Three-dimensional printed patient-specific instrumentation (3D-PSI) provides a precise and individualized treatment solution for unicompartmental knee arthroplasty (UKA). Currently, this technology is being applied in clinical practice and has demonstrated certain potential. Compared to conventional instrumentation (CI), 3D-PSI offers a broader range of indications, higher-quality preoperative planning, shorter surgical time, a smoother learning curve, more precise osteotomy and prosthesis placement, and better postoperative functional recovery. However, it still has limitations in the rotational alignment of the tibial component. Additionally, the higher cost for patients and increased hospital equipment investment make it less beneficial for surgeons already proficient in CI techniques. Further reliable evidence is needed to compare 3D-PSI with computer navigation and robotic technologies. This review summarizes the advantages and limitations of 3D-PSI assisted UKA and compares 3D-PSI with different auxiliary technologies.

Objective To compare the differences in lower limb force line between degenerative medial meniscus injuries and lateral meniscus injuries and investigate their correlation.Methods A total of 90 patients who underwent arthroscopic treatment for meniscal injuries between March 2019 and March 2022 were enrolled in the study.They were 45 males and 45 females,at a median age of 52 years(ranging from 40 to 59 years).Of these patients,47 had medial meniscus injuries,while 43 had lateral meniscus injuries.The hip-knee-ankle(HKA)angle was measured on full-length films,and the differences were compared between the 2 groups.Results There were no significant differences in terms of gender,age,lower limb laterality,body mass index,site of injury,and type of injury between the medial meniscus injury group and the lateral meniscus injury group.Statistical difference was observed in the mean HKA angle,with a value of(177.20±2.46)° in the medial meniscus injury group and of(181.05±3.13)° in the lateral meniscus injury group(P＜0.01).Conclusion There is a significant difference in HKA angle between medial meniscus injury group and the lateral meniscus injury group.A correlation is found between lower limb alignment and degenerative meniscus injury.

Objective To evaluate the applicability of a modified U-shaped forearm flap for the repair of small-and medium-sized defects in the oral and maxillary areas to provide a reference for clinicians.Methods This study was re-viewed and approved by the Ethics Committee,and informed consent was obtained from the patients.Ten patients with small-and medium-sized defects in the oral and maxillary areas underwent surgical repair using modified U-shaped fore-arm flaps.There were 8 males and 2 females aged 43-72 years.The donor site was apposed primarily after harvesting the modified U-shaped forearm skin flap.The flaps ranged from 6 cm × 4 cm to 8 cm × 5 cm in size.Six months after the operation,hand movements(finger extension,fist clenching,wrist rotation upward and wrist rotation downward),the forearm donor site,hand sensations and the satisfaction score for the postoperative quality of the scar at the donor site were evaluated(0 to 10;0:very unattractive,10:very satisfactory).Results A total of 10 patients with modified U-shaped forearm flaps survived.One patient developed venous crisis 24 hours after surgery and survived after surgical ex-ploration.Delayed healing occurred at the donor site of the forearm in 1 patient,and the wounds at the donor site of the forearm in the other patients all healed in the first stage.One patient presented with dysesthesia in the hand 2 weeks af-ter surgery and recovered within 3 months.Six months after surgery,all patients had no limited hand movement and no paresthesia at the forearm donor site or hand.The patients were basically satisfied with the appearance of the donor site,and the average satisfaction score of the subjective questionnaire was 8.4 points.Conclusion Modified U-shaped fore-arm flaps can directly close forearm donor site wounds,which avoids surgical trauma to the secondary donor site and sig-nificantly reduces related complications.Modified U-shaped forearm flaps provide an alternative to conventional forearm flaps for the repair of small-and medium-sized defects in the oral and maxillary areas.

Background::Triple-negative breast cancer (TNBC) is a type of highly invasive breast cancer with a poor prognosis. According to new research, long noncoding RNAs (lncRNAs) play a significant role in the progression of cancer. Although the role of lncRNAs in breast cancer has been well reported, few studies have focused on TNBC. This study aimed to explore the biological function and clinical significance of forkhead box C1 promoter upstream transcript (FOXCUT) in triple-negative breast cancer.Methods::Based on a bioinformatic analysis of the cancer genome atlas (TCGA) database, we detected that the lncRNA FOXCUT was overexpressed in TNBC tissues, which was further validated in an external cohort of tissues from the General Surgery Department of the First Affiliated Hospital of Nanjing Medical University. The functions of FOXCUT in proliferation, migration, and invasion were detected in vitro or in vivo. Luciferase assays and RNA immunoprecipitation (RIP) were performed to reveal that FOXCUT acted as a competitive endogenous RNA (ceRNA) for the microRNA miR-24-3p and consequently inhibited the degradation of p38. Results::lncRNA FOXCUT was markedly highly expressed in breast cancer, which was associated with poor prognosis in some cases. Knockdown of FOXCUT significantly inhibited cancer growth and metastasis in vitro or in vivo. Mechanistically, FOXCUT competitively bounded to miR-24-3p to prevent the degradation of p38, which might act as an oncogene in breast cancer. Conclusion::Collectively, this research revealed a novel FOXCUT/miR-24-3p/p38 axis that affected breast cancer progression and suggested that the lncRNA FOXCUT could be a diagnostic marker and therapeutic target for breast cancer.

