Objective:To investigate the short-term clinical efficacy of implantation with a 3D-printed microporous titanium prosthesis in the treatment of large segmental infectious tibial defects.Methods:A retrospective analysis was conducted of the electronic medical records of the 47 patients with large segmental tibial defects who had been treated with 3D-printed microporous titanium prostheses at Department of Orthopaedics, 920th Hospital of Joint Logistics Support Force from January 2019 to February 2024. The cohort included 36 males and 11 females, with an age of (46.2±11.8) years and a mean bone defect length of 12.3 (8.0, 16.8) cm. In the 19 patients complicated with soft tissue defects, the area of soft tissue defects ranged from 10.0 cm × 6.0 cm to 33.0 cm × 10.0 cm. For the 28 patients without soft tissue defects at the lower leg, the bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage; for the 19 patients complicated with soft tissue defects, the soft tissue defects at the lower limb were repaired using an anterolateral thigh flap with vascular anastomosis at the same time when bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage. After infection control at 2 to 8 months after surgery, individualized 3D-printed microporous titanium prostheses were implanted at the second stage to reconstruct the bone defects. Postoperative observations included the patients' first standing time, crutch walking time, full weight-bearing time, osseointegration of the tibial fracture and the prosthesis, and complications during follow-up.Results:The follow-up period for the 47 patients was (34.7±14.3) months. The first standing time was (2.2±0.6) months, crutch walking time (3.8±1.1) months, and full weight-bearing time (5.3±1.2) for this cohort. The evaluation by the Paley's bone healing score resulted in 25 excellent cases, 18 good cases, 1 medium case, and 3 poor cases, giving an excellent and good rate of 91.5% (43/47). One year after operation, the X-ray films showed that the tibial fractures and prostheses were well integrated in the 43 patients. Two patients developed recurrent tibial infection which was responded to replacement of the vancomycin-loaded calcium sulfate spacer. The fixation screws for tibial prosthesis were broken in one patient, but no recurrence of infection was observed after revision. The overall incidence of complications was 6.4% (3/47).Conclusion:In the treatment of large segmental infectious tibial defects, by facilitating rapid functional recovery and ensuring a low incidence of complications, implantation with a 3D-printed microporous titanium prosthesis demonstrates fine short-term clinical efficacy.

Objective To investigate the association between gut microbiota metabolite,trimethy-lamine-N-oxide(TMAO),and total imaging burden in diabetic patients with cerebral small vessel disease(CSVD).Methods A prospective study was conducted on 112 elderly diabetic patients with CSVD admitted in our hospital from June 2022 to May 2024.According to the total imaging burden score,they were divided into a high burden group(burden score≥2,57 cases)and a low burden group(burden score＜2,55 cases).High-performance liquid chromatography with online electrospray ionization tandem mass spectrometry was applied to detect the plasma level of TMAO.Then based on the tertile of plasma TMAO level,the patients were also assigned into low(＜2.44 μmol/L,38 cases),median(2.44 μmol/L≤TMAO＜5.18 μmol/L,37 cases)and high TMAO(≥5.18 μmol/L,37 cases)groups.ROC curve analysis was used to assess the predictive value of plasma TMAO level for high imaging burden in diabetic patients with CSVD.Binary logistic regression analysis was employed to analyze the correlation between plasma TMAO level and high imaging burden.Results The high burden group exhibited significantly higher plasma TMAO level than the low burden group(P=0.002).The AUC value of plasma TMAO level in predicting high imaging burden was 0.669(95％CI:0.569-0.769,P=0.002).The percentage of high imaging burden was 34.2％,54.1％and 64.9％,respectively among the low,median and high TMAO groups,with significant differences among them(Chi-square=7.270,P=0.026).Binary logistic regression analysis indicated the correlation between TMAO and high imaging burden(OR=1.178,95％CI:1.019-1.364,P=0.027).Conclusion In elderly diabetic patients with CSVD,plasma TMAO level is closely associated with high imaging burden,with higher TMAO level,higher risk for high imaging burden.

