ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Objective:To study the risk factors for acute kidney injury (AKI) following one-stage revision surgery combined with intra-articular antibiotics infusion for periprosthetic joint infection (PJI) of the hip joint.Methods:A retrospective analysis was conducted on the data of 168 patients with hip PJI who underwent one-stage revision surgery combined with intra-articular antibiotics infusion in the Department of Joint Surgery, the First Affiliated Hospital of Xinjiang Medical University, from May 1, 2010 to April 30, 2024. There were 87 males and 81 females with an average age of 60.1±14.6 years (range: 21-89 years). The body mass index (BMI) was 24.9±4.6 kg/m 2 (range: 17-41 kg/m 2). PJI was diagnosed according to the criteria of Musculoskeletal Infection Society (MSIS) in 2011. AKI was diagnosed and classified according to the Kidney Disease: Improving Global Outcomes (KDIGO) criteria. For AKI group and non-AKI group, risk factors were screened by univariate analysis on their age, gender, BMI, BMI≥30 kg/m 2 (yes/no), American Society of Anesthesiologists (ASA) score (II/III), hypertension, diabetes, chronic kidney disease (CKD), surgical side (left/right), duration of intravenous antibiotic use, duration of intra-articular antibiotic use, preoperative blood transfusion, postoperative blood transfusion, baseline hemoglobin value, anemia grade (none/mild/moderate), baseline serum creatinine value, baseline serum creatinine grade (normal/below normal range/above normal range). Variables with P<0.10 were included in the multivariate logistic regression model to identify independent risk factors. Results:The overall incidence of AKI was 9.52%(16/168), among which 50%(8 cases) were stage I AKI, transient and requiring no special treatment. 12.5% (2 cases) were stage II AKI and did not undergo dialysis. 37.5%(6 cases) were stage III AKI. One case needed temporary hemodialysis, and there was no patient requiring long-term dialysis. There were significant differences in age, diabetes, chronic kidney disease and ASA score between AKI group and non-AKI group ( P<0.05). The univariate logistic regression analysis revealed that there were significant differences in age ( P=0.005), BMI ( P=0.078), ASA score level Ⅲ ( P=0.037), diabetes ( P=0.025), CKD ( P=0.003), and low baseline serum creatinine level ( P=0.056). Multivariate logistic regression analysis showed that age, CKD and low baseline serum creatinine level were independent risk factors for AKI ( P<0.05). Conclusions:The incidence of AKI after one-stage revision surgery combined with local antibiotic use in the joint cavity was relatively low in the treatment of PJI after total hip arthroplasty. Hower elderly patients with a history of CKD, or a low baseline serum creatinine level before surgery were at higher risk of developing AKI.

Objective:To compare the clinical and radiological outcomes between the ankle dislocation exposure versus the traditional posterolateral approach exposure in the treatment of complex posterior ankle malunion.Methods:This retrospective study analyzed the 50 patients (50 feet) with posterior ankle malunion who had been treated at Department of Foot and Ankle Orthopedics, Foshan Hospital of Traditional Chinese Medicine Affiliated to Guangzhou University of Chinese Medicine from May 2015 to June 2023. This cohort included 18 males and 32 females, with an age of (46.2±12.0) years. The duration from injury to surgery averaged 7.0 (4.0, 12.2) months. The patients were divided into 2 groups based on the surgical exposure methods: an ankle dislocation group (22 cases) in which the posterior ankle malunion was exposed by ankle dislocation before reduction and fixation, and a traditional posterolateral approach group (28 cases) in which the posterior ankle malunion was exposed by the traditional posterolateral approach before reduction and fixation. Evaluation indices included operative time, ankle arthritis grading, incidence of complications, as well as pre-operative and last follow-up recordings of distal tibial articular angle and joint step-off, visual analogue scale (VAS) pain score, and ankle-hindfoot score of American Orthopaedic Foot and Ankle society (AOFAS).Results:There was no significant difference in the baseline data between the 2 groups, indicating comparability ( P>0.05). The average follow-up was (39.4±17.9) months. The operative time in the dislocation group [(95.8±9.9) min] was significantly shorter than that in the posterolateral approach group [(121.9±14.3) min] ( P<0.05). The step-off on the distal tibial articular surface at the last follow-up in the dislocation group [0.3 (0.0, 0.9) mm] was significantly lower than that in the posterolateral approach group [1.0 (0.3, 1.1) mm] ( P<0.05). The grading of ankle arthritis was significantly worse in the posterolateral approach group than that in the dislocation group ( P<0.05). There were no differences in distal tibial articular angle, VAS pain score, AOFAS ankle-hindfoot score, or postoperative complications between the 2 groups at the last follow-up ( P>0.05). Conclusions:Both ankle dislocation exposure and traditional posterolateral approach exposure yield satisfactory clinical and radiological outcomes in patients with complex posterior ankle malunion. However, the ankle dislocation exposure offers a novel method for direct visualization of the malunion on multiple planes, which is more advantageous for restoration of the anatomical consistency of the distal tibial articular surface.

