Colorectal cancer （CRC） is one of the most common cancers， with its incidence ranking high among cancers. It stands as the second leading cause of cancer-related death worldwide. In the early stages， CRC lacks specific symptoms， and most patients are diagnosed at advanced stages， making it a major research focus in the field of gastrointestinal tumors. Currently， clinical CRC treatments face several common challenges， including high surgical risks， frequent metastasis and recurrence， drug resistance， and significant side effects from chemotherapy and radiation therapy. With the development and application of traditional Chinese medicine （TCM）， it has been found that TCM and its active ingredients can effectively inhibit CRC cell proliferation， invasion， migration， and angiogenesis， and promote apoptosis and autophagy， thereby slowing the progression of CRC. This has become a key focus of CRC treatment research. Salvia Miltiorrhiza has multiple pharmacological effects， including activating blood circulation to dispel blood stasis， unlocking meridians to relieve pain， clearing heat to calm irritability， and cooling blood to reduce abscesses. It contains a variety of chemical components， including diterpenoids， phenolic acids， flavonoids， polysaccharides， nitrogen-containing compounds， steroids， and lactone compounds. This review summarized the molecular mechanisms of Salvia miltiorrhiza and its active ingredients in the treatment of CRC. It is found that these ingredients exert anti-CRC effects through various molecular mechanisms， including cell cycle arrest， promotion of apoptosis， inhibition of cell invasion and migration， induction of autophagy， suppression of tumor angiogenesis， and remodeling of the tumor microenvironment. The review aims to provide new insights for the drug development and clinical application of Salvia miltiorrhiza in CRC treatment.

OBJECTIVE To investigate the effects of jaceosidin on osteoarthritis （OA） of rats by regulating adenosine monophosphate-activated protein kinase （AMPK）/NOD-like receptor protein 3 （NLRP3） pathway. METHODS Rats were randomly separated into OA group， jaceosidin group （33.33 mg/kg）， AMPK inhibitor （Compound C， 20 mg/kg） group， jaceosidin （33.33 mg/kg）+Compound C （20 mg/kg） group， and sham operation group， with 12 rats in each group. Except for the sham operation group， the OA model was induced with modified Hulth method in all other groups. After successful modeling， they were given a relevant dose of jaceosidin or normal saline intragastrically， and Compound C or normal saline intraperitoneally， once a day， for consecutive 8 weeks. Twenty-four h after the last medication， the degree of knee joint swelling in rats from each group was measured. The pathological changes of the articular cartilage tissue in the knee joints， and the Mankin score were assessed. The levels of tumor necrosis factor-α （TNF-α）， interleukin-18 （IL-18）， and IL-6， as well as the protein expressions of collagen Ⅱ， aggrecan （ACAN）， and a disintegrin and metalloproteinase with thrombospondin 5 （ADAMTS5）， phosphorylated AMPK （p-AMPK）， AMPK， NLRP3， cleaved-caspase-1， and cleaved-IL-1β were detected in the articular cartilage tissue of rats’ knees. RESULTS Compared with OA group， the cartilage tissue defect of jaceosidin group was relieved， the cartilage matrix staining was deepened， and the number of chondrocytes was increased. Knee swelling， Mankin score， the levels of TNF- α， IL-18 and IL-6， and protein expressions of ADAMTS5， NLRP3， cleaved-caspase-1 and cleaved-IL-1β in knee cartilage were significantly decreased or down-regulated. Protein expressions of collagen Ⅱ， ACAN and phosphorylation level of AMPK were significantly increased or up-regulated （P＜0.05）. Compound C significantly reversed the improvement effects of jaceosidin on the above indexes of OA rats （P＜0.05）. CONCLUSIONS Jaceosidin may inhibit inflammation and extracellular matrix degradation in OA rats by regulating the AMPK/NLRP3 signaling pathway.

