Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Objective To analyze the characteristics of postoperative hospital-acquired infections and drug sensitivity in lung transplant recipients over the past 5 years in a single center. Methods A total of 724 lung transplant recipients at Wuxi People's Hospital from January 2019 to December 2023 were selected. Based on the principles of hospital-acquired infection diagnosis, a retrospective analysis was conducted on the hospital infection situation and infection sites of lung transplant recipients, and an analysis of the distribution of hospital-acquired infection pathogens and their antimicrobial susceptibility test status was performed. Results Among the 724 lung transplant recipients, 275 cases of hospital-acquired infection occurred, with an infection rate of 38.0%. The case-time infection rate decreased from 54.2% in 2019 to 22.8% in 2023, showing a downward trend year by year (Z=30.98, P<0.001). The main infection site was the lower respiratory tract, accounting for 73.6%. The pathogens were mainly Gram-negative bacteria, with the top four being Acinetobacter baumannii (37.1%), Pseudomonas aeruginosa (17.3%), Klebsiella pneumoniae (13.7%), and Stenotrophomonas maltophilia (13.4%), with imipenem resistance rates of 89%, 53%, 58% and 100%, respectively. Gram-positive bacteria were mainly Staphylococcus aureus (3.6%), with a methicillin resistance rate of 67%. Conclusions Over the past 5 years, the hospital-acquired infections in lung transplant recipients have shown a downward trend, mainly involving lower respiratory tract infections, with the main pathogens being Acinetobacter baumannii, Pseudomonas aeruginosa and Klebsiella pneumoniae, all of which have high resistance rates to imipenem.

BACKGROUND: The level of measurable residual disease (MRD) before and after transplantation is related to inferior transplant outcomes, and post-hematopoietic stem cell transplantation measurable residual disease (post-HSCT MRD) has higher prognostic value in determining risk than pre-hematopoietic stem cell transplantation measurable residual disease (pre-HSCT MRD). However, only a few work has been devoted to the risk factors for positive post-HSCT MRD in patients with acute lymphoblastic leukemia (ALL). This study evaluated the risk factors for post-HSCT MRD positivity in patients with ALL who underwent allogeneic hematopoietic stem cell transplantation (allo-HSCT). METHODS: A total of 1683 ALL patients from Peking University People's Hospital between January 2009 and December 2019 were enrolled to evaluate the cumulative incidence of post-HSCT MRD. Cox proportional hazard regression models were built for time-to-event outcomes. Multivariable analysis was performed to determine independent influencing factors from the univariable analysis. RESULTS: Both in total patients and in T-cell ALL or B-cell ALL, pediatric or adult, human leukocyte antigen-matched sibling donor transplantation or haploidentical SCT subgroups, positive pre-HSCT MRD was a risk factor for post-HSCT MRD positivity ( P  <0.001 for all). Disease status (complete remission 1 [CR1] vs . ≥CR2) was also a risk factor for post-HSCT MRD positivity in all patients and in the B cell-ALL, pediatric, or haploidentical SCT subgroups ( P  = 0.027; P  = 0.003; P  = 0.035; P  = 0.003, respectively). A risk score for post-HSCT MRD positivity was developed using the variables pre-HSCT MRD and disease status. The cumulative incidence of post-HSCT MRD positivity was 12.3%, 25.1%, and 38.8% for subjects with scores of 0, 1, and 2-3, respectively ( P  <0.001). Multivariable analysis confirmed the association of the risk score with the cumulative incidence of post-HSCT MRD positivity and relapse as well as leukemia-free survival and overall survival. CONCLUSION Our results indicated that positive pre-MRD and disease status were two independent risk factors for post-HSCT MRD positivity in patients with ALL who underwent allo-HSCT.
Humans ; Precursor Cell Lymphoblastic Leukemia-Lymphoma/pathology* ; Neoplasm, Residual ; Hematopoietic Stem Cell Transplantation/methods* ; Male ; Female ; Risk Factors ; Adolescent ; Adult ; Child ; Child, Preschool ; Young Adult ; Middle Aged ; Infant ; Transplantation, Homologous ; Proportional Hazards Models ; Retrospective Studies

Objective: To investigate the prevalence of hypertension, diabetes and hyperlipidemia among HIV/AIDS patients aged 50 years and above receiving antiretroviral therapy (ART) in Wuxi City, Jiangsu Province, so as to provide insights into the prevention and intervention of chronic diseases for these populations. Methods: The HIV/AIDS patients aged 50 years and above receiving ART were recruited at designated HIV/AIDS medical institutions in Wuxi City using the convenient sampling method from March to June 2024. Demographic information, treatment status and self-reported prevalence of hypertension, diabetes and hyperlipidemia were collected through questionnaire surveys. Factors affecting the prevalence of chronic diseases were analyzed using a multivariable logistic regression model. Results: A total of 830 HIV/AIDS patients receiving ART were surveyed, including 656 males (79.04%) and 375 patients aged 50 to <60 years (45.18%). Among them, 366 patients reported having at least one type of chronic disease, including hypertension, diabetes and hyperlipidemia, with a self-reported prevalence rate of 44.10%. Specifically, 280, 114 and 61 patients reported having hypertension, diabetes and hyperlipidemia, with the self-reported prevalence rates of 33.73%, 13.73% and 7.35%, respectively. Multivariable logistic regression analysis showed that male patients (OR=1.725, 95%CI: 1.187-2.507), those with monthly income less than 3 000 yuan (OR=1.521, 95%CI: 1.122-2.063), those with body mass index of 24 kg/m2 and above (OR=1.577, 95%CI: 1.168-2.130), those who initiated ART at ages of 50 years and above (50 to <60 years, OR=1.535, 95%CI: 1.052-2.238; ≥60 years, OR=3.322, 95%CI: 2.191-5.038), those with ART duration of 10 years and above (OR=2.069, 95%CI: 1.419-3.017), and those who received non-first-line regimens (OR=1.776, 95%CI: 1.304-2.418) had higher risks of developing at least one type of chronic disease, including hypertension, diabetes and hyperlipidemia. Conclusions The self-reported prevalence of at least one type of chronic disease, including hypertension, diabetes and hyperlipidemia among HIV/AIDS patients aged 50 years and above receiving ART in Wuxi City was 44.10%. Gender, monthly income, body mass index and ART status are the main influencing factors for the risk of chronic diseases.

