ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Objective:To establish a deployment management mode for life-supporting equipment,so as to provide reference for healthcare institutions in deployment management for equipment in responding public health emergencies.Methods:The existed problems of healthcare institutions in facing public health emergencies were analyzed.Based on evidence-based practices from domestic and international healthcare institutions in responding public health emergencies,and combined with the experiences of West China Hospital of Sichuan University in preventing and treating epidemic infection of public health emergencies,a scheme of deployment management of life-supporting equipment,and an assessment scheme that precisely matched mode and equipment for supporting respiratory were formulated.The ventilator-related medical consumables was standardly managed.A deployment management mode for life-supporting equipment was constructed to conduct deployment management for the using 293 non-invasive ventilators and 112 high-flow non-invasive respiratory humidification devices in our hospital from December 26,2022,to January 20,2023.Results:During the period of deployment management for 293 non-invasive ventilators,a total of 7492 prescriptions of non-invasive ventilation were completed,and 3183 prescriptions of non-invasive(high-follow)ventilation of using 112 high-flow non-invasive respiratory humidification devices were completed at the same period,which better ensured the requirements of all patients in clinical treatment.The average turnaround time of equipment was shorted from 22.5 min before deployment management mode was implemented to 12.6 min after it was implemented.The accuracy rate of healthcare personnel was 100%in preparing medical consumables.Conclusion:The deployment management mode of life-supporting equipment can increase the use rate of limited life-supporting equipment at the maximum degree,and increase the turnover efficiency of equipment,and decrease turnover time and vacancy rate of equipment,and increase the accuracy rate of preparing medical consumables,and meet the requirement of clinical treatment under the premise of"overall deployment and coordinated management".

Objective To investigate the clinical efficacy and safety of facilitated percutaneous coronary intervention(PCI)with half-dose recombinant staphylokinase(r-SAK)in patients with ST-segment elevation myocardial infarction(STEMI)who are expected to undergo PCI within 120 minutes.Methods From October 2021 to August 2022,a total of 200 STEMI patients in eight centers were included and randomly assigned in a 1﹕1 ratio to either r-SAK group or control group.Patients received loading doses of aspirin and ticagrelor and intravenous heparin and were randomized to receive an intravenous bolus of either 5 mg r-SAK or normal saline prior to PCI.The outcomes were set as ST-segment resolution(STR)at 60-90 minutes after PCI,the proportion and transition of pathological Q waves on the 5th day after PCI,and the proportion of high-sensitivity cardiac troponin T(hs-cTnT)peaking within 12 hours of onset.The safety outcome was major bleeding events defined as Bleeding Academic Research Consortium(BARC)≥type 3 bleeding during hospitalization.Results Compared with the control group,the r-SAK group had a higher proportion of STR≥70%within 60-90 minutes after PCI(58.3%vs.40.3%,P=0.009);a lower proportion of pathological Q waves(59.1%vs.74.1%,P=0.040);a lower rate of Q wave progression(14.8%vs.43.2%,P＜0.001);a higher rate of Q wave disappearance(12.5%vs.3.7%,P=0.027);and a higher proportion of hs-cTnT peaking within 12 hours of symptom onset[31/40(77.5%)vs.17/33(51.5%),P=0.027].Regarding the safety outcome,no significant difference in BARC≥type 3 bleeding was found between the two groups during hospitalization(P＞0.05).Conclusions For STEMI patients who were expected to undergo primary PCI within 120 minutes of symptom onset,the facilitated PCI with half-dose r-SAK significantly increased the proportion of STR≥70%at 60-90 minutes after PCI,reduced the formation of pathological Q waves,and shortened the time to peak hs-cTnT,without increasing the risk of bleeding,which should be an alternative reperfusion strategy worthy of further study.

Objective To investigate the clinical efficacy and safety of facilitated percutaneous coronary intervention(PCI)with half-dose recombinant staphylokinase(r-SAK)in patients with ST-segment elevation myocardial infarction(STEMI)who are expected to undergo PCI within 120 minutes.Methods From October 2021 to August 2022,a total of 200 STEMI patients in eight centers were included and randomly assigned in a 1﹕1 ratio to either r-SAK group or control group.Patients received loading doses of aspirin and ticagrelor and intravenous heparin and were randomized to receive an intravenous bolus of either 5 mg r-SAK or normal saline prior to PCI.The outcomes were set as ST-segment resolution(STR)at 60-90 minutes after PCI,the proportion and transition of pathological Q waves on the 5th day after PCI,and the proportion of high-sensitivity cardiac troponin T(hs-cTnT)peaking within 12 hours of onset.The safety outcome was major bleeding events defined as Bleeding Academic Research Consortium(BARC)≥type 3 bleeding during hospitalization.Results Compared with the control group,the r-SAK group had a higher proportion of STR≥70%within 60-90 minutes after PCI(58.3%vs.40.3%,P=0.009);a lower proportion of pathological Q waves(59.1%vs.74.1%,P=0.040);a lower rate of Q wave progression(14.8%vs.43.2%,P＜0.001);a higher rate of Q wave disappearance(12.5%vs.3.7%,P=0.027);and a higher proportion of hs-cTnT peaking within 12 hours of symptom onset[31/40(77.5%)vs.17/33(51.5%),P=0.027].Regarding the safety outcome,no significant difference in BARC≥type 3 bleeding was found between the two groups during hospitalization(P＞0.05).Conclusions For STEMI patients who were expected to undergo primary PCI within 120 minutes of symptom onset,the facilitated PCI with half-dose r-SAK significantly increased the proportion of STR≥70%at 60-90 minutes after PCI,reduced the formation of pathological Q waves,and shortened the time to peak hs-cTnT,without increasing the risk of bleeding,which should be an alternative reperfusion strategy worthy of further study.

