Organoid-on-a-chip technology represents a promising interdisciplinary advancement that merges two cutting-edge biomedical platforms: stem cell-derived organoids and microfluidics-based organ-on-a-chip systems. Organoids are self-organizing three-dimensional (3D) cell cultures that mimic the key structural and functional features of in vivo organs. However, traditional organoid culture systems are often static, lacking dynamic environmental cues and suffering from limitations such as batch-to-batch variability, low stability, and low throughput. Organ-on-a-chip platforms, by contrast, utilize microfluidic technologies to simulate the dynamic physiological microenvironment of human tissues and organs, enabling more controlled cell growth and differentiation. By integrating the advantages of organoids and organ-on-a-chip technologies, organoid-on-a-chip systems transcend the limitations of conventional 3D culture models, offering a more physiologically relevant and controllable in vitro platform. In organoid-on-a-chip systems, stem cells or pre-formed organoids are cultured in micro-engineered environments that mimic in vivo conditions, enabling precise control over fluid flow, mechanical forces, and biochemical cues. Specifically, these platforms employ advanced strategies including bio-inspired 3D scaffolds for structural support, precise spatial cell patterning via 3D bioprinting, and integrated biosensors for real-time monitoring of metabolic activities. These synergistic elements recreate complex extracellular matrix signals and ensure high structural fidelity. Based on structural complexity, organoid-on-a-chip systems are classified into single-organoid and multi-organoid types, forming a trajectory from unit biomimicry to systemic simulation. Single-organoid chips focus on highly biomimetic units by integrating vascular, immune, or neural functions. Multi-organoid chips simulate inter-organ crosstalk and systemic homeostasis, advancing complex disease modeling and PK/PD evaluation. This emerging technology has demonstrated broad application potential in multiple fields of biomedicine. Organoid-on-a-chip systems can recapitulate organ developmentin vitro, facilitating research in developmental biology. They mimic organ-specific physiological activities and mechanisms, showing promising applications in regenerative medicine for tissue repair or replacement. In disease modeling, they support the reconstruction of models for neurodegenerative, inflammatory, infectious, metabolic diseases, and cancers. These platforms also enable in vitro drug testing and pharmacokinetic studies (ADME). Patient-derived chips preserve genetic and pathological features, offering potential for precision medicine. Additionally, they reduce species differences in toxicology, providing human-relevant data for environmental, food, cosmetic, and drug safety assessments. Despite progress, organoid-on-a-chip systems face challenges in dynamic simulation, extracellular matrix (ECM) variability, and limited real-time 3D imaging, requiring improved materials and the integration of developmental signals. Current bottlenecks also include the high technical threshold for automation and the lack of standardized validation frameworks for regulatory adoption. Meanwhile, the concept of a “human-on-a-chip” has been proposed to mimic whole-body physiology by integrating multiple organoid modules. This approach enables systemic modeling of drug responses and toxicity, with the potential to reduce animal testing and revolutionize drug development. Future advancements in bio-responsive hydrogels and flexible biosensors will further empower these platforms to bridge the gap between bench-side research and personalized clinical interventions. In conclusion, organoid-on-a-chip technology offers a transformative in vitro model that closely recapitulates the complexity of human tissues and organ systems. It provides an unprecedented platform for advancing biomedical research, clinical translation, and pharmaceutical innovation. Continued development in biomaterials, microengineering, and analytical technologies will be essential to unlocking the full potential of this powerful tool.

