To explore the advantages of traditional Chinese medicine （TCM） and integrative TCM-Western medicine approaches in the treatment of diabetic microvascular complications （DMC）， refine key pathophysiological insights and treatment principles， and promote academic innovation and strategic research planning in the prevention and treatment of DMC. The 38th session of the Expert Salon on Diseases Responding Specifically to Traditional Chinese Medicine， hosted by the China Association of Chinese Medicine， was held in Beijing， 2024. Experts in TCM， Western medicine， and interdisciplinary fields convened to conduct a systematic discussion on the pathogenesis， diagnostic and treatment challenges， and mechanism research related to DMC， ultimately forming a consensus on key directions. Four major research recommendations were proposed. The first is addressing clinical bottlenecks in the prevention and control of DMC by optimizing TCM-based evidence evaluation systems. The second is refining TCM core pathogenesis across DMC stages and establishing corresponding "disease-pattern-time" framework. The third is innovating mechanism research strategies to facilitate a shift from holistic regulation to targeted intervention in TCM. The fourth is advancing interdisciplinary collaboration to enhance the role of TCM in new drug development， research prioritization， and guideline formulation. TCM and integrative approaches offer distinct advantages in managing DMC. With a focus on the diseases responding specifically to TCM， strengthening evidence-based support and mechanism interpretation and promoting the integration of clinical care and research innovation will provide strong momentum for the modernization of TCM and the advancement of national health strategies.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Pyroptosis is an identified programmed cell death that has been highly linked to endoplasmic reticulum (ER) dynamics. However, the crucial proteins for modulating dynamic ER membrane curvature change that trigger pyroptosis are currently not well understood. In this study, a biotin-labeled chemical probe of potent pyroptosis inducer α-mangostin (α-MG) was synthesized. Through protein microarray analysis, reticulon-4 (RTN4/Nogo), a crucial regulator of ER membrane curvature, was identified as a target of α-MG. We observed that chemically induced proteasome degradation of RTN4 by α-MG through recruiting E3 ligase UBR5 significantly enhances the pyroptosis phenotype in cancer cells. Interestingly, the downregulation of RTN4 expression significantly facilitated a dynamic remodeling of ER membrane curvature through a transition from tubules to sheets, consequently leading to rapid fusion of the ER with the cell plasma membrane. In particular, the ER-to-plasma membrane fusion process is supported by the observed translocation of several crucial ER markers to the "bubble" structures of pyroptotic cells. Furthermore, α-MG-induced RTN4 knockdown leads to pyruvate kinase M2 (PKM2)-dependent conventional caspase-3/gasdermin E (GSDME) cleavages for pyroptosis progression. In vivo, we observed that chemical or genetic RTN4 knockdown significantly inhibited cancer cells growth, which further exhibited an antitumor immune response with anti-programmed death-1 (anti-PD-1). In translational research, RTN4 high expression was closely correlated with the tumor metastasis and death of patients. Taken together, RTN4 plays a fundamental role in inducing pyroptosis through the modulation of ER membrane curvature remodeling, thus representing a prospective druggable target for anticancer immunotherapy.
Pyroptosis/immunology* ; Humans ; Endoplasmic Reticulum/immunology* ; Animals ; Nogo Proteins/antagonists & inhibitors* ; Mice ; Cell Line, Tumor ; Xanthones/pharmacology* ; Neoplasms/pathology* ; Mice, Nude

OBJECTIVE: Observational studies have found associations between inflammatory bowel disease (IBD) and the risk of dementia, including Alzheimer's dementia (AD) and vascular dementia (VD); however, these findings are inconsistent. It remains unclear whether these associations are causal. METHODS: We conducted a meta-analysis by systematically searching for observational studies on the association between IBD and dementia. Mendelian randomization (MR) analysis based on summary genome-wide association studies (GWASs) was performed. Genetic correlation and Bayesian co-localization analyses were used to provide robust genetic evidence. RESULTS: Ten observational studies involving 80,565,688 participants were included in this meta-analysis. IBD was significantly associated with dementia (risk ratio [ RR] =1.36, 95% CI = 1.04-1.78; I ² = 84.8%) and VD ( RR = 2.60, 95% CI = 1.18-5.70; only one study), but not with AD ( RR = 2.00, 95% CI = 0.96-4.13; I ² = 99.8%). MR analyses did not supported significant causal associations of IBD with dementia (dementia: odds ratio [ OR] = 1.01, 95% CI = 0.98-1.03; AD: OR = 0.98, 95% CI = 0.95-1.01; VD: OR = 1.02, 95% CI = 0.97-1.07). In addition, genetic correlation and co-localization analyses did not reveal any genetic associations between IBD and dementia. CONCLUSION Our study did not provide genetic evidence for a causal association between IBD and dementia risk. The increased risk of dementia observed in observational studies may be attributed to unobserved confounding factors or detection bias.
Humans ; Mendelian Randomization Analysis ; Inflammatory Bowel Diseases/complications* ; Dementia/etiology* ; Observational Studies as Topic ; Genome-Wide Association Study

