Objective To explore the influencing factors of acute kidney injury in severe burn patients,and to construct a visual risk nomogram model.Methods A total of 390 patients with severe burn admitted to the Institute of Burn Frostbite and Tissue Function Reconstruction of Chinese People's Armed Police Force Specialty Medical Center from January 2018 to January 2022 were collected as an internal training data set,and 50 patients with severe burn admitted from February to December 2022 were collected as an external validation data set.The 390 patients of the internal training data set were divided into the acute kidney injury group and the non-acute kidney injury group according to the occurrence of acute kidney injury,and the baseline data of patients in the two groups were compared.Univariate and multivariate Logistic regression were used to analyze the risk factors of acute kidney injury in severe burn patients of the internal training data set,and a nomogram model was drawn.Subsequently,the model was verified both internally and externally.Kaplan-Meier analysis and Log-rank test were used to compare the 90-day survival rate of patients between the acute kidney injury group and the non-acute kidney injury group.Results The burn area(OR=1.18,95%CI:1.06 to 2.36,P=0.004),sequential organ failure assessment(SOFA)score(OR=1.81,95%CI:1.21 to 5.92,P<0.001),inhalation injury(OR=3.21,95%CI:1.23 to 6.35,P<0.001),neutrophil to lymphocyte ratio(NLR)(OR=1.22,95%CI:1.05 to 3.65,P<0.001)and albumin(ALB)(OR=0.78,95%CI:0.57 to 0.92,P=0.011)were the independent risk factors for the development of acute kidney injury in severe burn patients.The nomogram model was established by the above factors.The area under the receiver operating characteristic curve(AUC)of the internal training data set was 0.833(95%CI:0.752 to 0.935),the sensitivity was 81.2%,and the specificity was 83.2%.The AUC of the external validation data set was 0.842(95%CI:0.762 to 0.912),the sensitivity 87.2%,and the specificity was 78.7%.The 90-day survival rate of patients in the acute kidney injury group after burns was significantly lower than that in the non-acute kidney injury group(P<0.001).Conclusion Larger burn area,higher SOFA score,combined inhalation injury,increased NLR,and decreased ALB level are the risk factors for the occurrence of acute kidney injury in severe burn patients,which are related to the 90-day survival rate of patients after burns.The nomogram model based on the risk factors can provide certain reference for clinical individualized prevention and treatment of acute kidney injury in severe burn patients.

Objective To explore the influencing factors of acute kidney injury in severe burn patients,and to construct a visual risk nomogram model.Methods A total of 390 patients with severe burn admitted to the Institute of Burn Frostbite and Tissue Function Reconstruction of Chinese People's Armed Police Force Specialty Medical Center from January 2018 to January 2022 were collected as an internal training data set,and 50 patients with severe burn admitted from February to December 2022 were collected as an external validation data set.The 390 patients of the internal training data set were divided into the acute kidney injury group and the non-acute kidney injury group according to the occurrence of acute kidney injury,and the baseline data of patients in the two groups were compared.Univariate and multivariate Logistic regression were used to analyze the risk factors of acute kidney injury in severe burn patients of the internal training data set,and a nomogram model was drawn.Subsequently,the model was verified both internally and externally.Kaplan-Meier analysis and Log-rank test were used to compare the 90-day survival rate of patients between the acute kidney injury group and the non-acute kidney injury group.Results The burn area(OR=1.18,95%CI:1.06 to 2.36,P=0.004),sequential organ failure assessment(SOFA)score(OR=1.81,95%CI:1.21 to 5.92,P<0.001),inhalation injury(OR=3.21,95%CI:1.23 to 6.35,P<0.001),neutrophil to lymphocyte ratio(NLR)(OR=1.22,95%CI:1.05 to 3.65,P<0.001)and albumin(ALB)(OR=0.78,95%CI:0.57 to 0.92,P=0.011)were the independent risk factors for the development of acute kidney injury in severe burn patients.The nomogram model was established by the above factors.The area under the receiver operating characteristic curve(AUC)of the internal training data set was 0.833(95%CI:0.752 to 0.935),the sensitivity was 81.2%,and the specificity was 83.2%.The AUC of the external validation data set was 0.842(95%CI:0.762 to 0.912),the sensitivity 87.2%,and the specificity was 78.7%.The 90-day survival rate of patients in the acute kidney injury group after burns was significantly lower than that in the non-acute kidney injury group(P<0.001).Conclusion Larger burn area,higher SOFA score,combined inhalation injury,increased NLR,and decreased ALB level are the risk factors for the occurrence of acute kidney injury in severe burn patients,which are related to the 90-day survival rate of patients after burns.The nomogram model based on the risk factors can provide certain reference for clinical individualized prevention and treatment of acute kidney injury in severe burn patients.

