OBJECTIVE: To explore the genetic etiology of 46 Chinese pedigrees affected with Hereditary multiple exostoses (HME) and provide genetic counseling and reproductive intervention. METHODS: Whole-exome sequencing and Sanger sequencing were carried out on 87 patients from the 46 pedigrees to analyze the variants of EXT1 and EXT2 genes. Pathogenicity of the variants was assessed based on the guidelines from the American College of Medical Genetics and Genomics and Association for Molecular Pathology (ACMG/AMP). Prenatal diagnosis and preimplantation genetic testing (PGT) were provided for couples with identified pathogenic mutations. This study was approved by the Medical Ethics Committee of the hospital (Ethics No.: LL-SC-SG-2014-010). RESULTS: In total 17 and 22 pathogenic variants were respectively identified in the EXT1 and EXT2 genes, among which 5 EXT1 and 12 EXT2 variants were unreported previously. Three patients with no family history were found to harbor de novo variants of the EXT1 gene. Twenty nine couples had opted for PGT or underwent prenatal diagnosis following natural conception, and 17 healthy babies were born. CONCLUSION This study has clarified the genetic etiology of 45 HME pedigrees and identified 17 novel variants, which has enriched the mutational spectrum of the EXT1 and EXT2 genes. Reproductive intervention through PGT and prenatal diagnosis have prevented the recurrence of HME in these families.
Humans ; Female ; Male ; Pedigree ; Exostoses, Multiple Hereditary/diagnosis* ; N-Acetylglucosaminyltransferases/genetics* ; Adult ; Exostosin 1 ; Asian People/genetics* ; Genetic Testing ; Exostosin 2 ; Mutation ; China ; Prenatal Diagnosis ; Pregnancy ; Genetic Counseling ; Preimplantation Diagnosis ; Exome Sequencing ; East Asian People

BACKGROUND:Abutment screw loosening is one of the most common mechanical complications in implant restoration.Mechanical wear,as a potential cause of thread loosening,warrants attention due to its impact on mechanical performance and long-term stability.However,studies on the mechanical effects of thread wear in abutment screws remain limited,and no definitive conclusions have been reached.OBJECTIVE:To investigate the effect of different degrees of mechanical wear on the spatial stress distribution of the Morse taper connection implant system,with a view to providing a theoretical basis for the clinical assessment of the long-term stability of dental implants.METHODS:Three-dimensional finite element models of Morse taper implants with central screw thread wear levels of 0,0.1,1,10,and 100 μm were established using SolidWorks software,and simulation analysis with Ansys Workbench software was performed.The implant models were inserted into artificial bone blocks(simulating type Ⅱ bone,with a cortical bone thickness of 2 mm on the outer layer and cancellous bone inside).An alternating load of 300 N in the buccolingual direction was applied at the centroid of the abutment(forming an angle of 30° with the long axis of the implant).The von Mises stress,principal stress,displacement,and fatigue life of the abutment,central screw,implant,and bone tissue in the five groups of models were analyzed.RESULTS AND CONCLUSION:(1)As the degree of mechanical wear on the central screw thread increased,the von Mises stress,principal stress,and strain in the implant and abutment also increased.The stress in the model was concentrated at the top of the implant,at the shoulder level of the implant,at the neck of the abutment,and at the bottom edge of the abutment.(2)Under moderate wear conditions(≥ 10 μm),the fatigue life of the implant system decreased by 30％,and the maximum von Mises stress of the central screw decreased by 37％,with the stress still primarily concentrated at the transition area between the head and the body of the central screw.(3)Under significant wear conditions(≥ 100 μm),the von Mises stress of the central screw decreased by 98％,with the stress concentrated at the screw head,and the fatigue life of the implant system decreased by 63％.Therefore,when the wear level of the central screw thread reaches ≥ 10 μm,the risk of screw loosening is significantly increased,and the fatigue life of the implant system is markedly reduced,warranting clinical attention.

BACKGROUND:Abutment screw loosening is one of the most common mechanical complications in implant restoration.Mechanical wear,as a potential cause of thread loosening,warrants attention due to its impact on mechanical performance and long-term stability.However,studies on the mechanical effects of thread wear in abutment screws remain limited,and no definitive conclusions have been reached.OBJECTIVE:To investigate the effect of different degrees of mechanical wear on the spatial stress distribution of the Morse taper connection implant system,with a view to providing a theoretical basis for the clinical assessment of the long-term stability of dental implants.METHODS:Three-dimensional finite element models of Morse taper implants with central screw thread wear levels of 0,0.1,1,10,and 100 μm were established using SolidWorks software,and simulation analysis with Ansys Workbench software was performed.The implant models were inserted into artificial bone blocks(simulating type Ⅱ bone,with a cortical bone thickness of 2 mm on the outer layer and cancellous bone inside).An alternating load of 300 N in the buccolingual direction was applied at the centroid of the abutment(forming an angle of 30° with the long axis of the implant).The von Mises stress,principal stress,displacement,and fatigue life of the abutment,central screw,implant,and bone tissue in the five groups of models were analyzed.RESULTS AND CONCLUSION:(1)As the degree of mechanical wear on the central screw thread increased,the von Mises stress,principal stress,and strain in the implant and abutment also increased.The stress in the model was concentrated at the top of the implant,at the shoulder level of the implant,at the neck of the abutment,and at the bottom edge of the abutment.(2)Under moderate wear conditions(≥ 10 μm),the fatigue life of the implant system decreased by 30％,and the maximum von Mises stress of the central screw decreased by 37％,with the stress still primarily concentrated at the transition area between the head and the body of the central screw.(3)Under significant wear conditions(≥ 100 μm),the von Mises stress of the central screw decreased by 98％,with the stress concentrated at the screw head,and the fatigue life of the implant system decreased by 63％.Therefore,when the wear level of the central screw thread reaches ≥ 10 μm,the risk of screw loosening is significantly increased,and the fatigue life of the implant system is markedly reduced,warranting clinical attention.