OBJECTIVE: To analyze the effectiveness of single three-dimensional (3D)-printed microporous titanium prostheses and flap combined prostheses implantation in the treatment of large segmental infectious bone defects in limbs. METHODS: A retrospective analysis was conducted on the clinical data of 76 patients with large segmental infectious bone defects in limbs who were treated between January 2019 and February 2024 and met the selection criteria. Among them, 51 were male and 25 were female, with an age of (47.7±9.4) years. Of the 76 patients, 51 had no soft tissue defects (single prostheses group), while 25 had associated soft tissue defects (flap combined group). The single prostheses group included 28 cases of tibial bone defects, 11 cases of femoral defects, 5 cases of humeral defects, 4 cases of radial bone defects, and 3 cases of metacarpal, or carpal bone defects, with bone defect length ranging from 3.5 to 28.0 cm. The flap combined group included 3 cases of extensive dorsum of foot soft tissue defects combined with large segmental metatarsal bone defects, 19 cases of lower leg soft tissue defects combined with large segmental tibial bone defects, and 3 cases of hand and forearm soft tissue defects combined with metacarpal, carpal, or radial bone defects, with bone defect length ranging from 3.8 to 32.0 cm and soft tissue defect areas ranging from 8 cm×5 cm to 33 cm×10 cm. In the first stage, vancomycin-loaded bone cement was used to control infection, and flap repair was performed in the flap combined group. In the second stage, 3D-printed microporous titanium prostheses were implanted. Postoperative assessments were performed to evaluate infection control and bone integration, and pain release was evaluated using the visual analogue scale (VAS) score. RESULTS: All patients were followed up postoperatively, with an average follow-up time of (35.2±13.4) months. In the 61 lower limb injury patients, the time of standing, walk with crutches, and fully bear weight were (2.2±0.6), (3.9±1.1), and (5.4±1.1) months, respectively. The VAS score at 1 year postoperatively was significantly lower than preoperative one ( t=-10.678, P<0.001). At 1 year postoperatively, 69 patients (90.8%) showed no complication such as infection, fracture, prosthesis displacement, or breakage, and X-ray films indicated good integration at the prosthesis-bone interface. According to the Paley scoring system for the healing of infectious bone defects, the results were excellent in 37 cases, good in 29 cases, fair in 3 cases, and poor in 7 cases. In the single prostheses group, during the follow-up, there was 1 case each of femoral prostheses fracture, femoral infection, and tibial infection, with a treatment success rate of 94.1% (48/51). In lower limb injury patients, the time of fully bear weight was (5.0±1.0) months. In the flap combined group, during the follow-up, 1 case of tibial fixation prostheses screw fracture occurred, along with 2 cases of recurrent foot infection in diabetic patients and 1 case of tibial infection. The treatment success rate was 84.0% (21/25). The time of fully bear weight in lower limb injury patients was (5.8±1.2) months. The overall infection eradication rate for all patients was 93.4% (71/76). CONCLUSION The use of 3D-printed microporous titanium prostheses, either alone or in combination with flaps, for the treatment of large segmental infectious bone defects in the limbs results in good effectiveness with a low incidence of complications. It is a feasible strategy for the reconstruction of infectious bone defects.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Titanium ; Retrospective Studies ; Surgical Flaps ; Adult ; Prosthesis Implantation/methods* ; Plastic Surgery Procedures/methods* ; Treatment Outcome ; Prostheses and Implants ; Bone Diseases, Infectious/surgery* ; Extremities/surgery* ; Prosthesis Design

The application of sensors to the monitoring of spinal morphology and motion was reviewed in terms of the research object and monitoring index.The present situation of the application of sensors was introduced,such as inertial sensor,stretchable strain sensor and electromagnetic sensor.The deficiencies of sensors applied to the monitoring of spinal morphology and motion were analyzed,and the future directions of the application were pointed out.[Chinese Medical Equipment Journal,2025,46(6):105-110]

The application of sensors to the monitoring of spinal morphology and motion was reviewed in terms of the research object and monitoring index.The present situation of the application of sensors was introduced,such as inertial sensor,stretchable strain sensor and electromagnetic sensor.The deficiencies of sensors applied to the monitoring of spinal morphology and motion were analyzed,and the future directions of the application were pointed out.[Chinese Medical Equipment Journal,2025,46(6):105-110]