Organoid-on-a-chip technology represents a promising interdisciplinary advancement that merges two cutting-edge biomedical platforms: stem cell-derived organoids and microfluidics-based organ-on-a-chip systems. Organoids are self-organizing three-dimensional (3D) cell cultures that mimic the key structural and functional features of in vivo organs. However, traditional organoid culture systems are often static, lacking dynamic environmental cues and suffering from limitations such as batch-to-batch variability, low stability, and low throughput. Organ-on-a-chip platforms, by contrast, utilize microfluidic technologies to simulate the dynamic physiological microenvironment of human tissues and organs, enabling more controlled cell growth and differentiation. By integrating the advantages of organoids and organ-on-a-chip technologies, organoid-on-a-chip systems transcend the limitations of conventional 3D culture models, offering a more physiologically relevant and controllable in vitro platform. In organoid-on-a-chip systems, stem cells or pre-formed organoids are cultured in micro-engineered environments that mimic in vivo conditions, enabling precise control over fluid flow, mechanical forces, and biochemical cues. Specifically, these platforms employ advanced strategies including bio-inspired 3D scaffolds for structural support, precise spatial cell patterning via 3D bioprinting, and integrated biosensors for real-time monitoring of metabolic activities. These synergistic elements recreate complex extracellular matrix signals and ensure high structural fidelity. Based on structural complexity, organoid-on-a-chip systems are classified into single-organoid and multi-organoid types, forming a trajectory from unit biomimicry to systemic simulation. Single-organoid chips focus on highly biomimetic units by integrating vascular, immune, or neural functions. Multi-organoid chips simulate inter-organ crosstalk and systemic homeostasis, advancing complex disease modeling and PK/PD evaluation. This emerging technology has demonstrated broad application potential in multiple fields of biomedicine. Organoid-on-a-chip systems can recapitulate organ developmentin vitro, facilitating research in developmental biology. They mimic organ-specific physiological activities and mechanisms, showing promising applications in regenerative medicine for tissue repair or replacement. In disease modeling, they support the reconstruction of models for neurodegenerative, inflammatory, infectious, metabolic diseases, and cancers. These platforms also enable in vitro drug testing and pharmacokinetic studies (ADME). Patient-derived chips preserve genetic and pathological features, offering potential for precision medicine. Additionally, they reduce species differences in toxicology, providing human-relevant data for environmental, food, cosmetic, and drug safety assessments. Despite progress, organoid-on-a-chip systems face challenges in dynamic simulation, extracellular matrix (ECM) variability, and limited real-time 3D imaging, requiring improved materials and the integration of developmental signals. Current bottlenecks also include the high technical threshold for automation and the lack of standardized validation frameworks for regulatory adoption. Meanwhile, the concept of a “human-on-a-chip” has been proposed to mimic whole-body physiology by integrating multiple organoid modules. This approach enables systemic modeling of drug responses and toxicity, with the potential to reduce animal testing and revolutionize drug development. Future advancements in bio-responsive hydrogels and flexible biosensors will further empower these platforms to bridge the gap between bench-side research and personalized clinical interventions. In conclusion, organoid-on-a-chip technology offers a transformative in vitro model that closely recapitulates the complexity of human tissues and organ systems. It provides an unprecedented platform for advancing biomedical research, clinical translation, and pharmaceutical innovation. Continued development in biomaterials, microengineering, and analytical technologies will be essential to unlocking the full potential of this powerful tool.

ObjectiveTo establish a model that can quickly identify the aroma components in different parts of Nardostachys jatamansi， so as to provide a quality control basis for the market circulation and clinical use of N. jatamansi. MethodsHeadspace solid-phase microextraction-gas chromatography-mass spectrometry（HS-SPME-GC-MS） combined with Smart aroma database and National Institute of Standards and Technology（NIST） database were used to characterize the aroma components in different parts of N. jatamansi， and the aroma components were quantified according to relative response factor（RRF） and three internal standards， and the markers of aroma differences in different parts of N. jatamansi were identified by orthogonal partial least squares-discriminant analysis（OPLS-DA） and cluster thermal analysis based on variable importance in the projection（VIP） value >1 and P<0.01. The odor data of different parts of N. jatamansi were collected by Heracles Ⅱ Neo ultra-fast gas phase electronic nose， and the correlation between compound types of aroma components collected by the ultra-fast gas phase electronic nose and the detection results of HS-SPME-GC-MS was investigated by drawing odor fingerprints and odor response radargrams. Chromatographic peak information with distinguishing ability≥0.700 and peak area≥200 was selected as sensor data， and the rapid identification model of different parts of N. jatamansi was established by principal component analysis（PCA）， discriminant factor alysis（DFA）， soft independent modeling of class analogies（SIMCA） and statistical quality control analysis（SQCA）. ResultsThe HS-SPME-GC-MS results showed that there were 28 common components in the underground and aboveground parts of N. jatamansi， of which 22 could be quantified and 12 significantly different components were screened out. Among these 12 components， the contents of five components（ethyl isovalerate， 2-pentylfuran， benzyl alcohol， nonanal and glacial acetic acid，） in the aboveground part of N. jatamansi were significantly higher than those in the underground part（P<0.01）， the contents of β-ionone， patchouli alcohol， α-caryophyllene， linalyl butyrate， valencene， 1，8-cineole and p-cymene in the underground part of N. jatamansi were significantly higher than those in the aboveground part（P<0.01）. Heracles Ⅱ Neo electronic nose results showed that the PCA discrimination index of the underground and aboveground parts of N. jatamansi was 82， and the contribution rates of the principal component factors were 99.94% and 99.89% when 2 and 3 principal components were extracted， respectively. The contribution rate of the discriminant factor 1 of the DFA model constructed on the basis of PCA was 100%， the validation score of the SIMCA model for discrimination of the two parts was 99， and SQCA could clearly distinguish different parts of N. jatamansi. ConclusionHS-SPME-GC-MS can clarify the differential markers of underground and aboveground parts of N. jatamansi. The four analytical models provided by Heracles Ⅱ Neo electronic nose（PCA， DFA， SIMCA and SQCA） can realize the rapid identification of different parts of N. jatamansi. Combining the two results， it is speculated that terpenes and carboxylic acids may be the main factors contributing to the difference in aroma between the underground and aboveground parts of N. jatamansi.

