Purpose: The aim of this study is to compare the detection ability of quality of life (QoL) changes and responsiveness of the KOrean QUality of life in Stomach cancer patients Study group (KOQUSS)-40 and European Organization for Research and Treatment of Cancer Quality of Life Questionnaire (EORTC QLQ). Materials and Methods: A multicenter prospective observational study was conducted to evaluate QoL changes after various gastrectomies between January 2021 and April 2022. Participants were instructed to complete the KOQUSS-40 and EORTC QLQ-C30/STO22 preoperatively and at 1, 3, 6, and 12 months postoperatively. QoL changes over time and QoL responsiveness were assessed for each questionnaire. Results: Data from 491 patients who underwent curative gastrectomy for gastric cancer at 22 institutions were analyzed. The summary scores of the KOQUSS-40 and EORTC QLQ-STO22 showed significant differences between the total and proximal gastrectomy groups (p=0.044 and p=0.038, respectively), but no difference was observed for the EORTC QLQ-C30. Dysphagia on the KOQUSS-40 was significantly different between the total and proximal gastrectomy groups (p=0.031); however, dysphagia on the EORTC QLQ-STO22 did not differ. The responsiveness of the KOQUSS-40 was similar to that of the EORTC QLQ in patients who experienced ≥ 10% body weight loss, but approximately 10% less in patients receiving adjuvant chemotherapy than the EORTC QLQ. Conclusion KOQUSS-40 has several advantages over EORTC QLQ-C30/STO22 when comparing QoL between the total and proximal gastrectomy groups. The findings provide information for researchers investigating the QoL of patients who have undergone curative gastrectomy for gastric cancer.

Objective: This study compared clinical and cosmetic outcomes of cranioplasty using customized three-dimensional (3-D) printed implants versus autologous bone in patients with aneurysmal subarachnoid hemorrhage (aSAH) after decompressive craniectomy (DC). Methods: We retrospectively reviewed 50 patients who underwent cranioplasty after DC for aSAH between July 2018 and December 2023. Patients were divided into the three-dimensional cranioplasty(3-DC, n=26) and autologous bone cranioplasty (AC, n=24) groups. Demographics, aneurysm characteristics, surgical parameters, morphometric analysis of defect coverage, complications, and functional outcomes assessed by the modified Rankin Scale (mRS) were compared. Results: A total of 54 hemispheres underwent cranioplasty. Compared with AC, the 3-DC group had larger defects but achieved higher coverage (96.7% vs. 93.4%, p=0.044) and smaller residual defects (338.7±274.2 mm² vs. 528.5±331.3 mm², p=0.049). Complication rates were lower in 3-DC (9 cases) than AC (15 cases, p=0.0994). Wound dehiscence and fluid collection were more frequent with 3-DC, while bone flap resorption and epidural abscess occurred only with AC. Revision surgery was required in six patients, five initially treated with autologous bone. Neurological outcomes (mRS) were maintained or improved in both groups. Conclusions In aSAH patients undergoing cranioplasty after DC, customized 3-D printed implants achieved significantly better anatomical restoration and showed a numerical trend toward fewer complications compared with autologous bone. While AC remains feasible, its risks of resorption and infection often necessitate revision. 3-D printed implants may be considered a reasonable alternative, particularly in aSAH patients at higher risk of complications.

For patients with edentulous maxillae, creating a prosthetic treatment plan involves considering anatomical factors, aesthetics, the patient’s financial situation, and oral hygiene capabilities. In this case, CAD-CAM technology was used to accurately plan implant placements for a full arch fixed restoration based on the design of the final prosthesis. A customized surgical guide ensured precise implant placement and a provisional restoration was created using CAD-CAM. The definitive prosthesis was then created based on the second provisional restoration that has been previously used and adjusted by the patient. This approach achieved an excellent functional and aesthetic outcome, highlighting the benefits of digital approach and its potential for further clinical applications.

