Objective To investigate the changing distribution and antibiotic resistance profiles of clinical isolates of Staphylococcus in hospitals across China from 2015 to 2021.Methods Antimicrobial susceptibility testing was conducted for the clinical isolates of Staphylococcus according to the unified protocol of CHINET(China Antimicrobial Surveillance Network)using disk diffusion method and commercial automated systems.The CHINET antimicrobial resistance surveillance data from 2015 to 2021 were interpreted according to the 2021 CLSI breakpoints and analyzed using WHONET 5.6.Results During the period from 2015 to 2021,a total of 204,771 nonduplicate strains of Staphylococcus were isolated,including 136,731(66.8％)strains of Staphylococcus aureus and 68,040(33.2％)strains of coagulase-negative Staphylococcus(CNS).The proportions of S.aureus isolates and CNS isolates did not show significant change.S.aureus strains were mainly isolated from respiratory specimens(38.9±5.1)％,wound,pus and secretions(33.6±4.2)％,and blood(11.9±1.5)％.The CNS strains were predominantly isolated from blood(73.6±4.2)％,cerebrospinal fluid(12.1±2.5)％,and pleural effusion and ascites(8.4±2.1)％.S.aureus strains were mainly isolated from the patients in ICU(17.0±7.3)％,outpatient and emergency(11.6±1.7)％,and department of surgery(11.2±0.9)％,whereas CNS strains were primarily isolated from the patients in ICU(32.2±9.7)％,outpatient and emergency(12.8±4.7)％,and department of internal medicine(11.2±1.9)％.The prevalence of methicillin-resistant strains was 32.9％in S.aureus(MRSA)and 74.1％in CNS(MRCNS).Over the 7-year period,the prevalence of MRSA decreased from 42.1％to 29.2％,and the prevalence of MRCNS decreased from 82.1％to 68.2％.MRSA showed higher resistance rates to all the antimicrobial agents tested except trimethoprim-sulfamethoxazole than methicillin-susceptible S.aureus(MSSA).Over the 7-year period,MRSA strains showed decreasing resistance rates to gentamicin,rifampicin,and levofloxacin,MRCNS showed decreasing resistance rates to gentamicin,erythromycin,rifampicin,and trimethoprim-sulfamethoxazole,but increasing resistance rate to levofloxacin.No vancomycin-resistant strains were detected.The prevalence of linezolid-resistant MRCNS increased from 0.2％to 2.3％over the 7-year period.Conclusions Staphylococcus remains the major pathogen among gram-positive bacteria.MRSA and MRCNS were still the principal antibiotic-resistant gram-positive bacteria.No S.aureus isolates were found resistant to vancomycin or linezolid,but linezolid-resistant strains have been detected in MRCNS isolates,which is an issue of concern.

This study was aimed at examining the influence of meteorological factors on scrub typhus in Xiamen.Scrub ty-phus monitoring data and meteorological factors were collected in Xiamen from 2005 to 2023.Spearman correlation analysis and nonlinear regression were used to analyze the correlation between scrub typhus incidence and meteorological factors.The inci-dence of scrub typhus first increased and subsequently decreased in Xiamen from 2005 to 2023.The highest incidence was be-tween 2014 and 2016,and the peak incidence was from June to October.The monthly incidence of scrub typhus positively cor-related with daily minimum temperature(r=0.637,P＜0.001,daily average temperature(r=0.627,P＜0.001),daily maxi-mum temperature(r=0.612,P＜0.001),sunshine duration(r=0.405,P＜0.001),average relative humidity(r=0.346,P＜0.001),and daily rainfall(r=0.207,P=0.002),and negatively correlated with average atmospheric pressure(r=-0.549,P＜0.001),whereas no correlation was observed with the average wind speed in Xiamen.The regression equation of scrub ty-phus monthly incidence and meteorological parameters was y=-433.869-11.503x1+0.381x1 2+9.150x2-0.197x2 2+3.936 x3-0.132x3 2+0.881x4+0.035x4 2-1.048x5+0.009x5 2+0.186x6-0.023x6 2+0.421x7+6.210×10-5x8-1.051 × 10-10x8 2 in Xiamen,and the R2 was 0.473,thus indicating good model fit.Scrub typhus incidence correlated with the daily minimum av-erage temperature,average temperature,daily maximum tem-perature,sunshine duration,daily rainfall,relative humidity,and average atmospheric pressure in Xiamen.Various meteoro-logical factors had differing effects on scrub typhus.

