BACKGROUND: Chronic liver disease (CLD), mainly non-alcoholic fatty liver disease (NAFLD), is a significant public health concern worldwide. This study aims to quantify the burden of NAFLD in CLD globally and within China, using data from the Global Burden of Disease (GBD) Study 2021, providing crucial insights for global and local health policies. METHODS: The study used comprehensive data from the GBD study 2021. It included estimates of prevalence, incidence, mortality, and disability-adjusted life years (DALYs). Age-standardized rates and average annual percent change (AAPC) from 2011 to 2021 were reported. A meticulous decomposition analysis was conducted. RESULTS: In 2021, there were 1582.5 million prevalent cases, 47.6 million incident cases, 1.4 million deaths, and 44.4 million DALYs attributable to CLD, globally. Among these, NAFLD has emerged as the predominant cause, accounting for 78.0% of all prevalent CLD cases (1234.7 million) and 87.2% of incident cases (41.5 million). Correspondingly, NAFLD had the highest age-standardized prevalence (15,017.5 per 100,000 population) and incidence (876.5 per 100,000 population) rates among CLDs. In addition, China's CLD age-standardized prevalence rate was 21,659.5 per 100,000 population, and the age-standardized incidence rate was 752.6 per 100,000 population, higher than the global average. From 2011 to 2021, the global prevalence rate of CLD increased slowly (AAPC = 0.17), consistent with the trend in China (AAPC = 0.23). Furthermore, the prevalence rate of NAFLD rose significantly in China (AAPC = 1.30) compared with the global average (AAPC = 0.91). Decomposition analysis also showed the worldwide increase in deaths and DALYs for NAFLD, which were primarily attributable to population growth and aging. CONCLUSIONS The burden of CLD and NAFLD remains substantial globally and within China in terms of high prevalence and incidence. As such, this underscores the need for targeted prevention and treatment strategies. These findings emphasize the importance of continued surveillance and research to mitigate the growing impact of liver diseases on global and Chinese health systems.
Humans ; Non-alcoholic Fatty Liver Disease/mortality* ; Global Burden of Disease ; China/epidemiology* ; Prevalence ; Male ; Disability-Adjusted Life Years ; Female ; Incidence ; Middle Aged ; Chronic Disease ; Adult ; Quality-Adjusted Life Years ; Liver Diseases/epidemiology* ; Aged

Osteoporosis(OP) is a senile bone disease characterized by an imbalance between bone remodeling and bone formation. Targeting pathogenesis of kidney deficiency, spleen deficiency, and blood stasis, Bushen Jianpi Huoxue Decoction has a significant effect on the treatment of OP by tonifying kidney, invigorating spleen, and activating blood circulation. MicroRNA(miRNA) and the anti-apoptotic protein B-cell lymphoma-2-like protein 1(BCL2L1) are closely related to bone cell metabolism. Therefore, in this study, the binding of miR-140-5p to BCL2L1 was detected by dual luciferase assay and polymerase chain reaction(PCR). After silencing or overexpressing miR-140-5p, the apoptosis, autophagy, and osteogenic function of human fetal osteoblast cell line 1.19(HFOB1.19) were observed by flow cytometry and Western blot. Bushen Jianpi Huoxue Decoction-containing serum was prepared by intragastric administration of Bushen Jianpi Huoxue Decoction in rats. Different concentrations of Bushen Jianpi Huoxue Decoction-containing serum were used to treat HFOB1.19 with or without miR-140-5p mimic. The expression of osteogenic proteins in each group was observed, and the role of miR-140-5p/BCL2L1 in apoptosis and autophagy of HFOB1.19 was studied, along with the effect of Bushen Jianpi Huoxue Decoction on these processes. As indicated by the dual luciferase assay, miR-140-5p bound to BCL2L1. Flow cytometry and Western blot showed that miR-140-5p promoted apoptosis and inhibited autophagy in HFOB1.19. After intervention with high, medium, and low doses of Bushen Jianpi Huoxue Decoction-medicated serum, compared with the miR-140-5p NC group, the expression of osteocalcin(OCN), osteopontin(OPN), Runt-related transcription factor 2(RUNX2), and transforming growth factor beta 1(TGF-β1) decreased in the miR-140-5p mimic group, while the expression of bone morphogenetic protein 2(BMP2) showed no significant difference under high-dose intervention. Therefore, miR-140-5p/BCL2L1 can promote apoptosis and inhibit autophagy in HFOB1.19. Bushen Jianpi Huoxue Decoction can affect the osteogenic effect of miR-140-5p through BMP2.
MicroRNAs/metabolism* ; Autophagy/drug effects* ; Apoptosis/drug effects* ; Humans ; Drugs, Chinese Herbal/administration & dosage* ; Animals ; Cell Line ; bcl-X Protein/metabolism* ; Osteoblasts/metabolism* ; Rats ; Osteoporosis/physiopathology* ; Male ; Rats, Sprague-Dawley ; Osteogenesis/drug effects*