The study focuses on the concept of multifunctional traditional Chinese medicine (TCM) formulas and aims to evaluate the efficacy of the classical formula Xiaoyao San (逍遥散). Study employs the integrated evidence chain (Eff-iEC) method to organize, integrate, and evaluate its therapeutic efficacy in treating different diseases with the same therapy, and to investigate the feasibility of using Eff-iEC to evaluate the multifunctionality of TCM formulas. The evaluation covered Xiaoyao San's therapeutic effects on depression, premenstrual syndrome, chronic hepatitis, irritable bowel syndrome, dyspepsia, and menopausal syndrome. Concurrently, the Grading of Recommendations, Assessment, Development, and Evaluation (GRADE) system was used for evaluation, and authoritative medical documents were incorporated to corroborate the recognition of Xiaoyao San within the medical community. Depression and menopausal syndrome received higher ratings than other conditions in the Eff-iEC, GRADE, and Medical Community Recognition assessments. The Eff-iEC evidence grade for Xiaoyao San was rated as "High" or above for chronic hepatitis, irritable bowel syndrome, dyspepsia, and menopausal syndrome. Premenstrual syndrome received a "Moderate ⁺" rating. The GRADE evidence level was "Low-〇〇⨁⨁" for depression, premenstrual syndrome, and chronic hepatitis; "Moderate-〇⨁⨁⨁" for dyspepsia and menopausal syndrome; and "Very Low-〇〇〇⨁" for irritable bowel syndrome. Depression and menopausal syndrome had the highest inclusion frequency, appearing in all 4 categories. Premenstrual syndrome, chronic hepatitis, and dyspepsia are not recommended in Western medical guidelines, but they are included in TCM guidelines, the China National Basic Medical Insurance Drug List, and the China National Essential Drug List. Irritable bowel syndrome appears only in the China National Basic Medical Insurance Drug List and China National Essential Drug List. The evaluation results obtained using the Eff-iEC method align with Medical Community Recognition, providing an objective and comprehensive assessment of Xiaoyao San's efficacy. The findings suggest that Xiaoyao San has strong evidence for treating depression and menopausal syndrome. However, further experimental and clinical trials are needed to assess its efficacy in treating premenstrual syndrome, chronic hepatitis, irritable bowel syndrome, and dyspepsia. These results support the clinical efficacy and rational use of Xiaoyao San, expand the application scope of the Eff-iEC method, and offer valuable insights and methodological references for the comparative evaluation of multifunctional TCM formulas.

A dielectric barrier discharge ionization source with rapid evaporation and self-aspiration sampling(RE-SADBDI)was developed,integrating a rapid evaporation(RE)module and a dielectric barrier discharge ionization(DBDI)module.The sample was introduced into the RE module via a sampling swab and rapidly vaporized within it.The sealed design of the ionization source could enable the sample to be self-aspirated into the ionization region without the need of additional inert gas.All vaporized sample was efficiently directed into the ionization region due to the relatively enclosed environment for sample transfer and ionization,resulting in improved transfer and ionization efficiencies.Experimental results showed that the limit of detection(LOD)under ion isolation mode reached 0.05 ng/mL(caffeine),with a relative standard deviation(RSD)of 6.9%.Furthermore,when coupled with a miniaturized linear ion trap mass spectrometer,the source enabled real-time analysis of various sample types.The developed RE-SADBDI source was suitable for on-site analysis with miniaturized mass spectrometers.

