Retinal displacement refers to the strong fluorescent lines parallel to the retinal vessels that are detected through autofluorescence examination after rhegmatogenous retinal detachment(RRD)surgery. Actually, even if patients with RRD achieve macroscopic structural reattachment after the operation, the visual function of some patients remains suboptimal. This is associated with the incomplete recovery of retinal function, and retinal displacement is one of the critical influencing factors. This paper reviews the related concepts of retinal displacement and systematically summarizes the incidence of retinal displacement after RRD surgery and its impact on function, the possible mechanisms of retinal displacement, and the influence of various factors on the occurrence of retinal displacement reported in the recent 5 a. It is conducive to enabling surgeons to conduct better design and planning for retinal reattachment surgeries, then achieve higher integrity of retinal function recovery, and enable patients to obtain better postoperative visual function.

Instrument separation is a critical complication during root canal therapy, impacting treatment success and long-term tooth preservation. The etiology of instrument separation is multifactorial, involving the intricate anatomy of the root canal system, instrument-related factors, and instrumentation techniques. Instrument separation can hinder thorough cleaning, shaping, and obturation of the root canal, posing challenges to successful treatment outcomes. Although retrieval of separated instrument is often feasible, it carries risks including perforation, excessive removal of tooth structure and root fractures. Effective management of separated instruments requires a comprehensive understanding of the contributing factors, meticulous preoperative assessment, and precise evaluation of the retrieval difficulty. The application of appropriate retrieval techniques is essential to minimize complications and optimize clinical outcomes. The current manuscript provides a framework for understanding the causes, risk factors, and clinical management principles of instrument separation. By integrating effective strategies, endodontists can enhance decision-making, improve endodontic treatment success and ensure the preservation of natural dentition.
Humans ; Root Canal Therapy/adverse effects* ; Consensus ; Root Canal Preparation/adverse effects*

Objective:To analyze the mutation characteristics of rpoB gene in rifampicin-resistant Brucella strains. Methods:DNA of 4 rifampicin-resistant Brucella strains (JSY-26, G-9, WSY-13 and AW-3) isolated from Xinjiang Uygur Autonomous Region was selected, rifampicin rpoB gene was amplified by PCR and its nucleotide sequence was sequenced. The rpoB gene sequences of rifampicin-resistant Brucella standard strain (RB51) and sensitive strain (ALT-8) were used as reference, the mutation sites and types of the rpoB gene inside and outside the rifampicin resistance determination region (RRDR) of the 4 rifampicin-resistant Brucella strains were analyzed by Mega 7.0 software. Results:Through sequence alignment, both JSY-26 and WSY-13 strains underwent a single base point mutation at the RRDR 1 576 bp of the rpoB gene, with the base changing from guanine (G) to adenine (A). The G-9 strain underwent a single base point mutation at the RRDR 1 606 bp of the rpoB gene, with the base changing from cytosine (C) to A. The AW-3 strain showed 5 mutations of 3 types outside rpoB gene RRDR at 2 536, 2 537, 2 626, 2 636 and 2 654 bp, namely 3 insertion mutations [thymine (T) insertion once and C insertion twice], 1 deletion mutation (C deletion), and 1 single base point mutation (from G to C mutation).Conclusion:The RRDR mutations in the rpoB gene of the rifampicin-resistant Brucella strains are mainly characterized by single base point mutations, while multiple insertion and deletion mutations occur outside the RRDR.

