Objective: To design and establish a new method for flow cytometry-based detection of commonly observed highly expressed antigens on red blood cells, and to further evaluate the differences and distribution characteristics of antigen expression levels between ABO blood type homozygotes and heterozygotes in healthy individuals. Methods: Residual blood samples after donor blood type identification by Shanghai Blood Center in April 2024 were collected. Among them, samples of 19 homozygous and 19 heterozygous individuals of type A and type B were selected. Then the expression level of ABO antigen on red blood cells were detected using the new method established in this study and the traditional aldehyde fixed red blood cell method. Both methods were tested independently three times and the results were compared. Results: The mean values of the three detection results of the new method was (×10 /RBC): AA homozygous 3.3±0.5, AO heterozygous 2.8±0.3, BB homozygous 3.6±0.3, BO heterozygous 3.1±2.8. The mean values of the three detection results of the aldehyde fixation method were AA homozygous 5.9±0.9, AO heterozygous 5.0±1.4, BB homozygous 3.8±0.6, and BO heterozygous 3.3±0.4. The average antigen distribution of each genotype followed a normal distribution. Comparing the average antigen expression levels of homozygotes and heterozygotes, both methods showed that A/B homozygotes had higher antigen levels than heterozygotes, with AA being 1.17 to 1.18 times that of AO and BB being 1.15 to 1.16 times that of BO. Comparing the inter batch differences in the three test results of two methods, the new method showed no significant difference in the three test results for four genotypes (P>0.05). The aldehyde fixation method showed significant differences in the test results for all three genotypes (P<0.01) except for BB homozygotes (P>0.05). The reliability and reproducibility of the new method were better than those of the traditional aldehyde fixation method. Conclusion: The antigen expression level of ABO homozygotes is higher than that of heterozygotes, and the difference in antigen level between type A homozygotes and heterozygotes is slightly higher than that of type B. The new method is superior to traditional aldolization fixation methods.

Animal experiments are widely used in biomedical research for safety assessment, toxicological analysis, efficacy evaluation, and mechanism exploration. In recent years, the ethical review system has become more stringent, and awareness of animal welfare has continuously increased. To promote more efficient and cost-effective drug research and development, the United States passed the Food and Drug Administration (FDA) Modernization Act 2.0 in September 2022, which removed the federal mandate requiring animal testing in preclinical drug research. In April 2025, the FDA further proposed to adopt a series of "new alternative methods" in the research and development of drugs such as monoclonal antibodies, which included artificial intelligence computing models, organoid toxicity tests, and 3D micro-physiological systems, thereby gradually phasing out traditional animal experiment models. Among these cutting-edge technologies, 3D bioprinting models are a significant alternative and complement to animal models, owing to their high biomimetic properties, reproducibility, and scalability. This review provides a comprehensive overview of advancements and applications of 3D bioprinting technology in the fields of biomedical and pharmaceutical research. It starts by detailing the essential elements of 3D bioprinting, including the selection and functional design of biomaterials, along with an explanation of the principles and characteristics of various printing strategies, highlighting the advantages in constructing complex multicellular spatial structures, regulating microenvironments, and guiding cell fate. It then discusses the typical applications of 3D bioprinting in drug research and development,including high-throughput screening of drug efficacy by constructing disease models such as tumors, infectious diseases, and rare diseases, as well as conducting drug toxicology research by building organ-specific models such as those of liver and heart. Additionally,the review examines the role of 3D bioprinting in tissue engineering, discussing its contributions to the construction of functional tissues such as bone, cartilage, skin, and blood vessels, as well as the latest progress in regeneration and replacement. Furthermore, this review analyzes the complementary advantages of 3D bioprinting models and animal models in the research of disease progression, drug mechanisms, precision medicine, drug development, and tissue regeneration, and discusses the potential and challenges of their integration in improving model accuracy and physiological relevance. In conclusion, as a cutting-edge in vitro modeling and manufacturing technology, 3D bioprinting is gradually establishing a comprehensive application system covering disease modeling, drug screening, toxicity prediction, and tissue regeneration.

