Objective:To investigate the effects of individual versus connected microdroplet culture modes in time-lapse (TL) incubators on embryo development parameters and pregnancy outcomes in patients undergoing whole embryo culture to blastocyst stage.Methods:Using a retrospective cohort study, clinical data from 3 507 fresh blastocyst transfer cycles were analyzed. These cycles involved patients who underwent assisted reproductive technology treatment with whole embryo culture to blastocyst stage at the Reproductive Medical Center of Northwest Women's and Children's Hospital between January 2019 and December 2023. Based on different culture modes, patients were divided into two groups, connected group ( n=2 446, using connected microdroplet culture) and individual group ( n=1 061, using individual microdroplet culture). Baseline characteristics, embryo development parameters, pregnancy outcomes, and neonatal outcomes were compared between the two groups. Generalized linear models (GLM) were used to adjust for confounding factors and analyze the effect of culture mode. Results:Embryo development assessment showed the day 3 (D3) high-quality embryo rate in the connected group [60.12% (12 136/20 187)] was significantly lower than that in the individual group [63.62% (4 705/7 395), P<0.001], whereas the high-quality blastocyst formation rate [34.93% (7 052/20 187)] and the available blastocyst formation rate [56.07% (11 319/20 187)] were both significantly higher than those in the individual group [33.08% (2 446/7 395), P=0.004; 51.45% (3 805/7 395), P<0.001], with statistically significant differences. The implantation rate [67.40% (1 774/2 632)], the clinical pregnancy rate [70.20% (1 717/2 446)], and the live birth rate [60.66% (1 469/2 446)] in the connected group were all significantly higher than those in the individual group [63.40% (724/1 142), P=0.017; 66.73% (708/1 061), P=0.041; 55.89% (593/1 061), P=0.021], with statistically significant differences. Neonatal outcomes showed no statistically significant difference between the two groups (all P>0.05). After adjusting for confounding factors using GLM, connected culture was an independent influencing factor for D3 high-quality embryo rate (a MD=-0.017, 95% CI: -0.034-0.000, P=0.046), high-quality blastocyst formation rate (a MD=-0.020, 95% CI: 0.002-0.037, P=0.026), available blastocyst formation rate (a MD=0.032, 95% CI: 0.015-0.048, P<0.001), live birth rate (a OR=1.182, 95% CI: 1.006-1.388, P=0.042). However, it had no effect on D3 available embryo rate, clinical pregnancy rate, or early miscarriage rate (all P>0.05). Conclusion:In TL incubator systems, individual and connected microdroplet culture modes exert different effects at various stages of embryo development. Individual microdroplet culture can significantly enhance cleavage-stage embryo quality, whereas the connected microdroplet culture was more beneficial for enhancing the blastocyst formation rate and quality, ultimately improving the live birth rate without increasing neonatal risks.

Objective:To investigate the effects of individual versus connected microdroplet culture modes in time-lapse (TL) incubators on embryo development parameters and pregnancy outcomes in patients undergoing whole embryo culture to blastocyst stage.Methods:Using a retrospective cohort study, clinical data from 3 507 fresh blastocyst transfer cycles were analyzed. These cycles involved patients who underwent assisted reproductive technology treatment with whole embryo culture to blastocyst stage at the Reproductive Medical Center of Northwest Women's and Children's Hospital between January 2019 and December 2023. Based on different culture modes, patients were divided into two groups, connected group ( n=2 446, using connected microdroplet culture) and individual group ( n=1 061, using individual microdroplet culture). Baseline characteristics, embryo development parameters, pregnancy outcomes, and neonatal outcomes were compared between the two groups. Generalized linear models (GLM) were used to adjust for confounding factors and analyze the effect of culture mode. Results:Embryo development assessment showed the day 3 (D3) high-quality embryo rate in the connected group [60.12% (12 136/20 187)] was significantly lower than that in the individual group [63.62% (4 705/7 395), P<0.001], whereas the high-quality blastocyst formation rate [34.93% (7 052/20 187)] and the available blastocyst formation rate [56.07% (11 319/20 187)] were both significantly higher than those in the individual group [33.08% (2 446/7 395), P=0.004; 51.45% (3 805/7 395), P<0.001], with statistically significant differences. The implantation rate [67.40% (1 774/2 632)], the clinical pregnancy rate [70.20% (1 717/2 446)], and the live birth rate [60.66% (1 469/2 446)] in the connected group were all significantly higher than those in the individual group [63.40% (724/1 142), P=0.017; 66.73% (708/1 061), P=0.041; 55.89% (593/1 061), P=0.021], with statistically significant differences. Neonatal outcomes showed no statistically significant difference between the two groups (all P>0.05). After adjusting for confounding factors using GLM, connected culture was an independent influencing factor for D3 high-quality embryo rate (a MD=-0.017, 95% CI: -0.034-0.000, P=0.046), high-quality blastocyst formation rate (a MD=-0.020, 95% CI: 0.002-0.037, P=0.026), available blastocyst formation rate (a MD=0.032, 95% CI: 0.015-0.048, P<0.001), live birth rate (a OR=1.182, 95% CI: 1.006-1.388, P=0.042). However, it had no effect on D3 available embryo rate, clinical pregnancy rate, or early miscarriage rate (all P>0.05). Conclusion:In TL incubator systems, individual and connected microdroplet culture modes exert different effects at various stages of embryo development. Individual microdroplet culture can significantly enhance cleavage-stage embryo quality, whereas the connected microdroplet culture was more beneficial for enhancing the blastocyst formation rate and quality, ultimately improving the live birth rate without increasing neonatal risks.