Objective: To explore the effect of YTH domain family protein 1(YTHDF1) on the activation, proliferation and migration of hepatic stellate cells(HSCs) by regulating mitochondrial fission mediated by mitochondrial fission protein 1(Fis1). Methods: The mouse hepatic stellate cell line JS-1 was treated with 5 ng/ml TGF-β1 for 24 h to induce its activation and proliferation, andYTHDF1-siRNA was used to construct aYTHDF1silencing model.The experiment was divided into Control group, TGF-β1 group, TGF-β1+si-NC group and TGF-β1+si-YTHDF1 group.Expression changes ofYTHDF1,Fis1and key indicators of fibrosis, type Ⅰ collagen(CollagenⅠ) and α-smooth muscle actin(α-SMA) were detected through reverse transcription quantitative polymerase chain reaction(RT-qPCR) and Western blot; CCK-8 was used to detect cell proliferation ability; Transwell migration assay and cell scratch assay were used to detect cell migration ability; immunofluorescence staining experiment was used to detect the effect ofYTHDF1onFis1-mediated mitochondrial fission; finally, JC-1 staining was used to experimentally detect the effect ofYTHDF1on mitochondrial membrane potential. Results: Compared with the Control group, RT-qPCR and Western blot experimental results showed that the expression ofYTHDF1andFis1increased in the TGF-β1 group(P<0.05,P<0.01;P<0.000 1), as well as the fibrosis markersCollagenⅠand the expression level of α-SMA increased(P<0.01;P<0.001,P<0.000 1); while adding CCK-8, the experimental results showed that the proliferation ability of HSCs in the TGF-β1 group was enhanced(P<0.000 1); Transwell experimental results showed that the migration ability of HSCs in the TGF-β1 group was enhanced(P<0.01); the cell scratch experiment results showed that the migration ability of HSCs in the TGF-β1 group was enhanced(P<0.000 1); the immunofluorescence experiment results showed that the TGF-β1 group Mito-Tracker Red staining andFis1co-localization signal increased(P<0.05); JC-1 staining experiment results showed that the mitochondrial membrane potential increased in the TGF-β1 group(P<0.01). Compared with the TGF-β1+si-NC group, RT-qPCR and Western blot experimental results showed that the expression ofYTHDF1andFis1in the TGF-β1+si-YTHDF1 group was reduced(P<0.01;P<0.001), and fibrosis markers the levels ofCollagenⅠandα-SMAwere reduced(P<0.01;P<0.001,P<0.01).CCK-8 experimental results showed that the proliferation ability of HSCs in the TGF-β1+si-YTHDF1 group was weakened(P<0.000 1); Transwell experiment results showed that the migration ability of HSCs in the TGF-β1+si-YTHDF1 group was weakened(P<0.001); cell scratch experiment results showed that the migration ability of HSCs in the TGF-β1+si-YTHDF1 group was weakened(P<0.000 1); immunofluorescence experiment results showed that the Mito-Tracker Red staining andFis1co-localization signal decreased in the TGF-β1+si-YTHDF1 group(P<0.01); JC-1 staining experiment results showed that mitochondrial membrane potential decreased in the TGF-β1+si-YTHDF1 group(P<0.05). Conclusion YTHDF1promotes the activation, proliferation and migration capabilities of HSCs by positively regulatingFis1-mediated mitochondrial fission. This suggests thatYTHDF1may be a key gene involved in regulating the activation, proliferation and migration of HSCs.

Phosgene is a highly reactive chemical substance and a prevalent chemical warfare agent,and it is vitally important for rapid and accurate detection of phosgene to counteract terrorist threats and industrial accidents.In this work,a phosgene probe,designated as SX-Pho,which incorporated benzimidazole and hydroxyl groups as recognition motifs,was prepared through Suzuki coupling and Debus-Radziszewski methodologies to incorporate an electron-donating carbazole moiety.This probe exhibited a large Stokes shift(Approximately 130 nm).Upon exposure to triphosgene/triethylamine conditions(in situ phosgene generation),the fluorescence emission of probe at 470 nm underwent significant quenching,with a 20-fold reduction in intensity,while the fluorescence lifetime decreased from 3.30 ns to 3.06 ns.Concentration titration experiments demonstrated that SX-Pho achieved a lower detection limit of 57.8 nmol/L with high specificity and interference resistance.Preton nuclear magnetic resonance spectroscopy(1H NMR),high-resolution mass spectrometry,and density functional theory(DFT)calculations confirmed the cyclization reaction between hydroxyl groups,imines,and phosgene.The extent of overlap between the highest occupied molecular orbital(HOMO)and the lowest unoccupied molecular orbital(LUMO)was notably decreased,leading to the suppression of radiative transitions.The energy gap underwent a reduction of 0.43 eV,while the non-radiative transition was augmented,resulting in fluorescence quenching and achieving rapid detection of phosgene.Based on this,probe-loaded test strips were prepared.The color change under 365 nm illumination allowed visual discrimination of phosgene at concentrations below 20 μL/L.Furthermore,using a smartphone's built-in RGB application to measure the intensity of the blue(B)channel after the test strips were exposed to phosgene enabled both qualitative and quantitative detection.The detection range was 1.82-50 μL/L,with a limit of detection(LOD)of 1.814 μL/L.