Purpose: Several types of dermal fillers have been recently introduced and used for penile augmentation (PA). However, few studies have compared outcomes after the injection of different fillers. This study aimed to compare the clinical outcomes of hyaluronic acid (HLA), polylactic acid (PLA), and polymethyl methacrylate (PMA) filler injections, which are the most commonly used for aesthetic purposes. Materials and Methods: This prospective study was conducted for 24 weeks after a filler injection by a surgeon between March 2017 and December 2021. Healthy adult men complaining of small penis were enrolled. Penile girth, satisfaction, and injection-associated adverse events (AEs) were assessed at baseline and 4, 12, and 24 weeks after injection. Results: Of the 301 men who received filler injections, 125, 134, and 42 received HLA, PLA, and PMA fillers, respectively. The augmentation effect was in the order of PMA, HLA, and PLA, respectively, at 24 weeks (PMA vs. HLA, p<0.001; HLA vs. PLA, p=0.006). Satisfaction levels increased significantly at 24 weeks in all groups (each with p<0.001). However, the increase in satisfaction levels was smaller in the PMA group (PMA vs. HLA or PLA, p<0.05, for both penile appearance and sexual life). No serious or systemic AEs were recorded. Filler injection-associated local AEs in the HLA, PLA, and PMA groups occurred in 9 (7.2%), 16 (11.9%), and 6 (14.3%) men, respectively. There was no significant difference in AEs among the groups (p=0.299). Conclusions The augmentative effect was greater in the PMA group than in the HLA and PLA groups, whereas the increase in satisfaction levels was smaller in the PMA group. Our study demonstrated the clinical course of different types of fillers and suggests that the filler type should be selected after detailed counseling considering individual characteristics and preferences.

For patients with edentulous maxillae, creating a prosthetic treatment plan involves considering anatomical factors, aesthetics, the patient’s financial situation, and oral hygiene capabilities. In this case, CAD-CAM technology was used to accurately plan implant placements for a full arch fixed restoration based on the design of the final prosthesis. A customized surgical guide ensured precise implant placement and a provisional restoration was created using CAD-CAM. The definitive prosthesis was then created based on the second provisional restoration that has been previously used and adjusted by the patient. This approach achieved an excellent functional and aesthetic outcome, highlighting the benefits of digital approach and its potential for further clinical applications.

For patients with edentulous maxillae, creating a prosthetic treatment plan involves considering anatomical factors, aesthetics, the patient’s financial situation, and oral hygiene capabilities. In this case, CAD-CAM technology was used to accurately plan implant placements for a full arch fixed restoration based on the design of the final prosthesis. A customized surgical guide ensured precise implant placement and a provisional restoration was created using CAD-CAM. The definitive prosthesis was then created based on the second provisional restoration that has been previously used and adjusted by the patient. This approach achieved an excellent functional and aesthetic outcome, highlighting the benefits of digital approach and its potential for further clinical applications.

Purpose: Several types of dermal fillers have been recently introduced and used for penile augmentation (PA). However, few studies have compared outcomes after the injection of different fillers. This study aimed to compare the clinical outcomes of hyaluronic acid (HLA), polylactic acid (PLA), and polymethyl methacrylate (PMA) filler injections, which are the most commonly used for aesthetic purposes. Materials and Methods: This prospective study was conducted for 24 weeks after a filler injection by a surgeon between March 2017 and December 2021. Healthy adult men complaining of small penis were enrolled. Penile girth, satisfaction, and injection-associated adverse events (AEs) were assessed at baseline and 4, 12, and 24 weeks after injection. Results: Of the 301 men who received filler injections, 125, 134, and 42 received HLA, PLA, and PMA fillers, respectively. The augmentation effect was in the order of PMA, HLA, and PLA, respectively, at 24 weeks (PMA vs. HLA, p<0.001; HLA vs. PLA, p=0.006). Satisfaction levels increased significantly at 24 weeks in all groups (each with p<0.001). However, the increase in satisfaction levels was smaller in the PMA group (PMA vs. HLA or PLA, p<0.05, for both penile appearance and sexual life). No serious or systemic AEs were recorded. Filler injection-associated local AEs in the HLA, PLA, and PMA groups occurred in 9 (7.2%), 16 (11.9%), and 6 (14.3%) men, respectively. There was no significant difference in AEs among the groups (p=0.299). Conclusions The augmentative effect was greater in the PMA group than in the HLA and PLA groups, whereas the increase in satisfaction levels was smaller in the PMA group. Our study demonstrated the clinical course of different types of fillers and suggests that the filler type should be selected after detailed counseling considering individual characteristics and preferences.