Objective Studies on the relationship between iodine,vitamin A(VA),and vitamin D(VD)and thyroid function are limited.This study aimed to analyze iodine and thyroid-stimulating hormone(TSH)status and their possible relationships with VA,VD,and other factors in postpartum women. Methods A total of 1,311 mothers(896 lactating and 415 non-lactating)from Hebei,Zhejiang,and Guangxi provinces were included in this study.The urinary iodine concentration(UIC),TSH,VA,and VD were measured. Results The median UIC of total and lactating participants were 142.00 μg/L and 139.95 μg/L,respectively.The median TSH,VA,and VD levels in all the participants were 1.89 mIU/L,0.44 μg/mL,and 24.04 ng/mL,respectively.No differences in the UIC were found between lactating and non-lactating mothers.UIC and TSH levels were significantly different among the three provinces.The rural UIC was higher than the urban UIC.Obese mothers had a higher UIC and a higher prevalence of excessive TSH.Higher UICs and TSHs levels were observed in both the VD deficiency and insufficiency groups than in the VD-sufficient group.After adjustment,no linear correlation was observed between UIC and VA/VD.No interaction was found between vitamins A/D and UIC on TSH levels. Conclusion The mothers in the present study had no iodine deficiency.Region,area type,BMI,and VD may be related to the iodine status or TSH levels.

Objective: To analyze the prevalence and the risk factors of fungal sepsis in 25 neonatal intensive care units (NICU) among preterm infants in China, and to provide a basis for preventive strategies of fungal sepsis. Methods: This was a second-analysis of the data from the "reduction of infection in neonatal intensive care units using the evidence-based practice for improving quality" study. The current status of fungal sepsis of the 24 731 preterm infants with the gestational age of <34⁺⁰ weeks, who were admitted to 25 participating NICU within 7 days of birth between May 2015 and April 2018 were retrospectively analyzed. These preterm infants were divided into the fungal sepsis group and the without fungal sepsis group according to whether they developed fungal sepsis to analyze the incidences and the microbiology of fungal sepsis. Chi-square test was used to compare the incidences of fungal sepsis in preterm infants with different gestational ages and birth weights and in different NICU. Multivariate Logistic regression analysis was used to study the outcomes of preterm infants with fungal sepsis, which were further compared with those of preterm infants without fungal sepsis. The 144 preterm infants in the fungal sepsis group were matched with 288 preterm infants in the non-fungal sepsis group by propensity score-matched method. Univariate and multivariate Logistic regression analysis were used to analyze the risk factors of fungal sepsis. Results: In all, 166 (0.7%) of the 24 731 preterm infants developed fungal sepsis, with the gestational age of (29.7±2.0) weeks and the birth weight of (1 300±293) g. The incidence of fungal sepsis increased with decreasing gestational age and birth weight (both P<0.001). The preterm infants with gestational age of <32 weeks accounted for 87.3% (145/166). The incidence of fungal sepsis was 1.0% (117/11 438) in very preterm infants and 2.0% (28/1 401) in extremely preterm infants, and was 1.3% (103/8 060) in very low birth weight infants and 1.7% (21/1 211) in extremely low birth weight infants, respectively. There was no fungal sepsis in 3 NICU, and the incidences in the other 22 NICU ranged from 0.7% (10/1 397) to 2.9% (21/724), with significant statistical difference (P<0.001). The pathogens were mainly Candida (150/166, 90.4%), including 59 cases of Candida albicans and 91 cases of non-Candida albicans, of which Candida parapsilosis was the most common (41 cases). Fungal sepsis was independently associated with increased risk of moderate to severe bronchopulmonary dysplasia (BPD) (adjusted OR 1.52, 95%CI 1.04-2.22, P=0.030) and severe retinopathy of prematurity (ROP) (adjusted OR 2.55, 95%CI 1.12-5.80, P=0.025). Previous broad spectrum antibiotics exposure (adjusted OR=2.50, 95%CI 1.50-4.17, P<0.001), prolonged use of central line (adjusted OR=1.05, 95%CI 1.03-1.08, P<0.001) and previous total parenteral nutrition (TPN) duration (adjusted OR=1.04, 95%CI 1.02-1.06, P<0.001) were all independently associated with increasing risk of fungal sepsis. Conclusions: Candida albicans and Candida parapsilosis are the main pathogens of fungal sepsis among preterm infants in Chinese NICU. Preterm infants with fungal sepsis are at increased risk of moderate to severe BPD and severe ROP. Previous broad spectrum antibiotics exposure, prolonged use of central line and prolonged duration of TPN will increase the risk of fungal sepsis. Ongoing initiatives are needed to reduce fungal sepsis based on these risk factors.
Infant ; Infant, Newborn ; Humans ; Birth Weight ; Intensive Care Units, Neonatal ; Retrospective Studies ; Tertiary Care Centers ; Infant, Extremely Low Birth Weight ; Gestational Age ; Infant, Extremely Premature ; Sepsis/epidemiology* ; Retinopathy of Prematurity/epidemiology* ; Bronchopulmonary Dysplasia/epidemiology*

