ObjectiveTo evaluate the predictive value of epicardial adipose tissue （EAT） parameters for microvascular obstruction （MVO） formation in patients with ST segment elevation myocardial infarction （STEMI） using cardiac magnetic resonance quantification. MethodsA total of 139 STEMI patients were included in this study， and various parameters such as EAT thickness， volume， and mass index were measured utilizing cardiac magnetic resonance. All included patients were divided into MVO group and non-MVO group according to whether MVO occurred. Differences in EAT related parameters between two groups were compared and correlation analysis was applied to evaluate the correlation between quantitative indicators of EAT and indicators such as infarct size and ejection fraction. Logistic regression analysis was used to identify the relevant risk factors for MVO formation. Receiver Operating Characteristic （ROC） curve analysis was performed to assess the predictive value of the epicardial adipose tissue （EAT） quality index and other indicators for the occurrence of MVO. ResultsCompared with non MVO group， patients in MVO group presented with higher peak troponin T levels， increase of neutrophil lymphocyte ratio （NLR） and C-reactive protein （CRP）， larger infarct size and compromised left ventricular ejection fraction （LVEF） （P<0.05）. Total EAT volume， EAT mass index， left atrioventricular EAT volume， left atrioventricular EAT mass index and thickness of EAT in the left atrioventricular groove were significantly higher in patients with MVO. Multivariate Logistic regression analysis demonstrated that NLR， peak troponin T levels and left atrioventricular EAT mass index were independent predictors of MVO. The ROC curve suggested that the left atrioventricular EAT mass index had the highest predictive power for MVO formation in STEMI patients. ConclusionThe parameters of EAT quantified by cardiac magnetic resonance serve as imaging biomarkers for predicting MVO formation in STEMI patients. These metrics enable risk stratification post-myocardial infarction and facilitate early identification of high-risk individuals， thereby supporting personalized therapeutic decision-making.

Objective: To investigate the correlation between color parameters (L^*, a^*, b^*, Eab^*) and the contents of reducing sugars, total polysaccharides, total oligosaccharides, as well as four saccharides (fructose, glucose, sucrose, and kestose) during the nine cycles of steaming and sun-drying processing of Polygonatum kingianum, and to preliminarily explore the optimal processing duration.
Methods: The color changes were objectively evaluated using a colorimeter. The anthrone-sulfuric acid method was employed to determine total polysaccharides and oligosaccharides. The 3,5-dinitrosalicylic acid (DNS) colorimetric method was used to measure total reducing sugar content. High-performance liquid chromatography coupled with charged aerosol detection (HPLC-CAD) was applied for quantitative analysis of fructose, glucose, sucrose, and kestose. Multivariate statistical analysis was conducted to assess samples from different processing stages.
Results: Significant variations in color and component contents were observed across processing stages. The herbal pieces progressively darkened with increased processing cycles: brightness (L^*) and total color difference (Eab^*) initially decreased then stabilized, while a^* (red-green) and b^* (yellow-blue) values first increased then declined. Total polysaccharides and oligosaccharides showed overall decreasing trends, whereas reducing sugars initially increased before stabilizing. Fructose and glucose levels rose continuously, while sucrose and kestose decreased progressively, becoming undetectable after five cycles.
Conclusion: The chromatic alteration and saccharide composition of P. kingianum showed significant correlation with processing duration. Both total color difference (Eab^*) and reducing sugar content stabilized after four processing cycles (12 hours), suggesting that four cycles of steaming and sun-drying may represent the optimal processing duration.

Objective: To investigate the correlation between the color parameters (L^*, a^*, b^*, Eab^* values) of Polygoni Multiflori Radix Praeparata powder prepared by different processing techniques and the contents of 2,3,5,4’-tetrahydroxystilbene-2-O-β-D-glucopyranoside, emodin, physcion, emodin-8-O-β-D-glucopyranoside, physcion-8-O-β-D-glucopyranoside.
Methods: The L^*, a^*, b^* and Eab^* values of Polygoni Multiflori Radix Praeparata powder prepared by different processing techniques were determined by spectrophotometer, and the contents of the five components were determined by high performance liquid chromatography. Secondly, SPSS 26.0 software and Simca 14.1 software were used to analyze the correlation.
Results: Through the hierarchical cluster analysis (HCA), it was found that the steamed samples and black bean steamed samples could be obviously divided into two categories: raw products and processed products. The processed products could be further divided into 2-8 h and 12-48 h. Pearson correlation analysis showed that the content of stilbene glycoside was significantly positively correlated with L^*, a^* and b^* values (P<0.01). The a^* value was significantly positively correlated with the content of emodin and physcion (P<0.01). Emodin-8-O-β-D-glucoside was positively correlated with L^* value and b^* value, while physcion-8-O-β-D-glucoside was negatively correlated with a^* value. Partial least squares discriminant analysis (PLS) showed that 2,3,5,4’-tetrahydroxystilbene-2-O-β-D-glucoside (VIP=1.69) and emodin-8-O-β-D-glucoside (VIP=1.06) were the key variables affecting chromaticity characteristics (P<0.01).
Conclusion: The three processes of steaming, black bean steaming and black bean stewing are consistent in composition transformation and chromaticity variation, and stilbene glycoside can be used as a specific index component to characterize the processed color. Chromatic parameters can effectively reflect the processing progression and serve as quality monitoring indicators during production.