OBJECTIVE: To quantitatively evaluate the accuracy of data obtained from liquid-interference surfaces using an intraoral 3D scanner (IOS) integrated with a compressed airflow system, so as to provide clinical proof of accuracy for the application of the compressed airflow system-based scanning head in improving data quality on liquid-interference surfaces. METHODS: The study selected a standard model as the scanning object, adhering to the "YY/T 1818-2022 Dental Science Intraoral Digital Impression Scanner" guidelines, a standard that defined parameters for intraoral scanning. To establish a baseline for accuracy, the ATOS Q 12M scanner, known for its high precision, was used to generate true reference values. These true values served as the benchmark for evaluating the IOS performance. Building on the design of an existing scanner, a new scanning head was developed to integrate with a compressed airflow system. This new design aimed to help the IOS capture high-precision data on surfaces where liquid-interference, such as saliva, might otherwise degrade scanning accuracy. The traditional scanning method, without airflow assistance, was employed as a control group for comparison. The study included five groups in total, one control group and four experimental groups, to investigate the effects of scanning lens obstruction, airflow presence, liquid media, and the use of the new scanning head on scanning process and accuracy. Each group underwent 15 scans, generating ample data for a robust statistical comparison. By evaluating trueness and precision in each group, the study assessed the impact of the compressed airflow system on the accuracy of IOS data collected from liquid-interference surfaces. Additionally, we selected Elite and Primescan scanners as references for numerical accuracy values. RESULTS: The scanning accuracy on liquid-interference surfaces was significantly reduced in terms of both trueness and precision [Trueness: 18.5 (6.5) vs. 38.0 (6.7), P < 0.05; Precision: 19.1 (8.5) vs. 31.7 (15.0), P < 0.05]. The use of the new scanning head assisted by the compressed airflow system significantly improved the scanning accuracy [Trueness: 22.3(7.6) vs. 38.0 (6.7), P < 0.05; Precision: 25.8 (9.6) vs. 31.7 (15.0), P < 0.05]. CONCLUSION The scanning head based on the compressed airflow system can assist in improving the accuracy of data obtained from liquid-interference surfaces by the IOS.
Imaging, Three-Dimensional/methods* ; Humans ; Dental Impression Technique/instrumentation*

OBJECTIVES: Platelet-rich plasma (PRP) treatment has been reported to improve ovarian function in women, but the relationship between the dose and frequency of PRP treatment and its therapeutic effect remains unclear. This study aims to evaluate the efficacy of single and double PRP treatments for diminished ovarian reserve (DOR). METHODS: A total of 65 patients treated at the Reproductive Center of Xiangtan Central Hospital from September 2020 to October 2022 were randomly divided into 4 groups: A single PRP treatment group (21 patients, PRP treatment once), a double PRP treatment group (15 patients, PRP treatment twice), a blank control group (15 patients), and an artificial cycle control group (14 patients, treated with estrogen and progesterone). The differences in baseline follicle-stimulating hormone (FSH), antral follicle count (AFC), ovarian volume, number of oocytes retrieved, number of good quality embryos, and pregnancy outcomes before and after treatment were compared among the 4 groups. RESULTS: Compared to before treatment, both single and double PRP treatment groups showed a significant reduction in FSH, and an increase in AFC, ovarian volume, numbers of oocytes retrieved, and number of MII oocytes (all P<0.05). Compared to the blank control group, the single and double PRP groups showed a decrease in FSH, with an increase in AFC, number of oocytes retrieved, and number of MII oocytes (all P<0.05). The rates of good quality embryos, clinical pregnancy rate, and live birth rate in the single and double PRP groups were higher than those in the blank control group and artificial cycle control groups, but the differences were not statistically significant (all P>0.05). Compared to the single PRP treatment group, the double PRP group had lower FSH and higher AFC, but the differences were not statistically significant (both P>0.05). CONCLUSIONS Both single and double PRP ovarian injections can effectively improve ovarian reserve function in DOR patients and enhance ovarian response. Compared to single PRP ovarian injection, double PRP ovarian injection shows a trend of better improvement in ovarian reserve function.
Humans ; Female ; Platelet-Rich Plasma ; Ovarian Reserve/physiology* ; Adult ; Pregnancy ; Follicle Stimulating Hormone/blood* ; Pregnancy Rate ; Ovary ; Ovulation Induction/methods* ; Ovarian Follicle ; Oocyte Retrieval