PURPOSE: We carried out the study aiming to explore and analyze the risk factors, the distribution of pathogenic bacteria, and their antibiotic-resistance characteristics influencing the occurrence of surgical site infection (SSI), to provide valuable assistance for reducing the incidence of SSI after traumatic fracture surgery. METHODS: A retrospective case-control study enrolling 3978 participants from January 2015 to December 2019 receiving surgical treatment for traumatic fractures was conducted at Tangdu Hospital of Air Force Medical University. Baseline data, demographic characteristics, lifestyles, variables related to surgical treatment, and pathogen culture were harvested and analyzed. Univariate analyses and multivariate logistic regression analyses were used to reveal the independent risk factors of SSI. A bacterial distribution histogram and drug-sensitive heat map were drawn to describe the pathogenic characteristics. RESULTS: Included 3978 patients 138 of them developed SSI with an incidence rate of 3.47% postoperatively. By logistic regression analysis, we found that variables such as gender (males) (odds ratio (OR) = 2.012, 95% confidence interval (CI): 1.235 - 3.278, p = 0.005), diabetes mellitus (OR = 5.848, 95% CI: 3.513 - 9.736, p < 0.001), hypoproteinemia (OR = 3.400, 95% CI: 1.280 - 9.031, p = 0.014), underlying disease (OR = 5.398, 95% CI: 2.343 - 12.438, p < 0.001), hormonotherapy (OR = 11.718, 95% CI: 6.269 - 21.903, p < 0.001), open fracture (OR = 29.377, 95% CI: 9.944 - 86.784, p < 0.001), and intraoperative transfusion (OR = 2.664, 95% CI: 1.572 - 4.515, p < 0.001) were independent risk factors for SSI, while, aged over 59 years (OR = 0.132, 95% CI: 0.059 - 0.296, p < 0.001), prophylactic antibiotics use (OR = 0.082, 95% CI: 0.042 - 0.164, p < 0.001) and vacuum sealing drainage use (OR = 0.036, 95% CI: 0.010 - 0.129, p < 0.001) were protective factors. Pathogens results showed that 301 strains of 38 species of bacteria were harvested, among which 178 (59.1%) strains were Gram-positive bacteria, and 123 (40.9%) strains were Gram-negative bacteria. Staphylococcus aureus (108, 60.7%) and Enterobacter cloacae (38, 30.9%) accounted for the largest proportion. The susceptibility of Gram-positive bacteria to Vancomycin and Linezolid was almost 100%. The susceptibility of Gram-negative bacteria to Imipenem, Amikacin, and Meropenem exceeded 73%. CONCLUSION Orthopedic surgeons need to develop appropriate surgical plans based on the risk factors and protective factors associated with postoperative SSI to reduce its occurrence. Meanwhile, it is recommended to strengthen blood glucose control in the early stage of admission and for surgeons to be cautious and scientific when choosing antibiotic therapy in clinical practice.
Humans ; Surgical Wound Infection/epidemiology* ; Male ; Female ; Risk Factors ; Retrospective Studies ; Middle Aged ; Adult ; Case-Control Studies ; Fractures, Bone/surgery* ; Aged ; Drug Resistance, Bacterial ; Logistic Models ; Anti-Bacterial Agents/therapeutic use* ; Incidence ; Bacteria/drug effects*