Objective This study reports on the obligatory parasitism of water mites Arrenurus sp. on Anopheles messeae at the Manzhouli Port, Inner Mongolia, China. Methods Duing July 2024, a survey on the mosquito diversity was conducted at the Manzhouli Port. Captured mosquitoes and their ectoparasites were identified to species level. Results A total of 1840 adult mosquitoes were collected, representing species from three genera: Culex(Cx. modestus, Cx. pipiens pallens), Aedes(Ae. dorsalis, Ae. flavidorsalis, Ae. flavescens), and Anopheles (An. messeae). Among all the mosqutioes specimens,3 out of 150 captured An. messeae were found to carry ectoparasitic mites, with number of 2,4,27 mites separately. Morphological and molecular identification reached the same result as water mites(Hydrachnidiae, Hydracrina). COI gene sequence showed 94% similarity with the closest species Arrenurus truncatellus. Conlusions Literature review suggests water mites are host-specific parasitism of mosquito species and herein with the first record of Arrenurus sp. parasiting on An. Messeae in the most high-latitude region globally.

OBJECTIVE: To explore the accuracy of human-computer interaction software in identifying and locating type C1 distal radius fractures. METHODS: Based on relevant inclusion and exclusion criteria, 14 cases of type C1 distal radius fractures between September 2023 and March 2024 were retrospectively analyzed, comprising 3 males and 11 females(aged from 27 to 82 years). The data were assigned randomized identifiers. A senior orthopedic physician reviewed the films and measured the ulnar deviation angle, radial height, palmar inclination angle, intra-articular step, and intra-articular gap for each case on the hospital's imaging system. Based on the reduction standard for distal radius fractures, cases were divided into reduction group and non-reduction group. Then, the data were sequentially imported into a human-computer interaction intelligent software, where a junior orthopedic physician analyzed the same radiological parameters, categorized cases, and measured fracture details. The categorization results from the software were consistent with manual classifications (6 reduction cases and 8 non-reduction cases). For non-reduction cases, the software performed further analyses, including bone segmentation and fracture recognition, generating 8 diagnostic reports containing fracture recognition information. For the 6 reduction cases, the senior and junior orthopedic physicians independently analyzed the data on the hospital's imaging system and the AI software, respectively. Bone segments requiring reduction were identified, verified by two senior physicians, and measured for displacement and rotation along the X (inward and outward), Z (front and back), and Y (up and down) axes. The AI software generated comprehensive diagnostic reports for these cases, which included all measurements and fracture recognition details. RESULTS: Both the manual and AI software methods consistently categorized the 14 cases into 6 reduction and 8 non-reduction groups, with identical data distributions. A paired sample t-test revealed no statistically significant differences (P>0.05) between the manual and software-based measurements for ulnar deviation angle, radial ulnar bone height, palmar inclination angle, intra-articular step, and joint space. In fracture recognition, the AI software correctly identified 10 C-type fractures and 4 B-type fractures. For the 6 reduction cases, a total of 24 bone fragments were analyzed across both methods. After verification, it was found that the bone fragments identified by the two methods were consistent. A paired sample t-tests revealed that the identified bone fragments and measured displacement and rotation angles along the X, Y, and Z axes were consistent between the two methods. No statistically significant differences(P>0.05) were found between manual and software measurements for these parameters. CONCLUSION Human-computer interaction software employing AI technology demonstrated comparable accuracy to manual measurement in identifying and locating type C1 distal radius fractures on CT imaging.
Humans ; Male ; Female ; Radius Fractures/surgery* ; Middle Aged ; Adult ; Aged ; Aged, 80 and over ; Tomography, X-Ray Computed/methods* ; Retrospective Studies ; Software ; Wrist Fractures

Nonobstructive azoospermia (NOA), one of the most severe types of male infertility, etiology often remains unclear in most cases. Therefore, this study aimed to detect four biallelic detrimental variants (0.5%) in the minichromosome maintenance domain containing 2 ( MCMDC2 ) genes in 768 NOA patients by whole-exome sequencing (WES). Hematoxylin and eosin (H&E) demonstrated that MCMDC2 deleterious variants caused meiotic arrest in three patients (c.1360G>T, c.1956G>T, and c.685C>T) and hypospermatogenesis in one patient (c.94G>T), as further confirmed through immunofluorescence (IF) staining. The single-cell RNA sequencing data indicated that MCMDC2 was substantially expressed during spermatogenesis. The variants were confirmed as deleterious and responsible for patient infertility through bioinformatics and in vitro experimental analyses. The results revealed four MCMDC2 variants related to NOA, which contributes to the current perception of the function of MCMDC2 in male fertility and presents new perspectives on the genetic etiology of NOA.
Humans ; Male ; Azoospermia/genetics* ; Meiosis/genetics* ; Spermatogenesis/genetics* ; Adult ; Exome Sequencing ; Microtubule-Associated Proteins/genetics* ; Alleles ; Infertility, Male/genetics*