ObjectiveTo explore the effects of the Tai Chi training on bone density， bone turnover markers， and heart rate variability for people with high-risk osteoporosis， and to provide evidence for the prevention of osteoporosis at early stage. MethodsSixty-six cases of people with high risk of osteoporosis were included， and they were divided into 33 cases each in the intervention group and the control group using the random number table method. The control group received osteoporosis health education three times a week， and the intervention group received Tai Chi training under the guidance of a trainer three times a week for 40 mins each time on the basis of the control group， and both groups were intervened for 12 weeks. Dual-energy X-ray absorptiometry was used to measure the bone density of L₁~L₄ vertebrae， bilateral femoral necks and bilateral total hips in the two groups before and after the intervention； enzyme-linked immunosorbent assay was used to determine bone turnover markers before and after the intervention， including pro-collagen type Ⅰ pro-amino-terminal prepropyl peptide （P1NP） and β-collagen type Ⅰ cross-linking carboxy-terminal peptide （β-CTX）. Seven cases with good compliance in the intervention group were selected. After wearing the heart rate sensor， they successively performed Tai Chi training and walking activities recommended by the guideline for 20 mins each， and the heart rate variability （HRV） during exercise was collected， including time-domain indexes such as standard deviation of normal sinus intervals （SDNN）， root-mean-square of the difference between adjacent RR intervals （RMSSD）， frequency-domain metrics such as low-frequency power （LF）， high-frequency power （HF）， and low-frequency/high-frequency power ratio （LF/HF）， as well as nonlinear metrics such as approximate entropy （ApEn）， sample entropy （SampEn）. ResultsFinally， 63 cases were included in the outcome analysis， including 30 cases in the intervention group and 33 cases in the control group. After the intervention， the differences of L₁~L₄ vertebrae， bone density of bilateral femoral neck and bilateral total hip in the intervention group were not statistically significant when compared with those before intervention （P＞0.05）， while the bone density of all parts of the control group decreased significantly compared with that before intervention （P＜0.05）， and the difference in the bone density of the L₁~L₄ vertebrae， bilateral femoral neck， and the right total hip before and after the intervention of the intervention group was smaller than that of the control group （P＜0.05）. The differences in P1NP and β-CTX between groups before and after intervention was not statistically significant （P＞0.05）. Compared with walking exercise， LF decreased， HF increased and LF/HF decreased during Tai Chi exercise （P＜0.05）； the time domain indexes and non-linear indexes between groups had no statistically significant difference （P＞0.05）. ConclusionTai Chi exercise can maintain lumbar， hip， and femoral bone density and improve sympathetic/parasympathetic balance in people at high risk for osteoporosis， but cannot significantly improve bone turnover markers.

Objective To analyze the epidemiology and trends of measles,tuberculosis,pertussis,scarlet fever,influenza,mumps and rubella in Beijing between 2014 and 2023 in order to provide data for prevention and control of related diseases.Methods Data on the incidences of seven respiratory infectious diseases in Beijing between 2014 and 2023 was collected.Descriptive epidemiological methods were employed to analyze their demographic,temporal and spatial distribution.Joinpoint regression analysis was used to assess temporal trends in incidence.Results A total of 1 406 777 cases of seven respiratory infectious diseases were reported in Beijing between 2014 and 2023,which corresponded to an average crude rate of 649.76/100 000 reported annually.The crude rate of incidencewas higher among females than among males,with the most vulnerable age groups being 0-4 years and 5-19 years,and was higher in the six districts than on the outskirts.Most of the respiratory infectious diseases peaked in winter and spring.The annual increase in the incidence of respiratory infectious diseases in Beijing in this period averaged 27.27％,with no statistically significant differences in trends.The incidence rates of measles,tuberculosis,scarlet fever,mumps and rubella decreased significantly while those of pertussis and influenza increased,but with no statistically significant difference.Conclusion The overall incidence of major respiratory infectious diseases in Beijing is increasing.It is recommended that more people get vaccinated,surveillance of such diseases as pertussis and influenza be enhanced,and regional health resources be allocated more effectively,all of which will be critical to subsequent prevention and control of respiratory infectious diseases in Beijing.