Adamantinomatous craniopharyngioma (ACP) is an epithelial tumor originating from remnants of Rathke's pouch. A highly inflammatory microenvironment and histological presence of the senescence-associated secretory phenotype (SASP) are key pathological features of ACP. Pyroptosis, an inflammatory form of programmed cell death, forms a positive feedback loop with SASP, mutually promoting their effects. This review summarizes the current research progress on regulatory mechanism of SASP and pyroptosis in ACP so as to further understand the pathophysiological mechanisms underlying ACP development.

Metastasis serves as an indicator of malignancy and is a biological characteristic of carcinomas. Epithelial-mesenchymal transition (EMT) plays a key role in the promotion of tumor invasion and metastasis and in the enhancement of tumor cell aggressiveness. Prostaglandin E synthase 3 (p23) is a cochaperone for heat shock protein 90 (HSP90). Our previous study showed that p23 is an HSP90-independent transcription factor in cancer-associated inflammation. The effect and mechanism of action of p23 on lung cancer metastasis are tested in this study. By utilizing cell models in vitro and mouse tail vein metastasis models in vivo, the results provide solid evidence that p23 is critical for promoting lung cancer metastases by regulating downstream CXCL1 expression. Rather than acting independently, p23 forms a complex with RNA-binding motif protein 14 (RBM14) to facilitate EMT progression in lung cancer. Therefore, our study provides evidence for the potential role of the RBM14-p23-CXCL1-EMT axis in the metastasis of lung cancer.

Conventional surgical management of pelvic fractures entails incision and reduction with internal fixation, a procedure associated with significant bleeding, trauma, and a high surgical risk. The advent of advanced imaging techniques and sophisticated surgical instruments has led to a paradigm shift towards minimally invasive surgery as the prevailing treatment modality for such injuries. The efficacy of reduction is pivotal in determining the clinical prognosis of pelvic fractures, underscoring the importance of enhancing the quality of reduction in the minimally invasive surgery. The advent of 3D printing technology, intelligent orthopaedic surgical robots, mixed reality augmentation technology and high-precision optical localization tracking has catapulted minimally invasive pelvic fracture reduction to the forefront of research in the field of orthopaedics. Studies have demonstrated encouraging outcomes. This paper reviews relevant literature, mainly focusing on the evaluation and measurement, open reduction techniques, minimally invasive closed reduction techniques, and surgical robot assisted reduction techniques in treatment of pelvic fractures, to summarize the technical research progress in minimally invasive closed surgical reduction for pelvic fractures.

Pelvic fractures, the most severe bone trauma, account for approximately 3% of all fractures. As they are caused by high-energy injuries, their rates of mortality and disability are high. Over the past two centuries, the treatment strategies for these fractures have evolved from conservative therapy to open reduction and plate fixation, then to closed reduction and percutaneous screw fixation, and recently to screw fixation assisted by artificial intelligence. In the past 40 years, constant progress has been made in the treatment of pelvic fractures. It is generally acknowledged that a personalized treatment plan should be formulated based on each patient's age, fracture type, comorbidities, functional requirements and other factors when an appropriate treatment mode is chosen. The primary aim of treatment is to accelerate functional recovery, decrease the rate of disability after injury, and improve the quality of daily life of the patient. This paper reviews the treatment history of pelvic fractures, discusses the advantages and disadvantages of current treatment options, and looks ahead to future prospects, aiming to offer valuable references for related clinical practice.