With the growing demand of personalized medicine for children, it is especially important to develop medicines for children. In this study, using metoprolol tartrate as model drug, we developed 3D printed chewable tablets suitable for children with automated dosage distribution using semi-solid extruded (SSE) 3D printing technology. Based on the quality by design concept, this study prepared a semi-solid material with good printability using gelatin as the substrate, constructed 3D models and printed tablets with the aid of computer-aided design. The printing parameters were optimized and determined as follows: print temperature of 35-37 ℃, print speed of 25 mm·s^-1, fill rate of 15%, and number of outer profile layers of 2. Subsequently, the printing process and the quality uniformity of the tablets were verified, and a linear relationship between the dose and the number of model layers was obtained. Finally, 3D printed chewable tablets were superior in terms of appearance, dose accuracy and compliance compared with traditional split-dose commercially available tablets. In this study, 3D printed metoprolol tartrate chewable tablets with good performance were successfully prepared to address the personalized medication needs of pediatric patients.

Based on the dual needs of analgesia and anti-inflammation in trauma treatment, this study uses acetaminophen and moxifloxacin hydrochloride as active pharmaceutical ingredients and develops a composite bilayer tablet with a dual-phase drug release system by using binder jet 3D printing technology. Due to the complexity of the 3D printing process, there is an interaction between the various parameters. Through the optimization of the process, the relationship between the key process parameters can be determined more intuitively. In this study, the process of extended-release tablets was optimized to maintain the mechanical properties of the tablets while realizing the regulation of release. The full-factor experimental design of three central points 2³ was used to analyze the factors that significantly affect the quality attributes of extended-release tablets and the interaction between factors. The optimal extended-release process parameters were obtained by the response optimizer: the inkjet quantity of the printing ink was 10 (about 13.8 pL), the powder thickness was 180 μm, and the running speed was 360 mm·s^-1. The in vitro of release of 3D printed composite bilayer tablets showed that the in vitro of release of 3D printed tablets and commercially available tablets conformed to the Ritger-Peppas release model. The results of porosity showed that the immediate-release layer of the preparation has many pores and large pore size, and the dissolution of the immediate release layer within 15 min was greater than 85%. The internal pore size of the extended release layer is large, but it can still release slowly for up to 8 h, the mechanism may be related to the extended release of HPMC gelation. On the basis of verifying the rationality of the design goal of 3D printed composite bilayer tablets, this study also provides a theoretical basis for the preparation of 3D printing complex preparations.