As a new generation of time-of-flight mass spectrometry,multiple-reflection time-of-flight mass spectrometry(MR-TOF-MS)has been increasingly applied in the fields such as nuclear physics,chemistry,and biology due to its ultra-high resolution and rapid analysis capabilities.However,the analytical performance of MR-TOF-MS largely depends on the ion bunch state entering the mass analyzer.In this study,a rectangular ion trap(RIT)was developed,designed and processed using printed circuit board technology,as an ion accumulating and focusing device for MR-TOF mass analyzer.Compared to traditional ion traps composed of two sets of planar electrodes,this RIT had higher voltage utilization efficiency,resulting in more efficient ion collection and focusing.The ions were cooled to a sufficiently small bunch for precise mass measurement with MR-TOF-MS mass spectrometry in only 1 ms of cooling time in the RIT,then orthogonally ejected to the MR-TOF mass spectrometer for mass analysis.Experimental results indicated that the working cycle,ion flux,and ion focusing state of the RIT fully met the requirements of the MR-TOF mass analyzer.When coupled with the MR-TOF mass analyzer,the RIT enabled MR-TOF-MS to achieve a mass resolution of 1.5×105.

The continuous accumulation of plastic waste such as polyethylene in the environment has caused serious environmental pollution issues.Considering the high similarity in the molecular structure of petroleum and polyolefin,it is feasible to apply rare earth-zeolite catalysts in polyolefin plastic upcycling,which is commonly used in fluid catalytic cracking(FCC)in the field of petroleum refining.In this study,Ce-modified HY(Ce-HY)zeolites were synthesized and characterized by a series of analytical methods,such as high-angle annular dark-field scanning transmission electron microscopy(HAADF-STEM),Fourier infrared spectroscopy(FT-IR),X-ray photoelectron spectroscopy(XPS),etc.When introducing 5% Ce species into HY zeolites,the 5Ce-HY showed excellent catalytic performance in the catalytic cracking of low-density polyethylene(LDPE),which achieved 98.4% LDPE conversion with 91.5% selectivity of gaseous alkanes at 300℃,and 75.4% of them were isoparaffins.In addition,the effect of the location of rare earth species in Y zeolites on the catalytic performance was explored by fine X-ray diffraction(XRD)in the range of 11°-13°and in situ-Raman analyses.The Ce species located in the supercage of Y zeolites were more important,which enhanced the adsorption capacity and accessibility of substrate molecules,thus facilitating the entire catalytic cracking process.This method could be used to detect the location of rare earth elements in Y zeolites to understand the mechanism of rare earth catalysis.