Purpose: Several types of dermal fillers have been recently introduced and used for penile augmentation (PA). However, few studies have compared outcomes after the injection of different fillers. This study aimed to compare the clinical outcomes of hyaluronic acid (HLA), polylactic acid (PLA), and polymethyl methacrylate (PMA) filler injections, which are the most commonly used for aesthetic purposes. Materials and Methods: This prospective study was conducted for 24 weeks after a filler injection by a surgeon between March 2017 and December 2021. Healthy adult men complaining of small penis were enrolled. Penile girth, satisfaction, and injection-associated adverse events (AEs) were assessed at baseline and 4, 12, and 24 weeks after injection. Results: Of the 301 men who received filler injections, 125, 134, and 42 received HLA, PLA, and PMA fillers, respectively. The augmentation effect was in the order of PMA, HLA, and PLA, respectively, at 24 weeks (PMA vs. HLA, p<0.001; HLA vs. PLA, p=0.006). Satisfaction levels increased significantly at 24 weeks in all groups (each with p<0.001). However, the increase in satisfaction levels was smaller in the PMA group (PMA vs. HLA or PLA, p<0.05, for both penile appearance and sexual life). No serious or systemic AEs were recorded. Filler injection-associated local AEs in the HLA, PLA, and PMA groups occurred in 9 (7.2%), 16 (11.9%), and 6 (14.3%) men, respectively. There was no significant difference in AEs among the groups (p=0.299). Conclusions The augmentative effect was greater in the PMA group than in the HLA and PLA groups, whereas the increase in satisfaction levels was smaller in the PMA group. Our study demonstrated the clinical course of different types of fillers and suggests that the filler type should be selected after detailed counseling considering individual characteristics and preferences.

For patients with edentulous maxillae, creating a prosthetic treatment plan involves considering anatomical factors, aesthetics, the patient’s financial situation, and oral hygiene capabilities. In this case, CAD-CAM technology was used to accurately plan implant placements for a full arch fixed restoration based on the design of the final prosthesis. A customized surgical guide ensured precise implant placement and a provisional restoration was created using CAD-CAM. The definitive prosthesis was then created based on the second provisional restoration that has been previously used and adjusted by the patient. This approach achieved an excellent functional and aesthetic outcome, highlighting the benefits of digital approach and its potential for further clinical applications.

Purpose: Several types of dermal fillers have been recently introduced and used for penile augmentation (PA). However, few studies have compared outcomes after the injection of different fillers. This study aimed to compare the clinical outcomes of hyaluronic acid (HLA), polylactic acid (PLA), and polymethyl methacrylate (PMA) filler injections, which are the most commonly used for aesthetic purposes. Materials and Methods: This prospective study was conducted for 24 weeks after a filler injection by a surgeon between March 2017 and December 2021. Healthy adult men complaining of small penis were enrolled. Penile girth, satisfaction, and injection-associated adverse events (AEs) were assessed at baseline and 4, 12, and 24 weeks after injection. Results: Of the 301 men who received filler injections, 125, 134, and 42 received HLA, PLA, and PMA fillers, respectively. The augmentation effect was in the order of PMA, HLA, and PLA, respectively, at 24 weeks (PMA vs. HLA, p<0.001; HLA vs. PLA, p=0.006). Satisfaction levels increased significantly at 24 weeks in all groups (each with p<0.001). However, the increase in satisfaction levels was smaller in the PMA group (PMA vs. HLA or PLA, p<0.05, for both penile appearance and sexual life). No serious or systemic AEs were recorded. Filler injection-associated local AEs in the HLA, PLA, and PMA groups occurred in 9 (7.2%), 16 (11.9%), and 6 (14.3%) men, respectively. There was no significant difference in AEs among the groups (p=0.299). Conclusions The augmentative effect was greater in the PMA group than in the HLA and PLA groups, whereas the increase in satisfaction levels was smaller in the PMA group. Our study demonstrated the clinical course of different types of fillers and suggests that the filler type should be selected after detailed counseling considering individual characteristics and preferences.