Syringa pinnatifolia, belonging to the family Oleaceae, is a species endemic to China. It is predominantly distributed in the Helan Mountains region of Inner Mongolia and Ningxia of China. The peeled roots, stems, and thick branches have been used as a distinctive Mongolian medicinal material known as "Shan-chen-xiang", which has effects such as suppressing "khii", clearing heat, and relieving pain and is employed for the treatment of cardiovascular and pulmonary diseases and joint pain. Over the past five years, significant increase was achieved in research on chemical constituents and pharmacological effects. There were a total of 130 new constituents reported, covering sesquiterpenoids, lignans, and alkaloids. Its effects of anti-myocardial ischemia, anti-cerebral ischemia/reperfusion, sedation, and analgesia were revealed, and the mechanisms of agarwood formation were also investigated. To better understand its medical value and potential of clinical application, this review updates the research progress in recent five years focusing on the chemical constituents and pharmacological effects of S. pinnatifolia, providing reference for subsequent research on active ingredient and support for its innovative application in modern medicine system.
Medicine, Mongolian Traditional ; Humans ; Drugs, Chinese Herbal/pharmacology* ; Animals ; Syringa/chemistry*

To enhance the therapeutic efficacy of the baicalin-berberine complex(BA-BBR) in the treatment of ulcerative colitis(UC), BA-BBR nanocrystal microspheres(BA-BBR NC MS) were prepared using the dropping method. The microspheres were characterized in terms of morphology, particle size, differential scanning calorimetry(DSC), and powder X-ray diffraction(XRD). The release profiles of BA and BBR from the microspheres were measured, and the drug release mechanism was investigated. A rat model of UC was induced by 5% dextran sodium sulfate(DSS) and treated continuously for 7 days to evaluate the therapeutic effects of different formulations. The results showed that the prepared BA-BBR MS and BA-BBR NC MS were uniform gel spheres with particle sizes of(1.77±0.16) mm and(1.67±0.08) mm, respectively. After drying, the gels collapsed inward and exhibited a rough surface. During the preparation process, the BA-BBR nanocrystals(BA-BBR NC) were uniformly encapsulated within the microspheres. The release profiles of the microspheres followed a first-order kinetic model, and the 12-hour cumulative release of BA and BBR from BA-BBR NC MS was higher than that from BA-BBR MS. Compared with BA-BBR, BA-BBR NC, and BA-BBR MS, BA-BBR NC MS further alleviated UC symptoms in rats, most significantly reducing the levels of TNF-α, IL-1β, IL-6, and MPO, while increasing the level of IL-4 in colon tissues. These results indicate that BA-BBR NC MS, based on a "nano-in-micro" design, can deliver BA-BBR to the intestine and exert significant therapeutic effects in a UC rat model, suggesting it as a promising new strategy for the treatment of UC.
Animals ; Colitis, Ulcerative/metabolism* ; Rats ; Nanoparticles/chemistry* ; Microspheres ; Male ; Berberine/administration & dosage* ; Flavonoids/administration & dosage* ; Rats, Sprague-Dawley ; Drugs, Chinese Herbal/administration & dosage* ; Humans ; Particle Size ; Tumor Necrosis Factor-alpha/immunology* ; Drug Liberation ; Drug Compounding