Objective To investigate the application value of conventional MRI combined with diffusion tensor imaging(DTI)in evaluating the correlation between the texture composition of benign prostatic hyperplasia(BPH)and the International Prostate Symptom Score(IPSS).Methods Seventy patients with BPH confirmed by pathology were retrospectively analyzed and all patients underwent conventional MRI,DTI and IPSS before surgery.Evaluation metrics included:the mean signal intensity of T2WI(mean-SI-T2WI),apparent diffusion coefficient(ADC)and fractional anisotropy(FA)values.Independent samples t-test,partial correlation analysis,and receiver operating characteristic(ROC)curve were used to assess the correlation between the texture parameters of the prostate transition zone and IPSS.Results The mean-SI-T2WI was significantly negatively correlated with IPSS(r=-0.683,P<0.001);the average ADC value was slightly negatively correlated with IPSS(r=-0.467,P<0.001);and the average FA value was slightly positively correlated with IPSS(r=0.419,P<0.001).The predictive value of MRI texture parameters for IPSS in BPH patients,ranked from high to low,mean-SI-T2WI[area under the curve(AUC)=0.734],average ADC value(AUC=0.673),and average FA value(AUC=0.635);However,the combination of mean-SI-T2WI+ADC+FA(AUC=0.791)did not significantly improve the diagnostic efficacy by DeLong's test(P>0.05).Conclusion Mean-SI-T2WI,DWI and DTI can be used to evaluate the composition of the prostate,among which mean-SI-T2WI is the best,and the com-bination of them can not improve the diagnostic efficacy.

Objective:To study the risk factors for acute kidney injury (AKI) following one-stage revision surgery combined with intra-articular antibiotics infusion for periprosthetic joint infection (PJI) of the hip joint.Methods:A retrospective analysis was conducted on the data of 168 patients with hip PJI who underwent one-stage revision surgery combined with intra-articular antibiotics infusion in the Department of Joint Surgery, the First Affiliated Hospital of Xinjiang Medical University, from May 1, 2010 to April 30, 2024. There were 87 males and 81 females with an average age of 60.1±14.6 years (range: 21-89 years). The body mass index (BMI) was 24.9±4.6 kg/m 2 (range: 17-41 kg/m 2). PJI was diagnosed according to the criteria of Musculoskeletal Infection Society (MSIS) in 2011. AKI was diagnosed and classified according to the Kidney Disease: Improving Global Outcomes (KDIGO) criteria. For AKI group and non-AKI group, risk factors were screened by univariate analysis on their age, gender, BMI, BMI≥30 kg/m 2 (yes/no), American Society of Anesthesiologists (ASA) score (II/III), hypertension, diabetes, chronic kidney disease (CKD), surgical side (left/right), duration of intravenous antibiotic use, duration of intra-articular antibiotic use, preoperative blood transfusion, postoperative blood transfusion, baseline hemoglobin value, anemia grade (none/mild/moderate), baseline serum creatinine value, baseline serum creatinine grade (normal/below normal range/above normal range). Variables with P<0.10 were included in the multivariate logistic regression model to identify independent risk factors. Results:The overall incidence of AKI was 9.52%(16/168), among which 50%(8 cases) were stage I AKI, transient and requiring no special treatment. 12.5% (2 cases) were stage II AKI and did not undergo dialysis. 37.5%(6 cases) were stage III AKI. One case needed temporary hemodialysis, and there was no patient requiring long-term dialysis. There were significant differences in age, diabetes, chronic kidney disease and ASA score between AKI group and non-AKI group ( P<0.05). The univariate logistic regression analysis revealed that there were significant differences in age ( P=0.005), BMI ( P=0.078), ASA score level Ⅲ ( P=0.037), diabetes ( P=0.025), CKD ( P=0.003), and low baseline serum creatinine level ( P=0.056). Multivariate logistic regression analysis showed that age, CKD and low baseline serum creatinine level were independent risk factors for AKI ( P<0.05). Conclusions:The incidence of AKI after one-stage revision surgery combined with local antibiotic use in the joint cavity was relatively low in the treatment of PJI after total hip arthroplasty. Hower elderly patients with a history of CKD, or a low baseline serum creatinine level before surgery were at higher risk of developing AKI.