Objective:To establish and assess the precision of pre-surgical condyle position planning using mandibular movement trajectory data for orthognathic surgery.Methods:Skull data from large-field cone beam computed tomography(CBCT)and dental oral scan data were imported into IVSPlan 1.0.25 software for 3D reconstruction and fusion,creating 3D models of the maxilla and mandible.Trajectory da-ta of mandibular movement were collected using a mandibular motion recorder,and the data were inte-grated with the jaw models within the software.Subsequently,three-dimensional trajectories of the con-dyle were obtained through matrix transformations,rendering them visually accessible.A senior oral and maxillofacial surgeon with experience in both diagnosis and treatment of temporomandibular joint disease and orthognathic surgery selected the appropriate condyle position using the condyle movement trajectory interface.During surgical design,the mobile mandibular proximal segment was positioned accordingly.Routine orthognathic surgical planning was completed by determining the location of the mandibular distal segment,which was based on occlusal relationships with maxilla and facial aesthetics.A virtual mandible model was created by integrating data from the proximal and distal segment bone.Subsequently,a solid model was generated through rapid prototyping.The titanium plate was pre-shaped on the mandibular model,and the screw hole positions were determined to design a condylar positioning guide device.In accordance with the surgical plan,orthognathic surgery was performed,involving mandibular bilateral sagittal split ramus osteotomy(SSRO).The distal segment of the mandible was correctly aligned inter-maxillary,while the proximal bone segment was positioned using the condylar positioning guide device and the pre-shaped titanium plate.The accuracy of this procedure was assessed in a study involving 10 patients with skeletal class Ⅱ malocclusion.Preoperative condyle location planning and intraoperative po-sitioning were executed using the aforementioned techniques.CBCT data were collected both before the surgery and 2 weeks after the procedure,and the root mean square(RMS)distance between the preope-rative design position and the actual postoperative condyle position was analyzed.Results:The RMS of the condyle surface distance measured was(1.59±0.36)mm(95％CI:1.35-1.70 mm).This value was found to be significantly less than 2 mm threshold recommended by the expert consensus(P＜0.05).Conclusion:The mandibular trajectory may play a guiding role in determining the position of the mandibular proximal segment including the condyle in the orthognathic surgery.Through the use of a con-dylar positioning guide device and pre-shaped titanium plates,the condyle positioning can be personalized and customized with clinically acceptable accuracy.

Objective:To investigate the reasonable airflow organization and exhaust system facilities during the operation of the inspection workshop, and solve the problem of the accumulation of harmful gases such as ozone and nitrogen oxides in the workshop.Methods:In May 2023, computational fluid dynamics (CFD) technology was used to numerically simulate the diffusion of ozone and nitrogen oxides generated by industrial radiographic inspection operations, and the comparative detection method was used to analyze the ozone and nitrogen oxides concentrations before and after the renovation of the ventilation system of the inspection workshop.Results:After the renovation of ventilation system, the average concentration of ozone in the inspection workshop decreased from 0.81 mg/m 3 to 0.03 mg/m 3, and the average concentration of nitrogen oxides decreased from 0.42 mg/m 3 to 0.01 mg/m 3, and the differences were statistically significant ( t=20.51, 10.38, P<0.001) . Conclusion:The ventilation facilities of the inspection workshop are set up in the airflow organization mode of sending up and down the exhaust, and the ventilation pipes are scientifically designed through the calculation of ventilation hydraulic balance, which can effectively control the concentration of harmful gases in the inspection workshop.

Objective:To investigate the reasonable airflow organization and exhaust system facilities during the operation of the inspection workshop, and solve the problem of the accumulation of harmful gases such as ozone and nitrogen oxides in the workshop.Methods:In May 2023, computational fluid dynamics (CFD) technology was used to numerically simulate the diffusion of ozone and nitrogen oxides generated by industrial radiographic inspection operations, and the comparative detection method was used to analyze the ozone and nitrogen oxides concentrations before and after the renovation of the ventilation system of the inspection workshop.Results:After the renovation of ventilation system, the average concentration of ozone in the inspection workshop decreased from 0.81 mg/m 3 to 0.03 mg/m 3, and the average concentration of nitrogen oxides decreased from 0.42 mg/m 3 to 0.01 mg/m 3, and the differences were statistically significant ( t=20.51, 10.38, P<0.001) . Conclusion:The ventilation facilities of the inspection workshop are set up in the airflow organization mode of sending up and down the exhaust, and the ventilation pipes are scientifically designed through the calculation of ventilation hydraulic balance, which can effectively control the concentration of harmful gases in the inspection workshop.