Mycophenolic acid (MPA), the active moiety of both mycophenolate mofetil (MMF) and enteric-coated mycophenolate sodium (EC-MPS), serves as a primary immunosuppressant for maintaining solid organ transplants. Therapeutic drug monitoring (TDM) enhances treatment outcomes through tailored approaches. This study aimed to develop an evidence-based guideline for MPA TDM, facilitating its rational application in clinical settings. The guideline plan was drawn from the Institute of Medicine and World Health Organization (WHO) guidelines. Using the Delphi method, clinical questions and outcome indicators were generated. Systematic reviews, Grading of Recommendations Assessment, Development, and Evaluation (GRADE) evidence quality evaluations, expert opinions, and patient values guided evidence-based suggestions for the guideline. External reviews further refined the recommendations. The guideline for the TDM of MPA (IPGRP-2020CN099) consists of four sections and 16 recommendations encompassing target populations, monitoring strategies, dosage regimens, and influencing factors. High-risk populations, timing of TDM, area under the curve (AUC) versus trough concentration (C₀), target concentration ranges, monitoring frequency, and analytical methods are addressed. Formulation-specific recommendations, initial dosage regimens, populations with unique considerations, pharmacokinetic-informed dosing, body weight factors, pharmacogenetics, and drug‍-‍drug interactions are covered. The evidence-based guideline offers a comprehensive recommendation for solid organ transplant recipients undergoing MPA therapy, promoting standardization of MPA TDM, and enhancing treatment efficacy and safety.
Mycophenolic Acid/administration & dosage* ; Drug Monitoring/methods* ; Humans ; Organ Transplantation ; Immunosuppressive Agents/administration & dosage* ; Delphi Technique

Objective:To investigate whether biochanin A(BCA)has a protective effect against dextran sodium sulfate(DSS)-in-duced ulcerative colitis(UC)in mice.Methods:Thirty C57BL/6N mice were randomly divided into normal control group,DSS model group,sulfasalazine(SASP)-positive drug control group,and low/medium/high-dose(5 mg/kg,10 mg/kg,and 20 mg/kg)BCA groups.The mouse model of UC was induced by administering 2.5%DSS aqueous solution for 7 days.During the experimental period,both the normal control and model groups were given 0.5%carboxymethyl cellulose sodium solution daily by gavage.The positive control group was given 100 mg/kg SASP,while the BCA groups were given BCA suspensions at doses of 5 mg/kg,10 mg/kg,and 20 mg/kg.The ad-ministration lasted for 10 days.Body weight changes and fecal status of the mice were recorded every day;the colon was dissected,col-lected,and measured for its length.The colon was stained with Hematoxylin-Eosin for pathomorphological study.Quantitative poly-merase chain reaction was used to determine the levels of tumor necrosis factor-α(TNF-α),interleukin-6(IL-6),and interleukin-10(IL-10)in the colon.Immunofluorescence was used to determine the expression of tight junction proteins,zonula occluden-1(ZO-1)and occludin,in the colon.Results:It showed that 5 mg/kg and 10 mg/kg BCA significantly alleviated weight loss in mice with UC,while 5 mg/kg,10 mg/kg,and 20 mg/kg BCA reduced the disease activity index scores.Additionally,BCA showed similar effects to SASP in improving the structure and reducing the shortening of the colon in mice with UC.Compared with the model group,all BCA groups had significantly decreased TNF-α(P=0.024、P=0.060、P=0.003)and IL-6(P=0.002、P<0.001、P<0.001)and significantly increased IL-10(P=0.006、P=0.003、P<0.001),with varying degrees of up-regulated expression of tight junction proteins.Conclusion:BCA can effectively alleviate DSS-induced symptoms,reduce intes-tinal damage,and protect the intestinal barrier in mice with UC.

Iodine speciations in aquatic environments are affected by dissolved oxygen,redox potential,microbial activity,organic matter decomposition,light reaction,etc.Accurate quantification of iodine speciation can not only help to understand the geochemical cycle of iodine,but also help to trace and study environmental processes.Based on the combination of ion chromatography(IC)and inductively coupled plasma mass spectrometry(ICP-MS),a rapid and sensitive method was established for determining the speciations of iodine in environmental water samples including seawater,river water,lake water,rainwater,groundwater,etc.The results presented here showed that IO3?and I?in seawater were quickly separated and measured within 120 s when using guard column AG22 and 8 mmol/L(NH4)2CO3 as the mobile phase.While for lake water,river water and precipitation samples with high soluble organically bond iodine(SOI),an AS22 separation column(250 mm×4 mm)connected with a guard column and using 50 mmol/L(NH4)2CO3 as mobile phase could effectively separate unknown SOI from IO3? to achieve accurate quantification of IO3?.For accurate correction of iodine measurement signal fluctuations,133Cs was directly added to the(NH4)2CO3 mobile phase as an internal standard.The SOI content was calculated by the total iodine concentrations minus the sum of IO3?and I?.The precision of the established iodine speciation analytical method was better than 3.5%,and the standard addition experiment showed that the analytical method was accurate.When the injection volume was 25 μL,the detection limits were 0.011?0.025 μg/L for IO3? and 0.023?0.031 μg/L for I?,respectively.The method was successfully used to analyze IO3?,SOI and I? in environmental water samples,such as seawater,river water,rainwater and groundwater.

