Objective:To investigate the effect of Simiao Yong'an Decoction on AMPK/ULK1 autophagy axis and inflammatory reaction in atherosclerotic(AS)mice.Methods:ApoE-/-mice were randomly divided into control group,model group,low,medium and high doses of Simiao Yong'an Decoction groups and simvastatin group,with 10 mice in each group.Mice model of AS was induced by high-fat diet.Simao Yong'an Decoction given low(10.13 g/kg),medium(20.25 g/kg),high dose(40.5 g/kg)and simvastatin tablets(3 mg/kg)by gavage for 6 weeks.After administration,serum and aortic tissue of mice were collected,and serum lipid level was detected by automatic biochemical analyzer;HE staining was used to observe the pathological changes of aorta;autophagy level of plaque tissue was observed by transmission electron microscope;levels of inflammatory factors IL-18,IFN-γ and CRP in serum were detected by ELISA;expression levels of AMPK,ULK1 and p62 mRNA were detected by qRT-PCR;expressions of LC3Ⅱ and p-ULK1 protein were detected by immunofluorescence labeling;expressions of p-AMPK and p62 were detected by immunohistochemis-try.Results:Compared with model group,aortic plaque in Simiao Yong'an Decoction and simvastatin groups were significantly reduced,and serum levels of TC,TG,LDL-C,IFN-γ,IL-18 and CRP were significantly decreased(P<0.05 or P<0.01),while the level of HDL-C was increased(P<0.05 or P<0.01);electron microscopy showed that autophagic bodies were increased;expressions of autophagy related factors LC3 Ⅱ,AMPK and ULK1 were induced,and expression of p62 was inhibited.Conclusion:Simiao Yong'an Decoction can induce AMPK/ULK1 autophagy axis and inhibit IFN-γ,IL-18 and CRP overexpressions in AS mice of may be one of the important mechanisms of Simiao Yong'an Decoction in anti-atherosclerosis.

OBJECTIVE To investigate the effects of different sterilization methods on 3D-printed polylactic acid(PLA)guide plates for orthopedic surgery,and to analyze their physical properties,microbial contamination,structural performance and bio compatibility after sterilization.METHODS PLA guide plates for orthopedic surgery were prepared with 3D printing technology and divided into a blank group,a hydrogen peroxide plasma steriliza-tion group,an ethylene oxide sterilization group and a pressure steam sterilization group.Before and after sterili-zation,the changes in volume and weight of the surgical guide plates were measured,microbial detection was con-ducted,structural changes were observed with a laser scanning confocal microscope,and cell co-culture was con-ducted to evaluate biocompatibility,thereby the effects of different sterilization methods were assessed.RESULTS The three sterilization methods had no significant effect on the volume and weight of PLA surgical guide plates.Microbial detection showed that all three sterilization methods were effective in killing bacteria,and bacte-rial cultures were negative.Laser confocal scanning microscopy revealed that sterilization treatment caused certain changes to the microstructure of the surgical guide plates,but high-temperature sterilization had a more pro-nounced effect on the deformation of the guide plate edges.Cell co-culture results indicated that the surgical guide plates treated with the three sterilization methods exhibited acceptable cytotoxicity and had little effect on cell pro-liferation.CONCLUSIONS All three sterilization methods cause microstructural changes to the surgical guide plate.Among them,pressure steam sterilization significantly deforms the structure of the guide plate,directly af-fecting its precise positioning of mutual spatial distances,angular relationships and orientation during surgery.Al-though hydrogen peroxide plasma sterilization does not cause significant deformation,ethylene oxide sterilization has the least impact on material properties and structural stability while ensuring the sterilization effect of PLA surgical guide plates.