Decabromodiphenyl ether(BDE-209)and decabromodiphenyl ethane(DBDPE)are widely used brominated flame retardants,which have been detected in the atmosphere,water,soil,and various organisms.In this study,a method based on high-performance liquid chromatography-inductively coupled plasma-mass spectrometry(HPLC-ICP-MS)was developed for determination of BDE-209 and DBDPE in sediment.Firstly,the target compounds in the sediments were extracted by accelerated solvent extraction(ASE),and the extraction solvent was hexane/dichloromethane(1∶1,V/V).The extract was concentrated by rotary evaporation and purified by a composite silica gel column(6 g neutral silica gel,8 g acidic silica gel,and 4 g anhydrous sodium sulfate),concentrated by nitrogen blowing,and then re-dissolved with 1 mL of toluene for instrumental determination.The chromatographic separation was carried out on a TC-C18(2)column(250 mm×4.6 mm)with isocratic elution using methanol-isopropanol-water(89∶6∶5,V/V)as the mobile phase,and the samples were separated within 20 min.Further,the Br element was quantified by ICP-MS to realize the detection of the target.The results showed that the method established in this study exhibited good linearity(R2>0.999)in the range of 100-10000 ng/mL,and the limits of quantification(LOQs)of the method were 2.0 ng/g for BDE-209 and 10.0 ng/g for DBDPE,with the relative standard deviations(RSDs,n=3)lower than 10%,and the recoveries were in the acceptable range(80.9%-120.7%).The matrix effect was effectively controlled within 10%.In addition,by analyzing the actual sediment samples from Guangxi,a background point,and Taizhou,Zhejiang,a typical contaminated area,it was found that neither BDE-209 nor DBDPE was detected in the sediment from Guangxi,while the concentrations of BDE-209 and DBDPE in the sediment from Zhejiang ranged from 1591.8 to 3362.9 ng/g,which further demonstrated the applicability and reliability of the method for analyzing actual environmental samples.This study provided a strong technical support for the accurate detection of POPs in the environment.

The faithful segregation of genetic material to daughter cells is a fundamental biological process and a prerequisite for autonomous construction of robustly self-replicating artificial cells.Artificial cells are mimic cell structures with part or whole functions of normal cells.The complexity of eukaryotic chromosome segregation machinery has limited its applications in the field of synthetic biology.In contrast,the plasmid segregation machineries employed by prokaryotes are relatively simple and can provide valuable approaches for the bottom-up construction of complex artificial cells.This review aimed to comprehensively analyze the origin species and working mechanism of three bacterial plasmid segregation systems,namely ParABS,ParMRC,and TubZRC systems.The current researches on plasmid segregation both in bacterial and artificial cellular systems were summarized,and the future directions of this field were also proposed.

Objective:To explore the effects of Qingre Qudu Decoction for fumigation combined with three-gap drainage on wound healing and serum inflammatory factors in patients with acute perianal abscess.Methods:Randomized controlled trial was conducted. A total of 117 patients with acute perianal abscess in the hospital were enrolled as the observation objects between August 2022 and May 2024. According to random number table method, they were divided into observation group (59 cases) and control group (58 cases). Both groups received three-gap drainage therapy. On basis of three-gap drainage, control group was given potassium permanganate, while observation group was given Qingre Qudu Decoction for fumigation. All patients were treated for 14 d. The growth of granulation tissue and wound secretions before and after treatment was evaluated. VAS scale was used to evaluate the degree of incision pain, and Wexner score was used to assess incontinence; ELISA was used to detect serum activator A (ACTA), immunoturbidimetry was used to detect serum CRP, and radioimmunoassay was used to detect serum IL-6 levels. The occurrence of complications and abscess recurrence during treatment was recorded, and clinical efficacy was evaluated.Results:The total effective rate of the observation group was 96.61% (57/59), while that of the control group was 82.76% (48/58), with statistical significance ( χ2=6.10, P=0.014). After treatment, scores of granulation tissue growth and wound secretions in observation group, and scores of VAS and Wexner incontinence in observation group were lower than those in the control group ( t=9.66, 5.00, 7.98, 3.65, P<0.001), and wound healing time was shorter than that in control group ( t=8.41, P<0.001). After treatment, levels of serum ACTA, CRP and IL-6 in observation group were lower than those in control group ( t=15.30, 2.08, 19.34, P<0.01 or P<0.05). The incidence of postoperative complications in the observation group was 6.78% (4/59), while in the control group it was 27.59% (16/58), with statistical significance ( χ2=8.93, P=0.003). Conclusion:Qingre Qudu Decoction for fumigation combined with three-gap drainage can relieve postoperative incision pain, inhibit inflammatory response, accelerate the recovery of wound and promote the recovery of anal function and improve clinical efficacy.