Objective To investigate the effect of the fusion of leader peptide on the structure of human manganese superoxide dismutase (SOD2) and anti-cisplatin (DDP)-induced renal injury. Methods The effect of mitochondrion targeting sequence (MTS) on the structure and activity of SOD2 was analyzed by structure prediction and superoxide dismutase (SOD) specific-activity determination. The DDP injury model of Kunming (KM) mice was established, and amifostine (AMFT) was set as a positive control. Indicators such as kidney index, renal function, kidney antioxidant capacity, and appearance and pathology changes of mice kidney were used to evaluate the effect of MTS-SOD2 against DDP-induced kidney injury. Results The MTS leader peptide seemed to change the secondary and tertiary structures of SOD2 to some extent, but it also increased the specific activity of the MTS-SOD2 protein. Pre-administration of a medium dose of MTS-SOD2 (0.84 mg/kg) before the use of DDP significantly reduced the level of renal malondialdehyde and increased the SOD activity and total antioxidant capacity (T-AOC) in the kidney, thereby reducing the renal pathological damage and consequently maintaining renal function. The overall protective effect of MTS-SOD2 was comparable to or even better than that of 200 mg/kg AMFT. Conclusion The MTS leader peptide enhances the activity of SOD2 and confers it with an excellent anti-DDP-induced renal-injury effect because of its transmembrane function.

Polymorphism refers to the simultaneous and frequent existence of two or more discontinuous variants or genotypes or alleles in a biological population, also known as genetic polymorphisms or genes Polymorphism. This gene polymorphism may have a certain degree of influence on the pharmacokinetics and pharmacodynamics of the drug. The study of genomics plays an important role in realizing personalized, patient-oriented precision medicine treatment. Population model analysis is to use a modeling method to quantitatively describe the correlation and variability between pharmacokinetic and pharmacodynamic parameters and individual characteristics and to quantify the impact of covariates. At present, this method has been widely used. This paper systematically introduces the application examples of using the population model approach to assess the effects of genetic polymorphisms on the drug PK/PD.

Urea transporters (UT) play a vital role in the mechanism of urine concentration and are recognized as novel targets for the development of salt-sparing diuretics. Thus, UT inhibitors are promising for development as novel diuretics. In the present study, a novel UT inhibitor with a diarylamide scaffold was discovered by high-throughput screening. Optimization of the inhibitor led to the identification of a promising preclinical candidate,

Mongolia is a parliamentary republic country in the north of our country. Healthcare system is mainly composed of three parts: state-owned medical institutions, private clinics and mixed-ownership medical institutions, characteris by the wide coverage but uneven resources. Due to the folk customs and climate, diseases of the digestive system are more common, and the main diseases that cause deaths of Mongolian residents are ischemic heart disease, stroke, and liver cancer. Mongolia is located by and culturally related to China, so the development and dissemination of Traditional Chinese Medicine (TCM) is likely acceptable to the public. Mongolia’s traditional medicine and TCM have long-term exchanges and influences, promoting each other’s development, which also are protected by Mongolian laws. The concerns such as the inheritance, study and protection of Mongolian traditional medicine, the promotion of non-medicinal therapies restrict the development Mongolian and Chinese traditional medicine. It is recommended that Mongolian and TCM jointly promote the development and dissemination of traditional medicine in the world by cultivating high-level medical talents, increasing research and protection of herbal medicines, and expanding the application of non-drug therapies.

