Objective To explore the feasibility and reference value of allogeneic lung transplantation and postoperative monitoring in miniature pigs for lung transplantation research. Methods Two miniature pigs (R1 and R2) underwent left lung allogeneic transplantation. Complement-dependent cytotoxicity tests and blood cross-matching were performed before surgery. The main operative times and partial pressure of arterial oxygen (PaO₂) after opening the pulmonary artery were recorded during surgery. Postoperatively, routine blood tests, biochemical blood indicators and inflammatory factors were detected, and pathological examinations of multiple organs were conducted. Results The complement-dependent cytotoxicity test showed that the survival rate of lymphocytes between donors and recipients was 42.5%-47.3%, and no agglutination reaction occurred in the cross-matching. The first warm ischemia times of D1 and D2 were 17 min and 10 min, respectively, and the cold ischemia times were 246 min and 216 min, respectively. Ultimately, R1 and R2 survived for 1.5 h and 104 h, respectively. Postoperatively, in R1, albumin (ALB) and globulin (GLB) decreased, and alanine aminotransferase increased; in R2, ALB, GLB and aspartate aminotransferase all increased. Urea nitrogen and serum creatinine increased in both recipients. Pathological results showed that in R1, the transplanted lung had partial consolidation with inflammatory cell infiltration, and multiple organs were congested and damaged. In R2, the transplanted lung had severe necrosis with fibrosis, and multiple organs had mild to moderate damage. The expression levels of interleukin-1β and interleukin-6 increased in the transplanted lungs. Conclusions The allogeneic lung transplantation model in miniature pigs may systematically evaluate immunological compatibility, intraoperative function and postoperative organ damage. The data obtained may provide technical references for subsequent lung transplantation research.

To introduce the general thinking, guidelines, work objectives and elaboration process of the general technical requirements adopted by volume Ⅳ of the Chinese Pharmacopoeia 2025 Edition, and to summarize and figure out the main characteristics on dosage forms, physico-chemical testing, microbial and biological testing, reference standards and guidelines The newly revised general chapters of pharmacopoeia give full play to the normative and guiding role of the Chinese Pharmacopoeia standard, track the frontier dynamics of international drug regulatory science and the elaboration of monographs, expand the application of state-of-the-art technologies, and steadily promote the harmonization and unification with the ICH guidelines； further enhance the overall capacity of TCM quality control, actively implement the 3 R principles on animal experiments, and practice the concept of environmental-friendly； replace and/or reduce the use of toxic and hazardous reagents, strengthen the requirements of drug safety control This paper aims to provide a full-view perspective for the comprehensive, correct understanding and accurate implementation of general technical requirements included in the Chinese Pharmacopoeia 2025 Edition.

BACKGROUND:The use of 3D-printed patient-specific instruments in opening wedge high tibial osteotomy has advantages such as shorter operative time,fewer fluoroscopic exposures,and higher correction accuracy.However,previous studies have reported issues such as significant damage to surrounding soft tissues and improper fixation of the plates. OBJECTIVE:To investigate the clinical efficacy of using 3D-printed patient-specific instruments combined with customized locking plate in opening wedge high tibial osteotomy for the treatment of knee osteoarthritis. METHODS:A total of 20 patients diagnosed with knee osteoarthritis were divided into the 3D group(n=10)and the conventional group(n=10)according to surgical methods.The 3D group underwent opening wedge high tibial osteotomy using 3D-printed patient-specific instruments combined with customized locking plate,while the conventional group underwent opening wedge high tibial osteotomy using conventional methods.The operative time,fluoroscopic exposures,incision length,pre-and postoperative hip-knee-ankle angle,medial proximal tibial angle,posterior tibial slope,the difference between the planned and actual correction angle,preoperative and 1,3,6 months postoperative knee range of motion and Lysholm score,and incidence of complications were analyzed and compared between the two groups. RESULTS AND CONCLUSION:(1)The operative time and fluoroscopic exposures were significantly shorter in the 3D group compared to the conventional group,with a statistically significant difference(P<0.001).(2)Both groups showed a significant improvement in postoperative hip-knee-ankle angle and medial proximal tibial angle compared to preoperative values,with a statistically significant difference(P<0.001),while there was no significant change in posterior tibial slope.In the 3D group,the postoperative hip-knee-ankle angle,medial proximal tibial angle,and posterior tibial slope differed from their respective preoperative planned values by(-0.22±0.72)°,(-0.20±0.73)°,and(0.23±0.37)°,but the differences were not statistically significant.The difference between the planned and actual correction angle of 3D group was significantly smaller than that of conventional group(P<0.05).(3)Both groups showed a gradual increase in knee range of motion and Lysholm scores after surgery(P<0.001).Compared to the conventional group,the 3D group had superior knee range of motion at 1 and 3 months postoperatively,as well as a higher Lysholm score at 1 month postoperatively,with statistically significant differences(P<0.05).There were no statistically significant differences in Lysholm score at 3 months and knee range of motion and Lysholm score at 6 months between the two groups(P>0.05).(4)Complications occurred in neither groups.(5)The above results indicate that both 3D-printed patient-specific instruments combined with customized locking plate and conventional methods have good clinical efficacy.However,the former has a shorter operative time,fewer fluoroscopic exposures,and faster postoperative recovery of knee joint function.Additionally,3D-printed patient-specific instruments can achieve preoperative planning accurately.