Animal experiments are widely used in biomedical research for safety assessment, toxicological analysis, efficacy evaluation, and mechanism exploration. In recent years, the ethical review system has become more stringent, and awareness of animal welfare has continuously increased. To promote more efficient and cost-effective drug research and development, the United States passed the Food and Drug Administration (FDA) Modernization Act 2.0 in September 2022, which removed the federal mandate requiring animal testing in preclinical drug research. In April 2025, the FDA further proposed to adopt a series of "new alternative methods" in the research and development of drugs such as monoclonal antibodies, which included artificial intelligence computing models, organoid toxicity tests, and 3D micro-physiological systems, thereby gradually phasing out traditional animal experiment models. Among these cutting-edge technologies, 3D bioprinting models are a significant alternative and complement to animal models, owing to their high biomimetic properties, reproducibility, and scalability. This review provides a comprehensive overview of advancements and applications of 3D bioprinting technology in the fields of biomedical and pharmaceutical research. It starts by detailing the essential elements of 3D bioprinting, including the selection and functional design of biomaterials, along with an explanation of the principles and characteristics of various printing strategies, highlighting the advantages in constructing complex multicellular spatial structures, regulating microenvironments, and guiding cell fate. It then discusses the typical applications of 3D bioprinting in drug research and development,including high-throughput screening of drug efficacy by constructing disease models such as tumors, infectious diseases, and rare diseases, as well as conducting drug toxicology research by building organ-specific models such as those of liver and heart. Additionally,the review examines the role of 3D bioprinting in tissue engineering, discussing its contributions to the construction of functional tissues such as bone, cartilage, skin, and blood vessels, as well as the latest progress in regeneration and replacement. Furthermore, this review analyzes the complementary advantages of 3D bioprinting models and animal models in the research of disease progression, drug mechanisms, precision medicine, drug development, and tissue regeneration, and discusses the potential and challenges of their integration in improving model accuracy and physiological relevance. In conclusion, as a cutting-edge in vitro modeling and manufacturing technology, 3D bioprinting is gradually establishing a comprehensive application system covering disease modeling, drug screening, toxicity prediction, and tissue regeneration.

OBJECTIVE: To explore early curative effect of upper joint capsule reconstruction combined with biceps tendon transposition in treating irreparable rotator cuff tears. METHODS: From October 2019 to March 2021, 16 patients with irreparable rotator cuff tear were underwent arthroscopic autogenous semitendinosus tendon transplantation for upper articular capsule reconstruction combined with biceps tendon transposition, included 12 males and 4 females, aged from 53 to 72 years old with an average of (62.13±5.35) years old; 3 patients on the left side and 13 patients on the right side. All patients had preoperatively limited joint mobility, resting pain, and mobility pain, and had a history of failure to respond to conservative treatment for more than 8 months. The duration of preoperative symptoms ranged from 45 to 144 months with an average of (85.25±32.08) months. Visual analogue scale (VAS) of shoulder pain, University of California Los Angeles (UCLA) score, Constant-Murley score, active and passive motion of shoulder joint were compared before operation and 2 years after operation, complications were recorded. RESULTS: All 16 patients were followed up for 21 to 32 months with an average of (24.25±3.57) months. There were no complications such as incision infection, vascular and nerve injury, retear occurred. VAS, UCLA and Constant-Murley scores were improved from (5.75±1.18), (11.88±3.38) and (33.38±9.34) before operation to (1.13±0.89), (32.56±2.71), (89.06±6.25) at 2 years after operation (P<0.05). Anterior flexion, abduction, lateral external rotation and lateral internal rotation of shoulder joint were improved from (79.75±21.36) °, (62.06±10.49) °, (19.19±5.41) °, (3.04±0.21) °, respectively to (156.94±13.18) °, (116.19±12.59) °, (42.63±6.07) °, (8.16±0.64) ° at 2 years after operation. Anterior flexion, abduction, lateral lateral rotation and lateral internal rotation of shoulder joint were improved from (116.28±21.47) °, (107.12±9.67) °, (27.62±4.70) °, (4.21±0.41) °, respectively to (165.28±7.15) °, (153.34±4.69) °, (52.46±4.46) °, (9.68±0.68) ° at 2 years after operation, and the difference was statistically significant (P<0.05). CONCLUSION Arthroscopic autograft of semitendinosus tendon combined with transposition of biceps tendon could achieve satisfactory early clinical results in treating patients with irreparable rotator cuff tear, which is a reliable and effective surgical method.
Humans ; Male ; Female ; Middle Aged ; Aged ; Arthroscopy/methods* ; Rotator Cuff Injuries/physiopathology* ; Plastic Surgery Procedures/methods* ; Range of Motion, Articular ; Shoulder Joint/surgery* ; Tendon Transfer

