Protrusive facial deformities, characterized by the forward displacement of the teeth and/or jaws beyond the normal range, affect a considerable portion of the population. The manifestations and morphological mechanisms of protrusive facial deformities are complex and diverse, requiring orthodontists to possess a high level of theoretical knowledge and practical experience in the relevant orthodontic field. To further optimize the correction of protrusive facial deformities, this consensus proposes that the morphological mechanisms and diagnosis of protrusive facial deformities should be analyzed and judged from multiple dimensions and factors to accurately formulate treatment plans. It emphasizes the use of orthodontic strategies, including jaw growth modification, tooth extraction or non-extraction for anterior teeth retraction, and maxillofacial vertical control. These strategies aim to reduce anterior teeth and lip protrusion, increase chin prominence, harmonize nasolabial and chin-lip relationships, and improve the facial profile of patients with protrusive facial deformities. For severe skeletal protrusive facial deformities, orthodontic-orthognathic combined treatment may be suggested. This consensus summarizes the theoretical knowledge and clinical experience of numerous renowned oral experts nationwide, offering reference strategies for the correction of protrusive facial deformities.
Humans ; Orthodontics, Corrective/methods* ; Consensus ; Malocclusion/therapy* ; Patient Care Planning ; Cephalometry

The prevalence of Class III malocclusion varies among different countries and regions. The populations from Southeast Asian countries (Chinese and Malaysian) showed the highest prevalence rate of 15.8%, which can seriously affect oral function, facial appearance, and mental health. As anterior crossbite tends to worsen with growth, early orthodontic treatment can harness growth potential to normalize maxillofacial development or reduce skeletal malformation severity, thereby reducing the difficulty and shortening the treatment cycle of later-stage treatment. This is beneficial for the physical and mental growth of children. Therefore, early orthodontic treatment for Class III malocclusion is particularly important. Determining the optimal timing for early orthodontic treatment requires a comprehensive assessment of clinical manifestations, dental age, and skeletal age, and can lead to better results with less effort. Currently, standardized treatment guidelines for early orthodontic treatment of Class III malocclusion are lacking. This review provides a comprehensive summary of the etiology, clinical manifestations, classification, and early orthodontic techniques for Class III malocclusion, along with systematic discussions on selecting early treatment plans. The purpose of this expert consensus is to standardize clinical practices and improve the treatment outcomes of Class III malocclusion through early orthodontic treatment.
Humans ; Malocclusion, Angle Class III/classification* ; Orthodontics, Corrective/methods* ; Consensus ; Child

