameters on fiber size and morphology was investigated. The structure and functions of the scaffolds were evaluated through material characterization and assessments of cellular biocompatibility. RESULTS: The new setup enabled controlled deposition of fibers in different designed orientations. The fabricated small-diameter vascular scaffolds consisted of an inner layer of longitudinally oriented fibers and an outer layer of circumferentially oriented fibers (L + C vascular scaffold). Key parameters, including rotational speed, the utilization of the auxiliary electrode, and top-to-collector distance (TCD) significantly influenced fiber orientation. Additionally, voltage, TCD, feed rate, needle size, auxiliary electrode and collector-auxiliary electrode distance affected fiber diameter and distribution. Mechanical advantages and improved surface wettability of L + C vascular scaffold were confirmed through tensile testing and water contact angle. Cellular experiments indicated that L + C vascular scaffold facilitated cell adhesion and proliferation, with human umbilical vein endothelial cells and smooth muscle cells attaching and elongating along the fiber direction of the inner and outer layer, respectively. CONCLUSION This study demonstrated the feasibility of fabricating fiber-aligned, thick-walled vascular scaffolds using a modified electrospinning setup. The findings provided insights into how the auxiliary electrode, specific collector influenced fiber deposition, potentially advancing biomimetic vascular scaffold engineering.

BACKGROUND: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge. METHODS: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring. The impact of process parameters on fiber size and morphology was investigated. The structure and functions of the scaffolds were evaluated through material characterization and assessments of cellular biocompatibility. RESULTS: The new setup enabled controlled deposition of fibers in different designed orientations. The fabricated small-diameter vascular scaffolds consisted of an inner layer of longitudinally oriented fibers and an outer layer of circumferentially oriented fibers (L + C vascular scaffold). Key parameters, including rotational speed, the utilization of the auxiliary electrode, and top-to-collector distance (TCD) significantly influenced fiber orientation. Additionally, voltage, TCD, feed rate, needle size, auxiliary electrode and collector-auxiliary electrode distance affected fiber diameter and distribution. Mechanical advantages and improved surface wettability of L + C vascular scaffold were confirmed through tensile testing and water contact angle. Cellular experiments indicated that L + C vascular scaffold facilitated cell adhesion and proliferation, with human umbilical vein endothelial cells and smooth muscle cells attaching and elongating along the fiber direction of the inner and outer layer, respectively. CONCLUSION This study demonstrated the feasibility of fabricating fiber-aligned, thick-walled vascular scaffolds using a modified electrospinning setup. The findings provided insights into how the auxiliary electrode, specific collector influenced fiber deposition, potentially advancing biomimetic vascular scaffold engineering.

Objective : To develop and to validate a combined model integrating18F-FDG PET/CT radiomics with clinical features to distinguish between lymphoma and lymphoid inflammatory hyperplasia. Methods : A retrospective study was conducted on a cohort of 232 patients diagnosed with lymphoma or lymphoid inflammatory hyperplasia. Comparative analyses of clinical and traditional imaging indicators were performed to identify inter-group differences. The clinical features were delineated and extracted using medical software including 3D-Slicer and Lifex. Selection of the features was performed to construct a PET/CT-based radiomics Logistic model, with a combined model integrating PET/CT with clinical features then used to evaluate the discriminative efficacy of these models. Results: Analysis of inter-group differences indicated that age, CTmean, and metabolic tumor volume(MTV)were effective for differentiating between lymphoma and lymphoid inflammatory hyperplasia(P<0.05). The PET/CT-based radiomics Logistic model differentiated between lymphoma and lymphoid inflammatory hyperplasia, with an area under curve(AUC) of 0.924(95%CI: 0.884-0.960) and 0.863(95%CI: 0.774-0.939) in the training and testing cohorts, respectively. The integrated Logistic model that combined PET/CT-based radiomics with clinical features to distinguish between lymphoma and lymphoid inflammatory hyperplasia achieved an AUC of 0.933(95%CI: 0.889-0.969) in the training cohort and 0.884(95%CI: 0.792-0.964) in the testing cohort. Decision curve analysis(DCA) demonstrated that the integrated model provided the greatest clinical net benefit. Conclusion The hybrid model integrating18F-FDG PET/CT radiomics with clinical features shows robust diagnostic efficacy to distinguish between lymphoma and lymphoid inflammatory hyperplasia.

Autoimmune hepatitis (AIH) is a severe globally distributed liver disease that could occur at any age. Human menstrual blood-derived stem cells (MenSCs) have shown therapeutic effect in acute lung injury and liver failure. However, their role in the curative effect of AIH remains unclear. Here, a classic AIH mouse model was constructed through intravenous injection with concanavalin A (Con A). MenSCs were intravenously injected while Con A injection in the treatment groups. The results showed that the mortality by Con A injection was significantly decreased by MenSCs treatment and liver function tests and histological analysis were also ameliorated. The results of phosphoproteomic analysis and RNA-seq revealed that MenSCs improved AIH, mainly by apoptosis and c-Jun N-terminal kinase/mitogen-activated protein signaling pathways. Apoptosis analysis demonstrated that the protein expression of cleaved caspase 3 was increased by Con A injection and reduced by MenSCs transplantation, consistent with the TUNEL staining results. An AML12 co-culture system and JNK inhibitor (SP600125) were used to verify the JNK/MAPK and apoptosis signaling pathways. These findings suggested that MenSCs could be a promising strategy for AIH.
Mice ; Animals ; Humans ; Hepatitis, Autoimmune/pathology* ; Signal Transduction ; Disease Models, Animal ; Stem Cells

Objective:Dorsocervical fat pad is common in middle-aged women. Current treatments include surgical excision and liposuction. We evaluated the therapeutic effect of tumescent liposuction on dorsocervical fat pad. Anatomical study was also carried out to explore the anatomical structure and significance of dorsocervical fat pad.Methods:From Jan. 2009 to Dec. 2018, twenty-seven patients with dorsocervical fat pad were treated with tumescent liposuction in Peking University Third Hospital. Small incisions were made in bilateral scapular region and 4 mm suction cannula was applied. A female cadaver fixed with formaldehyde was dissected to investigate the structure of posterior cervical and dorsal region. The specimens were stained with HE and Masson staining.Results:14 patients were followed up for no less than 6 months, with an average follow-up time of 27 months. Patients＇ dorsocervical area were flat and smooth after the surgery. Patient satisfaction rate was 100% and no severe complication was reported except bruise and pain. The symptoms of dorsocervical pain in two patients were significantly improved after operation. Anatomical study showed that the dorsocervical fat pad was composed of superficial and deep layer of adipose tissue, with clear boundary between the two layers and no obvious capsule. The collagen fibers in deep layer were more and denser than those in superficial layer.Conclusions:Tumescent liposuction can effectively treat dorsocervical fat pad. The surgery outcome is ideal with little complication.Through the study of the anatomical structure of the dorsocervical fat pad, the operation method and principle of liposuction can be improved and the operation efficiency can be enhanced.