Objective:To analyze the influence of forming direction on the surface characteristics,elastic modulus,bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction,and to provide scientific basis and guidance for the clinical applica-tion of oral denture base resin materials.Methods:The 3D printing technology was used to print denture base resin samples.The shape and size of the samples referred to the current standard for testing conven-tional denture base materials.The samples used for physical performance testing were cylindrical(with a diameter of 15 mm and a thickness of 1 mm)and printed at different angles along the Z axis(0°,45°,90°).Scanning electron microscope was used to observe the microscopic topography of the different sam-ples.The color stability of different samples was observed by color stabilizer.The surface roughness of the samples was analyzed by using surface roughness tester.The Vickers hardness was measured to ana-lyze the hardness of the samples.The samples used for mechanical performance testing were rectangular(elastic modulus and bending strength:A length of 64 mm,a width of 10 mm,and a height of 3.3 mm;fracture toughness:A length of 39 mm,a width of 8 mm,and a height of 4 mm),divided into two groups:W group and H group.The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X,Y axis plane,while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X,Y axis plane.The forming angles of both groups were equally divided into 0°,45°,and 90°.The elastic modulus,bending strength and fracture toughness of different samples were studied through universal mechanical testing machine.SPSS 22.0 software was used for statistical analysis.Results:The microscopic topogra-phy and roughness of different samples were closely related to the printing direction,with significant differences between the 0°,45°,and 90° specimens.The 0° specimens had the smoothest surface(roughness＜1 μm).The surface of the 45 ° specimen was the roughest(roughness＞3 μm).The microhardness of the 0° sample was the best[(196.13±0.20)MPa],with a significant difference com-pared with the 90° sample[(186.62±4.81)MPa,P＜0.05].The mechanical properties of different samples were also closely related to the printing direction.The elastic modulus,bending strength,and fracture toughness of the 45° samples in the W group were the highest compared with the other groups.The results of elastic modulus showed that in the H group,the 45° specimens had the highest elastic mo-dulus,which was significantly different from the 0° and 90° specimens(P＜0.05).The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens(P＜0.05).The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group.The bending strength of the 90° specimens in the W group was the smallest,and there was a significant difference between 90° and the 0° and 45° specimens(P＜0.05);And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group(P＜0.05).The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2,which was specified in the denture base standard.The 45° samples in the W group were the highest,with significant differences compared with the 0° and 90° samples(P＜0.05).And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2.And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group(P＜0.05).Conclusion:The 0° samples had rela-tively better physical properties.The 45° samples had the best mechanical properties.But the fracture toughness of specimens(H group and 90° samples of W group)did not yet meet clinical requirements.That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction.Only when the performance of the printed samples in all directions met the minimum require-ments of the standard,they could be used in clinical practice.

AIM To establish a UPLC-MS/MS method for the simultaneous content determination of liquiritin apioside,alibiflorin,swertiamarin,methyl gallate,benzoylpaeoniflorin,sweroside,6′-O-β-D-glucosylgentiopicroside,isoliquiritigenin,loganic acid,liquiritigenin,gallic acid,paeoniflorin,oxypaeoniflorin,gentiopicroside,glycyrrhizic acid,isoliquiritoside and liquiritin in Yangxue Ruanjian Capsules.METHODS The analysis was performed on a 40℃thermostatic Waters BEH C18column(2.1 mm×100 mm,1.7 μm),with the mobile phase comprising of 2 mmol/L ammonium acetate(containing 0.1%formic acid)-acetonitrile flowing at 0.3 mL/min in a gradient elution manner,and electron spray ionization source was adopted in negative ion scanning with multiple reaction monitoring mode.RESULTS Seventeen constituents showed good linear relationships within their own ranges(r>0.999 6),whose average recoveries were 91.33%-104.03%with the RSDs of 1.58%-3.50%.CONCLUSION This rapid,accurate and stable method can be used for the quality control of Yangxue Ruanjian Capsules.

Objective To design a portable intelligent cleaner for medical lumen instruments to enhance cleaning efficiency.Methods The portable intelligent cleaner had a box-body shape and a shell made of 304 stainless steel,which was composed of a circuit control board,a micro pump,lithium batteries,a charging interface,a rinse tube and connectors.The circuit control board used a STM32G030C8T6 integraged circuit,which was equipped with a countdown digital tube to display the time left for cleaning;the micro pump and lithium batteries were placed at the inner wall of the box bottom,the charging interface and water inlet/outlet inteface were put on the outside of the front wall of the box bottom,the water inlet/outlet interface was connected with a silicon rinse tube linked to an adapter at its distal end,and the adapters with different calibers were compatible with sizes of medical lumen instruments.Totally 9 672 pieces of lumen instruments received by some hospital's disinfection supply center from May to October 2021 were divided into 2 groups with the convenience sampling method,with 4 836 pieces in each group.The odd-numbered instruments were enrolled into a control group and cleaned with an ultrasonic cleaner and a lumen brush,and the even-numbered instruments were included into an experimental group and cleaned conventionally after pretreatment by the intelligent cleaner.The two groups were compared in terms of eaning efficiency and satisfaction.Results Testing by visual inspection,magnifying glass with light source and white stripe method showed that the experimental group behaved better than the control group in the cleaning qualification rate,whose satisfaction rate(100％)was also higher than that of the control group(86.53％),with all the differences being statistically significant(P＜0.05).Conclusion The portable cleaner with easy operation enhances the cleaning quality and efficiency for medical lumen instruments.[Chinese Medical Equipment Journal,2024,45(10):114-117]

