Bullous hemorrhagic dermatosis (BHD) is a rare cutaneous manifestation characterized by tense hemorrhagic bullae that appear at sites distant from low molecular weight heparin (LMWH) injections, typically within seven days of exposure. As of March 2022, only 94 cases have been reported. It most commonly affects elderly males with predisposing factors for thromboembolism, such as carcinoma, and usually involves the extremities.

This case highlights the importance of maintaining a high index of suspicion for bullous hemorrhagic dermatosis (BHD) in patients receiving low molecular weight heparin, even beyond the typical 7-day window and in demographics not commonly affected. Early recognition and prompt discontinuation of the offending agent, as demonstrated in this atypical presentation involving a Filipino elderly woman with multiple comorbidities and no malignancy, can lead to favorable outcomes. Clinicians should be aware of this rare but reversible complication to avoid misdiagnosis and ensure appropriate management.

Human ; Female ; Aged: 65-79 Yrs Old ; Affect ; Aged ; Blister ; Carcinoma ; Causality ; Demography ; Diagnostic Errors ; Enoxaparin ; Extremities ; Heparin ; Heparin, Low-molecular-weight ; Index ; Injections ; Lead ; Male ; Molecular Weight ; Neoplasms ; Patients ; Research Report ; Skin Diseases ; Thromboembolism ; Women

Bariatric and metabolic surgery has become a primary treatment for decompensated obesity, with the number of procedures rapidly increasing in China in recent years. Various improved and novel surgical techniques have emerged. Given the characteristics of the Chinese obese population lower body mass index compared to Western populations and frequent pancreatic islet dysfunction laparoscopic Roux-en-Y gastric bypass remains one of the mainstream procedures in China. Although the Procedural Guideline for Laparoscopic Roux-en-Y Gastric Bypass (2019 Edition) has provided standardized surgical steps, mastering and routinely implementing the procedure in clinical practice continues to pose significant challenges. Compared to laparoscopic sleeve gastrectomy, laparoscopic Roux-en-Y gastric bypass is more technically demanding and requires a longer learning curve. To avoid suboptimal weight loss or severe postoperative complications resulting from non-standardized techniques, this article summarizes the authors' clinical experience, emphasizing key technical steps: creation of the gastric pouch, standardization of gastrojejunal and jejunojejunal anastomoses, hiatal closure, and full serosalization. These insights aim to improve procedural safety and therapeutic efficacy by offering a set of practical process optimization strategies.
Humans ; Gastric Bypass/methods* ; Laparoscopy/methods* ; Obesity, Morbid/surgery* ; Postoperative Complications/prevention & control* ; China ; Jejunum/surgery* ; Gastrectomy/methods* ; Anastomosis, Surgical/methods* ; Weight Loss

Large bone defects in load-bearing bone can result from tumor resection, osteomyelitis, trauma, and other factors. Although bone has the intrinsic potential to self-repair and regenerate, the repair of large bone defects which exceed a certain critical size remains a substantial clinical challenge. Traditionally, repair methods involve using autologous or allogeneic bone tissue to replace the lost bone tissue at defect sites, and autogenous bone grafting remains the "gold standard" treatment. However, the application of traditional bone grafts is limited by drawbacks such as the quantity of extractable bone, donor-site morbidities, and the risk of rejection. In recent years, the clinical demand for alternatives to traditional bone grafts has promoted the development of novel bone-grafting substitutes. In addition to osteoconductivity and osteoinductivity, optimal mechanical properties have recently been the focus of efforts to improve the treatment success of novel bone-grafting alternatives in load-bearing bone defects, but most biomaterial synthetic scaffolds cannot provide sufficient mechanical strength. A fundamental challenge is to find an appropriate balance between mechanical and tissue-regeneration requirements. In this review, the use of traditional bone grafts in load-bearing bone defects, as well as their advantages and disadvantages, is summarized and reviewed. Furthermore, we highlight recent development strategies for novel bone grafts appropriate for load-bearing bone defects based on substance, structural, and functional bionics to provide ideas and directions for future research.
Humans ; Bone Transplantation/methods* ; Weight-Bearing ; Bone Regeneration ; Bone Substitutes ; Bone and Bones ; Animals ; Tissue Scaffolds