Fulminant myocarditis occurs suddenly and progresses rapidly, often leading to severe heart failure, hypotension, or cardiogenic shock. Widespread myocardial calcification secondary to fulminant myocarditis is clinically rare, with sporadic reports both domestically and internationally. This article reports a case of a young female patient who presented with acute onset and rapidly deteriorating condition, with imaging indicating myocardial calcification by the second day of hospitalization, highlighting the unusual speed of progression.

Hip fracture in the elderly is characterized by high incidence, high disability rate, and high mortality and has been recognized as a public health issue threatening their health. Surgery is the preferred choice for the treatment of elderly patients with hip fracture. However, lower extremity deep venous thrombosis (DVT) has an extremely high incidence rate during the perioperative period, and may significantly increase the risk of patients′ death once it progresses to pulmonary embolism. In response to this issue, the clinical guidelines and expert consensuses all emphasize active application of comprehensive preventive measures, including basic prevention, physical prevention, and pharmacological prevention. In this prevention system, basic prevention is the basis of physical and pharmacological prevention. However,there is a lack of unified and definite recommendations for basic preventive measures in clinical practice. To this end, the Orthopedic Nursing Professional Committee of the Chinese Nursing Association and Nursing Department of the Orthopedic Branch of the China International Exchange and Promotive Association for Medical and Health Care organized relevant nursing experts to formulate Expert consensus on perioperative basic prevention for lower extremity deep venous thrombosis in elderly patients with hip fracture ( version 2024) . A total of 10 recommendations were proposed, aiming to standardize the basic preventive measures for lower extremity DVT in elderly patients with hip fractures during the perioperative period and promote their subsequent rehabilitation.

Objective:To explore the value of mitoxantrone hydrochloride injection for tracing in endoscopic thyroidectomy (ETE) via anterior chest approach for papillary thyroid carcinoma (PTC) .Methods:A retrospective analysis was conducted on patients undergoing ETE via anterior chest approach for PTC admitted to Beijing Longfu Hospital (Medical Treatment Combination with Peking Union Medical College Hospital) from Sep. 2022 to Mar. 2024. The patients were divided into two groups: the control group (without tracer) and the tracer group (with mitoxantrone hydrochloride injection for tracing). All surgeries were performed by the same thyroid surgical team. Baseline, postoperative pathologies and complications were compared between the 2 groups.Results:A total of 25 patients (13 in the control group and 12 in the tracer group) were included in this study, and the average dissection of unilateral central region lymph nodes in the tracer group was 7.4±4.6, significantly more than in the control group (2.4±1.9) ( P=0.004). There were no instances of mistakenly resected parathyroid gland in the postoperative pathology or accidental injury of recurrent laryngeal nerve in either group. The incidence of transient hypocalcemia did not significantly different between the two groups ( P=0.503). However, the incidence of transient hypoparathyroidism in the tracer group was 1 (1/12,8.3%), significantly lower than in the control group 4 (4/13,30.8%) ( P=0.009). The tracer group exhibited more impressive levels in parathyroid hormone (5.4±8.1) pg/mL compared to the control group (20.0±11.1) pg/mL ( P=0.001) .The total volume of postoperative drainage in the tracer group (142.9±71.7) mL was more than that of the control group (87.7±38.8) mL ( P=0.030). But It did not affect the extubation time in either group ( P=0.610). No residual tracer was observed at the skin puncture site in the tracer group after 2 weeks. Conclusions:Mitoxantrone hydrochloride injection for tracing as tracer in ETE via breast approach can increase the number of pathological lymph nodes dissection in cervical central region. Combined with negative development, identifying and protecting the function of parathyroid glands show feasible and potential application value to improve the safety of thyroidectomy. The use of mitoxantrone hydrochloride injection for tracer has the risk of increased exudation from the surgical area, but does not affect the time to remove the drain.