Objective To investigate the expression of cysteine rich protein 2 binding protein(CSRP2BP)mRNA and estrogen related receptors β(ESRRB)mRNA and protein in cervical cancer tissues and their correlation with epithelial mesenchymal transition(EMT)and clinical prognosis.Methods A total of 106 cervical cancer patients admitted to Yan'an Traditional Chinese Medicine Hospital from March 2018 to March 2020 were selected.Real time fluorescence quantitative PCR(RT-qPCR)was used to detect CSRP2BP mRNA,ESRRB mRNA and EMT related indicators[E-cadherin(E-cad),N-cadherin(N-cad),snail family transcriptional repressor 1(Snail)].Immunohistochemistry was used to detect the CSRP2BP protein and ESRRB protein expression in tissues.Pearson correlation analysis was used to analyze the correlation between CSRP2BP mRNA,ESRRB mRNA and EMT related indicators.Kaplan-Meier curve and COX regression were used to analyze the effect of CSRP2BP mRNA and ESRRB mRNA expression on the prognosis of cervical cancer patients.Results CSRP2BP mRNA(3.14±0.52 vs 1.22±0.21)expression and protein positive rate(86.79%vs 9.43%),ESRRB mRNA expression(2.86±0.31 vs 1.06±0.20)and protein positive rate(92.45%vs 8.49%),N-cad mRNA(3.22±0.43 vs 1.05±0.26)and Snail mRNA(2.67±0.36 vs 0.69±0.17)expression in cancer tissues were higher than those in adjacent tissues,while E-cad mRNA(0.84±0.17 vs 2.15±0.24)expression was lower than that in adjacent tissues,and the differences were statistically significant(t/x2=34.249,127.049;50.234,149.466;44.461,51.204,45.858,all P<0.001).The expression of CSRP2BP mRNA and ESRRB mRNA in cervical cancer was positively correlated with N-cad mRNA and Snail mRNA(r=0.663,0.731;0.726,0.715,all P<0.001),and was negatively correlated with E-cad mRNA(r=-0.594,-0.669,all P<0.001).The expression of CSRP2BP mRNA(4.48±0.36,4.21±0.37,4.69±0.33)and ESRRB mRNA(4.48±0.36,4.21±0.37,4.69±0.33)in cervical cancer tissues of patients with FIGO stage Ⅰ B2～Ⅱ A,poor differentiation and lymph node metastasis was higher than that of patients with FIGO stage ⅠA～ⅠB1(2.60±0.44,2.06±0.24),medium and high differentiation(2.43±0.44,2.01±0.25)and no lymph node metastasis(2.53±0.58,2.07±0.26),and the differences were statistically significant(t=16.327,41.135;18.507,36.545;14.501,43.806,all P<0.001).The 3-year overall survival rate of patients with high expression of CSRP2BP mRNA was 66.00%(33/50),which was lower than 89.29%(50/56)in the low expression group,while the 3-year overall survival rate of the high expression group of ESRRB mRNA was 65.38%(34/52),which was lower than 90.74%(49/54)of the low expression group,and the differences were statistically significant(Log rank x2=5.401,11.400,P=0.020,0.001).Multivariate Cox regression analysis showed that,CSRP2BP mRNA high expression(HR=1.327,95%CI:1.097～1.605),ESRRB mRNA high expression(HR=1.322,95%CI:1.108～1.577),FIGO stage Ⅰ B2～Ⅱ A(HR=1.423,95%CI:1.154～1.755),lymph node metastasis(HR=1.363,95%CI:1.095～1.698)and poor differentiation(HR=1.297,95%CI:1.064～1.581)were risk factors affecting the prognosis of cervical cancer patients(all P<0.001).Conclusion The increased expression of CSRP2BP mRNA and ESRRB mRNA in cervical cancer are related to EMT related indicators and adverse clinical and pathological features,and are new tumor markers for prognostic evaluation.

Objectives:To compare the biomechanical effects on the cervical spine between the insertion of a cervical interfacet self-locking cage(CILC)for anterior cervical interbody fusion and the insertion of a Zero-profile anterior cervical interbody fusion device(Zero-P)through the finite element method.Methods:Extracting the thin-layer cervical CT scan data of a 24-year-old male volunteer,and excluding any history of cervical spine trauma,surgery,cervical spondylosis,and imaging-diagnosed cervical spine deformities.Establishing a three-dimensional finite element model(blank model)of the normal lower cervical spine.The validity of the model was verified by comparing the range of motion(ROM)with those reported in previous studies.Based on this model,finite element models were constructed for single-segment posterior CILC insertion and fusion and Zero-P insertion and fusion.The surgical segment was set as the C4/5 segment,and CILC and Zero-P were implanted respectively to fuse and construct model.The lower endplate of the C7 vertebral body was fixed,and an axial load of 73.6N was applied to simulate the head's weight.A 1.0N·m torque was applied to the upper surface of the C2 vertebral body to simulate the overall movement of the C2-C7 finite element models,including flexion,extension,lateral bending,and axial rotation.The ROM of the segment and the stress changes in the adjacent segment intervertebral discs and facet joints were analyzed in all four motion directions for the blank model,CILC model,and Zero-P model.Results:The ROMs of the established three-dimensional finite element model of the lower cervical spine in all motion directions were consistent with previously published studies,therefore its validity was verified.Compared with the blank mod-el,the ROMs in all directions of the fusion segment was significantly reduced in both the CILC and Zero-P models.The ROM of the adjacent segments and the peak stress in the intervertebral discs and facet joints of the adjacent segments were higher in all motion directions compared with the blank model,with no significant difference in the degree of ROM increase between the CILC and Zero-P models.The peak stress increase in the intervertebral discs of adjacent segments in the CILC model was smaller than that in the Zero-P model.In the CILC model,the peak stress values of the C3/4 segment during flexion,extension,lateral bending,and rotation increased from pre-fixation values of 2.181,3.358,3.636,and 3.950MPa to post-fixation values of 2.532,3.881,4.463,and 4.917MPa,respectively.The peak stress values of the C5/6 segment during flexion,extension,lateral bending,and rotation increased from pre-fixation values of 1.558,3.996,3.778,and 3.660 MPa to post-fixation values of 1.864,4.131,4.183,and 4.266MPa,respectively.In the Zero-P model,the peak stress values of the C3/4 segment during flexion,extension,lateral bending,and rotation increased from preoperative values of 2.181,3.358,3.636,and 3.950MPa to 2.977,4.241,4.654,and 5.509MPa,respectively.The peak stress values of the C5/6 segment during flexion,extension,lateral bending,and rotation increased from pre-fixation values of 1.558,3.996,3.778,and 3.660MPa to post-fixation values of 2.314,5.214,4.469,and 4.739MPa,respectively.The peak stress increase in the adjacent facet joints in all motion directions was greater in the CILC model than in the Zero-P model.Conclusions:CILC insertion results in less impact on adjacent segment disc stress compared to Zero-P and provides reliable fixation,making it a suitable option for treating adjacent segment disease after cervical surgery.