Objective:To investigate the effect of Simiao Yong'an Decoction on AMPK/ULK1 autophagy axis and inflammatory reaction in atherosclerotic(AS)mice.Methods:ApoE-/-mice were randomly divided into control group,model group,low,medium and high doses of Simiao Yong'an Decoction groups and simvastatin group,with 10 mice in each group.Mice model of AS was induced by high-fat diet.Simao Yong'an Decoction given low(10.13 g/kg),medium(20.25 g/kg),high dose(40.5 g/kg)and simvastatin tablets(3 mg/kg)by gavage for 6 weeks.After administration,serum and aortic tissue of mice were collected,and serum lipid level was detected by automatic biochemical analyzer;HE staining was used to observe the pathological changes of aorta;autophagy level of plaque tissue was observed by transmission electron microscope;levels of inflammatory factors IL-18,IFN-γ and CRP in serum were detected by ELISA;expression levels of AMPK,ULK1 and p62 mRNA were detected by qRT-PCR;expressions of LC3Ⅱ and p-ULK1 protein were detected by immunofluorescence labeling;expressions of p-AMPK and p62 were detected by immunohistochemis-try.Results:Compared with model group,aortic plaque in Simiao Yong'an Decoction and simvastatin groups were significantly reduced,and serum levels of TC,TG,LDL-C,IFN-γ,IL-18 and CRP were significantly decreased(P<0.05 or P<0.01),while the level of HDL-C was increased(P<0.05 or P<0.01);electron microscopy showed that autophagic bodies were increased;expressions of autophagy related factors LC3 Ⅱ,AMPK and ULK1 were induced,and expression of p62 was inhibited.Conclusion:Simiao Yong'an Decoction can induce AMPK/ULK1 autophagy axis and inhibit IFN-γ,IL-18 and CRP overexpressions in AS mice of may be one of the important mechanisms of Simiao Yong'an Decoction in anti-atherosclerosis.

Background: Developing and validating a modified parameter, the SYS-G angle (the angle between the lower endplate of the C2 and the upper endplate of C7 vertebrae), as a feasible substitute for the C2–C7 Cobb method in assessing cervical sagittal alignment and exploring its reference range through a large-scale retrospective study. Methods: The visibility of the C6, C7 upper, and C7 lower endplates was graded and compared. Baseline data such as height, weight, body mass index (BMI), age, and sex were analyzed for their impact on the visibility of the C7 lower endplate. Values of C2-6 Cobb angle, SYS-G angle, and C2-7 Cobb angle were measured. The intra- and interobserver reliability, differences, and efficacy of evaluation on cervical lordosis of the parameters were compared, and the correlations among the parameters were analyzed. Furthermore, reference ranges for the SYS-G angle were established based on lateral cervical spine x-rays of 825 asymptomatic Chinese adults across different age groups and sexes. Results: The visibility of the C7 lower endplates was significantly reduced compared to the C6 lower and C7 upper endplates.Age, weight, BMI, and male sex were identified as factors negatively influencing the visibility of the C7 lower endplate. Both intraobserver and interobserver reliability demonstrated excellence for all tested parameters. The linear regression model unveiled a stronger association of the SYS-G angle with the C2-7 Cobb angle compared to the C2-6 Cobb angle. Furthermore, the SYS-G angle exhibited excellent efficacy in evaluating cervical lordosis. Age displayed a positive correlation with the SYS-G angle, and across every age bracket from 20 to 69 years, men exhibited a higher mean SYS-G angle compared to women. Conclusions The visibility of the C7 lower endplate diminishes with increasing age, weight, BMI, and male sex. In cases where the C7 lower endplate is unclear, the SYS-G angle emerges as a reliable method for estimating cervical sagittal morphology. Reference ranges for the SYS-G angle were established across various age groups and sexes among asymptomatic Chinese adults, offering a valuable resource to guide therapeutic interventions for cervical spine disorders and deformities.

Background: Developing and validating a modified parameter, the SYS-G angle (the angle between the lower endplate of the C2 and the upper endplate of C7 vertebrae), as a feasible substitute for the C2–C7 Cobb method in assessing cervical sagittal alignment and exploring its reference range through a large-scale retrospective study. Methods: The visibility of the C6, C7 upper, and C7 lower endplates was graded and compared. Baseline data such as height, weight, body mass index (BMI), age, and sex were analyzed for their impact on the visibility of the C7 lower endplate. Values of C2-6 Cobb angle, SYS-G angle, and C2-7 Cobb angle were measured. The intra- and interobserver reliability, differences, and efficacy of evaluation on cervical lordosis of the parameters were compared, and the correlations among the parameters were analyzed. Furthermore, reference ranges for the SYS-G angle were established based on lateral cervical spine x-rays of 825 asymptomatic Chinese adults across different age groups and sexes. Results: The visibility of the C7 lower endplates was significantly reduced compared to the C6 lower and C7 upper endplates.Age, weight, BMI, and male sex were identified as factors negatively influencing the visibility of the C7 lower endplate. Both intraobserver and interobserver reliability demonstrated excellence for all tested parameters. The linear regression model unveiled a stronger association of the SYS-G angle with the C2-7 Cobb angle compared to the C2-6 Cobb angle. Furthermore, the SYS-G angle exhibited excellent efficacy in evaluating cervical lordosis. Age displayed a positive correlation with the SYS-G angle, and across every age bracket from 20 to 69 years, men exhibited a higher mean SYS-G angle compared to women. Conclusions The visibility of the C7 lower endplate diminishes with increasing age, weight, BMI, and male sex. In cases where the C7 lower endplate is unclear, the SYS-G angle emerges as a reliable method for estimating cervical sagittal morphology. Reference ranges for the SYS-G angle were established across various age groups and sexes among asymptomatic Chinese adults, offering a valuable resource to guide therapeutic interventions for cervical spine disorders and deformities.

