With the continuous deepening of the concept of precision diagnosis and treatment for lung cancer, how to achieve higher efficiency and accuracy in the screening, diagnosis, and treatment pathways in clinical practice has become an important issue that urgently needs to be overcome. The current clinical difficulty lies in the fact that despite continuous advancements in imaging and molecular diagnostic technologies, there are still limitations in manual efficiency and subjective experience when it comes to massive data analysis and multi-scale feature extraction. Artificial intelligence (AI), especially algorithm systems based on deep learning, is an innovative technology capable of deeply empowering medical big data. This method utilizes algorithms such as convolutional neural networks, combined with radiomics, pathomics, and multi-modal data fusion analysis, demonstrating immense potential in early precise detection and benign-malignant differentiation of pulmonary nodules, digital pathological subtype recognition and non-invasive prediction of driver genes, precise 3D surgical planning and automatic delineation of radiotherapy target volumes, as well as dynamic risk warning during follow-up. This innovative technology provides a brand-new solution for realizing intelligent and individualized lung cancer diagnosis and treatment models. This consensus, based on the latest evidence from evidence-based medicine and combined with the development trends in the AI field and real-world clinical needs, was ultimately formed by gathering the consensus opinions of multidisciplinary experts in radiology, pathology, thoracic surgery, and other fields. The main content covers the application specifications of AI in the three core scenarios of lung cancer screening, diagnosis, and treatment, the technical standards for data collection and algorithm validation, as well as the ethical and regulatory challenges faced at the current stage. It aims to clarify the applicable boundaries of AI as a clinical auxiliary decision support tool, providing scientific guidance and standardized exploration directions for peers currently engaged in or planning to carry out AI-assisted clinical diagnosis, treatment, and translation of lung cancer.

To address the growing challenge of an increasing number of elderly lung cancer patients amidst China's aging population and to fill the gap in quality control standards for surgical treatment in this special population, this study aimed to develop a standardized surgical evaluation system for elderly lung cancer patients tailored to China's national conditions. The system was established through a literature review, integrated the pathophysiological characteristics of elderly patients, and was constructed following review, feedback, and revision by experts from multiple thoracic surgery centers. Employing a 100-point scoring system, it comprises three primary domains: physical infrastructure and geriatric adaptability foundational conditions (10 points); management level and perioperative care models (20 points); and technical proficiency and clinical outcomes (70 points). The system places a strong emphasis on geriatric adaptability, proposing specific, quantifiable indicators for age-friendly facility modifications, control of elderly-specific complications, multidisciplinary collaboration, and standardized perioperative management. It provides a convenient and measurable assessment tool for quality control in the surgical treatment of elderly lung cancer in China, which is expected to promote the standardization and homogenization of diagnosis and treatment.

AIM:To investigate the effects of early high-fat diet(HFD)on cognitive function and hippocam-pal lipidomic profile in transgenic mice bearing five familial Alzheimer disease mutant genes(5×FAD).METHODS:Eight-week-old SPF grade female wild-type(WT)mice were used as the contorl group,and 5×FAD mice were randomly divided into model(5×FAD)group and 5×FAD+HFD group,with 10 mice in each group.The 5×FAD+HFD group was orally given high-fat chow and the remaining 2 groups were given control chow for 12 weeks,and the change in body weight of the mice were recorded.Y-maze and Morris water maze tests were performed to measure the learning memory ability of the mice.Serum total cholesterol(TC),triglyceride(TG),low-density lipoprotein cholesterol(LDL-C)and high-density lipoprotein cholesterol(HDL-C)levels were measured using a biochemical analyzer.Immunohistochemistry was per-formed to visualize amyloid β-protein(Aβ)plaques in brain tissues.Hippocampal levels of tumor necrosis factor-α(TNF-α),interleukin-1β(IL-1β),IL-6,and Aβ were measured by enzyme-linked immunosorbent assay(ELISA).Non-tar-geted lipidomic technology was used to measure the changes of hippocampal lipids.RESULTS:Compared with WT group,the mice in 5×FAD group lost significantly less weight(P<0.01)and spent significantly less time exploring the new arm of the Y-maze and the target quadrant of the water maze(P<0.05 or P<0.01).Brain Aβ plaques were significant-ly increased(P<0.01).Hippocampal levels of Aβ1-40,Aβ1-42,IL-1β and TNF-α were significantly elevated(P<0.05 or P<0.01).Compared with the 5×FAD group,the mice in the 5×FAD+HFD group showed significant increase in body weight(P<0.01)and time spent exploring the new arm of the Y-maze and the target quadrant of the water maze(P<0.01).Biochmeical analysis showed serum TC,LDL-C,HDL-C levels and HDL/TC ratio were significantly increased(P<0.05).Brain Aβ plaques were significantly reduced(P<0.05)and hippocampal Aβ1-40,Aβ1-42 and IL-1β levels were sig-nificantly decreased(P<0.05).Compared with the WT group,27 lipids were increased and 9 lipids were decreased in the 5×FAD group,involving the pathways such as cholesterol metabolism,fat digestion and absorption,regulation of lipolysis processes in adipocytes,and glycerophospholipid metabolism.Eighteen lipids were increased and 47 lipids were de-creased in the 5×FAD+HFD group compared to the 5×FAD group.Cardiolipin and TG were important lipids for separating the lipid profiles of the WT and 5×FAD groups,and TG was an important lipid for separating the lipid profiles of the 5×FAD and 5×FAD+HFD groups.Differential lipid enrichment analysis showed significant increase in TG lipid in the 5×FAD group compared with the WT group and significant decrease in TG lipid in the 5×FAD+HFD group compared with the 5×FAD group.CONCLUSION:Early HFD ameliorates cognitive function in 5×FAD mice by modifying TG metabolic disorder and attenuating neuroinflammation.