OBJECTIVE: To explore the characteristics and rules of the locations of acupoints selected in weight loss after syndrome differentiation of acupuncture and moxibustion, and provide quantitative evidence for the location specificity of acupoint selection in weight loss. METHODS: Clinical research articles on acupoint selection based on syndrome differentiation of acupuncture and moxibustion in weight loss were retrieved in China National Knowledge Infrastructure (CNKI), from the inception to September 20th, 2024, and the data about acupoints and differentiated syndromes were extracted. Based on graph theory, the acupoint-syndrome network was established and its topological parameters such as node degree, value of betweenness centrality, description length and number of community were calculated. RESULTS: ①The description length of the limbs was 4 255.592, and that of the trunk was 3 274.312. The information contained in the acupoint-syndrome network for the acupoints on the limbs was greater than that for those on the trunk. ②The value of betweenness centrality and node degree showed a nonlinear relationship, with R²of 0.812 1 for the trunk and 0.321 8 for the limbs. The values of betweenness centrality for the acupoints on the trunk were uniformly distributed, and the difference among these values was much smaller than that for the acupoints on the limbs. It suggested that the distance from each trunk acupoint to network center was similar, and the importance among these acupoints to network was similar, while the importance among acupoints located on the limbs was different significantly. ③The frequency proportion of acupoints on the trunk showed uniform distribution among different syndromes, while that of some acupoints located on the limbs such as Taichong (LR3), Neiting (ST44) and Taixi (KI3) presented a correlation with the syndromes. CONCLUSION In weight loss with acupuncture and moxibustion, the correlation between the limb acupoints and syndromes is more diverse and specific than that between the trunk acupoints and syndromes. The differences in acupoint selection for simple obesity treated with acupuncture and moxibustion are mostly reflected in the acupoints on the four limbs rather than those on the trunk. It provides an approach to acupoint selection for "local weight loss" and "general regulation" in treatment with acupuncture and moxibustion.
Humans ; Acupuncture Points ; Moxibustion ; Weight Loss ; Acupuncture Therapy ; Obesity/physiopathology*

Humans ; Ductus Arteriosus, Patent/therapy* ; Infant, Newborn ; Infant, Very Low Birth Weight ; Cardiac Catheterization/adverse effects* ; Consensus ; Infant, Extremely Low Birth Weight ; Hemodynamics

The lumbar intervertebral disc exhibits a complex physiological structure with interactions between various segments, and its components are extremely complex. The material properties of different components in the lumbar intervertebral disc, especially the water content (undergoing dynamic change as influenced by age, degeneration, mechanical loading, and proteoglycan content) - critically determine its mechanical properties. When the lumbar intervertebral disc is under continuous pressure, water seeps out, and after the pressure is removed, water re-infiltrates. This dynamic fluid exchange process directly affects the mechanical properties of the lumbar intervertebral disc, while previous isotropic modeling methods have been unable to accurately reflect such solid-liquid phase behaviors. To explore the load-bearing mechanism of the lumbar intervertebral disc and establish a more realistic mechanical model of the lumbar intervertebral disc, this study developed a solid-liquid biphasic, fiber-reinforced finite element model. This model was used to simulate the four movements of the human lumbar spine in daily life, namely flexion, extension, axial rotation, and lateral bending. The fluid pressure, effective solid stress, and liquid pressure-bearing ratio of the annulus fibrosus and nucleus pulposus of different lumbar intervertebral discs were compared and analyzed under the movements. Under all the movements, the fluid pressure distribution was closer to the nucleus pulposus, while the effective solid stress distribution was more concentrated in the outer annulus fibrosus. In terms of fluid pressure, the maximum fluid pressure of the lumbar intervertebral disc during lateral bending was 1.95 MPa, significantly higher than the maximum fluid pressure under other movements. Meanwhile, the maximum effective solid stress of the lumbar intervertebral disc during flexion was 2.43 MPa, markedly higher than the maximum effective solid stress under other movements. Overall, the liquid pressure-bearing ratio under axial rotation was smaller than that under other movements. Based on the solid-liquid biphasic modeling method, this study more accurately revealed the dominant role of the liquid phase in the daily load-bearing process of the lumbar intervertebral disc and the solid-phase mechanical mechanism of the annulus fibrosus load-bearing, and more effectively predicted the solid-liquid phase co-load-bearing mechanism of the lumbar intervertebral disc in daily life.
Humans ; Finite Element Analysis ; Intervertebral Disc/physiology* ; Lumbar Vertebrae/physiology* ; Weight-Bearing/physiology* ; Biomechanical Phenomena ; Stress, Mechanical ; Computer Simulation ; Models, Biological

