In recent years, cancer treatment methods and means are becoming more and more diversified, and single treatment methods often have limited efficacy, while the synergistic effect of immunity combined with chemotherapy can inhibit tumor growth more effectively. Based on this, we constructed a sodium alginate hydrogel composite system loaded with chemotherapeutic agents and tumor vaccines (named SA-DOX-NA) with a view to the combined use of chemotherapeutic agents and tumor vaccines. Firstly, the tumor vaccine (named NA) degradable under acidic conditions was constructed by in situ polymerization using chicken ovalbumin (OVA), acrylamide (AAM) and 2-(dimethylamino) ethyl methacrylate (DMAEMA) monomer. Then a hydrogel composite system SA-DOX-NA co-loaded with chemotherapeutic drug doxorubicin (DOX) and NA was prepared using sodium alginate as a matrix. The results showed that SA-DOX-NA had good in situ gel-forming ability and formed a mesh structure that could realize the co-loading of DOX and NA as well as the slow drug release. The electron microscopy results showed that SA-DOX-NA had good in situ gel-forming ability with good internal connectivity, and the three-dimensional mesh structure could realize the co-loading of DOX and NA as well as the slow drug release. The antitumor and immunomodulatory results showed that SA-DOX-NA both effectively inhibited the growth of tumor cells and efficiently promoted the proliferation and activation of DC2.4 dendritic cells without additional adjuvant. In summary, SA-DOX-NA exerts the dual efficacy of chemotherapy and immunotherapy for tumor treatment, and has a good application prospect in local tumor treatment.

Brain-computer interface (BCI) has high application value in the field of healthcare. However, in practical clinical applications, convenience and system performance should be considered in the use of BCI. Wearable BCIs are generally with high convenience, but their performance in real-life scenario needs to be evaluated. This study proposed a wearable steady-state visual evoked potential (SSVEP)-based BCI system equipped with a small-sized electroencephalogram (EEG) collector and a high-performance training-free decoding algorithm. Ten healthy subjects participated in the test of BCI system under simplified experimental preparation. The results showed that the average classification accuracy of this BCI was 94.10% for 40 targets, and there was no significant difference compared to the dataset collected under the laboratory condition. The system achieved a maximum information transfer rate (ITR) of 115.25 bit/min with 8-channel signal and 98.49 bit/min with 4-channel signal, indicating that the 4-channel solution can be used as an option for the few-channel BCI. Overall, this wearable SSVEP-BCI can achieve good performance in real-life scenario, which helps to promote BCI technology in clinical practice.
Brain-Computer Interfaces ; Humans ; Evoked Potentials, Visual/physiology* ; Electroencephalography ; Wearable Electronic Devices ; Algorithms ; Signal Processing, Computer-Assisted ; Adult ; Male

OBJECTIVE: To evaluate the effect and safety of Chinese medicine (CM) Fuzheng Huazhuo Decoction (FHD) in treating patients with coronavirus disease 2019 (COVID-19) who persistently tested positive for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). METHODS: This retrospective cohort study was conducted at Shanghai New International Expo Center shelter hospital in China between April 1 and May 30, 2022. Patients diagnosed as COVID-19 with persistently positive SARS-CoV-2 reverse transcription-polymerase chain reaction (RT-PCR) test results for ⩾8 days after diagnosis were enrolled. Patients in the control group received conventional Western medicine (WM) treatment, while those in the FHD group received conventional WM plus FHD for at least 3 days. The primary outcome was viral clearance time. Secondary outcomes included negative conversion rate within 14 days, length of hospital stay, cycle threshold (Ct) values of the open reading frame 1ab (ORF1ab) and nucleocapsid protein (N) genes, and incidence of new-onset symptoms during hospitalization. Adverse events (AEs) that occurred during the study period were recorded. RESULTS: A total of 1,765 eligible patients were enrolled in this study (546 in the FHD group and 1,219 in the control group). Compared with the control group, patients receiving FHD treatment showed shorter viral clearance time for nucleic acids [hazard ratio (HR): 1.500, 95% confidence interval (CI): 1.353-1.664, P<0.001] and hospital stays (HR: 1.371, 95% CI: 1.238-1.519, P<0.001), and a higher negative conversion rate within 14 days (96.2% vs. 82.6%, P<0.001). The incidence of new-onset symptoms was 59.5% in the FHD group, similar to 57.8% in the control group (P>0.05). The Ct values of ORF1ab and N genes increased more rapidly over time in the FHD group than those in the control group post-randomization (ORF1ab gene: β =0.436±0.053, P<0.001; N gene: β =0.415 ±0.053, P<0.001). The incidence of AEs in the FHD group was lower than that in the control group (24.2% vs. 35.4%, P<0.001). No serious AEs were observed. CONCLUSION FHD was effective and safe for patients with persistently positive SARS-CoV-2 PCR tests. (Registration No. ChiCTR2200063956).
Humans ; Drugs, Chinese Herbal/adverse effects* ; Retrospective Studies ; Male ; Female ; Middle Aged ; COVID-19 Drug Treatment ; SARS-CoV-2/drug effects* ; COVID-19/virology* ; Adult ; Aged ; Treatment Outcome