Objective:To investigate the short-term clinical efficacy of implantation with a 3D-printed microporous titanium prosthesis in the treatment of large segmental infectious tibial defects.Methods:A retrospective analysis was conducted of the electronic medical records of the 47 patients with large segmental tibial defects who had been treated with 3D-printed microporous titanium prostheses at Department of Orthopaedics, 920th Hospital of Joint Logistics Support Force from January 2019 to February 2024. The cohort included 36 males and 11 females, with an age of (46.2±11.8) years and a mean bone defect length of 12.3 (8.0, 16.8) cm. In the 19 patients complicated with soft tissue defects, the area of soft tissue defects ranged from 10.0 cm × 6.0 cm to 33.0 cm × 10.0 cm. For the 28 patients without soft tissue defects at the lower leg, the bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage; for the 19 patients complicated with soft tissue defects, the soft tissue defects at the lower limb were repaired using an anterolateral thigh flap with vascular anastomosis at the same time when bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage. After infection control at 2 to 8 months after surgery, individualized 3D-printed microporous titanium prostheses were implanted at the second stage to reconstruct the bone defects. Postoperative observations included the patients' first standing time, crutch walking time, full weight-bearing time, osseointegration of the tibial fracture and the prosthesis, and complications during follow-up.Results:The follow-up period for the 47 patients was (34.7±14.3) months. The first standing time was (2.2±0.6) months, crutch walking time (3.8±1.1) months, and full weight-bearing time (5.3±1.2) for this cohort. The evaluation by the Paley's bone healing score resulted in 25 excellent cases, 18 good cases, 1 medium case, and 3 poor cases, giving an excellent and good rate of 91.5% (43/47). One year after operation, the X-ray films showed that the tibial fractures and prostheses were well integrated in the 43 patients. Two patients developed recurrent tibial infection which was responded to replacement of the vancomycin-loaded calcium sulfate spacer. The fixation screws for tibial prosthesis were broken in one patient, but no recurrence of infection was observed after revision. The overall incidence of complications was 6.4% (3/47).Conclusion:In the treatment of large segmental infectious tibial defects, by facilitating rapid functional recovery and ensuring a low incidence of complications, implantation with a 3D-printed microporous titanium prosthesis demonstrates fine short-term clinical efficacy.