Foodborne illnesses caused by Salmonella pose significant threats to worldwide public health safety.In this study,a rapid method for screening viable Salmonella in oyster sauce and milk was developed by utilizing an electronic microbial growth analyzer(EMGA).Target food samples were diluted 10-fold with RVS broth and loaded into test tubes.Test tubes were positioned in the EMGA to determine the bacterial growth curves and the time required to reach the maximum growth rate(Tmgr).Using Salmonella typhimurium(S.typhimurium)asan model species,there was linear relationship between the logarithmic value of viable bacterial concentration(lgC)and Tmgr over the range of 5×101-5×106 CFU/mL,with a detection limit of 10 CFU/mL.For oyster sauce,the regression equation was Tmgr(min)=-80.775lg[C/(CFU/mL)]+754.96(R2=0.9907),and the recovery rates of S.typhimurium ranged from 95.2%to 119.8%,with relative standard deviations(RSD)ranging from 3.5%to 16.3%.For milk,the regression equation was Tmgr(min)=-71.922 lg[C/(CFU/mL)]+618.65(R2=0.9985),with recovery rates ranging from 98.4%to 110.6%and RSD ranging from 6.4%to 12.8%.The EMGA method required only one portable instrument,and involving only three manual steps,i.e.,dilution,transfer,and insertion.When S.typhimurium contamination reached 106 CFU/mL,the total time consumption,from the unwrapping of samples to the readout of bacterial concentration,was no more than 7 h.When applied to detection of actual oyster sauce and milk samples,the new method demonstrated strong consistency with plate counting results in positive detection rates.This method was superior to the plate counting method,which was generally considered as a gold standard,in terms of accuracy,precision,simplicity and efficiency,representing a promising alternative for the on-site screening and quantification of viable Salmonella in oyster sauce and milk products.

Purpose: This study aimed to evaluate the long-term efficacy of the ligation of the intersphincteric fistula tract (LIFT) procedure in treating high transsphincteric fistulas. Methods: We conducted a retrospective study to evaluate the success rate of LIFT treatment in 82 patients with high transsphincteric fistulas involving at least one-third of the external sphincter. This study was carried out across 2 centers from November 2009 to February 2023. Results: All patients underwent successful surgery with a median operative time of 48.9 minutes (range, 20–80 minutes), and no intraoperative or postoperative complications were reported. The median follow-up duration was 85.5 months (range, 4–120 months), with 5 patients (6.1%) lost to follow-up. Treatment was successful in 62 patients, whose symptoms disappeared and both the external opening and the intersphincteric incision completely healed, yielding an overall efficiency rate of 80.5%. There were 15 cases (19.5%) of treatment failure, including 6 (7.8%) that converted to intersphincteric anal fistula and 9 (11.7%) that experienced persistent or recurrent fistulas. Only 1 patient reported minor overflow during the postoperative follow-up, but no other patients reported any significant discomfort. There were no statistically significant differences between patients with surgical success and those with treatment failure in terms of fistula length, history of previous abscess or anal fistula surgery, number of external orifices or fistulas, and location of fistulas (all P>0.05). Conclusion LIFT is a safe and effective sphincter-preserving procedure that yields satisfactory healing outcomes and has minimal impact on anal function.

Background As a pillar industry in China, the manufacturing sector has a high incidence of non-fatal occupational injuries. The factors influencing non-fatal occupational injuries in this industry are closely related at various levels, including individual, equipment, environment, and management, making the analysis of these influencing factors complex. Objective To identify influencing factors of non-fatal occupational injuries among manufacturing workers, providing a basis for targeted interventions and surveillance. Methods A total of 2243 frontline workers from cable and shipbuilding enterprises were selected as study subjects to investigate the incidence of non-fatal occupational injuries and collect information at four levels: individual, equipment, management, and environment in past 12 months. Data balancing was performed using resampling, and LASSO regression was used to select factors of non-fatal occupational injuries. The influence degree and type of variables were judged based on the magnitude of the estimated coefficients of each variable, where variables with estimated coefficients > 0 are risk factors, and those <0 are protective factors. The area under the receiver operating characteristic (ROC)curve (AUC) was used to test the performance of the model, with an AUC value > 0.7 indicating good model performance. Results Among the 2243 frontline workers, males accounted for 77.7% (1742 out of 2243), with the main age range being 40-49 years old, representing 29.5% (661 out of 2243), 82.7% of the workers (1854 out of 2243) were married, and 55.6% (1248 out of 2243) had a junior middle school education level. The average monthly income for 51.0% (1144 out of 2243) of the workers was between 5000 and 6999 Chinese Yuan. The incidence of non-fatal occupational injuries among the manufacturing workers was 8.4% (189/2243) in the past 12 months. Among the 22 factors associated with the occurrence of non-fatal occupational injuries (P<0.05), 10 were individual-level factors, including gender, smoking, alcohol consumption, colleague relationships, average exercise duration, job burnout, work fatigue, musculoskeletal disorders, cardiovascular diseases, and neurological and sensory organ diseases; 3 were equipment-level factors, including equipment operability, hazardous workpieces, and safety hazards; 5 were environmental-level factors, including low temperatures, special operations, noise, workspace size, and dirty and disorderly environment; and 4 were management-level factors, including daily working hours, weekly working days, overtime, and pre-job technical training. The AUC value of the LASSO regression model was 0.704 and the final model retained a total of 10 variables. Among them, there were 7 risk factors for non-fatal occupational injuries (coefficient > 0), including safety hazards, musculoskeletal disorders, dangerous workpieces, job burnout, dirty and disorderly environment, smoking, and male gender; and 3 protective factors (coefficient < 0), including pre-job technical training, good colleague relationship, and long working days per week. Conclusion Manufacturing enterprises need to focus on the incidence of non-fatal occupational injuries and conduct targeted interventions for non-fatal occupational injuries by controlling potential safety hazards, providing pre-job technical training, reducing dangerous workpieces, rectifying working environment, and reasonably arranging working hours.