Objective To investigate the association between gut microbiota metabolite,trimethy-lamine-N-oxide(TMAO),and total imaging burden in diabetic patients with cerebral small vessel disease(CSVD).Methods A prospective study was conducted on 112 elderly diabetic patients with CSVD admitted in our hospital from June 2022 to May 2024.According to the total imaging burden score,they were divided into a high burden group(burden score≥2,57 cases)and a low burden group(burden score＜2,55 cases).High-performance liquid chromatography with online electrospray ionization tandem mass spectrometry was applied to detect the plasma level of TMAO.Then based on the tertile of plasma TMAO level,the patients were also assigned into low(＜2.44 μmol/L,38 cases),median(2.44 μmol/L≤TMAO＜5.18 μmol/L,37 cases)and high TMAO(≥5.18 μmol/L,37 cases)groups.ROC curve analysis was used to assess the predictive value of plasma TMAO level for high imaging burden in diabetic patients with CSVD.Binary logistic regression analysis was employed to analyze the correlation between plasma TMAO level and high imaging burden.Results The high burden group exhibited significantly higher plasma TMAO level than the low burden group(P=0.002).The AUC value of plasma TMAO level in predicting high imaging burden was 0.669(95％CI:0.569-0.769,P=0.002).The percentage of high imaging burden was 34.2％,54.1％and 64.9％,respectively among the low,median and high TMAO groups,with significant differences among them(Chi-square=7.270,P=0.026).Binary logistic regression analysis indicated the correlation between TMAO and high imaging burden(OR=1.178,95％CI:1.019-1.364,P=0.027).Conclusion In elderly diabetic patients with CSVD,plasma TMAO level is closely associated with high imaging burden,with higher TMAO level,higher risk for high imaging burden.

Objective:To investigate the short-term clinical efficacy of implantation with a 3D-printed microporous titanium prosthesis in the treatment of large segmental infectious tibial defects.Methods:A retrospective analysis was conducted of the electronic medical records of the 47 patients with large segmental tibial defects who had been treated with 3D-printed microporous titanium prostheses at Department of Orthopaedics, 920th Hospital of Joint Logistics Support Force from January 2019 to February 2024. The cohort included 36 males and 11 females, with an age of (46.2±11.8) years and a mean bone defect length of 12.3 (8.0, 16.8) cm. In the 19 patients complicated with soft tissue defects, the area of soft tissue defects ranged from 10.0 cm × 6.0 cm to 33.0 cm × 10.0 cm. For the 28 patients without soft tissue defects at the lower leg, the bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage; for the 19 patients complicated with soft tissue defects, the soft tissue defects at the lower limb were repaired using an anterolateral thigh flap with vascular anastomosis at the same time when bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage. After infection control at 2 to 8 months after surgery, individualized 3D-printed microporous titanium prostheses were implanted at the second stage to reconstruct the bone defects. Postoperative observations included the patients' first standing time, crutch walking time, full weight-bearing time, osseointegration of the tibial fracture and the prosthesis, and complications during follow-up.Results:The follow-up period for the 47 patients was (34.7±14.3) months. The first standing time was (2.2±0.6) months, crutch walking time (3.8±1.1) months, and full weight-bearing time (5.3±1.2) for this cohort. The evaluation by the Paley's bone healing score resulted in 25 excellent cases, 18 good cases, 1 medium case, and 3 poor cases, giving an excellent and good rate of 91.5% (43/47). One year after operation, the X-ray films showed that the tibial fractures and prostheses were well integrated in the 43 patients. Two patients developed recurrent tibial infection which was responded to replacement of the vancomycin-loaded calcium sulfate spacer. The fixation screws for tibial prosthesis were broken in one patient, but no recurrence of infection was observed after revision. The overall incidence of complications was 6.4% (3/47).Conclusion:In the treatment of large segmental infectious tibial defects, by facilitating rapid functional recovery and ensuring a low incidence of complications, implantation with a 3D-printed microporous titanium prosthesis demonstrates fine short-term clinical efficacy.

Objective:To identify the gene mutation types of 4 suspected β-thalassemia patients in Yunnan Province,and to analyze the genotypes and hematological phenotypes.Methods:Whole genome sequencing was performed on the samples of 4 suspected β-thalassemia patients from the Dai ethnic group in a thalassemia endemic area of Yunnan Province,whose hematological phenotypes were not consistent with the results of common thalassemia gene mutations.The mutations of β-globin gene clusters were confirmed by polymerase chain reaction(PCR)and Sanger DNA sequencing technology.Results:The 3.5 kb deletion in β-globin gene cluster(NC_000011.10:g.5224302-5227791 del3490bp)was detected in 4 patients'samples,of which 1 case was also detected with HbE mutation and 1 case with CD17 mutation.These 2 patients displayed moderate anemia phenotype,while the two patients with only the 3.5 kb deletion presented with other mild anemia phenotype.Conclusion:Heterozygous carriers with rare 3.5 kb deletion of the β-globin gene cluster may develop mild anemia,compound mutations of the 3.5 kb deletion with other mutations may led to intermediate thalasemia with moderate to sever anemia.In areas with a high incidence of thalassemia,suspected patients should undergo genetic testing to avoid missing or misdiagnosing rare mutations.