OBJECTIVES: Recent advancements in single-cell RNA sequencing (scRNA-seq) have revolutionized the study of cellular heterogeneity, particularly within the hematological system. However, accurately annotating cell types remains challenging due to the complexity of immune cells. To address this challenge, we develop a PAN-blood single-cell Data Annotator (scPANDA), which leverages a comprehensive 10-million-cell atlas to provide precise cell type annotation. METHODS: The atlas, constructed from data collected in 16 studies, incorporated rigorous quality control, preprocessing, and integration steps to ensure a high-quality reference for annotation. scPANDA utilizes a three-layer inference approach, progressively refining cell types from broad compartments to specific clusters. Iterative clustering and harmonization processes were employed to maintain cell type purity throughout the analysis. Furthermore, the performance of scPANDA was evaluated in three external datasets. RESULTS: The atlas was structured hierarchically, consisting of 16 compartments, 54 classes, 4,‍460 low-level clusters (pd_cc_cl_tfs), and 611 high-level clusters (pmid_cts). Robust performance of the tool was demonstrated in annotating diverse immune scRNA-seq datasets, analyzing immune-tumor coexisting clusters in renal cell carcinoma, and identifying conserved cell clusters across species. CONCLUSIONS scPANDA exemplifies effective reference mapping with a large-scale atlas, enhancing the accuracy and reliability of blood cell type identification.
Humans ; Single-Cell Analysis/methods* ; Sequence Analysis, RNA/methods* ; Blood Cells

OBJECTIVE: To investigate the accuracy and safety of pedicle screw placement using 3D-printed auxiliary guides in scoliosis correction surgery for adolescents. METHODS: A retrospective analysis was conducted on the clinical data of 51 patients who underwent posterior scoliosis correction surgery from January 2020 to March 2023. Among them, there were 35 cases of adolescent idiopathic scoliosis and 16 cases of congenital scoliosis. The patients were divided into two groups based on the auxiliary tool used:the 3D-printed auxiliary guide screw placement group (3D printing group) and the free-hand screw placement group (free-hand group, without auxiliary tools). The 3D printing group included 32 patients (12 males and 20 females) with an average age of (12.59±2.60) years;the free-hand group included 19 patients (7 males and 12 females) with an average age of (14.58±3.53) years. The two groups were compared in terms of screw placement accuracy and safety, spinal correction rate, intraoperative blood loss, number of intraoperative fluoroscopies, operation time, hospital stay, and preoperative and last follow-up scores of the Scoliosis Research Society-22 (SRS-22) questionnaire. RESULTS: A total of 707 pedicle screws were placed in the two groups, with 441 screws in the 3D printing group and 266 screws in the free-hand group. All patients in both groups successfully completed the surgery. There was a statistically significant difference in operation time between the two groups (P<0.05). The screw placement accuracy rate of the 3D printing group was 95.46% (421/441), among which the Grade A placement rate was 89.34% (394/441);the screw placement accuracy rate of the free-hand group was 86.47% (230/266), with a Grade A placement rate of 73.31% (195/266). There were statistically significant differences in the accuracy of Grade A, B, and C screw placements between the two groups (P<0.05), while no statistically significant differences were observed in intraoperative blood loss, number of fluoroscopies, correction rate, or hospital stay (P>0.05). In the SRS-22 questionnaire scores, the scores of functional status and activity ability, self-image, mental status, and pain of patients in each group at the last follow-up were significantly improved compared with those before surgery (P<0.05), but there were no statistically significant differences in all scores between the two groups (P>0.05). CONCLUSION In scoliosis correction surgery, compared with traditional free-hand screw placement, the use of 3D-printed auxiliary guides for screw placement significantly improves the accuracy and safety of screw placement and shortens the operation time.
Humans ; Male ; Scoliosis/surgery* ; Female ; Adolescent ; Printing, Three-Dimensional ; Retrospective Studies ; Pedicle Screws ; Child