OBJECTIVE: To analyze the effectiveness of single three-dimensional (3D)-printed microporous titanium prostheses and flap combined prostheses implantation in the treatment of large segmental infectious bone defects in limbs. METHODS: A retrospective analysis was conducted on the clinical data of 76 patients with large segmental infectious bone defects in limbs who were treated between January 2019 and February 2024 and met the selection criteria. Among them, 51 were male and 25 were female, with an age of (47.7±9.4) years. Of the 76 patients, 51 had no soft tissue defects (single prostheses group), while 25 had associated soft tissue defects (flap combined group). The single prostheses group included 28 cases of tibial bone defects, 11 cases of femoral defects, 5 cases of humeral defects, 4 cases of radial bone defects, and 3 cases of metacarpal, or carpal bone defects, with bone defect length ranging from 3.5 to 28.0 cm. The flap combined group included 3 cases of extensive dorsum of foot soft tissue defects combined with large segmental metatarsal bone defects, 19 cases of lower leg soft tissue defects combined with large segmental tibial bone defects, and 3 cases of hand and forearm soft tissue defects combined with metacarpal, carpal, or radial bone defects, with bone defect length ranging from 3.8 to 32.0 cm and soft tissue defect areas ranging from 8 cm×5 cm to 33 cm×10 cm. In the first stage, vancomycin-loaded bone cement was used to control infection, and flap repair was performed in the flap combined group. In the second stage, 3D-printed microporous titanium prostheses were implanted. Postoperative assessments were performed to evaluate infection control and bone integration, and pain release was evaluated using the visual analogue scale (VAS) score. RESULTS: All patients were followed up postoperatively, with an average follow-up time of (35.2±13.4) months. In the 61 lower limb injury patients, the time of standing, walk with crutches, and fully bear weight were (2.2±0.6), (3.9±1.1), and (5.4±1.1) months, respectively. The VAS score at 1 year postoperatively was significantly lower than preoperative one ( t=-10.678, P<0.001). At 1 year postoperatively, 69 patients (90.8%) showed no complication such as infection, fracture, prosthesis displacement, or breakage, and X-ray films indicated good integration at the prosthesis-bone interface. According to the Paley scoring system for the healing of infectious bone defects, the results were excellent in 37 cases, good in 29 cases, fair in 3 cases, and poor in 7 cases. In the single prostheses group, during the follow-up, there was 1 case each of femoral prostheses fracture, femoral infection, and tibial infection, with a treatment success rate of 94.1% (48/51). In lower limb injury patients, the time of fully bear weight was (5.0±1.0) months. In the flap combined group, during the follow-up, 1 case of tibial fixation prostheses screw fracture occurred, along with 2 cases of recurrent foot infection in diabetic patients and 1 case of tibial infection. The treatment success rate was 84.0% (21/25). The time of fully bear weight in lower limb injury patients was (5.8±1.2) months. The overall infection eradication rate for all patients was 93.4% (71/76). CONCLUSION The use of 3D-printed microporous titanium prostheses, either alone or in combination with flaps, for the treatment of large segmental infectious bone defects in the limbs results in good effectiveness with a low incidence of complications. It is a feasible strategy for the reconstruction of infectious bone defects.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Titanium ; Retrospective Studies ; Surgical Flaps ; Adult ; Prosthesis Implantation/methods* ; Plastic Surgery Procedures/methods* ; Treatment Outcome ; Prostheses and Implants ; Bone Diseases, Infectious/surgery* ; Extremities/surgery* ; Prosthesis Design

Objective To evaluate the diagnostic performance of the minimum-cost-path-based CT angiography-derived fractional flow reserve(MCP-FFR)and the deep learning-driven CT angiography-derived fractional flow reserve(DeepCL-FFR),and to particularly explore the potential value of the DeepCL algorithm in improving diagnostic accuracy within the"gray zone."Methods A retrospective analysis was conducted on 151 coronary vessels from 109 patients with coronary artery disease,who were hospitalized at the General Hospital of the People's Liberation Army between January 2020 and June 2021.Pearson correlation and Bland-Altman plots were employed to assess the correlation and agreement of the two CT-FFR methods with invasive FFR.A CT-FFR range of 0.70-0.80 was defined as the diagnostic"gray zone."The accuracy,sensitivity,specificity,positive predictive value,and negative predictive value for detecting hemodynamic abnormalities were calculated and analyzed.The DeLong test was used to compare the areas under the receiver operating characteristic curves(AUC)between the two CT-FFR calculation methods.Results Both CT-FFR methods exhibited a positive correlation with invasive FFR(MCP-FFR:r=0.75,P＜0.001;DeepCL-FFR:r=0.86,P＜0.001)and showed good agreement(MCP-FFR:mean difference=0.010,P=0.351;DeepCL-FFR:mean difference=-0.003,P=0.772).Both DeepCL-FFR(AUC 0.97,95％CI 0.94-0.99)and MCP-FFR(AUC 0.92,95％CI 0.88-0.97)demonstrated favorable diagnostic performance for detecting hemodynamic abnormalities(P=0.122).In the"gray zone"for hemodynamic abnormality,the diagnostic accuracy of MCP-FFR was 68.8％,whereas DeepCL-FFR increased it to 89.7％.DeepCL-FFR also exhibited superior diagnostic performance(AUC 0.89,95％CI 0.73-0.99)within the"gray zone,"which was significantly higher than that of MCP-FFR(AUC 0.71,95％CI 0.54-0.87)(P＜0.001).Conclusions The deep learning-driven coronary centerline extraction algorithm,DeepCL,demonstrates superior diagnostic performance in CT-FFR for detecting hemodynamic abnormalities,particularly by significantly improving diagnostic accuracy in the"gray zone."