Objective:To explore the feasibility of fast and accurate osteotomy using a new angle adjustable osteotomy guide (AAOG) in closing wedge distal femoral osteotomy(CWDFO).Methods:The clinical data of 14 patients (17 knees) with valgus knee treated with CWDFO at Department of Integrated Chinese and Western Medicine Orthopedics, Honghui Hospital, Xi′an Jiaotong University from January 2018 to July 2019 were analyzed retrospectively. There were 3 males and 11 females, aging (41.4±16.4) years (range: 18 to 56 years). The body mass index was (23.5±3.5) kg/m 2 (range: 18.1 to 28.9 kg/m 2). The guide pins were placed with the assistance of the self-designed AAOG. Before the surgery, Solidworks software was used to calculate the correction angle and the osteotomy radius accurately. The osteotomy guide was adjusted according to these two parameters. During the surgery, the adjusted osteotomy guide was placed to the surface of bone closely and the guide pins were drilled into the bone through the guide holes. The position of the guide pins was confirmed under fluoroscopy. The osteotomy was finished under guide of pins and fixed with Tomofix plate (Synthes). The times and duration of placement of the guide pins, the times of X-ray examination, the planned and actual thickness of the osteotomy wedge, the top and bottom area of the osteotomy wedge, the posterior distal femoral angle(PDFA), the correction of the weight line, and the American Knee Society Score(AKSS) and Tegner scores were collected and compared by paired t test or Kruskal-Wallis non-parametric test. Healing time after osteotomy and complications were recorded. Results:The guide pins were successfully placed once in 10 knees, adjusted once in 5 knees and twice in 2 knees. The time spent in placing all the 6 pins was 82.4 seconds (range: 51 to 125 seconds), and the times of X-ray examination was 1.5 times (range: 1 to 5 times). The top and bottom areas of the osteotomy wedge were (5.52±0.52)cm 2 and (5.36±0.49)cm 2. PDFA was (85.2±2.6)° preoperatively and (85.5±1.4)° postoperatively ( t=-0.401, P>0.05). The thickness of the osteotomy was (11.3±1.9)mm according to the preoperative plan, and the actual thickness was (8.1±1.7)mm. All the patients were followed up for 6 months after surgery and AKSS and Tegner scores improved significantly (all P<0.05). The correction of the weight lines was within the ideal range. Fractures of the hinge point occurred in 3 knees. All of the osseous healing without complications. Conclusion:The new osteotomy guide helps to place the guide pins rapidly and precisely according to the preoperative planning, which should be widely used in clinical applications with promising outcomes.

Objective:To explore the feasibility of fast and accurate osteotomy using a new angle adjustable osteotomy guide (AAOG) in closing wedge distal femoral osteotomy(CWDFO).Methods:The clinical data of 14 patients (17 knees) with valgus knee treated with CWDFO at Department of Integrated Chinese and Western Medicine Orthopedics, Honghui Hospital, Xi′an Jiaotong University from January 2018 to July 2019 were analyzed retrospectively. There were 3 males and 11 females, aging (41.4±16.4) years (range: 18 to 56 years). The body mass index was (23.5±3.5) kg/m 2 (range: 18.1 to 28.9 kg/m 2). The guide pins were placed with the assistance of the self-designed AAOG. Before the surgery, Solidworks software was used to calculate the correction angle and the osteotomy radius accurately. The osteotomy guide was adjusted according to these two parameters. During the surgery, the adjusted osteotomy guide was placed to the surface of bone closely and the guide pins were drilled into the bone through the guide holes. The position of the guide pins was confirmed under fluoroscopy. The osteotomy was finished under guide of pins and fixed with Tomofix plate (Synthes). The times and duration of placement of the guide pins, the times of X-ray examination, the planned and actual thickness of the osteotomy wedge, the top and bottom area of the osteotomy wedge, the posterior distal femoral angle(PDFA), the correction of the weight line, and the American Knee Society Score(AKSS) and Tegner scores were collected and compared by paired t test or Kruskal-Wallis non-parametric test. Healing time after osteotomy and complications were recorded. Results:The guide pins were successfully placed once in 10 knees, adjusted once in 5 knees and twice in 2 knees. The time spent in placing all the 6 pins was 82.4 seconds (range: 51 to 125 seconds), and the times of X-ray examination was 1.5 times (range: 1 to 5 times). The top and bottom areas of the osteotomy wedge were (5.52±0.52)cm 2 and (5.36±0.49)cm 2. PDFA was (85.2±2.6)° preoperatively and (85.5±1.4)° postoperatively ( t=-0.401, P>0.05). The thickness of the osteotomy was (11.3±1.9)mm according to the preoperative plan, and the actual thickness was (8.1±1.7)mm. All the patients were followed up for 6 months after surgery and AKSS and Tegner scores improved significantly (all P<0.05). The correction of the weight lines was within the ideal range. Fractures of the hinge point occurred in 3 knees. All of the osseous healing without complications. Conclusion:The new osteotomy guide helps to place the guide pins rapidly and precisely according to the preoperative planning, which should be widely used in clinical applications with promising outcomes.