The application area of biportal endoscopic spine surgery (BESS) is gradually expanding. Compared with conventional fusion surgery, transforaminal interbody fusion (TLIF) using BESS (BESS-TLIF) has the advantages of less bleeding, minimal postoperative pain, and faster recovery. This technical note highlights its application in managing complex conditions such as scar tissue adhesion, altered anatomy, and implant removal, common in reoperations. The method focuses on precise dissection, endoscopic visualization, and careful tissue handling to ensure effective decompression and stabilization. Three representative cases, including reoperations for recurrent disc herniation, adjacent segment disease (ASD) following prior fusion, and ASD with nonunion of the prior fusion site requiring fusion extension, were described. All three cases exhibited clinical improvement following surgery. BESS is an effective and safe method for spinal revision surgery not only in simple decompression surgery but also in cases that required fusion surgery. As BESS is advancing, its role in complex spinal surgeries is expected to expand, potentially setting new standards in minimally invasive spine surgery.

Purpose: Proximal gastrectomy is an alternative to total gastrectomy (TG) for early gastric cancer (EGC) treatment in the upper stomach. However, its benefits in terms of perioperative and long-term outcomes remain controversial. The aim of this study was to compare the perioperative, body compositional, nutritional, and survival outcomes of patients undergoing proximal gastrectomy with double-tract reconstruction (PG-DTR) and TG for pathological stage I gastric cancer in upper stomach. Materials and Methods: The study included 506 patients who underwent gastrectomy for pathological stage I gastric cancer in the upper stomach between 2015 and 2019. Clinicopathological, perioperative, body compositional, nutritional, and survival outcomes were compared between the PG-DTR and TG groups. Results: The PG-DTR and TG groups included 197 (38.9%) and 309 (61.1%) patients, respectively. The PG-DTR group had a lower rate of early complications (p=0.041), lower diagnosis rate of anemia and vitamin B12 deficiency (all p < 0.001), and lower replacement rate of iron and vitamin B12 compared to TG group (all p < 0.001). The PG-DTR group showed reduced incidence of sarcopenia at 6-months postoperatively, preserved higher amount of visceral fat after surgery (p=0.032 and p=0.040, respectively), and showed a higher hemoglobin level (p=0.007). Oncologic outcomes were comparable between the groups. Conclusion The PG-DTR for EGC located in the upper stomach offered advantages of fewer complications, lower incidence of anemia and vitamin B12 deficiency, less decrease in visceral fat volume, and similar survival compared to TG. Consequently, PG-DTR may be considered a superior alternative treatment option to TG.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Background: Factors influencing the decline in forced expiratory volume in one second (FEV1 )/forced vital capacity (FVC) for chronic obstructive pulmonary disease (COPD) progression remain uncertain. We aimed to identify risk factors associated with rapid FEV1 / FVC decline in patients with COPD. Methods: This multi-center observational study was conducted from January 2012 to December 2022. Eligible patients were monitored with symptoms, spirometric tests, and treatment patterns over 3 years. Rapid FEV1 /FVC decliners were defined as the quartile of patients exhibiting the highest annualized percentage decline in FEV1 /FVC. Results: Among 1,725 patients, 435 exhibited rapid FEV1 /FVC decline, with an annual change of −2.5%p (interquartile range, −3.5 to −2.0). Rapid FEV1 /FVC decliners exhibited lower body mass index (BMI), higher smoking rates, elevated post-bronchodilator (BD) FEV1 , higher post-BD FEV1 / FVC, and a lower prevalence of Staging of Airflow Obstruction by Ratio (STAR) stage IV. Rapid FEV1 /FVC decline was not linked to the annual exacerbation rate, but there was an association with symptom deterioration and FEV1 decline. In multivariable analyses, low BMI, current smoking, increased modified Medical Research Council dyspnoea score, low post-BD FEV1 , low STAR stage, high forced mid-expiratory flow (FEF 25-75% ), accelerated FEV1 decline, and not initiating dual BD therapy were identified as independent risk factors for rapid FEV1 /FVC decline. Conclusion We identified the risk factors for rapid FEV1 /FVC decline, including BMI, smoking, symptoms deterioration, FEV1 decline, and adherence to standard inhaler treatment. Our findings underscore the potential benefits of maintaining consistent use of long-acting beta-agonist/long-acting muscarinic antagonist even in the presence of worsening symptoms, in attenuating FEV1 /FVC decline.