AIM:To investigate the effects of early high-fat diet(HFD)on cognitive function and hippocam-pal lipidomic profile in transgenic mice bearing five familial Alzheimer disease mutant genes(5×FAD).METHODS:Eight-week-old SPF grade female wild-type(WT)mice were used as the contorl group,and 5×FAD mice were randomly divided into model(5×FAD)group and 5×FAD+HFD group,with 10 mice in each group.The 5×FAD+HFD group was orally given high-fat chow and the remaining 2 groups were given control chow for 12 weeks,and the change in body weight of the mice were recorded.Y-maze and Morris water maze tests were performed to measure the learning memory ability of the mice.Serum total cholesterol(TC),triglyceride(TG),low-density lipoprotein cholesterol(LDL-C)and high-density lipoprotein cholesterol(HDL-C)levels were measured using a biochemical analyzer.Immunohistochemistry was per-formed to visualize amyloid β-protein(Aβ)plaques in brain tissues.Hippocampal levels of tumor necrosis factor-α(TNF-α),interleukin-1β(IL-1β),IL-6,and Aβ were measured by enzyme-linked immunosorbent assay(ELISA).Non-tar-geted lipidomic technology was used to measure the changes of hippocampal lipids.RESULTS:Compared with WT group,the mice in 5×FAD group lost significantly less weight(P<0.01)and spent significantly less time exploring the new arm of the Y-maze and the target quadrant of the water maze(P<0.05 or P<0.01).Brain Aβ plaques were significant-ly increased(P<0.01).Hippocampal levels of Aβ1-40,Aβ1-42,IL-1β and TNF-α were significantly elevated(P<0.05 or P<0.01).Compared with the 5×FAD group,the mice in the 5×FAD+HFD group showed significant increase in body weight(P<0.01)and time spent exploring the new arm of the Y-maze and the target quadrant of the water maze(P<0.01).Biochmeical analysis showed serum TC,LDL-C,HDL-C levels and HDL/TC ratio were significantly increased(P<0.05).Brain Aβ plaques were significantly reduced(P<0.05)and hippocampal Aβ1-40,Aβ1-42 and IL-1β levels were sig-nificantly decreased(P<0.05).Compared with the WT group,27 lipids were increased and 9 lipids were decreased in the 5×FAD group,involving the pathways such as cholesterol metabolism,fat digestion and absorption,regulation of lipolysis processes in adipocytes,and glycerophospholipid metabolism.Eighteen lipids were increased and 47 lipids were de-creased in the 5×FAD+HFD group compared to the 5×FAD group.Cardiolipin and TG were important lipids for separating the lipid profiles of the WT and 5×FAD groups,and TG was an important lipid for separating the lipid profiles of the 5×FAD and 5×FAD+HFD groups.Differential lipid enrichment analysis showed significant increase in TG lipid in the 5×FAD group compared with the WT group and significant decrease in TG lipid in the 5×FAD+HFD group compared with the 5×FAD group.CONCLUSION:Early HFD ameliorates cognitive function in 5×FAD mice by modifying TG metabolic disorder and attenuating neuroinflammation.