OBJECTIVE: To investigate the effects of removing microglia from spinal cord on nerve repair and functional recovery after spinal cord injury (SCI) in mice. METHODS: Thirty-nine 6-week-old female C57BL/6 mice were randomly divided into control group ( n=12), SCI group ( n=12), and PLX3397+SCI group ( n=15). The PLX3397+SCI group received continuous feeding of PLX3397, a colony-stimulating factor 1 receptor inhibitor, while the other two groups were fed a standard diet. After 14 days, both the SCI group and the PLX3397+SCI group were tested for ionized calcium binding adapter molecule 1 (Iba1) to confirm that the PLX3397+SCI group had completely depleted the spinal cord microglia. The SCI model was then prepared by clamping the spinal cord in both the SCI group and the PLX3397+SCI group, while the control group underwent laminectomy. Preoperatively and at 1, 3, 7, 14, 21, and 28 days postoperatively, the Basso Mouse Scale (BMS) was used to assess the hind limb function of mice in each group. At 28 days, a footprint test was conducted to observe the gait of the mice. After SCI, spinal cord tissue from the injury site was taken, and Iba1 immunofluorescence staining was performed at 7 days to observe the aggregation and proliferation of microglia in the spinal cord. HE staining was used to observe the formation of glial scars at the injury site at 28 days; glial fibrillary acidic protein (GFAP) immunofluorescence staining was applied to astrocytes to assess the extent of the injured area; neuronal nuclei antigen (NeuN) immunofluorescence staining was used to evaluate neuronal survival. And 5-hydroxytryptamine (5-HT) immunofluorescence staining was performed to assess axonal survival at 60 days. RESULTS: All mice survived until the end of the experiment. Immunofluorescence staining revealed that the microglia in the spinal cord of the PLX3397+SCI group decreased by more than 95% compared to the control group after 14 days of continuous feeding with PLX3397 ( P<0.05). Compared to the control group, the BMS scores in the PLX3397+SCI group and the SCI group significantly decreased at different time points after SCI ( P<0.05). Moreover, the PLX3397+SCI group showed a further decrease in BMS scores compared to the SCI group, and exhibited a dragging gait. The differences between the two groups were significant at 14, 21, and 28 days ( P<0.05). HE staining at 28 days revealed that the SCI group had formed a well-defined and dense gliotic scar, while the PLX3397+SCI group also developed a gliotic scar, but with a more blurred and loose boundary. Immunofluorescence staining revealed that the number of microglia near the injury center at 7 days increased in the SCI group than in the control group, but the difference between groups was not significant ( P>0.05). In contrast, the PLX3397+SCI group showed a significant reduction in microglia compared to both the control and SCI groups ( P<0.05). At 28 days after SCI, the area of spinal cord injury in the PLX3397+SCI group was significantly larger than that in SCI group ( P<0.05); the surviving neurons significantly reduced compared with the control group and SCI group ( P<0.05). The axonal necrosis and retraction at 60 days after SCI were more obvious. CONCLUSION The removal of microglia in the spinal cord aggravate the tissue damage after SCI and affecte the recovery of motor function in mice, suggesting that microglia played a neuroprotective role in SCI.