Poly(lactic-co-glycolide)(PLGA)is a key excipient in long-acting sustained-release preparations,and its degradation properties directly affect the drug release behavior.In this study,PLGA microspheres were prepared by microfluidic techniques,and the morphology changes of the microspheres were observed by scanning electron microscopy(SEM).In alkaline environment,due to the accelerated hydrolysis of ester bonds,the surface of the microspheres was rapidly dissolved and eroded,and the degradation rate was significantly higher than that in acidic environment.High temperature accelerated the degradation of PLGA microspheres.Under neutral and alkaline conditions,the microspheres showed aggregation and adhesion.Under acidic conditions,the microspheres gradually decomposed into irregular fragments.The high ionic strength further promoted the surface corrosion of the microspheres,especially under extreme pH conditions.Simultaneously,PLGA microspheres encapsulating coumarin were prepared to simulate the microsphere formulation.The release rate of coumarin after degradation of the microspheres under different conditions was observed by measuring the absorbance with ultraviolet-visible spectrophotometry.The results were consistent with those of the blank microspheres.This study revealed that the degradation of PLGA microspheres was significantly pH-dependent,temperature sensitive and ion strength responsive.These findings not only helped to understand and optimize the long-term stability and controlled release performance of drug-carrying microspheres,but also provided a theoretical basis for further improvement of PLGA-based drug carrier design.

The differences in chemical quality characteristics between Xinjiang Rehmannia glutinosa and R. glutinosa were analyzed to provide a theoretical basis for the introduction and quality control of R. glutinosa. In this study, the high performance liquid chromatography(HPLC) fingerprints of 6 batches of Xinjiang R. glutinosa and 10 batches of R. glutinosa samples were established. The content of iridoid glycosides, phenylethanoid glycosides, monosaccharides, oligosaccharides, and polysaccharides in Xinjiang R. glutinosa and R. glutinosa was determined by high performance liquid chromatography-diode array detection(HPLC-DAD), high performance liquid chromatography-evaporative light scattering detection(HPLC-ELSD), and ultraviolet-visible spectroscopy(UV-Vis). The determination results were analyzed with by chemical pattern recognition and entropy weight TOPSIS method. The results showed that there were 19 common peaks in the HPLC fingerprints of the 16 batches of R. glutinosa, and catalpol, aucubin, rehmannioside D, rehmannioside A, hydroxytyrosol, leonuride, salidroside, cistanoside A, and verbascoside were identified. Hierarchical cluster analysis(HCA) and principal component analysis(PCA) showed that Qinyang R. glutinosa, Mengzhou R. glutinosa, and Xinjiang R. glutinosa were grouped into three different categories, and eight common components causing the chemical quality difference between Xinjiang R. glutinosa and R. glutinosa in Mengzhou and Qinyang of Henan province were screened out by orthogonal partial least squares discriminant analysis(OPLS-DA). The results of content determination showed that there were glucose, sucrose, raffinose, stachyose, polysaccharides, and nine glycosides in Xinjiang R. glutinosa and R. glutinosa samples, and the content of catalpol, rehmannioside A, leonuride, cistanoside A, verbascoside, sucrose, and glucose was significantly different between Xinjiang R. glutinosa and R. glutinosa. The analysis with entropy weight TOPSIS method showed that the comprehensive quality of R. glutinosa in Mengzhou and Qinyang of Henan province was better than that of Xinjiang R. glutinosa. In conclusion, the types of main chemical components of R. glutinosa and Xinjiang R. glutinosa were the same, but their content was different. The chemical quality of R. glutinosa was better than Xinjiang R. glutinosa, and other components in R. glutinosa from two producing areas and their effects need further study.
Rehmannia/classification* ; Drugs, Chinese Herbal/chemistry* ; Chromatography, High Pressure Liquid/methods* ; Quality Control

Objective: Negative symptoms in schizophrenia indicate a poor prognosis. However, the mechanisms underlying the development of negative symptoms remain unclear. This study investigated the relationship between negative symptoms in schizophrenia and frontal alpha asymmetry (FAA). Methods: The study used a 32-channel electroencephalography to acquire alpha power in 4 target-paired sites in each patient. Regional alpha asymmetry was calculated based on the alpha power using EEGLAB Frontal Alpha Asymmetry Toolbox. Results: Sixty schizophrenia patients with predominant negative symptoms (PNS), 72 stabilized schizophrenia (SS) patients, and 73 healthy control (HC) participants were enrolled in this study. No significant differences were observed in FAA between the PNS and SS groups, although both groups exhibited reduced P3-P4 alpha asymmetry compared to HCs. A positive correlation was found between F7-F8 alpha asymmetry and illness duration. Additionally, a predictive model based on P3-P4 alpha asymmetry scores was able to differentiate schizophrenia patients from HCs, achieving a sensitivity of 71.2% and a specificity of 72.6%. Conclusion This study highlighted that parietal alpha asymmetry could serve as a valuable diagnostic tool for schizophrenia.