Objective This paper intends to compare the efficacy and safety of high-dose dual regimens containing Vonoprazan and proton pump inhibitor in patients infected with Helicobacter pylori(H.pylori).Methods A prospective randomized controlled study was conducted.According to inclusion and exclusion criteria.,243 patients with H.pylori infection admitted to the Department of Gastroenterology,the First Hospital of Lanzhou University from February 2023 to December 2023 were enrolled as the research objects.They were randomly divided into two groups.The high-dose dual therapy containing Vonoprazan group(VPZ-HDDT group)was given Vonoprazan fumarate tablet 20mg twice daily plus amoxicillin 750 mg four times daily for 14 days and the high-dose combination group containing PPI(PPI-HDDT group)was given esomeprazole 40 mg twice daily plus amoxicillin 750 mg four times daily for 14 days.Patients were followed up and recorded by telephone or WeChat on the 7th and 14th day of starting treatment for drug intake and occurrence of adverse reactions.Patients were instructed to recheck the 13C or 14C urea breath test at least 1 month after the end of medication.Treatment by protocol(PP)analysis,modified intention to treat(mITT)and intention-to-treat(ITT)analysis were used for H.pylori eradication rates in both groups,and compliance and incidence of adverse reactions were compared between the two groups.Results The eradication rates of the VPZ-HDDT group and the PPI-HDDT group in the initial treatment were 94.0％and 88.5％(P=0.209)by PP analysis,and 91.8％and 87.5％(P=0.358)86.7％by mITT analysis,and 81.9％(P=0.377)by ITT analysis,respectively.In the retreated patients,the PP analysis and mITT analysis eradication rates in these two groups were consistent,87.0％and 84.2％(P=0.800),respectively,and 83.3％and 76.2％(P=0.550)by ITT analysis.For the refractory H.pylori patients,the PP analysis and mITT analysis eradication rates in these two groups were also consistent,71.4％and 50.0％(P=0.429),and the eradication rates of ITT analysis were 62.5％and 50.0％(P=0.640),respectively.In different stratifications,the eradication rates of the VPZ-HDDT group were higher than those of the PPI-HDDT group,but the differences were not statistically significant.The incidence of adverse reactions and compliance of the VPZ-HDDT group and the PPI-HDDT group were similar,with no statistically significant differences.Conclusion Both two combination regimens can achieve clinically acceptable eradication rates(＞85％)in the first-time treatment patients.For the retreated and refractory patients,the choice of vonoprazan is more beneficial.

To address the issue of peak loss when applying variational mode decomposition(VMD)to denoise spectra with sharp peaks,in this study,a method for spectral signal denoising of complex samples called peak extraction variational mode decomposition(PE-VMD)was introduced.Firstly,the spectral signal was subjected to a process of denoising utilising the VMD algorithm.Next,the first order derivatives of the spectral signals were calculated to determine the peak center.Subsequently,the second order derivatives of the spectral signal was calculated to extract the sharp peaks with high signal-to-noise ratio(SNR).Finally,the peak intercepted that lose information after VMD denoising were removed,and the remaining spectrum was sequentially connected with the extracted sharp peaks to obtain the final denoised spectrum.The effectiveness of the method was evaluated by one of simulated signals and X-ray diffraction(XRD)spectrum of MnCo-ISAs/CN catalysts.Furthermore,the method was compared with other denoising techniques,including Savitzky-Golay(SG)smoothing,empirical mode decomposition(EMD)and VMD.The efficacy of the denoising process was then assessed by analyzing the spectrograms and signal-to-noise ratio before and after denoising.The results demonstrated that PE-VMD denoising achieved the greatest SNR and effectively preserved the essential information of the spectral signals.Consequently,PE-VMD exhibited superior denoising capability for spectra with sharp peaks.