OBJECTIVE: To observe the efficacy and safety of CLAE intensive chemotherapy followed by allogeneic hematopoietic stem cell transplantation (allo-HSCT) in patients with relapsed/refractory acute leukemia (R/R AL). METHODS: CLAE regimen [cladribine 5 mg/(m²·d), d 1-5; cytarabine 1.5 g/(m²·d), d 1-5; etoposide 100 mg/(m²·d), d 3-5] followed by allo-HSCT was used to treat 3 R/R AL patients. The patients received CLAE chemotherapy in relapsed or refractory status and underwent bone marrow puncture to judge myelodysplastic state. After an interval of 3 to 5 days, followed by preconditioning regimen for allo-HSCT [fludarabine 30 mg/(m²·d), d -7 to d -3; busulfan 0.8 mg/kg q6h, d -6 to d -3 or d -5 to d -2. If the bone marrow hyperplasia was not active and the blasts were less than 10%, busulfan should be used for 3 days. If the bone marrow hyperplasia was active and the blasts were more than 10%, busulfan should be used for 4 days]. Cyclosporin A, mycophenolate mofetil and short-term methotrexate were used for graft-versus-host disease (GVHD) prevention. After transplantation, the status of minimal residual disease (MRD) and bone marrow chimerism were regularly monitored in all 3 patients, and demethylation drugs or dasatinib were used to prevent recurrence 3 months after transplantation. RESULTS: 2 patients with t(11;19) translocation and relapse/refractory acute myeloid leukemia recurred within 6 months after induction of remission, and received intensive chemotherapy with CLAE regimen followed by haploidentical allo-HSCT and unrelated donor allo-HSCT, respectively. The two patients both relapsed 6 months after transplantation, then achieved complete remission by donor lymphocyte infusion, interferon, interleukin-2 and other methods, and disease-free survival was 2 years after transplantation. The other patient was chronic myelogenous leukemia who developed acute lymphoblastic leukemia during oral administration of tyrosine kinase inhibitor, accompanied by T315I and E255K mutations in ABL1 kinase region and additional chromosomal abnormalities. After morphological remission by induction chemotherapy, central nervous system leukemia was complicated. Intensive chemotherapy with CLAE regimen followed by sibling allo-HSCT was performed in the positive state of MRD. The patient relapsed 3 months after transplantation, and achieved remission after chimeric antigen receptor T-cell (CAR-T) therapy, however, he died 5 months after transplantation because of severe cytokine release syndrome (CRS) and GVHD. CONCLUSION CLAE regimen followed by allo-HSCT may be an effective salvage treatment option for R/R AL patients to prolong the overall survival.
Male ; Humans ; Busulfan/therapeutic use* ; Hematopoietic Stem Cell Transplantation/adverse effects* ; Treatment Outcome ; Leukemia, Myeloid, Acute/etiology* ; Acute Disease ; Graft vs Host Disease/prevention & control*

Objective: This cross-sectional investigation aimed to determine the incidence, clinical characteristics, prognosis, and related risk factors of olfactory and gustatory dysfunctions related to infection with the SARS-CoV-2 Omicron strain in mainland China. Methods: Data of patients with SARS-CoV-2 from December 28, 2022, to February 21, 2023, were collected through online and offline questionnaires from 45 tertiary hospitals and one center for disease control and prevention in mainland China. The questionnaire included demographic information, previous health history, smoking and alcohol drinking, SARS-CoV-2 vaccination, olfactory and gustatory function before and after infection, other symptoms after infection, as well as the duration and improvement of olfactory and gustatory dysfunction. The self-reported olfactory and gustatory functions of patients were evaluated using the Olfactory VAS scale and Gustatory VAS scale. Results: A total of 35 566 valid questionnaires were obtained, revealing a high incidence of olfactory and taste dysfunctions related to infection with the SARS-CoV-2 Omicron strain (67.75%). Females(χ2=367.013, P<0.001) and young people(χ2=120.210, P<0.001) were more likely to develop these dysfunctions. Gender(OR=1.564, 95%CI: 1.487-1.645), SARS-CoV-2 vaccination status (OR=1.334, 95%CI: 1.164-1.530), oral health status (OR=0.881, 95%CI: 0.839-0.926), smoking history (OR=1.152, 95%CI=1.080-1.229), and drinking history (OR=0.854, 95%CI: 0.785-0.928) were correlated with the occurrence of olfactory and taste dysfunctions related to SARS-CoV-2(above P<0.001). 44.62% (4 391/9 840) of the patients who had not recovered their sense of smell and taste also suffered from nasal congestion, runny nose, and 32.62% (3 210/9 840) suffered from dry mouth and sore throat. The improvement of olfactory and taste functions was correlated with the persistence of accompanying symptoms(χ2=10.873, P=0.001). The average score of olfactory and taste VAS scale was 8.41 and 8.51 respectively before SARS-CoV-2 infection, but decreased to3.69 and 4.29 respectively after SARS-CoV-2 infection, and recovered to 5.83and 6.55 respectively at the time of the survey. The median duration of olfactory and gustatory dysfunctions was 15 days and 12 days, respectively, with 0.5% (121/24 096) of patients experiencing these dysfunctions for more than 28 days. The overall self-reported improvement rate of smell and taste dysfunctions was 59.16% (14 256/24 096). Gender(OR=0.893, 95%CI: 0.839-0.951), SARS-CoV-2 vaccination status (OR=1.334, 95%CI: 1.164-1.530), history of head and facial trauma(OR=1.180, 95%CI: 1.036-1.344, P=0.013), nose (OR=1.104, 95%CI: 1.042-1.171, P=0.001) and oral (OR=1.162, 95%CI: 1.096-1.233) health status, smoking history(OR=0.765, 95%CI: 0.709-0.825), and the persistence of accompanying symptoms (OR=0.359, 95%CI: 0.332-0.388) were correlated with the recovery of olfactory and taste dysfunctions related to SARS-CoV-2 (above P<0.001 except for the indicated values). Conclusion: The incidence of olfactory and taste dysfunctions related to infection with the SARS-CoV-2 Omicron strain is high in mainland China, with females and young people more likely to develop these dysfunctions. Active and effective intervention measures may be required for cases that persist for a long time. The recovery of olfactory and taste functions is influenced by several factors, including gender, SARS-CoV-2 vaccination status, history of head and facial trauma, nasal and oral health status, smoking history, and persistence of accompanying symptoms.
Female ; Humans ; Adolescent ; SARS-CoV-2 ; Smell ; COVID-19/complications* ; Cross-Sectional Studies ; COVID-19 Vaccines ; Incidence ; Olfaction Disorders/etiology* ; Taste Disorders/etiology* ; Prognosis