OBJECTIVE: To analyze the effectiveness of three internal fixation methods, namely hollow screw combined with Kirschner wire tension band, hollow screw combined with anchor nail, and modified 1/3 tubular steel plate, in the treatment of avulsion fracture of tibial tubercle (AFTT) in adolescents. METHODS: Between January 2018 and September 2023, 19 adolescent AFTT patients who met the selection criteria were admitted. According to different internal fixation methods, patients were divided into group A (8 cases, hollow screw combined with Kirschner wire tension band), group B (6 cases, hollow screw combined with anchor nail), and group C (5 cases, modified 1/3 tubular steel plate). There was no significant difference in the baseline data of age, gender, side, cause of injury, Ogden classification, and time from injury to operation among the three groups ( P>0.05). The range of motion (ROM), weight-bearing time, normal activity time of knee joint, and the hospital for special surgery (HSS) score at last follow-up were recorded and compared among the three groups. Recorded whether the fracture was displaced, whether the fracture line was blurred at 1 month after operation, whether there was epiphyseal dysplasia, and whether there was incision infection and other complications. RESULTS: There was no significant difference in hospital stay between the groups ( P>0.05). All patients were followed up 10-24 months, with an average of 14.3 months; there was no significant difference between the groups ( P>0.05). All the incisions healed well without soft tissue irritation or fracture nonunion, and no limb shortening deformity or epiphyseal dysplasia was found during follow-up. At 1 month after operation, the knee joint ROM and hospitalization expenses in group A were better than those in groups B and C, the fracture healing time, knee joint weight-bearing time, and normal activity time of knee joint were better than those in group C, and the hospitalization expenses in group C were better than those in group B, with significant differences ( P<0.05); there was no significant difference in the other indicators between the groups ( P>0.05). In group A, the fracture line was blurred 1 month postoperatively, the fracture ends were in close contact, and there was no fracture displacement; in groups B and C, the fracture line was clear in 2 cases, and 1 case in group C had slight fracture displacement; except for 1 case in group B, there was no fracture split in the other two groups. There was no significant difference in the incidences of blur of fracture line, fracture displacement, and intraoperative bone split between the groups at 1 month after operation ( P>0.05). At last follow-up, the HSS scores of knee joints in the three groups were excellent and good, and there was no significant difference between the groups ( P>0.05). CONCLUSION Hollow screw combined with Kirschner wire tension band technique is effective in treating adolescent AFTT, which has the advantages of stabilizing fracture, accelerating fracture healing and rehabilitation, early feasible knee joint functional exercise, and reducing hospitalization expenses.
Humans ; Tibial Fractures/surgery* ; Adolescent ; Male ; Fracture Fixation, Internal/instrumentation* ; Female ; Fractures, Avulsion/surgery* ; Bone Wires ; Bone Screws ; Bone Plates ; Treatment Outcome ; Range of Motion, Articular ; Bone Nails ; Weight-Bearing ; Fracture Healing