Dolomiaea plants are perennial herbs in the Asteraceae family with a long medicinal history. They are rich in chemical constituents, mainly including sesquiterpenes, phenylpropanoids, triterpenes, and steroids. The extracts and chemical constituents of Dolomiaea plants have various pharmacological effects, such as anti-inflammatory, antibacterial, antitumor, anti-gastric ulcer, hepatoprotective and choleretic effects. However, there are few reports on Dolomiaea plants. This study systematically reviewed the research progress on the chemical constituents and pharmacological effects of Dolomiaea plants to provide references for the further development and research of Dolomiaea plants.
Plant Extracts/pharmacology* ; Asteraceae ; Triterpenes ; Sesquiterpenes/pharmacology* ; Anti-Inflammatory Agents ; Phytochemicals/pharmacology*

Objective To explore the risk factors for intracranial infection in patients after neurosurgery,con-struct and validate a Nomogram prediction model.Methods Data of 978 patients who underwent neurosurgery in a hospital in Nanjing from January 1,2019 to December 31,2022 were retrospectively analyzed.Independent risk fac-tors were screened through logistic univariate and multivariate analyses.Modeling variables were screened through Lasso regression.A Nomogram model was constructed and internally validated by logistic regression.Effectiveness of the model was evaluated with receiver operating characteristic(ROC)curve,calibration curve and decision curve.Results Among 978 patients underwent neurosurgery,293 had postoperative intracranial infection,with an inci-dence of healthcare-associated infection of 29.96％.There was no significant difference in age,gender,proportion of coronary heart disease,cerebral infarction,diabetes and hypertension between the infected group and the non-in-fected group(all P＞0.05).Multivariate logistic analysis showed that postoperative intracranial hypertension,fe-ver,increased neutrophil percentage in blood routine examination,turbid cerebrospinal fluid,positive Pan's test,decreased glucose concentration,abnormal ratio of cerebrospinal fluid/serum glucose,positive microbial culture,absence of indwelling external ventricular drainage tubes,presence of indwelling lumbar cistern drainage tubes,use of immunosuppressive agents,and long duration of surgery were independent risk factors for postoperative intracra-nial infection in patients who underwent neurosurgery(all P＜0.05).Fifteen variables were screened out through Lasso regression.Fourteen variables were finally included for modeling after collinear screening,missing data impu-tation(random forest method)and checking pairwise interaction items.A Nomogram prediction model was con-structed,with the area under ROC curve,sensitivity,specificity,and accuracy of 0.885,0.578,0.896,and 0.704,respectively.Internal validation of the model was conducted.The modeling and validation groups presented similar effects.The calibration curve and decision curve also indicated that the model had good predictive efficacy.Conclusion The constructed Nomogram prediction model for postoperative intracranial infection after neurosurgery is scientific,and the prediction indicators are easy to obtain.The model presents with high stability,reliability,and application value,thus can provide reference for the assessment of postoperative intracranial infection after neuro-surgery.

The latest guideline about ulcerative colitis (UC) clinical practice stresses that mucosal healing, rather than anti-inflammation, is the main target in UC clinical management. Current mucosal dysfunction mainly closely relates to the endoscopic intestinal wall (mechanical barrier) injury with the imbalance between intestinal epithelial cells (IECs) regeneration and death, as well as tight junction (TJ) dysfunction. It is suggested that biological barrier (gut microbiota), chemical barrier (mucus protein layer, MUC) and immune barrier (immune cells) all take part in the imbalance, leading to mechanical barrier injury. Lots of experimental studies reported that acupuncture and moxibustion on UC recovery by adjusting the gut microbiota, MUC and immune cells on multiple targets and pathways, which contributes to the balance of IEC regeneration and death, as well as TJ structure recovery in animals. Moreover, the validity and superiority of acupuncture and moxibustion were also demonstrated in clinic. This study aims to review the achievements of acupuncture and moxibustion on mucosal healing and analyse the underlying mechanisms.
Rats ; Animals ; Colitis, Ulcerative/metabolism* ; Moxibustion ; Rats, Sprague-Dawley ; Acupuncture Therapy ; Acupuncture