Plutonium isotopes(238Pu,239Pu,240Pu and 241Pu)in the environment are important"fingerprint"nuclides in the study of nuclear activity traceability.The content of plutonium isotopes in the environmental metrics is usually very low,and the measurement of these isotopes,especially 238Pu,using mass spectrometry is seriously interfered with by the coexisting 238U.The analysis of several plutonium isotopes in soil usually requires combination of multiple measurement techniques,which leads to a long analysis time and large uncertainty in the isotope ratio.In this work,the hydrous titanium oxide(HTiO)precipitated by the hydrolysis of titanium oxydichloride(TiOCl2)under near-neutral condition was used to preconcentrate plutonium from the soil digestion solution,and the highly efficient decontamination of 238U in the sample was achieved by TK200 resin column chromatography with a decontamination factor of 108.Simulation resuts of density functional theory(DFT)showed that NH3 was considered as a promising reaction gas to eliminate the interference of 238U from 238Pu measurement using mass spectrometry due to the significant discrepancy of the chemical reactivity of U+and Pu+with the reactive gas NH3.Experiments confirmed that by optimizing the flow rates of collision gas(He)and reaction gas(NH3),the interference of 238U could be effectively suppressed,and the decontamination factor of 238U was 104.Combined with chemical separation,the overall decontamination factor of 238U could reach 1012 by using the developed method.By combining chemical separation and tandem quadrupole inductively coupled plasmon-mass spectrometry(ICP-MS/MS)measurement,the simultaneous determination of four ultra-trace plutonium isotopes in soil was realized,and the detection limit of plutonium isotopes was at the femtogram level.Analysis of the international standard reference materials(NIST-SRM-4357 and IAEA-384)showed that the established method could be successfully used for the accurate analysis of ultra-trace four plutonium isotopes(238Pu,239Pu,240Pu and 241Pu)in soil samples.

The cycling of iodine in the atmosphere and ocean plays a critical role in climate and environmental change.Ice cores and tree rings,as ideal climate archives,can provide essential data for paleoclimate reconstruction through accurate iodine analysis.However,iodine concentrations in ice core samples are as low as 0.01 μg/L,and as low as 0.01 μg/g in tree rings.Most currently reported analytical methods face challenges in accurately quantifying such low levels.In this study,a highly sensitive analytical method for trace iodine in environmental samples was developed based on inductively coupled plasma mass spectrometry(ICP-MS),incorporating a collision/reaction cell under the optimized collision/reaction gas conditions.Collision/reaction cell mode was employed to evaluate potential interferences in determination of trace iodine by ICP-MS.The results indicated that peak tailing from adjacent mass-to-charge ratios and polyatomic ion interferences could be considered negligible.However,residual iodine in ultrapure water constituted the major source of background,highlighting the need for strict control of sample pretreatment and procedural blanks in trace-level iodine analysis.By utilizing collision focusing effect of helium,the measurement sensitivity of iodine was enhanced to 3.5×105 cps(counts per second)/(μg/L),and the detection limit was reduced to 0.002 μg/L.The developed method exhibited a deviation of less than 2.3%in measurement of low-concentration standard solutions,indicating good accuracy.For actual samples and blanks,the precision of repeated measurements within 2 h was better than 1.6%,demonstrating excellent repeatability.No significant memory effect was observed during the measurements.The established method was successfully applied to determination of trace iodine in ice cores,tree rings,and other environmental samples,providing a robust technical foundation for investigating the role of iodine in climate and environmental change.