Objective:To explore the clinical characteristics of poisoned patients with poisons purchase online.Methods:A retrospective case-control study was conducted on poisoned patients purchased poisons online from 1st January 2021 to 31th May 2022 in the Emergency Department of the First Affiliated Hospital of Nanjing Medical University. The clinical data including sex, age, way of medical treatment, cause of poisoning, exposure routes, category of toxic drugs, gastric lavage, toxic detection and prognosis of patients were collected and compared with those patients obtained poisons at stores as the control group.Results:Totally 318 poisoned patients were included in this study, of which 44 (13.8%) were obtained poisons online. Compared with the patients obtained poisons at stores, the patients obtained poisons online were younger ( P<0.001), and had higher proportion of suicide intention ( P=0.006), more oral route exposure ( P=0.029), and more proportions of receiving gastric lavage before transfer to the hospital ( P=0.001). Pesticides and fertilizers with organic heterocycles were the main types of poisons in the online group, and there was no statistical difference in the distribution of poisons compared with the control group. Mixed drug poisoning was the leading cause in both online group (27.8%) and control group (38.8%) in drug overdose poisoned types, followed by dextromethorphan (16.7%) and estazolam (15.5%) in the online group. Conclusions:Young people are the main group getting poisons through the Internet. Health education should be strengthened for this group, and online shopping platforms should pay attention to the poisoning risk of potential overdose drugs or poisons transactions.

Objective:To explore the clinical effect of the 3D printing pre-installed screw channel model in assisting screw placement of single complete segmented congenital hemivertebrectomy.Methods:Clinical data of 13 children treated with single complete segmented congenital hemivertebrectomy in the Department of Spine and Spinal Surgery of Henan Provincial People′s Hospital from August 2016 to January 2019 were retrospectively analyzed.Among them, there were 5 males and 8 females with the mean age of 9.9 (5-14) years.Categorized by the lesion location, 3 cases were located at T 9, 2 cases at T 10, 5 cases at T 11, 1 case at T 12, and 2 cases at L 1.During the operation, the 3D printing pre-installed screw channel model was used to assist the placement of pedicle screws.The accuracy of screw placement was assessed by the postoperative CT.All children were routinely examined by full-length anterior and lateral X-ray of spine in the standing position before and after surgery to measure the Cobb angles at the coronal and sagittal view.Furthermore, the correction rate of scoliosis and kyphosis after surgery and during follow-up was also calculated.The One-Way repeated measures ANOVA was used to compare the Cobb angle of scoliosis and kyphosis before surgery, after surgery and during follow-up. Results:A total of 85 pedicle screws were placed in 13 children, with the accuracy rate of screw placement of 95.3%.The mean surgery time and intraoperative blood loss were (216.9±28.3) min, and (478.5±132.6) mL, respectively.Scoliosis Cobb was corrected from (57.1±12.7)° to (12.7±4.7)° with a correction rate of (78.4±5.9)%, which was (14.2±7.0)° at the last follow-up.Kyphosis angle was corrected from (46.2±8.4)° to (13.2±4.4)° with a correction rate of (72.6±7.0)%, which was (14.0±3.4)° at the last follow-up.None of the children had serious complications like vascular and nerve damage.The mean postoperative follow-up was 12.3 (6-18) months.No significant loss of angle was detected during the follow-up period.There were significant differences in the lateral and kyphotic angles after surgery and during follow-up compared with preoperative ones (all P<0.05). No significant difference was detected between the postoperative lateral and kyphotic angles and those at the last follow-up (all P>0.05). Conclusion:The 3D printing pre-installed screw channel model used to assist screw placement of single complete segmented congenital hemivertebrectomy can improve the precision of screw placement and the orthopedic effect on lateral kyphosis.