BACKGROUND: Controversy exists as to the optimal treatment approach for ostial left anterior descending (LAD) or ostial left circumflex artery (LCx) lesions. Drug-coated balloons (DCB) may overcome some of the limitations of drug-eluting stents (DES). Therefore, we investigated the security and feasibility of the DCB policy in patients with ostial LAD or ostial LCx lesions, and compared it with the conventional DES-only strategy. METHODS: We retrospectively enrolled patients with de novo ostial lesions in the LAD or LCx who underwent interventional treatment. They were categorized into two groups based on their treatment approach: the DCB group and the DES group. The treatment strategies in the DCB group involved the use of either DCB-only or hybrid strategies, whereas the DES group utilized crossover or precise stenting techniques. Two-year target lesion revascularization was the primary endpoint, while the rates of major adverse cardiovascular events, cardiac death, target vessel myocardial infarction, and vessel thrombosis were the secondary endpoints. Using propensity score matching, we assembled a cohort with comparable baseline characteristics. To ensure result analysis reliability, we conducted sensitivity analyses, including interaction, and stratified analyses. RESULTS: Among the 397 eligible patients, 6.25% of patients who were planned to undergo DCB underwent DES. A total of 108 patients in each group had comparable propensity scores and were included in the analysis. Two-year target lesion revascularization occurred in 5 patients (4.90%) and 16 patients (16.33%) in the DCB group and the DES group, respectively (odds ratio = 0.264, 95% CI: 0.093-0.752, P = 0.008). Compared with the DES group, the DCB group demonstrated a lower major adverse cardiovascular events rate (7.84% vs. 19.39%, P = 0.017). However, differences with regard to cardiac death, non-periprocedural target vessel myocardial infarction, and definite or probable vessel thrombosis between the groups were non-significant. CONCLUSIONS The utilization of the DCB approach signifies an innovative and discretionary strategy for managing isolated ostial lesions in the LAD or LCx. Nevertheless, a future randomized trial investigating the feasibility and safety of DCB compared to the DES-only strategy specifically for de novo ostial lesions in the LAD or LCx is highly warranted.

Objective To design a modularization-based ultrasound biomicroscopy to solve the problems of the existing ultra-sound biomicroscopy in large size,display terminal and scanning probe manipulation inflexibility.Methods The modulariza-tion-based ultrasound biomicroscopy was composed of an acquisition module and an upper computer module.The acquisition module was made up of a scanning probe module,a host module and a power adapter module,in which the scan-ning probe module adopted a small-angle sector scanning scheme and consisted of an ultrasonic transducer,a preamplification circuit and a motor drive device,the host module included a field programmable gate array(FPGA)control unit,an ultrasonic emission circuit,a motor drive circuit,a gain adjustment circuit,a postamplification circuit and a USB communication interface.The upper computer module was compatible with Android and Windows platforms,which had the program developed with Java language and Eclipse(V4.5)platform for Android platform and Microsoft Visual Studio 2015 and MFC platform for Windows platform.Results The ultrasound biomicroscopy developed had the lateral and axial resolutions reaching 50 μm and could display skin and eye images clearly.Conclusion The ultrasound biomicroscopy developed behaves well in performance,portability and manipulation inflexibility,and thus can be used for clinical high-definition image acquisition.[Chinese Medical Equipment Journal,2023,44(9):19-23]