OBJECTIVE: To investigate the impact of bone mass and volume of low-density zones beneath the tibial plateau on the maximum von Mises stresses experienced by the cartilage and meniscus in the knee joint. METHODS: The study included one healthy adult volunteer, from whom CT scans were obtained, and one patient diagnosed with knee osteoarthrisis (KOA), for whom X-ray films were acquired. A static model of the knee joint featuring a low-density zone was established based on a normal knee model. In the finite element analysis, axial loads of 1 000 N and 1 800 N were applied to the weight-bearing region of the upper surface of the femoral head for model validation and subsequent finite element studies, respectively. The maximum von Mises stresses in the femoral cartilage, as well as the medial and lateral tibial cartilage and menisci, were observed, and the stress percentage of the medial and lateral components were concurrently analyzed. Additionally, HE staining, as well as alkaline magenta staining, were performed on the pathological specimens of patients with KOA in various low-density regions. RESULTS: The results of model validation indicated that the model was consistent with normal anatomical structures and correlated with previous calculations documented in the literature. Static analysis revealed that the maximum von Mises stress in the medial component of the normal knee was the lowest and increased with the advancement of the hypointensity zone. In contrast, the lateral component exhibited an opposing trend, with the maximum von Mises stress in the lateral component being the highest and decreasing as the hypointensity zone progressed. Additionally, the medial component experienced an increasing proportion of stress within the overall knee joint. HE staining demonstrated that the chondrocyte layer progressively deteriorated and may even disappear as the hypointensity zone expanded. Furthermore, alkaline magenta staining indicated that the severity of microfractures in the trabecular bone increased concurrently with the expansion of the hypointensity zone. CONCLUSION The presence of subtalar plateau low-density zone may aggravate joint degeneration. In clinical practice, it is necessary to pay attention to the changes in the subtalar plateau low-density zone and actively take effective measures to strengthen the bone status of the subtalar plateau low-density zone and restore the complete biomechanical function of the knee joint, in order to slow down or reverse the progression of osteoarthritis.
Humans ; Finite Element Analysis ; Knee Joint/physiology* ; Tibia/anatomy & histology* ; Cartilage, Articular/physiology* ; Menisci, Tibial/physiopathology* ; Tomography, X-Ray Computed ; Osteoarthritis, Knee/diagnostic imaging* ; Weight-Bearing ; Bone Density ; Adult ; Stress, Mechanical ; Male ; Middle Aged ; Biomechanical Phenomena ; Female

OBJECTIVE: To investigate the load distribution on the more painful and less painful limbs in patients with mild-to-moderate and severe bilateral knee osteoarthritis (KOA) and explore the compensatory mechanisms in both limbs among bilateral KOA patients with different severity levels. METHODS: A total of 113 participants were enrolled between July 2022 and September 2023. This cohort comprised 43 patients with mild-to-moderate bilateral KOA (Kellgren-Lawrence grade 2-3), 43 patients with severe bilateral KOA (Kellgren-Lawrence grade 4), and 27 healthy volunteers (healthy control group). The visual analogue scale (VAS) score for pain, the Hospital for Special Surgery (HSS) score, passive knee range of motion (ROM), and hip-knee-ankle angle (HKA) were used to assess walking pain intensity, joint function, and lower limb alignment in KOA patients, respectively. Motion trajectories of reflective markers and ground reaction force data during walking were captured using a gait analysis system. Musculoskeletal modeling was then employed to calculate biomechanical parameters, including the peak knee adduction moment (KAM), KAM impulse, peak joint contact force (JCF), and peak medial/lateral contact forces (MCF/LCF). Statistical analyses were performed to compare differences in clinical and gait parameters between bilateral limbs. Additionally, one-dimensional statistical parametric mapping was utilized to analyze temporal gait data. RESULTS: Mild-to-moderate KOA patients showed the significantly higher HSS score (67.7±7.9) than severe KOA patients (51.9±8.9; t=8.747, P<0.001). The more painful limb in all KOA patients exhibited significantly greater HKA and higher VAS scores compared to the less painful limb ( P<0.05). While bilateral knee ROM did not differ significantly in mild-to-moderate KOA patients ( P>0.05), the severe KOA patients had significantly reduced ROM in the more painful limb versus the less painful limb ( P<0.05). Healthy controls showed no significant bilateral difference in any biomechanical parameters ( P>0.05). All KOA patients demonstrated longer stance time on the less painful limb ( P<0.05). Critically, severe KOA patients exhibited significantly higher peak KAM, KAM impulse, and peak MCF in the more painful limb ( P<0.05), while mild-to-moderate KOA patients showed the opposite pattern with lower peak KAM and KAM impulse in the more painful limb ( P<0.05) and a similar trend for peak MCF. CONCLUSION Patients with mild-to-moderate KOA effectively reduce load on the more painful limb through compensatory mechanisms in the less painful limb. Conversely, severe bilateral varus deformities in advanced KOA patients nullify compensatory capacity in the less painful limb, paradoxically increasing load on the more painful limb. This dichotomy necessitates personalized management strategies tailored to disease severity.
Humans ; Osteoarthritis, Knee/physiopathology* ; Range of Motion, Articular ; Male ; Female ; Middle Aged ; Biomechanical Phenomena ; Knee Joint/physiopathology* ; Pain Measurement ; Severity of Illness Index ; Aged ; Gait/physiology* ; Walking/physiology* ; Case-Control Studies ; Adult ; Weight-Bearing