Background: Developing and validating a modified parameter, the SYS-G angle (the angle between the lower endplate of the C2 and the upper endplate of C7 vertebrae), as a feasible substitute for the C2–C7 Cobb method in assessing cervical sagittal alignment and exploring its reference range through a large-scale retrospective study. Methods: The visibility of the C6, C7 upper, and C7 lower endplates was graded and compared. Baseline data such as height, weight, body mass index (BMI), age, and sex were analyzed for their impact on the visibility of the C7 lower endplate. Values of C2-6 Cobb angle, SYS-G angle, and C2-7 Cobb angle were measured. The intra- and interobserver reliability, differences, and efficacy of evaluation on cervical lordosis of the parameters were compared, and the correlations among the parameters were analyzed. Furthermore, reference ranges for the SYS-G angle were established based on lateral cervical spine x-rays of 825 asymptomatic Chinese adults across different age groups and sexes. Results: The visibility of the C7 lower endplates was significantly reduced compared to the C6 lower and C7 upper endplates.Age, weight, BMI, and male sex were identified as factors negatively influencing the visibility of the C7 lower endplate. Both intraobserver and interobserver reliability demonstrated excellence for all tested parameters. The linear regression model unveiled a stronger association of the SYS-G angle with the C2-7 Cobb angle compared to the C2-6 Cobb angle. Furthermore, the SYS-G angle exhibited excellent efficacy in evaluating cervical lordosis. Age displayed a positive correlation with the SYS-G angle, and across every age bracket from 20 to 69 years, men exhibited a higher mean SYS-G angle compared to women. Conclusions The visibility of the C7 lower endplate diminishes with increasing age, weight, BMI, and male sex. In cases where the C7 lower endplate is unclear, the SYS-G angle emerges as a reliable method for estimating cervical sagittal morphology. Reference ranges for the SYS-G angle were established across various age groups and sexes among asymptomatic Chinese adults, offering a valuable resource to guide therapeutic interventions for cervical spine disorders and deformities.

Background: Developing and validating a modified parameter, the SYS-G angle (the angle between the lower endplate of the C2 and the upper endplate of C7 vertebrae), as a feasible substitute for the C2–C7 Cobb method in assessing cervical sagittal alignment and exploring its reference range through a large-scale retrospective study. Methods: The visibility of the C6, C7 upper, and C7 lower endplates was graded and compared. Baseline data such as height, weight, body mass index (BMI), age, and sex were analyzed for their impact on the visibility of the C7 lower endplate. Values of C2-6 Cobb angle, SYS-G angle, and C2-7 Cobb angle were measured. The intra- and interobserver reliability, differences, and efficacy of evaluation on cervical lordosis of the parameters were compared, and the correlations among the parameters were analyzed. Furthermore, reference ranges for the SYS-G angle were established based on lateral cervical spine x-rays of 825 asymptomatic Chinese adults across different age groups and sexes. Results: The visibility of the C7 lower endplates was significantly reduced compared to the C6 lower and C7 upper endplates.Age, weight, BMI, and male sex were identified as factors negatively influencing the visibility of the C7 lower endplate. Both intraobserver and interobserver reliability demonstrated excellence for all tested parameters. The linear regression model unveiled a stronger association of the SYS-G angle with the C2-7 Cobb angle compared to the C2-6 Cobb angle. Furthermore, the SYS-G angle exhibited excellent efficacy in evaluating cervical lordosis. Age displayed a positive correlation with the SYS-G angle, and across every age bracket from 20 to 69 years, men exhibited a higher mean SYS-G angle compared to women. Conclusions The visibility of the C7 lower endplate diminishes with increasing age, weight, BMI, and male sex. In cases where the C7 lower endplate is unclear, the SYS-G angle emerges as a reliable method for estimating cervical sagittal morphology. Reference ranges for the SYS-G angle were established across various age groups and sexes among asymptomatic Chinese adults, offering a valuable resource to guide therapeutic interventions for cervical spine disorders and deformities.