Conventional surgical management of pelvic fractures entails incision and reduction with internal fixation, a procedure associated with significant bleeding, trauma, and a high surgical risk. The advent of advanced imaging techniques and sophisticated surgical instruments has led to a paradigm shift towards minimally invasive surgery as the prevailing treatment modality for such injuries. The efficacy of reduction is pivotal in determining the clinical prognosis of pelvic fractures, underscoring the importance of enhancing the quality of reduction in the minimally invasive surgery. The advent of 3D printing technology, intelligent orthopaedic surgical robots, mixed reality augmentation technology and high-precision optical localization tracking has catapulted minimally invasive pelvic fracture reduction to the forefront of research in the field of orthopaedics. Studies have demonstrated encouraging outcomes. This paper reviews relevant literature, mainly focusing on the evaluation and measurement, open reduction techniques, minimally invasive closed reduction techniques, and surgical robot assisted reduction techniques in treatment of pelvic fractures, to summarize the technical research progress in minimally invasive closed surgical reduction for pelvic fractures.

Pelvic fractures, the most severe bone trauma, account for approximately 3% of all fractures. As they are caused by high-energy injuries, their rates of mortality and disability are high. Over the past two centuries, the treatment strategies for these fractures have evolved from conservative therapy to open reduction and plate fixation, then to closed reduction and percutaneous screw fixation, and recently to screw fixation assisted by artificial intelligence. In the past 40 years, constant progress has been made in the treatment of pelvic fractures. It is generally acknowledged that a personalized treatment plan should be formulated based on each patient's age, fracture type, comorbidities, functional requirements and other factors when an appropriate treatment mode is chosen. The primary aim of treatment is to accelerate functional recovery, decrease the rate of disability after injury, and improve the quality of daily life of the patient. This paper reviews the treatment history of pelvic fractures, discusses the advantages and disadvantages of current treatment options, and looks ahead to future prospects, aiming to offer valuable references for related clinical practice.

Adamantinomatous craniopharyngioma (ACP) is an epithelial tumor originating from remnants of Rathke's pouch. A highly inflammatory microenvironment and histological presence of the senescence-associated secretory phenotype (SASP) are key pathological features of ACP. Pyroptosis, an inflammatory form of programmed cell death, forms a positive feedback loop with SASP, mutually promoting their effects. This review summarizes the current research progress on regulatory mechanism of SASP and pyroptosis in ACP so as to further understand the pathophysiological mechanisms underlying ACP development.

ObjectiveTo identify and analyze the possible influencing factors of obesity among public primary school students in Minhang District， Shanghai. MethodsBasic data， collected through questionnaire stars， was imported with merged physical examination data into Excel to form a database. Data were collected by questionnaire and analyzed by SPSS 22.00. Independent sample t-test was used for the data with normal distribution. Nonparametric test was used for the data with non-normal distribution. χ² test was used for the quantitative data. Logistic regression was used for univariate and multivariate analysis. ResultsAccording to the national physical health standards for students （revised in 2014） ， the prevalence rate of obesity among primary school students in Minhang district was 29.63% . The prevalence of overweight and obesity was 32.1% in boys and 26.9% in girls. The trend of overweight and obesity in different grades was similar among different genders .A single factor analysis showed that， being the only child （χ²=9.300， P<0.01） ， father obesity（χ²=106.417， P<0.001） or mother obesity（χ²=118.534， P<0.001） ， mother's overweight during pregnancy （χ²=159.731， P<0.001） ， caregiver's role as grandparents （χ²=38.736， P<0.001） ， low education level （χ²=111.309， P<0.001） had effects on overweight and obesity of children while the differences had statistical significance. Pupil's bad eating habit （χ²=18.905，P<0.001） and preference （χ²=22.901， P<0.001） ， insufficient sleep time （χ²=61.685， P<0.001） ， long-time using of electronic products （χ²=37.182， P<0.001） and low-time of exercise （χ²=15.328， P<0.001） also affected the obesity of primary school students. Among the five factors of family， diet， psychology， static state and dynamic state， the influencing factors of obesity in primary school students from grade one to grade four were being the only child， obese father and/or mother， overweight mother during pregnancy， caregivers without higher education. In terms of diet， it was mainly based on eating habits before bedtime， as well as partial and picky eating habits. In terms of psychology， the main psychological source was the pressure of learning in school. There was a clear relationship between the pace of learning and not keeping up. Static analysis revealed a correlation with lack of sleep. After assigning values based on eye hygiene recommendations for the use of electronic products， it was found that there was no direct correlation between obesity in primary school students and the duration of electronic product use. Dynamic analysis showed that not taking part in school physical exercise was related to obesity. ConclusionThe obesity of primary school students is influenced by family， diet， psychology， static and dynamic factors. The intervention of obesity in primary school needs the joint efforts of school， society， family， self-cognition and so on.