Objective:To study the effects of Qingre Lishi Prescription on ATP-P2X7R-IL-1β signaling pathway in rats with acute gouty arthritis.Methods:Otally 60 SPF-grade SD rats were divided into normal group, model group, colchicine group, and Qingre Lishi Prescription low-, medium- and high-dosage groups according to random number table method; the normal group and model group were given distilled water at a dosage of 10 ml/kg by gavage, the colchicine group was given colchicine solution at a dosage of 0.6 mg/kg by gavage, and Qingre Lishi Prescription low-, medium- and high-dosage groups were given Qingre Lishi Prescription extract suspension at dosages of 11.76, 23.52, and 47.04 g/kg by gavage, once a day for 7 consecutive days. Except for the normal group, AGA models were prepared by gavage on the 4th day in all other groups, and the swelling index of the right posterior ankle joint of rats was measured at 6, 12, 24, 48, and 72 hours after modeling; after 7 days of administration, samples were taken and HE staining was used to observe the pathological changes in the synovial tissue of the right posterior ankle joint. ELISA was used to detect the levels of serum ATP, IL-1 β, IL-8, and IL-37, and immunohistochemistry was used to detect the positive rates of P2X7R and IL-1 β proteins in the synovial tissue of the right posterior ankle joint.Results:At 6, 12, 24, 48, and 72 hours after modeling, compared with the model group, the swelling index of the colchicine group and Qingre Lishi Prescription low-dosage group decreased ( P<0.01); the levels of serum ATP, IL - β, IL-8, and IL-37 decreased in the colchicine group and Qingre Lishi Prescription low-, medium-, and high-dosage groups ( P<0.01); the expressions of P2X7R and IL-1 β proteins in the synovial tissue of the right posterior ankle was reduced in the colchicine group and Qingre Lishi Prescription high-dosage group ( P<0.05). Conclusion:Qingre Lishi Prescription may improve joint swelling and alleviate synovial tissue inflammation in AGA model rats through ATP/P2X7R/IL-1β-mediated inflammatory factor pathway.

Background/Aims: Metabolic dysfunction-associated steatohepatitis (MASH) is a significant risk factor for gallstone formation, but mechanisms underlying MASH-related gallstone formation remain unclear. Golgi membrane protein 1 (GOLM1) participates in hepatic cholesterol metabolism and is upregulated in MASH. Here, we aimed to explore the role of GOLM1 in MASH-related gallstone formation. Methods: The UK Biobank cohort was used for etiological analysis. GOLM1 knockout (GOLM1-/-) and wild-type (WT) mice were fed with a high-fat diet (HFD). Livers were excised for histology and immunohistochemistry analysis. Gallbladders were collected to calculate incidence of cholesterol gallstones (CGSs). Biles were collected for biliary lipid analysis. HepG2 cells were used to explore underlying mechanisms. Human liver samples were used for clinical validation. Results: MASH patients had a greater risk of cholelithiasis. All HFD-fed mice developed MASH, and the incidence of gallstones was 16.7% and 75.0% in GOLM1-/- and WT mice, respectively. GOLM1-/- decreased biliary cholesterol concentration and output. In vivo and in vitro assays confirmed that GOLM1 facilitated cholesterol efflux through upregulating ATP binding cassette transporter subfamily G member 5 (ABCG5). Mechanistically, GOLM1 translocated into nucleus to promote osteopontin (OPN) transcription, thus stimulating ABCG5-mediated cholesterol efflux. Moreover, GOLM1 was upregulated by interleukin-1β (IL-1β) in a dose-dependent manner. Finally, we confirmed that IL-1β, GOLM1, OPN, and ABCG5 were enhanced in livers of MASH patients with CGSs. Conclusions In MASH livers, upregulation of GOLM1 by IL-1β increases ABCG5-mediated cholesterol efflux in an OPN-dependent manner, promoting CGS formation. GOLM1 has the potential to be a molecular hub interconnecting MASH and CGSs.