The lab module of exploratory experiment is newly designed in the practical course of bio-chemistry.Here we describe one of the experimental projects,and it originates from new scientific re-search results on the dynamic structure of ATP synthase.This exploratory experiment is organized in the form of real scientific research,which would fully mobilize the initiative and creativity of students in learning theoretical knowledge and experimental technology.Students work in groups and start with refer-ence reading.Through cooperation,they must develop certain experimental plan,handle samples with photocrosslinking technique and utilize the high-throughput electrophoresis method to analyze the dynamic structural change of ε subunit in ATP synthase under different physiological conditions.High quality re-sults from high-throughput electrophoresis can only be obtained through optimized operation and treat-ment,from which students would experience the process of technological innovation.The teaching process of this lab module embodies the student-centered teaching concept and is widely approved and supported by students.The project of ATP synthase closely combines the content of lab course with cut-ting-edge technology.Students can deeply experience the importance of experimental technology innova-tion in solving scientific problems.The practical ability of students would be comprehensively improved through this lab module.

Objective To explore the differences in coronary-based and lesion-based fat attenuation index(FAI)in patients with coronary artery disease(CAD)across different risk stratifications,and to compare the diagnostic efficiency of coronary-based and lesion-based FAI in stable CAD patients with myocardial ischemia.Methods The patients with CAD,who underwent preoperative coronary CT angiography(CCTA)and invasive coronary angiography(ICA)with coronary fractional flow reserve(FFR)measurement between Apr 2019 and Oct 2022 in Zhongshan Hospital,Fudan University,were retrospectively collected.There were 57 cases of acute coronary syndrome(ACS)patients and 206 cases of stable CAD patients included following inclusion criteria.The coronary-based and lesion-based FAI were measured,and the differences in these indices were recorded and analyzed among ACS patients,ischemic and non-ischemic groups of stable CAD patients(FFR=0.8 as the threshold).ROC curves were utilized to assess the diagnostic efficiency of coronary-based and lesion-based FAI for myocardial ischemia in stable CAD patients.Results The coronary-based FAI and lesion-based FAI in ACS patients were significantly higher than those in stable CAD patients[coronary-based FAI:(-72.40±6.83)HU vs.(-76.82±9.01)HU,P<0.001;lesion-based FAI:(-65.65±4.79)HU vs.(-77.48±8.64)HU,P<0.001].Among stable CAD patients,the lesion-based FAI in the ischemic group was significantly higher than that in the non-ischemic group[(-69.28±5.65)HU vs.(-80.10±7.75)HU,P<0.001].The diagnostic efficiency of lesion-based FAI for predicting myocardial ischemia in stable CAD patients was superior to coronary-based FAI(AUC:0.892 vs.0.525,Z=9.803,P<0.001).Conclusion Coronary-based and lesion-based FAI tended to be higher in ACS patients than in stable CAD patients,suggesting a potential for stratifying CAD patients with different risks.Lesion-based FAI showed some promise in evaluating myocardial ischemia among stable CAD patients.