Objective: To characterize the incidence density of systematic lupus erythematosus (SLE) in Yinzhou District of Ningbo from 2016 to 2021, and compare the age and gender specific differences. Methods: A retrospective cohort study was conducted based on the related data from 2015 to 2021 collected from the Health Information Platform of Yinzhou. Suspected SLE cases in local residents were identified by fuzzy matching of International Classification of Diseases 10^th edition code "M32" or Chinese text "lupus". The classification criteria from Systemic Lupus International Collaboration Clinics-2012 and The European League Against Rheumatism/American College of Rheumatology-2019 were used for case verification. SLE cases were identified with specific algorithm based on verification results, and new cases were identified with 1 year as the washout period. The incidence density and 95%CI were estimated by Poisson distribution. Results: From 2016 to 2021, a total of 1 551 921 permanent residents were registered in Yinzhou, in whom 51.52% were women. The M(Q₁,Q₃) age at enrollment was 40.38 (27.54, 53.54) years. The M(Q₁,Q₃) of follow-up person-years was 3.83 (0.41, 5.83) years. There were 451 new SLE cases, in which 352 were women (78.05%). The 6-year incidence density was 8.14/100 000 person-years (95%CI: 7.41/100 000 person-years-8.93/100 000 person-years) for the total population, 3.68/100 000 person-years (95%CI: 2.99/100 000 person-years-4.48/100 000 person-years) for men and 12.37/100 000 person-years (95%CI: 11.11/100 000 person-years- 13.73/100 000 person-years) for women. The incidence density in men appeared a small peak at 20-29 years old, and began to increase with age from 40 years old. The incidence density in women was highest in age group 20-29 years (16.57/100 000 person-years) and remained to be high until 30-79 years old. The incidence density of SLE in Yinzhou show no significant temporal trend from 2016 to 2021 (men: P=0.848; women: P=1.000). Conclusions: The incidence density of SLE in Yinzhou from 2016 to 2021 was similar to those of other areas in China. SLE has a high incidence in women, especially in the young and elderly, suggesting that more attention should be paid to the diagnosis and treatment of SLE in women.
Adult ; Aged ; Female ; Humans ; Male ; Middle Aged ; Young Adult ; Asian People ; Incidence ; Lupus Erythematosus, Systemic/diagnosis* ; Retrospective Studies ; China/epidemiology*

OBJECTIVE: To explore the clinical efficacy and safety of manual therapy combined with posterior percutaneous endoscopic cervical decompression(PECD) in the treatment of intractable cervical spondylotic radiculopathy. METHODS: From May 2016 to May 2018, 23 CSR patients who responded poorly to conservative treatment for at least 6 weeks underwent the combination management. Firstly, the patients received the posterior percutaneous endoscopic cervical decompression routine care for the following 4 weeks and manual therapy for another 4 weeks. A total of 23 patients were followed up, including 14 males and 9 females, the age ranged from 29 to 78 years old with an average of (50.30±12.28) years, the course of disease was 3 to 24 months with an average of (9.74±5.76) months. The lesion segment involved C_4,5 in 4 cases, C_5,6 in 13 cases, C_6,7 in 6 cases. The visual analogue scale (VAS), neck disability index (NDI), changes of cervical physiological curvature and interbody stability, adverse events were observed before and after operation. The follow-up time points were before operation, 1 day after operation and 1, 3 and 6 months after operation. RESULTS: All patients successfully completed the operation and manual treatment for 4 to 8 times. Among the 29 cases, 23 patients were followed up for more than 6 months. There was no spinal cord and nerve root injury during the treatment and follow-up. Operation time was from 80 to 120 min with a median of 90 min;intraoperative blood loss was from 35 to 80 ml with a median of 50 ml. NDI, VAS of neck, shoulder and arm each period after operation were significantly lower than those before PECD(P<0.05), while there were no significant improvement in cervical physiological curvature and target segment intervertebral space height(P>0.05);there was no significant change in interbody stability (P>0.05). After received the manual therapy, NDI significantly decreased (P<0.05), however, there was no significant difference in VAS of neck, shoulder and arm, physiological curvature of cervical spine and intervertebral space height of target segment compared with that before manual treatment (P>0.05);there was no significant change in interbody stability (P>0.05). CONCLUSION Manual therapy combined with PECD in the treatment of intractable cervical spondylotic radiculopathy can not only quickly improve the symptoms, but also alleviate the residual symptoms after PECD safely and effectively, and can not cause obvious signs of accelerated instability of cervical adjacent segments in the short term.
Cervical Vertebrae/surgery* ; Child ; Child, Preschool ; Decompression/adverse effects* ; Female ; Humans ; Male ; Musculoskeletal Manipulations ; Radiculopathy/surgery* ; Retrospective Studies ; Spondylosis/surgery* ; Treatment Outcome