Traditional Chinese medicine (TCM) is a well-accepted therapy for atopic dermatitis (AD). However, there are currently no evidence-based guidelines integrating TCM and Western medicine for the treatment of AD, limiting the clinical application of such combined approaches. Therefore, the China Association of Chinese Medicine initiated the development of the current guideline, focusing on key issues related to the use of TCM in the treatment of AD. This guideline was developed in accordance with the principles of the guideline formulation manual published by the World Health Organization. A comprehensive review of the literature on the combined use of TCM and Western medicine to treat AD was conducted. The findings were extensively discussed by experts in dermatology and pharmacy with expertise in both TCM and Western medicine. This guideline comprises 23 recommendations across seven major areas, including TCM syndrome differentiation and classification of AD, principles and application scenarios of TCM combined with Western medicine for treating AD, outcome indicators for evaluating clinical efficacy of AD treatment, integration of TCM pattern classification and Western medicine across disease stages, daily management of AD, the use of internal TCM therapies and proprietary Chinese medicines, and TCM external treatments. Please cite this article as: Du XR, Wu MY, Tao MC, Lin Y, Gu CY, Wu MF, Cao Y, Chen DC, Li W, Wang HW, Wang Y, Wang Y, Lu HZ, Liu X, Su XF, Li FL. Clinical practice guidelines for the diagnosis and treatment of atopic dermatitis with integrative traditional Chinese and Western medicine. J Integr Med. 2025; 23(6):641-653.
Dermatitis, Atopic/drug therapy* ; Humans ; Medicine, Chinese Traditional/methods* ; Integrative Medicine ; Drugs, Chinese Herbal/therapeutic use* ; Practice Guidelines as Topic

OBJECTIVE: The relationship between fish consumption and stroke is inconsistent, and it is uncertain whether this association varies across predicted stroke risks. METHODS: A cohort study comprising 95,800 participants from the Prediction for Atherosclerotic Cardiovascular Disease Risk in China project was conducted. A standardized questionnaire was used to collect data on fish consumption. Participants were stratified into low- and moderate-to-high-risk categories based on their 10-year stroke risk prediction scores. Hazard ratios ( HRs) and 95% confidence intervals ( CIs) were estimated using Cox proportional hazard models and additive interaction by relative excess risk due to interaction (RERI), attributable proportion (AP), and synergy index (SI). RESULTS: During 703,869 person-years of follow-up, 2,773 incident stroke events were identified. Higher fish consumption was associated with a lower risk of stroke, particularly among moderate-to-high-risk individuals ( HR = 0.53, 95% CI: 0.47-0.60) than among low-risk individuals ( HR = 0.64, 95% CI: 0.49-0.85). A significant additive interaction between fish consumption and predicted stroke risk was observed (RERI = 4.08, 95% CI: 2.80-5.36; SI = 1.64, 95% CI: 1.42-1.89; AP = 0.36, 95% CI: 0.28-0.43). CONCLUSION Higher fish consumption was associated with a lower risk of stroke, and this beneficial association was more pronounced in individuals with moderate-to-high stroke risk.
Humans ; China/epidemiology* ; Male ; Female ; Stroke/etiology* ; Middle Aged ; Prospective Studies ; Incidence ; Aged ; Animals ; Fishes ; Risk Factors ; Diet ; Seafood ; Adult ; Cohort Studies