OBJECTIVE: This study reports the first imported case of Lassa fever (LF) in China. Laboratory detection and molecular epidemiological analysis of the Lassa virus (LASV) from this case offer valuable insights for the prevention and control of LF. METHODS: Samples of cerebrospinal fluid (CSF), blood, urine, saliva, and environmental materials were collected from the patient and their close contacts for LASV nucleotide detection. Whole-genome sequencing was performed on positive samples to analyze the genetic characteristics of the virus. RESULTS: LASV was detected in the patient's CSF, blood, and urine, while all samples from close contacts and the environment tested negative. The virus belongs to the lineage IV strain and shares the highest homology with strains from Sierra Leone. The variability in the glycoprotein complex (GPC) among different strains ranged from 3.9% to 15.1%, higher than previously reported for the seven known lineages. Amino acid mutation analysis revealed multiple mutations within the GPC immunogenic epitopes, increasing strain diversity and potentially impacting immune response. CONCLUSION The case was confirmed through nucleotide detection, with no evidence of secondary transmission or viral spread. The LASV strain identified belongs to lineage IV, with broader GPC variability than previously reported. Mutations in the immune-related sites of GPC may affect immune responses, necessitating heightened vigilance regarding the virus.
Humans ; China/epidemiology* ; Genome, Viral ; Lassa Fever/virology* ; Lassa virus/classification* ; Molecular Epidemiology ; Phylogeny

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

This study established a high performance liquid chromatography(HPLC) fingerprint of Chuanxiong Rhizoma from different producing areas and screened its potential differential components for producing areas by chemometrics. Furthermore, the content of the above differential components in Chuanxiong Rhizoma from different producing areas was measured and compared. Then, the geoherbalism markers(geo-markers) that can be used to distinguish Dao-di and non-Dao-di Chuanxiong Rhizoma were excavated by chemometrics. In fingerprint studies, a total of 27 common peaks were determined, and the fingerprint similarity for 37 batches of Chuanxiong Rhizoma samples from different producing areas was above 0.968. The orthogonal partial least squares-discriminant analysis(OPLS-DA) was capable of distinguishing Chuanxiong Rhizoma from Sichuan and from three other provinces, as well as Dao-di Chuanxiong Rhizoma(from Dujiangyan) and non-Dao-di Chuanxiong Rhizoma(from other producing areas) in Sichuan province. Meanwhile, 14 potential differential components in Chuanxiong Rhizoma from different provinces and 16 potential differential components in Chuanxiong Rhizoma from different producing areas in Sichuan were screened by the variable importance in projection(VIP) analysis under OPLS-DA. The reference standards were used to identify 10 potential differential components in the common peaks, and subsequent content determination verified that the content of the above 10 potential differential components was different among different producing areas. Then, the OPLS-DA and VIP analysis were performed with the content of the 10 potential differential components as variables. The results showed that Z-ligustilide, chlorogenic acid, and the ratio of butylidenephthalide/senkyunolide A were the geo-markers that can distinguish Chuanxiong Rhizoma from Sichuan and Chuanxiong Rhizoma from Shaanxi, Hebei, and Jiangxi, while Z-ligustilide, n-butylphthalide, and the ratios of Z-ligustilide/senkyunolide A and butylidenephthalide/senkyunolide A were the geo-markers that can distinguish Dao-di Chuanxiong Rhizoma(from Dujiangyan) and non-Dao-di Chuanxiong Rhizoma(from other producing areas) in Sichuan province. This study elucidated the differences in material basis of Dao-di and non-Dao-di Chuanxiong Rhizoma based on fingerprinting and content determination combined with chemometrics, which provides a reference for the study of material basis of Dao-di traditional Chinese medicine.
Drugs, Chinese Herbal/chemistry* ; Rhizome/chemistry* ; Chromatography, High Pressure Liquid/methods* ; Chemometrics/methods* ; Quality Control

Diabetic foot (DF) is one of the most serious chronic complications of diabetes. The incidence rate among global diabetes patients is as high as 15% to 25%, and about 50% of patients will develop contralateral foot ulcers within 5 years after the first unilateral ulcer. As a non-invasive prevention and control solution, the application progress of functional insoles is mainly reflected in the following aspects:(1) Material innovation. The application of new composite materials and smart materials has significantly enhanced the pressure reduction effect and comfort. (2) Structural optimization. The development of multi-layer design and local pressure reduction structure has achieved more precise pressure distribution regulation. (3) Manufacturing process. 3D printing and parametric design have enabled the personalized customization of functional insoles. (4) Intelligent monitoring. It integrates functions such as pressure sensing and temperature monitoring, achieving real-time monitoring and early warning of foot conditions. Clinical research has confirmed that personalized functional insoles could reduce the incidence of foot ulcers and shorten the healing time of ulcers. At present, the research hotspots mainly focus on the development of smart materials, the construction of multi-functional integration and remote monitoring systems. However, in-depth research is still needed in the aspects of biomechanical mechanisms, standardized evaluation systems and long-term efficacy assessment. The development of future functional insoles should focus on the coordinated advancement of "personalization-intelligence-standardization", with the aim of providing more effective solutions for the prevention and treatment of DF.
Humans ; Diabetic Foot/therapy* ; Foot Orthoses