Background: Factors influencing the decline in forced expiratory volume in one second (FEV1 )/forced vital capacity (FVC) for chronic obstructive pulmonary disease (COPD) progression remain uncertain. We aimed to identify risk factors associated with rapid FEV1 / FVC decline in patients with COPD. Methods: This multi-center observational study was conducted from January 2012 to December 2022. Eligible patients were monitored with symptoms, spirometric tests, and treatment patterns over 3 years. Rapid FEV1 /FVC decliners were defined as the quartile of patients exhibiting the highest annualized percentage decline in FEV1 /FVC. Results: Among 1,725 patients, 435 exhibited rapid FEV1 /FVC decline, with an annual change of −2.5%p (interquartile range, −3.5 to −2.0). Rapid FEV1 /FVC decliners exhibited lower body mass index (BMI), higher smoking rates, elevated post-bronchodilator (BD) FEV1 , higher post-BD FEV1 / FVC, and a lower prevalence of Staging of Airflow Obstruction by Ratio (STAR) stage IV. Rapid FEV1 /FVC decline was not linked to the annual exacerbation rate, but there was an association with symptom deterioration and FEV1 decline. In multivariable analyses, low BMI, current smoking, increased modified Medical Research Council dyspnoea score, low post-BD FEV1 , low STAR stage, high forced mid-expiratory flow (FEF 25-75% ), accelerated FEV1 decline, and not initiating dual BD therapy were identified as independent risk factors for rapid FEV1 /FVC decline. Conclusion We identified the risk factors for rapid FEV1 /FVC decline, including BMI, smoking, symptoms deterioration, FEV1 decline, and adherence to standard inhaler treatment. Our findings underscore the potential benefits of maintaining consistent use of long-acting beta-agonist/long-acting muscarinic antagonist even in the presence of worsening symptoms, in attenuating FEV1 /FVC decline.

Background: and Purpose This study evaluated the diagnostic utility of an anti-signal-recognition particle 54 (anti-SRP54) antibody-based enzyme-linked immunosorbent assay (ELISA) as well as the clinical, serological, and pathological characteristics of patients with SRP immune-mediated necrotizing myopathy (IMNM). Methods: We evaluated 87 patients with idiopathic inflammatory myopathy and 107 healthy participants between January 2002 and December 2023. The sensitivity and specificity of the ELISA for anti-SRP54 antibodies were assessed, and the clinical profiles of patients with antiSRP54 antibodies were determined. Results: The ELISA for anti-SRP54 antibodies had a sensitivity and specificity of 88% and 99%, respectively, along with a test–retest reliability of 0.92 (p<0.001). The 32 patients diagnosed with anti-SRP IMNM using a line-blot immunoassay included 28 (88%) who tested positive for anti-SRP54 antibodies using the ELISA, comprising 12 (43%) males and 16 (57%) females whose median ages at symptom onset and diagnosis were 43.0 years and 43.5 years, respectively. Symptoms included proximal muscle weakness in all 28 (100%) patients, neck weakness in 9 (32%), myalgia in 15 (54%), dysphagia in 5 (18%), dyspnea in 4 (14%), dysarthria in 2 (7%), interstitial lung disease in 2 (7%), and myocarditis in 2 (7%). The median serum creatine kinase (CK) level was 7,261 U/L (interquartile range: 5,086–10,007 U/L), and the median anti-SRP54 antibody level was 2.0 U/mL (interquartile range: 1.0–5.6 U/mL). The serum CK level was significantly higher in patients with coexisting anti-Ro-52 antibodies. Conclusions This study has confirmed the reliability of the ELISA for anti-SRP54 antibodies and provided insights into the clinical, serological, and pathological characteristics of South Korean patients with anti-SRP IMNM.

Purpose: The novel curability criteria for elderly (EL) patients have been proposed to stratify their risk of lymph node metastasis (LNM), following non-curative endoscopic submucosal dissection (ESD) for early gastric cancer (EGC). Hence, this study aimed to evaluate the effectiveness of the EL criteria and compare them with those of the well-known eCura system. Materials and Methods: A retrospective analysis was performed on 143 patients who did not meet the curative ESD criteria at a tertiary hospital in Korea between 2011 and 2022. Of these, 102 underwent additional surgery, while 41 were followed up without further treatment. The LNM rates based on the EL and eCura systems were stratified and compared. Results: In the surgery group, 29.4% (30/102) patients were classified as EL-low (EL-L) and 70.2% (72/102) as EL-high (EL-H). The LNM rates (95% confidence interval) were 0.0% (0.0–11.6) and 9.7% (4.0–19.0) for EL-L and EL-H, respectively (P=0.102). EL-L was closely aligned with the eCura low-risk category, with a similar patient proportion (32.4%) and an LNM rate of 0.0% (0.0–10.6). The eCura system classified 94.1% (48/51) of the EL-L patients as lowrisk, with an 86% concordance rate (123/143). Discordant cases included patients with positive vertical margins, but without other risk factors, who were classified as EL-H without LNM. Conclusions Patients with EL-L showed no LNM, and the EL criteria demonstrated high concordance with the eCura system. The EL criteria may be as effective as the eCura system in identifying low-risk patients after non-curative ESD for EGC.

Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.