ObjectiveTo explore the possible mechanisms of electroacupuncture at Fengchi （GB 20）， Waiguan （TE 5）， and Yanglingquan （GB 34） in treating chronic migraine from the perspective of nociceptive sensitization. MethodsForty SPF-grade SD rats were randomly divided into blank group， model group， electroacupuncture group， electroacupuncture + agonist group， and inhibitor group， with 8 rats in each group. Except for the blank group， rats were injected intraperitoneally with nitroglycerin to establish a chronic migraine rat model. After successful modeling， the electroacupuncture group received electroacupuncture at bilateral "Fengchi" （GB 20）， "Waiguan" （TE 5）， and "Yanglingquan" （GB 34） for 30 minutes each session. The electroacupuncture + agonist group received the same electroacupuncture treatment and additional injection of protein kinase C （PKC） agonist Phorbol 12-myristate 13-acetate （1.0 ng/μl， 25 μl） via the infraorbital foramen. The inhibitor group received PKC inhibitor Chelerythrine Chloride （1.0 ng/μl， 10 μl） via the infraorbital foramen. The blank group， model group， and inhibitor group underwent restraint for 30 minutes without other interventions. All groups were continuously intervened for 5 days. After the intervention， the nociceptive thresholds （mechanical and thermal pain） of the periorbital area and hind paw were measured. The expression levels of transient receptor potential vanillic acid subtype 1 （TRPV1）， phosphorylated TRPV1 （p-TRPV1）， PKC proteins， Trpv1， Pkc mRNA， and the average fluorescence intensity of transient receptor potential vanillic acid subtype 1 （TRPV1） and PKC in the trigeminal ganglion were detected using Western Blot， real-time fluorescence quantitative PCR， and immunofluorescence methods. ResultsCompared with the blank group， the mechanical and thermal pain thresholds of the periorbital area and hind paw were reduced in the model group， and the protein levels of TRPV1， PKC， p-TRPV1， as well as the mRNA expression of Trpv1 and Pkc， and the average fluorescence intensity of TRPV1 and PKC in the trigeminal ganglion significantly increased （P＜0.05 or P＜0.01）. Compared with the model group， the electroacupuncture group exhibited increased mechanical and thermal pain thresholds in the periorbital and hind paw areas， and decreased protein levels of TRPV1， PKC， p-TRPV1， mRNA expression of Trpv1 and Pkc， and average fluorescence intensity of TRPV1. In the electroacupuncture + agonist group， the average fluorescence intensity of TRPV1 in the trigeminal ganglion decreased. The inhibitor group exhibited increased mechanical pain thresholds in the periorbital area and thermal pain thresholds in the hind paw， along with decreased protein levels of TRPV1， PKC， p-TRPV1， and the average fluorescence intensity of TRPV1 and PKC （P＜0.05 or P＜0.01）. Compared with the electroacupuncture group， the electroacupuncture + agonist group showed an increase in the protein levels of TRPV1， PKC， p-TRPV1， and the mRNA expression of Trpv1 （P＜0.05 or P＜0.01）. ConclusionElectroacupuncture at the "Fengchi" （GB 20）， "Waiguan" （TE 5）， and "Yanglingquan" （GB 34） acupoints can increase the mechanical and thermal pain thresholds in chronic migraine rats and alleviate nociceptive sensitization. The mechanism may be related to the inhibition of PKC/TRPV1 pathway.

Objective To explore the differences in coronary-based and lesion-based fat attenuation index(FAI)in patients with coronary artery disease(CAD)across different risk stratifications,and to compare the diagnostic efficiency of coronary-based and lesion-based FAI in stable CAD patients with myocardial ischemia.Methods The patients with CAD,who underwent preoperative coronary CT angiography(CCTA)and invasive coronary angiography(ICA)with coronary fractional flow reserve(FFR)measurement between Apr 2019 and Oct 2022 in Zhongshan Hospital,Fudan University,were retrospectively collected.There were 57 cases of acute coronary syndrome(ACS)patients and 206 cases of stable CAD patients included following inclusion criteria.The coronary-based and lesion-based FAI were measured,and the differences in these indices were recorded and analyzed among ACS patients,ischemic and non-ischemic groups of stable CAD patients(FFR=0.8 as the threshold).ROC curves were utilized to assess the diagnostic efficiency of coronary-based and lesion-based FAI for myocardial ischemia in stable CAD patients.Results The coronary-based FAI and lesion-based FAI in ACS patients were significantly higher than those in stable CAD patients[coronary-based FAI:(-72.40±6.83)HU vs.(-76.82±9.01)HU,P<0.001;lesion-based FAI:(-65.65±4.79)HU vs.(-77.48±8.64)HU,P<0.001].Among stable CAD patients,the lesion-based FAI in the ischemic group was significantly higher than that in the non-ischemic group[(-69.28±5.65)HU vs.(-80.10±7.75)HU,P<0.001].The diagnostic efficiency of lesion-based FAI for predicting myocardial ischemia in stable CAD patients was superior to coronary-based FAI(AUC:0.892 vs.0.525,Z=9.803,P<0.001).Conclusion Coronary-based and lesion-based FAI tended to be higher in ACS patients than in stable CAD patients,suggesting a potential for stratifying CAD patients with different risks.Lesion-based FAI showed some promise in evaluating myocardial ischemia among stable CAD patients.

The lab module of exploratory experiment is newly designed in the practical course of bio-chemistry.Here we describe one of the experimental projects,and it originates from new scientific re-search results on the dynamic structure of ATP synthase.This exploratory experiment is organized in the form of real scientific research,which would fully mobilize the initiative and creativity of students in learning theoretical knowledge and experimental technology.Students work in groups and start with refer-ence reading.Through cooperation,they must develop certain experimental plan,handle samples with photocrosslinking technique and utilize the high-throughput electrophoresis method to analyze the dynamic structural change of ε subunit in ATP synthase under different physiological conditions.High quality re-sults from high-throughput electrophoresis can only be obtained through optimized operation and treat-ment,from which students would experience the process of technological innovation.The teaching process of this lab module embodies the student-centered teaching concept and is widely approved and supported by students.The project of ATP synthase closely combines the content of lab course with cut-ting-edge technology.Students can deeply experience the importance of experimental technology innova-tion in solving scientific problems.The practical ability of students would be comprehensively improved through this lab module.

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size