Animals ; Spinal Cord Injuries/surgery* ; Microglia/pathology* ; Female ; Mice ; Mice, Inbred C57BL ; Nerve Regeneration/drug effects* ; Spinal Cord/pathology* ; Pyrroles/administration & dosage* ; Aminopyridines/administration & dosage* ; Recovery of Function ; Disease Models, Animal ; Calcium-Binding Proteins/metabolism* ; Receptors, Granulocyte-Macrophage Colony-Stimulating Factor/antagonists & inhibitors* ; Microfilament Proteins/metabolism* ; Glial Fibrillary Acidic Protein/metabolism*

OBJECTIVE: To explore the accuracy of human-computer interaction software in identifying and locating type C1 distal radius fractures. METHODS: Based on relevant inclusion and exclusion criteria, 14 cases of type C1 distal radius fractures between September 2023 and March 2024 were retrospectively analyzed, comprising 3 males and 11 females(aged from 27 to 82 years). The data were assigned randomized identifiers. A senior orthopedic physician reviewed the films and measured the ulnar deviation angle, radial height, palmar inclination angle, intra-articular step, and intra-articular gap for each case on the hospital's imaging system. Based on the reduction standard for distal radius fractures, cases were divided into reduction group and non-reduction group. Then, the data were sequentially imported into a human-computer interaction intelligent software, where a junior orthopedic physician analyzed the same radiological parameters, categorized cases, and measured fracture details. The categorization results from the software were consistent with manual classifications (6 reduction cases and 8 non-reduction cases). For non-reduction cases, the software performed further analyses, including bone segmentation and fracture recognition, generating 8 diagnostic reports containing fracture recognition information. For the 6 reduction cases, the senior and junior orthopedic physicians independently analyzed the data on the hospital's imaging system and the AI software, respectively. Bone segments requiring reduction were identified, verified by two senior physicians, and measured for displacement and rotation along the X (inward and outward), Z (front and back), and Y (up and down) axes. The AI software generated comprehensive diagnostic reports for these cases, which included all measurements and fracture recognition details. RESULTS: Both the manual and AI software methods consistently categorized the 14 cases into 6 reduction and 8 non-reduction groups, with identical data distributions. A paired sample t-test revealed no statistically significant differences (P>0.05) between the manual and software-based measurements for ulnar deviation angle, radial ulnar bone height, palmar inclination angle, intra-articular step, and joint space. In fracture recognition, the AI software correctly identified 10 C-type fractures and 4 B-type fractures. For the 6 reduction cases, a total of 24 bone fragments were analyzed across both methods. After verification, it was found that the bone fragments identified by the two methods were consistent. A paired sample t-tests revealed that the identified bone fragments and measured displacement and rotation angles along the X, Y, and Z axes were consistent between the two methods. No statistically significant differences(P>0.05) were found between manual and software measurements for these parameters. CONCLUSION Human-computer interaction software employing AI technology demonstrated comparable accuracy to manual measurement in identifying and locating type C1 distal radius fractures on CT imaging.
Humans ; Male ; Female ; Radius Fractures/surgery* ; Middle Aged ; Adult ; Aged ; Aged, 80 and over ; Tomography, X-Ray Computed/methods* ; Retrospective Studies ; Software ; Wrist Fractures

OBJECTIVE: To explore the application value and clinical effect of 3D printing combined with customized bone plate in the treatment of acetabular fracture. METHODS: From June 2020 to June 2022, 11 patients with acetabular fractures underwent preoperative planning using 3D printing technology and were treated with customized bone plates including 8 males and 3 females, aged 25 to 66 years old. The fractures were classified according to Letournel-Judet:4 posterior wall fractures, 2 T-type fractures, 2 transverse posterior wall fractures, 2 double column fractures, and 1 anterior column with posterior semi-transverse fractures. The operative time, intraoperative blood loss, intraoperative fluoroscopy times, postoperative drainage volume, postoperative fracture healing time, and hip function score were recorded and analyzed. RESULTS: The operation time of 11 patients was 80 to 150 min, intraoperative blood volume was 150 to 700 ml, fluoroscopy frequency was 2 to 6, postoperative drainage flow was 60 to 195 ml, and the fracture healing time was 2.5 to 6.0 months. Fracture reduction was evaluated according to Matta score:anatomical reduction in 3 cases and satisfactory reduction in 8 cases. Eleven patients were followed up for 7 to 18 months. The hip Merle d'Aubigne function scores were excellent in 6 cases, good in 3 cases, fair in 1 case and poor in 1 case. Incision fat liquefaction occurred in 1 case and obturator nerve traction in 1 case. CONCLUSION The application of 3D printing technology combined with customized bone plates in the treatment of acetabular fracture is effective. In addition, the printed model can provide the operator with the results of the three-dimensional shape of the fracture, which is convenient for surgical reduction and effectively improves the efficiency of surgery.
Humans ; Female ; Male ; Middle Aged ; Acetabulum/surgery* ; Printing, Three-Dimensional ; Adult ; Aged ; Bone Plates ; Fractures, Bone/surgery* ; Fracture Fixation, Internal/methods*