Osteoporotic proximal humeral fracture (OPHF) is one of the common osteoporotic fractures in the aged, with an incidence only lower than vertebral compression fracture, hip fracture, and distal radius fracture. OPHF, secondary to osteoporosis and characterized by poor bone quality, comminuted fracture pattern, slow healing, and severely impaired shoulder joint function, poses a big challenge to the current clinical diagnosis and treatment. In the field of diagnosis, treatment, and rehabilitation of OPHF, traditional Chinese and Western medicine have accumulated rich experience and evidence from evidence-based medicine and achieved favorable outcomes. However, there is still a lack of guidance from a relevant consensus as to how to integrate the advantages of the two medical systems and achieve the integrated diagnosis and treatment. To promote the diagnosis and treatment of OPHF with integrated traditional Chinese and Western medicine, relevant experts from Orthopedic Expert Committee of Geriatric Branch of Chinese Association of Gerontology and Geriatrics, Youth Osteoporosis Group of Orthopedic Branch of Chinese Medical Association, Osteoporosis Group of Orthopedic Surgeon Branch of Chinese Medical Doctor Association, and Osteoporosis Committee of Shanghai Association of Integrated Traditional Chinese and Western Medicine have been organized to formulate Expert consensus on the diagnosis and treatment of osteoporotic proximal humeral fracture with integrated traditional Chinese and Western medicine ( version 2024) by searching related literatures and based on the evidences from evidence-based medicine. This consensus consists of 13 recommendations about the diagnosis, treatment and rehabilitation of OPHF with integrated traditional Chinese medicine and Western medicine, aimed at standardizing, systematizing, and personalizing the diagnosis and treatment of OPHF with integrated traditional Chinse and Western medicine to improve the patients ′ function.

The pathogenesis of osteoarthritis (OA) is related to a variety of factors such as mechanical overload, metabolic dysfunction, aging, etc., and is a group of total joint diseases characterized by intra-articular chondrocyte apoptosis, cartilage fibrillations, synovial inflammation, and osteophyte formation. At present, the treatment methods for osteoarthritis include glucosamine, non-steroidal anti-inflammatory drugs, intra-articular injection of sodium hyaluronate, etc., which are difficult to take effect in a short period of time and require long-term treatment, so the patients struggle to adhere to doctor’s advice. Some methods can only provide temporary relief without chondrocyte protection, and some even increase the risk of cardiovascular disease and gastrointestinal disease. In the advanced stages of OA, patients often have to undergo joint replacement surgery due to pain and joint dysfunction. Mitochondrial dysfunction plays an important role in the development of OA. It is possible to improve mitochondrial biogenesis, quality control, autophagy balance, and oxidative stress levels, thereby exerting a protective effect on chondrocytes in OA. Therefore, compared to traditional treatments, improving mitochondrial function may be a potential treatment for OA. Here, we collected relevant literature on mitochondrial research in OA in recent years, summarized the potential pathogenic factors that affect the development of OA through mitochondrial pathways, and elaborated on relevant treatment methods, in order to provide new diagnostic and therapeutic ideas for the research field of osteoarthritis.

In this work,a reliable analytical method for ultra-low 239,240Pu in biological samples was developed.Sodium carbonate and magnesium acetate were used as saponification agent and ashing aid,respectively,and then Fe(OH)2-Fe(OH)3 was used for co-precipitation separation and enrichment of plutonium extracted from the ashing samples.Then aluminum nitrate was used as a masking agent to eliminate the interference of a large amount of phosphorus in the loading solution on plutonium during the anion exchange separation process.The results showed that the average recovery of plutonium was more than 73%and the decontamination factor for 238U was 3.3×104-5.4×105 in biological samples.The ultimate sample introduction technology(APEX-Ω)was used in determination of plutonium isotopes by inductively coupled plasma mass spectrometry(ICP-MS/MS)with NH3-He as the collision/reaction gas.The 242Pu standard added before sample separation was used as the yield tracer and isotope diluent to calculate the concentration of 239Pu and 240Pu in samples.This method not only effectively suppressed the 238U peak tail and 238U1H+interference,but also greatly improved the analytical sensitivity of plutonium from 850 cps/(pg/g)(ICP-MS/MS)to 8000 cps/(pg/g)(APEX-ICP-MS/MS).The detection limits of 239Pu and 240Pu in 3.5 kg fresh fish samples were as low as 2.56×10-4 mBq/(kg·wet)and 7.33×10-4 mBq/(kg·wet),respectively.The detection limits of 239Pu and 240Pu in 300 g fresh seaweed samples(30 g dry weight)were 2.98×10-3 mBq/(kg·wet)and 8.55×10-3 mBq/(kg·wet).The concentrations of 239Pu and 240Pu in marine biological samples from the China Sea have been successfully analyzed by using the established analytical method.