Objective:To explore the accuracy and repeatability of the smartphone scoliosis screening APP developed by our team in the measurement of the Cobb angle of adolescent idiopathic scoliosis (AIS).Methods:Clinical data of 60 patients with AIS admitted to Department of Spine and Spinal Surgery, Henan Province People′s Hospital from August 2020 to February 2021 were analyzed retrospectively.Three surveyors measured the coronal main curvature Cobb angle, sagittal thoracic kyphosis (TK) angle, thoracolumbar kyphosis (TLK) angle and lumbar kyphosis (LL) angle on whole-spine lateral X-ray films of 60 patients with AIS by means of the protractor, scoliosis screening APP and computerized Picture Archiving and Communication System (PACS). The time and results of each measurement were recorded.The measurement was repeated once after 2 weeks.Paired t-test was used to compare the measurement time of the APP method and the protractor method.Taking the Cobb angle measurement results of the PACS system as the reference standard, the accuracy of Cobb angle measurement by the APP method was analyzed by paired t-test.The repeatability of the surveyor and the consistency between the surveyors was compared by intraclass correlation coefficient (ICC). Results:Among the 60 patients with AIS, there were 17 males and 43 females, aged from 10 to 16 years [(12.2±2.4) years]. The main bends were thoracic curvature (Lenke Ⅰ) in 23 cases, Lenke Ⅱ in 18 cases and thoracolumbar curvature/lumbar curvature (Lenke V) in 19 cases.The APP method took significantly less time to measure the Cobb angle than the protractor method ( P<0.05). There was no significant difference in the Cobb angle measured by the APP method and PACS method ( P>0.05). The results of the coronal main curvature Cobb angle, TK angle, TLK angle and LL angle measured by 3 surveyors through the APP method were all in good agreement (ICC=0.990, 0.988, 0.986, 0.987). The repeatability (ICC 0.973-0.982) of the coronal main curvature Cobb angle, TK, TLK and LL measured twice before and after the APP method were both better that of the protractor method (ICC 0.933-0.954). Conclusions:Compared with the traditional protractor, the smartphone scoliosis screening APP has the advantages of short measurement time, high efficiency, excellent accuracy and good repeatability in measuring the Cobb angle of AIS.

Objective:To analyze the postoperative paravertebral muscle degeneration and its correlations with health related quality of life (HRQL) in patients undergoing minimally invasive surgery-transforaminal lumbar interbody fusion (MIS-TLIF).Methods:The clinical data of the 50 patients were retrospectively analyzed who had undergone single-segmental MIS-TLIF at Department of Spinal Cord Surgery, The People's Hospital of Henan Province from January 2019 to December 2021. The relative volumes of lumbar posterior muscle (LM), the relative volumes of the psoas major (PM), and the rates of fatty degeneration (FD) of the fused segment and its adjacent segments were compared respectively between preoperation, 6 and 12 months postoperation. The correlations were analyzed between the HRQL scores [visual analog scale (VAS) for pain and Oswestry disability index (ODI)] and the relative LM volumes, the relative PM volumes, and the FD rates of the fused segment and its adjacent segments at 12 months postoperation.Results:Compared with the preoperative values, the relative LM volumes and the relative PM volumes of the fused segment and its adjacent segments at 6 and 12 months postoperation were significantly reduced while the FD rates significantly increased. However, the FD rate of the fused segment at 12 months postoperation (20.6% ± 6.1%) was significantly lower than that at 6 months postoperation (29.7% ± 8.2%) ( P < 0.05). The VAS score was strongly negatively or positively correlated with the relative LM volume ( r = -0.819, P < 0.001) and the FD rate ( r = 0.86, P < 0.001) of the fused segment, and moderately negatively correlated with the relative PM volume ( r = -0.435, P = 0.016). The ODI index was moderately negatively correlated with the relative LM volume ( r = -0.512, P = 0.004) and the relative PM volume ( r = -0.402, P = 0.020) of the fused segment, but moderately positively correlated with the FD rate of the fused segment ( r = 0.565, P = 0.001). There was a moderate negative correlation between the ODI index and the relative LM volume of the adjacent segments ( r = -0.478, P = 0.012). Conclusions:After MIS-TLIF, the volume of the paravertebral muscles decreases and the dorsal muscles develop fatty degeneration. The improvement of LM fatty degeneration may be observed by 12-month follow-up in the fused segment, but not in the adjacent segments. The LM volume and the FD rate of the fused segment are the most closely related to the postoperative HRQL.