Objective To evaluate the diagnostic performance of the minimum-cost-path-based CT angiography-derived fractional flow reserve(MCP-FFR)and the deep learning-driven CT angiography-derived fractional flow reserve(DeepCL-FFR),and to particularly explore the potential value of the DeepCL algorithm in improving diagnostic accuracy within the"gray zone."Methods A retrospective analysis was conducted on 151 coronary vessels from 109 patients with coronary artery disease,who were hospitalized at the General Hospital of the People's Liberation Army between January 2020 and June 2021.Pearson correlation and Bland-Altman plots were employed to assess the correlation and agreement of the two CT-FFR methods with invasive FFR.A CT-FFR range of 0.70-0.80 was defined as the diagnostic"gray zone."The accuracy,sensitivity,specificity,positive predictive value,and negative predictive value for detecting hemodynamic abnormalities were calculated and analyzed.The DeLong test was used to compare the areas under the receiver operating characteristic curves(AUC)between the two CT-FFR calculation methods.Results Both CT-FFR methods exhibited a positive correlation with invasive FFR(MCP-FFR:r=0.75,P＜0.001;DeepCL-FFR:r=0.86,P＜0.001)and showed good agreement(MCP-FFR:mean difference=0.010,P=0.351;DeepCL-FFR:mean difference=-0.003,P=0.772).Both DeepCL-FFR(AUC 0.97,95％CI 0.94-0.99)and MCP-FFR(AUC 0.92,95％CI 0.88-0.97)demonstrated favorable diagnostic performance for detecting hemodynamic abnormalities(P=0.122).In the"gray zone"for hemodynamic abnormality,the diagnostic accuracy of MCP-FFR was 68.8％,whereas DeepCL-FFR increased it to 89.7％.DeepCL-FFR also exhibited superior diagnostic performance(AUC 0.89,95％CI 0.73-0.99)within the"gray zone,"which was significantly higher than that of MCP-FFR(AUC 0.71,95％CI 0.54-0.87)(P＜0.001).Conclusions The deep learning-driven coronary centerline extraction algorithm,DeepCL,demonstrates superior diagnostic performance in CT-FFR for detecting hemodynamic abnormalities,particularly by significantly improving diagnostic accuracy in the"gray zone."

Objective:To investigate the short-term clinical efficacy of implantation with a 3D-printed microporous titanium prosthesis in the treatment of large segmental infectious tibial defects.Methods:A retrospective analysis was conducted of the electronic medical records of the 47 patients with large segmental tibial defects who had been treated with 3D-printed microporous titanium prostheses at Department of Orthopaedics, 920th Hospital of Joint Logistics Support Force from January 2019 to February 2024. The cohort included 36 males and 11 females, with an age of (46.2±11.8) years and a mean bone defect length of 12.3 (8.0, 16.8) cm. In the 19 patients complicated with soft tissue defects, the area of soft tissue defects ranged from 10.0 cm × 6.0 cm to 33.0 cm × 10.0 cm. For the 28 patients without soft tissue defects at the lower leg, the bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage; for the 19 patients complicated with soft tissue defects, the soft tissue defects at the lower limb were repaired using an anterolateral thigh flap with vascular anastomosis at the same time when bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage. After infection control at 2 to 8 months after surgery, individualized 3D-printed microporous titanium prostheses were implanted at the second stage to reconstruct the bone defects. Postoperative observations included the patients' first standing time, crutch walking time, full weight-bearing time, osseointegration of the tibial fracture and the prosthesis, and complications during follow-up.Results:The follow-up period for the 47 patients was (34.7±14.3) months. The first standing time was (2.2±0.6) months, crutch walking time (3.8±1.1) months, and full weight-bearing time (5.3±1.2) for this cohort. The evaluation by the Paley's bone healing score resulted in 25 excellent cases, 18 good cases, 1 medium case, and 3 poor cases, giving an excellent and good rate of 91.5% (43/47). One year after operation, the X-ray films showed that the tibial fractures and prostheses were well integrated in the 43 patients. Two patients developed recurrent tibial infection which was responded to replacement of the vancomycin-loaded calcium sulfate spacer. The fixation screws for tibial prosthesis were broken in one patient, but no recurrence of infection was observed after revision. The overall incidence of complications was 6.4% (3/47).Conclusion:In the treatment of large segmental infectious tibial defects, by facilitating rapid functional recovery and ensuring a low incidence of complications, implantation with a 3D-printed microporous titanium prosthesis demonstrates fine short-term clinical efficacy.

In recent years, the abuse of antibiotics has led to antibiotic tolerance in the process of bacterial treatment, the morbidity and mortality caused by drug-resistant bacterial infection have further increased significantly. Drug delivery systems can be precisely designed to achieve controlled drug release, thereby reducing the risk of antibiotic toxicity and resistance, it is urgent to seek novel drug delivery systems to address the challenges posed by bacterial infections. This review first outlines the epidemic and prevention situation of bacterial infection, and further summarizes living microorganisms and their derivatives-based drug delivery systems, focusing on their natural characteristics such as surface specific proteins, physiological signal sensing, directed movement, and secretion of antibacterial substances, which show great potential in the treatment of bacterial infectious diseases by demonstrating their antibacterial effects. This review aims to provide ideas for the development of novel drug delivery systems based on living microorganisms and their derivatives for the treatment of bacterial infectious diseases.