Digital intraoral scanning is a hot topic in the field of oral digital technology.In recent years,digital intra-oral scanning has gradually become the mainstream technology in orthodontics,prosthodontics,and implant dentistry.The precision of digital intraoral scanning and the accuracy and stitching of data collection are the keys to the success of the impression.However,the operators are less familiar with the intraoral scanning characteristics,imaging process-ing,operator scanning method,oral tissue specificity of the scanned object,and restoration design.Thus far,no unified standard and consensus on digital intraoral scanning technology has been achieved at home or abroad.To deal with the problems encountered in oral scanning and improve the quality of digital scanning,we collected common expert opin-ions and sought to expound the causes of scanning errors and countermeasures by summarizing the existing evidence.We also describe the scanning strategies under different oral impression requirements.The expert consensus is that due to various factors affecting the accuracy of digital intraoral scanning and the reproducibility of scanned images,adopting the correct scanning trajectory can shorten clinical operation time and improve scanning accuracy.The scanning trajec-tories mainly include the E-shaped,segmented,and S-shaped methods.When performing fixed denture restoration,it is recommended to first scan the abutment and adjacent teeth.When performing fixed denture restoration,it is recommend-ed to scan the abutment and adjacent teeth first.Then the cavity in the abutment area is excavated.Lastly,the cavity gap was scanned after completing the abutment preparation.This method not only meets clinical needs but also achieves the most reliable accuracy.When performing full denture restoration in edentulous jaws,setting markers on the mucosal tissue at the bottom of the alveolar ridge,simultaneously capturing images of the vestibular area,using different types of scanning paths such as Z-shaped,S-shaped,buccal-palatal and palatal-buccal pathways,segmented scanning of dental arches,and other strategies can reduce scanning errors and improve image stitching and overlap.For implant restora-tion,when a single crown restoration is supported by implants and a small span upper structure restoration,it is recom-mended to first pre-scan the required dental arch.Then the cavity in the abutment area is excavated.Lastly,scanning the cavity gap after installing the implant scanning rod.When repairing a bone level implant crown,an improved indi-rect scanning method can be used.The scanning process includes three steps:First,the temporary restoration,adjacent teeth,and gingival tissue in the mouth are scanned;second,the entire dental arch is scanned after installing a standard scanning rod on the implant;and third,the temporary restoration outside the mouth is scanned to obtain the three-di-mensional shape of the gingival contour of the implant neck,thereby increasing the stability of soft tissue scanning around the implant and improving scanning restoration.For dental implant fixed bridge repair with missing teeth,the mobility of the mucosa increases the difficulty of scanning,making it difficult for scanners to distinguish scanning rods of the same shape and size,which can easily cause image stacking errors.Higher accuracy of digital implant impres-sions can be achieved by changing the geometric shape of the scanning rods to change the optical curvature radius.The consensus confirms that as the range of scanned dental arches and the number of data concatenations increases,the scanning accuracy decreases accordingly,especially when performing full mouth implant restoration impressions.The difficulty of image stitching processing can easily be increased by the presence of unstable and uneven mucosal mor-phology inside the mouth and the lack of relatively obvious and fixed reference objects,which results in insufficient ac-curacy.When designing restorations of this type,it is advisable to carefully choose digital intraoral scanning methods to obtain model data.It is not recommended to use digital impressions when there are more than five missing teeth.