OBJECTIVE: To explore clinical effect of autologous osteochondral transplantation (AOT) in the treatment of recurrent anterior dislocation of the shoulder joint with glenoid cartilage defect in rabbits by establishing a model of recurrent anterior dislocation of the shoulder joint with < 20% glenoid cartilage defect in rabbits. METHODS: Twenty-four male New Zealand white rabbits, aged 6-month-old, weighed (2.69±0.17) kg were selected. The labrum of shoulder joint of rabbits was artificially destroyed to establish a model of recurrent anterior dislocation of shoulder joint with cartilage defect. They were divided into AOT surgery group and simple suture group, with 12 rabbits in each group. AOT group were underwent AOT surgery, while simple suture group was treated with simple Bankart suture for recurrent shoulder joint dislocation. At 6 and 12 weeks after operation, 6 rabbits between two groups were sacrificed for sampling. The dietary conditions, activity conditions, mental states of rabbits and healing conditions of grafts in the specimens were observed and compared between two groups. HE staining was used to observe cell creep, cell morphology, inflammatory cell infiltration, fibrochondrocytes and their arrangement. Masson staining was used to observe the formation and arrangement of collagen fibers; Safrane-green staining was used to observe the regeneration of articular cartilage, subchondral bone and bone tissue. Bone mineral density (BMD), bone volume (BV) and trabecular thickness (Tb.Th) between two groups were measured by Micro-CT to evaluate the remodeling of shoulder glenoid bone defects by autologous osteochondral cartilage. RESULTS: After different surgical interventions were carried out in both groups of rabbits, at 6 weeks after the operation, the abduction, extension, internal rotation and external rotation of the shoulder joint on the operated side showed limited range of motion compared with the contralateral side, while adduction and forward flexion showed no obvious abnormalities compared with the contralateral side. At 12 weeks after operation, the range motion of tshoulder joints in both groups of rabbits had returned to the state before modeling. The effects of HE staining, Masson staining and safrane-green staining at 12 weeks after operation in both groups were stronger than the staining results at 6 weeks after operation. Moreover, the results of HE staining, Masson staining and safranin fixation green staining in AOT group at 6 and 12 weeks after operation were all higher than those in simple suture group. Micro-CT scan results at 6 and 12 weeks after operation showed that BMD (0.427±0.014), (0.466±0.032) g·cm-3, BV(116.171±3.527), (159.327±3.500) mm3, and Tb.Th (0.230±0.006), (0.285±0.009) mm in AOT group, which were higher than those of simple suture group in BMD(0.358±0.011), (0.384±0.096) g·cm-3, BV(72.657±3.903), (118.713±3.860) mm3, and Tb.Th(0.204±0.009), (0.243±0.007) mm;and the differences were statistically significant (P<0.05). CONCLUSION AOT procedure could effectively promote osteogenesis and fibrocartilage regeneration in the cartilage defect area of the shoulder glenoid <20%, which is conducive to reshaping the structure of the shoulder glenoid.
Animals ; Rabbits ; Male ; Transplantation, Autologous ; Cartilage, Articular/injuries* ; Shoulder Dislocation/physiopathology* ; Bone Transplantation ; Shoulder Joint/surgery*

OBJECTIVE: To study the clinical efficacy of Wenyang Lishui Formula (WYLSF) in preventing ovarian hyperstimulation syndrome (OHSS) and explore the suitable range of estradiol (E₂) on the human chorionic gonadotropin (HCG) day in patients with OHSS using WYLSF. METHODS: Part I: eligible patients at high risk for OHSS undergoing ovulation induction between January and December, 2023 were randomized into 2 groups based on the actual treatment. The treatment group received 200 mL WYLSF formula twice daily for 5 days after oocyte retrieval in a combination of lifestyle coaching (LC) intervention including regular diet and exercise, whereas the LC group received LC intervention alone. The incidence of OHSS, OHSS self-assessment scales, changes in E₂ levels on HCG day and 5 days after oocyte retrieval, ovarian morphology changes, and menstrual recovery were compared between the two groups. Part II: patients at high risk for OHSS treated with WYLSF were studied. The optimal E₂ threshold on the HCG day was determined using the maximum selection test, and a multivariate analysis was adopted to compare the relationship between different E₂ levels on HCG day and hospitalization rate, incidence of moderate to severe OHSS, and self-assessment scales, to explore the preventive effect of WYLSF on OHSS in patients with varying E₂ levels. RESULTS: A total of 120 patients were included in the Part I analysis. The treatment group (60 cases) showed a significant reduction in the incidence, duration, and severity of abdominal distension, as well as the incidence of vomiting compared with the LC group (P<0.05). The post-retrieval E₂ levels in the treatment group decreased significantly more (P=0.032). Among 1,652 patients treated with WYLSF in the Part II, 90 patients with ⩽ 10092 pmol/L, 159 with >31074 pmol/L, and 1,403 in the middle range group were formed based on E₂ levels on HCG day in Part two analysis. Univariate and regression analyses showed that patients with E₂ levels >31073 pmol/L had a significantly higher incidence of moderate to severe OHSS compared to those with E₂ levels ⩽ 10092 pmol/L (P<0.05). CONCLUSIONS WYLSF can effectively reduce specific symptoms in high-risk OHSS patients after ovulation induction and significantly lower E₂ levels. It may be more suitable for high-risk OHSS patients with E₂ levels <31073 pmol/L on HCG day. (Registration No. MR-11-23-032493, https://www.medicalresearch.org.cn/login ).
Humans ; Ovarian Hyperstimulation Syndrome/blood* ; Female ; Adult ; Prospective Studies ; Drugs, Chinese Herbal/pharmacology* ; Estradiol/blood* ; Ovulation Induction ; Chorionic Gonadotropin