Objective To investigate the application value of conventional MRI combined with diffusion tensor imaging(DTI)in evaluating the correlation between the texture composition of benign prostatic hyperplasia(BPH)and the International Prostate Symptom Score(IPSS).Methods Seventy patients with BPH confirmed by pathology were retrospectively analyzed and all patients underwent conventional MRI,DTI and IPSS before surgery.Evaluation metrics included:the mean signal intensity of T2WI(mean-SI-T2WI),apparent diffusion coefficient(ADC)and fractional anisotropy(FA)values.Independent samples t-test,partial correlation analysis,and receiver operating characteristic(ROC)curve were used to assess the correlation between the texture parameters of the prostate transition zone and IPSS.Results The mean-SI-T2WI was significantly negatively correlated with IPSS(r=-0.683,P<0.001);the average ADC value was slightly negatively correlated with IPSS(r=-0.467,P<0.001);and the average FA value was slightly positively correlated with IPSS(r=0.419,P<0.001).The predictive value of MRI texture parameters for IPSS in BPH patients,ranked from high to low,mean-SI-T2WI[area under the curve(AUC)=0.734],average ADC value(AUC=0.673),and average FA value(AUC=0.635);However,the combination of mean-SI-T2WI+ADC+FA(AUC=0.791)did not significantly improve the diagnostic efficacy by DeLong's test(P>0.05).Conclusion Mean-SI-T2WI,DWI and DTI can be used to evaluate the composition of the prostate,among which mean-SI-T2WI is the best,and the com-bination of them can not improve the diagnostic efficacy.

Objective:To compare the clinical and radiological outcomes between the ankle dislocation exposure versus the traditional posterolateral approach exposure in the treatment of complex posterior ankle malunion.Methods:This retrospective study analyzed the 50 patients (50 feet) with posterior ankle malunion who had been treated at Department of Foot and Ankle Orthopedics, Foshan Hospital of Traditional Chinese Medicine Affiliated to Guangzhou University of Chinese Medicine from May 2015 to June 2023. This cohort included 18 males and 32 females, with an age of (46.2±12.0) years. The duration from injury to surgery averaged 7.0 (4.0, 12.2) months. The patients were divided into 2 groups based on the surgical exposure methods: an ankle dislocation group (22 cases) in which the posterior ankle malunion was exposed by ankle dislocation before reduction and fixation, and a traditional posterolateral approach group (28 cases) in which the posterior ankle malunion was exposed by the traditional posterolateral approach before reduction and fixation. Evaluation indices included operative time, ankle arthritis grading, incidence of complications, as well as pre-operative and last follow-up recordings of distal tibial articular angle and joint step-off, visual analogue scale (VAS) pain score, and ankle-hindfoot score of American Orthopaedic Foot and Ankle society (AOFAS).Results:There was no significant difference in the baseline data between the 2 groups, indicating comparability ( P>0.05). The average follow-up was (39.4±17.9) months. The operative time in the dislocation group [(95.8±9.9) min] was significantly shorter than that in the posterolateral approach group [(121.9±14.3) min] ( P<0.05). The step-off on the distal tibial articular surface at the last follow-up in the dislocation group [0.3 (0.0, 0.9) mm] was significantly lower than that in the posterolateral approach group [1.0 (0.3, 1.1) mm] ( P<0.05). The grading of ankle arthritis was significantly worse in the posterolateral approach group than that in the dislocation group ( P<0.05). There were no differences in distal tibial articular angle, VAS pain score, AOFAS ankle-hindfoot score, or postoperative complications between the 2 groups at the last follow-up ( P>0.05). Conclusions:Both ankle dislocation exposure and traditional posterolateral approach exposure yield satisfactory clinical and radiological outcomes in patients with complex posterior ankle malunion. However, the ankle dislocation exposure offers a novel method for direct visualization of the malunion on multiple planes, which is more advantageous for restoration of the anatomical consistency of the distal tibial articular surface.