Objective To explore the toxicity of Polygonum multiflorum alcohol extract on 3D hepatospheres.Methods Variations in culture conditions and cell ratios were implemented,followed by the assessment of cell sphere diameter,density,and roundness,aiming to explore the optimal culture conditions.The 3D hepatocyte spheres were divided into control group and experimental-L,-M,-H groups.The experimental-L,-M,-H groups were treated with 0.25,1.00 and 2.50 mg·mL-1 Polygounm multiforum alcohol extract,and the control group was given the same amount of culture medium.The cell viability of the cell spheroids was tested by CellTiter-Glo reagent,the expression level of liver function related genes was detected by fluorescent quantitative polymerase chain reaction(RT-qRCR).The toxicity of cell spheres was detected by double fluorescent staining of living and dead cells.Results The ideal culture condition of cell sphere was 500 cells per micropore,and the cell ratio was HepG2-Huvec-LX-2=8∶1∶1.It displayed the values of 0.91±0.07 for circularity,0.91±0.02 for firmness,1.12±0.14 for aspect ratio,and(170.97±14.79)μm for diameter.On the 3rd,7th,10th and 14th days,the expression levels of albumin(ALB)mRNA were 1.00±0.02,0.96±0.02,0.54±0.07,0.52±0.07,and the expression levels of cytochrome P450 1A2(CYP1A2)mRNA were 1.00±0.10,2.15±0.16,2.45±0.33,1.30±0.03,respectively.The expression levels of multidrug resistance protein 2(MPR2)in the control group and the experimental-L,-M,-H groups were 1.00±0.31,1.38±0.24,1.48±0.06 and 1.90±0.08,respectively;spheroid viability were(98.19±0.49)％,(88.53±0.90)％,(71.60±2.91)％and(56.65±5.41)％.There were statistically significant differences in the above indexes between the experimental-L,-M,-H groups and the control group(all P＜0.05).Conclusion The established hepatocyte sphere co-culture model showed varying degrees of expression of phase Ⅰ/Ⅱ drug metabolism enzymes,transporters,and liver cell specific marker molecule albumin and can be used to evaluate the toxicity of multiflorum multiflorum,which provides further reference for the clinical application of multiflorum multiflorum.

Objective:To analyze the influence of forming direction on the surface characteristics,elastic modulus,bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction,and to provide scientific basis and guidance for the clinical applica-tion of oral denture base resin materials.Methods:The 3D printing technology was used to print denture base resin samples.The shape and size of the samples referred to the current standard for testing conven-tional denture base materials.The samples used for physical performance testing were cylindrical(with a diameter of 15 mm and a thickness of 1 mm)and printed at different angles along the Z axis(0°,45°,90°).Scanning electron microscope was used to observe the microscopic topography of the different sam-ples.The color stability of different samples was observed by color stabilizer.The surface roughness of the samples was analyzed by using surface roughness tester.The Vickers hardness was measured to ana-lyze the hardness of the samples.The samples used for mechanical performance testing were rectangular(elastic modulus and bending strength:A length of 64 mm,a width of 10 mm,and a height of 3.3 mm;fracture toughness:A length of 39 mm,a width of 8 mm,and a height of 4 mm),divided into two groups:W group and H group.The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X,Y axis plane,while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X,Y axis plane.The forming angles of both groups were equally divided into 0°,45°,and 90°.The elastic modulus,bending strength and fracture toughness of different samples were studied through universal mechanical testing machine.SPSS 22.0 software was used for statistical analysis.Results:The microscopic topogra-phy and roughness of different samples were closely related to the printing direction,with significant differences between the 0°,45°,and 90° specimens.The 0° specimens had the smoothest surface(roughness＜1 μm).The surface of the 45 ° specimen was the roughest(roughness＞3 μm).The microhardness of the 0° sample was the best[(196.13±0.20)MPa],with a significant difference com-pared with the 90° sample[(186.62±4.81)MPa,P＜0.05].The mechanical properties of different samples were also closely related to the printing direction.The elastic modulus,bending strength,and fracture toughness of the 45° samples in the W group were the highest compared with the other groups.The results of elastic modulus showed that in the H group,the 45° specimens had the highest elastic mo-dulus,which was significantly different from the 0° and 90° specimens(P＜0.05).The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens(P＜0.05).The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group.The bending strength of the 90° specimens in the W group was the smallest,and there was a significant difference between 90° and the 0° and 45° specimens(P＜0.05);And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group(P＜0.05).The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2,which was specified in the denture base standard.The 45° samples in the W group were the highest,with significant differences compared with the 0° and 90° samples(P＜0.05).And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2.And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group(P＜0.05).Conclusion:The 0° samples had rela-tively better physical properties.The 45° samples had the best mechanical properties.But the fracture toughness of specimens(H group and 90° samples of W group)did not yet meet clinical requirements.That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction.Only when the performance of the printed samples in all directions met the minimum require-ments of the standard,they could be used in clinical practice.

Important forensic diagnostic indicators of sudden death in coronary atherosclerotic heart dis-ease,such as acute or chronic myocardial ischemic changes,sometimes make it difficult to locate the ischemic site due to the short death process,the lack of tissue reaction time.In some cases,the de-ceased died of sudden death on the first-episode,resulting in difficulty for medical examiners to make an accurate diagnosis.However,clinical studies on coronary instability plaque revealed the key role of coronary spasm and thrombosis caused by their lesions in sudden coronary death process.This paper mainly summarizes the pathological characteristics of unstable coronary plaque based on clinical medi-cal research,including plaque rupture,plaque erosion and calcified nodules,as well as the influencing factors leading to plaque instability,and briefly describes the research progress and technique of the atherosclerotic plaques,in order to improve the study on the mechanism of sudden coronary death and improve the accuracy of the forensic diagnosis of sudden coronary death by diagnosing different patho-logic states of coronary atherosclerotic plaques.