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

Abstract In recent years, the prevalence of overweight and obesity among children and adolescents has risen rapidly, posing a serious threat to their physical and mental health. To provide scientific, systematic, and standardized weight management guidance for overweight and obese children and adolescents, the study focuses on the core concept of healthy lifestyle intervention, integrates multidisciplinary expert opinions and research findings,and proposes a comprehensive multidisciplinary intervention framework covering scientific exercise intervention, precise nutrition and diet, optimized sleep management, and standardized psychological support. It calls for the establishment of a multi agent collaborative management mechanism led by the government, implemented by families, fostered by schools, initiated by individuals, optimized by communities, reinforced by healthcare, and coordinated by multiple stakeholders. Emphasizing a child and adolescent centered approach, the consensus advocates for comprehensive, multi level, and personalized guidance strategies to promote the internalization and maintenance of a healthy lifestyle. It serves as a reference and provides recommendations for the effective prevention and control of overweight and obesity, and enhancing the health level of children and adolescents.

BACKGROUND:Currently,a variety of mesenchymal stem cells have been confirmed to have the effect of promoting wound repair,but there is still a lack of relevant research on whether placenta-derived mesenchymal stem cells can promote acute skin wound healing. OBJECTIVE:To investigate the effect of placenta-derived mesenchymal stem cell transplantation on the healing of acute skin wound in rats. METHODS:Twenty SD rats were divided into PBS group and stem cell group by the random number table method,with 10 rats in each group.All rats were selected to establish a full-thickness skin defect model.In the PBS group and stem cell group,PBS buffer and placenta-derived mesenchymal stem cells were immediately injected on the wound surface and wound margin immediately and on day 8 after modeling.The wound healing was observed immediately and on days 2,4,6,8,10,12,and 14 after modeling.The skin tissue of the wound surface was taken on day 14 and treated with hematoxylin-eosin staining,Masson staining,immunohistochemical staining and immunofluorescence staining. RESULTS AND CONCLUSION:(1)The wound surface of the rats in each group decreased with the prolongation of treatment time.The wound healing rate and wound epithelization rate of the stem cell group at 14 days were higher than those of the PBS group(P<0.01),and the wound contracture rate was lower than that of the PBS group(P<0.01).(2)The results of hematoxylin-eosin staining showed that the skin wound healing of the stem cell group was better than that of the PBS group;the degree of wound epithelization was higher,and the morphology of collagen fibers was close to that of normal skin.(3)Masson staining results showed that compared with the PBS group,collagen fibers in the skin wound tissue of the stem cell group were significantly increased and thicker,and the content of collagen fibers in the new tissue was significantly higher than that of the PBS group(P<0.01).(4)Immunohistochemical staining showed that the number of new capillaries in the stem cell group was higher than that in the PBS group(P<0.01),while the expressions of tumor necrosis factor-α and interleukin-6 were lower than those in the PBS group(P<0.01).(5)Immunofluorescence staining showed that the number of M2 macrophages in the new wounds of the stem cell group was higher than that of the PBS group(P<0.01),while the number of M1 macrophages was less than that in the PBS group(P<0.01).These findings indicate that placenta-derived mesenchymal stem cells can accelerate skin wound healing,promote wound epithelization,and reduce wound contracture,which may be related to the promotion of capillary angiogenesis,regulation of collagen fiber production,inhibition of inflammation,and regulation of macrophage polarization to M2 type.