BACKGROUND/OBJECTIVES: The study examined the association between homocysteine and diabetes mellitus in patients with H-type hypertension and assessed the possible effect modifiers. SUBJECTS/METHODS: This cross-sectional study included 1,255 eligible participants in the ‘H-type Hypertension Management and Stroke Prevention Strategic International Science and Technology Innovation Cooperation Project’ among rural Chinese people with H-type hypertension. A multivariate logistic regression model was used to evaluate the relationship between homocysteine and diabetes mellitus. RESULTS: The mean level of total homocysteine (tHcy) in the diabetes mellitus population was 19.37 μmol/L, which was significantly higher than the non-diabetic patients (18.18 μmol/L). When tHcy was analyzed as a continuous variable, the odds ratio (OR) of diabetes was 1.17 (95% confidence interval [CI], 1.01–1.35; per interquartile range). When tHcy was stratified according to the quintile, the ORs for diabetes were 2.86 (95% CI, 1.22–6.69) in the highest quintile (tHcy ≥ 20.60 μmol/L) compared to the reference group (tHcy < 12.04 μmol/L). When tHcy was grouped by 15 μmol/L and 20 μmol/L, patients with tHcy ≥ 20 μmol/L had a significantly (P = 0.037) higher risk of diabetes (OR, 2.03; 95% CI, 1.04–3.96) than in those with tHcy < 15 μmol/L. Subgroup analysis showed that the tHcy-diabetes association was unaffected by other variables. CONCLUSION In this study of rural Chinese people with H-type hypertension, the tHcy levels showed a positive association with diabetes mellitus. This independent association is unaffected by other potential risk factors.

Background:The core circadian clock gene Bmal1 has been shown to be involved in the formation of visceral sensitization in irritable bowel syndrome(IBS)by affecting the tryptophan hydroxylase 1(TPH1)-5-hydroxytryptamine(5-HT)pathway,but the exact mechanism of its regulation is unknown.Aims:To investigate the molecular mechanism by which Bmal1 regulates the TPH1-5-HT pathway through the clock-controlled gene Piezo1.Methods:Dexamethasone was used to synchronize the expression of the circadian clock genes in RIN-14B cells.Bmal1 expression was up-regulated or down-regulated in RIN-14B cells by plasmid and siRNA transfection of the enterochromaffin cell(EC)model.The expression levels of target genes and proteins were detected by immunofluorescence staining,RT-qPCR,and Western blotting.5-HT content was detected by ELISA method.Results:(1)This study was the first to report the oscillation characteristics of RIN-14B circadian clock genes in EC model,among which the oscillation of Bmal1 was the most significant.Immunofluorescence showed that RIN-14B cells expressed CGA,Bmal1 and Piezo1.(2)After transfected with the Bmal1 overexpression plasmid,the mRNA and protein expression of Bmal1 were significantly up-regulated in RIN-14B cells compared with the negative control group(all P<0.001);while transfected with Bmal1 siRNA significantly decreased the mRNA and protein expression of Bmal1 in RIN-14B cells compared with the negative control group(all P<0.05).(3)After transfected with Bmal1 overexpression plasmid,the mRNA and protein expression of Piezo1,the protein expression of TPH1,and the intracellular content of 5-HT were significantly increased(all P<0.051).(4)After transfected with Bmal siRNA,mRNA expression of Piezo1 and TPH1 in RIN-14B cells was significantly down-regulated(all P<0.05),and the protein expression of Piezo1,TPH1,the intracellular 5-HT content tended to be decreased by 21%,31%,and 10%,respectively.Conclusions:RIN-14B cells have the characteristics of rhythmic oscillation of circadian clock genes,and Bmal1 overexpression and underexpression EC models can be successfully established by using RIN-14B cells.Overexpression and underexpression of Bmal1 can lead to significant changes in the clock-controlled Piezo1-TPH1-5-HT signaling pathway,suggesting that Bmal1 can be expressed by clock-control signals through the Piezo1-TPH1 pathway.This suggests that Bmal1 may be involved in the development of visceral hypersensitivity in IBS through regulation of 5-HT synthesis by the clock-controlled gene Piezo1.