Objective To analyze the acupoint selection law of acupuncture and moxibustion for postherpetic neuralgia(PHN)with R language data mining technology.Methods The clinical research literature on acupuncture and moxibustion treatment of PHN included in CNKI,Wanfang Data,VIP and CBM from January 1,2010 to July 1,2023 was retrieved,and the database was established by Excel 2016.R language was used to statistically analyze the frequency of acupoint usage,meridians,locations,specific acupoints,etc.Through association rule analysis and clustering analysis,the characteristics and law of acupoint selection for acupuncture and moxibustion treatment of PHN were obtained.Results A total of 198 articles were included,including 83 acupoints,with a total frequency of 714 times.The high-frequency acupoints include Ashi acupoint,Jiaji acupoint and Yanglingquan.The commonly used meridians were gallbladder meridian,spleen meridian and large intestine meridiam.The acupoints were mostly in the upper and lower limbs,with the Wushu acupoints,Yuan acupoints and Xiahe acupoints being the most common.The core acupoint was Ashi acupoint,Jiaji acupoint,Hegu,Quchi,and 9 sets of association rules and 5 effective clusters were obtained.Conclusion The most commonly used acupoints for acupuncture and moxibustion treatment of PHN are Ashi acupoint,Jiaji acupoint,Hegu and Quchi,which mainly follow the principle of combining local acupoint selection with distal acupoint selection.

Objective:It explored the effects of local financial input on the efficiency of health resource allocation in China,and analyzed its nonlinear relationship,so as to provide a basis for health policy formulation.Methods:Based on the data of 31 provinces,municipalities and autonomous regions from 2010 to 2022,the super-efficiency SBM model was used to measure the allocation efficiency of health resources,and its distribution dynamics were analyzed in combination with kernel density estimation.The threshold regression model was used to evaluate the impact of different financial input levels on the efficiency.Results:Local financial input has significant threshold effect on health resource allocation efficiency.Kernel density estimation shows that with the increase of input,the efficiency distribution tends to be concentrated,the high efficiency region increases,and the low efficiency region decreases.Threshold regression results show that when the financial input exceeds the key threshold of 7.1%,the positive impact is significantly enhanced.Conclusion:Raising the key threshold of financial input can significantly improve the efficiency of health resource allocation.Policymakers should take regional differences into account,formulate differentiated strategies,strengthen implementation and supervision,ensure the effective use of funds,so as optimize health resource allocation.

OBJECTIVE To investigate the effects of different sterilization methods on 3D-printed polylactic acid(PLA)guide plates for orthopedic surgery,and to analyze their physical properties,microbial contamination,structural performance and bio compatibility after sterilization.METHODS PLA guide plates for orthopedic surgery were prepared with 3D printing technology and divided into a blank group,a hydrogen peroxide plasma steriliza-tion group,an ethylene oxide sterilization group and a pressure steam sterilization group.Before and after sterili-zation,the changes in volume and weight of the surgical guide plates were measured,microbial detection was con-ducted,structural changes were observed with a laser scanning confocal microscope,and cell co-culture was con-ducted to evaluate biocompatibility,thereby the effects of different sterilization methods were assessed.RESULTS The three sterilization methods had no significant effect on the volume and weight of PLA surgical guide plates.Microbial detection showed that all three sterilization methods were effective in killing bacteria,and bacte-rial cultures were negative.Laser confocal scanning microscopy revealed that sterilization treatment caused certain changes to the microstructure of the surgical guide plates,but high-temperature sterilization had a more pro-nounced effect on the deformation of the guide plate edges.Cell co-culture results indicated that the surgical guide plates treated with the three sterilization methods exhibited acceptable cytotoxicity and had little effect on cell pro-liferation.CONCLUSIONS All three sterilization methods cause microstructural changes to the surgical guide plate.Among them,pressure steam sterilization significantly deforms the structure of the guide plate,directly af-fecting its precise positioning of mutual spatial distances,angular relationships and orientation during surgery.Al-though hydrogen peroxide plasma sterilization does not cause significant deformation,ethylene oxide sterilization has the least impact on material properties and structural stability while ensuring the sterilization effect of PLA surgical guide plates.