OBJECTIVE: To investigate the effectiveness of applying a standardized rehabilitation process in correction of adult clubfoot with the Ilizarov technique. METHODS: Thirty-eight adult patients who underwent orthopedic treatment with Ilizarov technique for clubfoot between August 2022 and December 2024 were retrospectively analyzed. The patients were divided into a study group and a control group with 19 cases in each group according to the different rehabilitation management processes and methods. The differences in baseline data such as gender, age, side, and preoperative Holden walking function grading between the two groups were not significant ( P>0.05). In both groups, most of the clubfoot deformities were surgically corrected first, and the residual deformities were corrected by dynamic slow retraction with Ilizarov ring-type external fixation frame. The study group adopted standardized rehabilitation process management mode, including preoperative lower limb muscle strength training, postoperative pain and swelling management, weight-bearing management, gait and lower limb stability training. The control group adopted the conventional postoperative rehabilitation management mode. The occurrence of complications was recorded, including pin tract infection, ankle stiffness and pain, and deformity recurrence. Holden walking function grading was used to evaluate the walking ability of the patients. Clinical efficacy was evaluated by the QIN Sihe Deformity Correction Disability Repair and Functional Reconstruction Postoperative Efficacy Evaluation Scale. Patient satisfaction was evaluated by Likert score. RESULTS: Patients in both groups successfully completed surgery and rehabilitation and were followed up. The follow-up time ranged from 8 to 29 months, with a mean of 18.5 months. Among them, the follow-up time was (18.8±5.5) months in the study group and (18.2±5.7) months in the control group, and the difference between groups was not significant ( t=0.316, P=0.754). The postoperative incidences of pin tract infection, ankle stiffness and pain, and deformity recurrence in the study group were 10.53%, 5.26%, and 5.26%, respectively, and in the control group were 21.05%, 36.84%, and 15.79%, respectively. And the difference between groups in the incidence of ankle stiffness and pain was significant ( P=0.042). At last follow-up, both groups showed an improvement in Holden walking function grading compared to preoperative levels ( P<0.05), and the grading of the study group was significantly higher than that of the control group ( P=0.006). According to the QIN Sihe Deformity Correction Disability Repair and Functional Reconstruction Postoperative Efficacy Evaluation Scale, the grade difference between groups was not significant ( P=0.089), and the excellent and good rates of clinical efficacy in study group and control group were 89.47% (17/19) and 73.68% (14/19), respectively. Patient satisfaction in study group was significantly better than that in control group ( P=0.036). CONCLUSION Standardized rehabilitation process can effectively promote the postoperative functional recovery of adult clubfoot treated with Ilizarov technique, reduce the risk of complications and improve effectiveness.
Humans ; Ilizarov Technique/rehabilitation* ; Clubfoot/rehabilitation* ; Male ; Female ; Retrospective Studies ; Adult ; Treatment Outcome ; Young Adult ; Weight-Bearing ; Adolescent