T7 RNA polymerase (T7 RNAP) is one of the simplest known RNA polymerases. Its unique structural features make it a critical model for studying the mechanisms of RNA synthesis. This review systematically examines the static crystal structure of T7 RNAP, beginning with an in-depth examination of its characteristic “thumb”, “palm”, and “finger” domains, which form the classic “right-hand-like” architecture. By detailing these structural elements, this review establishes a foundation for understanding the overall organization of T7 RNAP. This review systematically maps the functional roles of secondary structural elements and their subdomains in transcriptional catalysis, progressively elucidating the fundamental relationships between structure and function. Further, the intrinsic flexibility of T7 RNAP and its applications in research are also discussed. Additionally, the review presents the structural diagrams of the enzyme at different stages of the transcription process, and through these diagrams, it provides a detailed description of the complete transcription process of T7 RNAP. By integrating structural dynamics and kinetics analyses, the review constructs a comprehensive framework that bridges static structure to dynamic processes. Despite its advantages, T7 RNAP has a notable limitation: it generates double-stranded RNA (dsRNA) as a byproduct. The presence of dsRNA not only compromises the purity of mRNA products but also elicits nonspecific immune responses, which pose significant challenges for biotechnological and therapeutic applications. The review provides a detailed exploration of the mechanisms underlying dsRNA formation during T7 RNAP catalysis, reviews current strategies to mitigate this issue, and highlights recent progress in the field. A key focus is the semi-rational design of T7 RNAP mutants engineered to minimize dsRNA generation and enhance catalytic performance. Beyond its role in transcription, T7 RNAP exhibits rapid development and extensive application in fields, including gene editing, biosensing, and mRNA vaccines. This review systematically examines the structure-function relationships of T7 RNAP, elucidates the mechanisms of dsRNA formation, and discusses engineering strategies to optimize its performance. It further explores the engineering optimization and functional expansion of T7 RNAP. Furthermore, this review also addresses the pressing issues that currently need resolution, discusses the major challenges in the practical application of T7 RNAP, and provides an outlook on potential future research directions. In summary, this review provides a comprehensive analysis of T7 RNAP, ranging from its structural architecture to cutting-edge applications. We systematically examine: (1) the characteristic right-hand domains (thumb, palm, fingers) that define its minimalistic structure; (2) the structure-function relationships underlying transcriptional catalysis; and (3) the dynamic transitions during the complete transcription cycle. While highlighting T7 RNAP’s versatility in gene editing, biosensing, and mRNA vaccine production, we critically address its major limitation—dsRNA byproduct formation—and evaluate engineering solutions including semi-rationally designed mutants. By synthesizing current knowledge and identifying key challenges, this work aims to provide novel insights for the development and application of T7 RNAP and to foster further thought and progress in related fields.

Lung transplantation is the ultimate therapeutic option for end-stage pulmonary diseases such as interstitial pneumonia, chronic obstructive pulmonary disease and pneumoconiosis. Currently, the shortage of allogeneic lung donors significantly limits the opportunity for end-stage lung disease patients to receive lung transplantation. In recent years, with the rapid development of biomedical engineering technologies, especially the major breakthroughs in genetic modification and cloning, xenogeneic lung transplantation has shown important potential for clinical translation. Among them, genetically modified pigs have become the most promising xenogeneic lung source due to the close similarity of organ size and physiological characteristics to humans, and the ability to perform targeted gene knockouts (such as α-Gal antigen knockout) to reduce the occurrence of hyperacute rejection. This article focuses on the research progress of porcine xenogeneic lung transplantation, systematically reviews the latest achievements and challenges in animal experiments and human trials, and introduces the technical experience accumulated by Shenzhen Third People's Hospital in the porcine-to-monkey xenogeneic lung transplantation model, in the hope of providing practical references for future research in this field.

This article systematically reviews the characteristics and trends of the writing, editing, publication and promotion of physiology textbooks in China from the late 19th century to the present, focusing on the introduction, development and innovation of Chinese physiology textbooks. The development of physiology textbooks in China is divided into four main stages: the introduction and initial development of physiology textbooks from the late 19th century to 1925; the localization and diversification of textbooks from 1926 to 1949, after the establishment of the Chinese Physiological Society; the exploratory phase of textbook construction after the founding of the People's Republic of China from 1949 to 1976; the formation and innovation of the textbook development process from 1977 to the present, following the restoration of the college entrance examination. For each phase, the article not only records the historical development of physiology textbooks, but also analyzes the evolution of their content, writing styles and the interaction with the social and political contexts. The article summarizes the characteristics and experiences of all these four phases. Special attention is given to the comprehensive statistical analysis of physiology textbooks published since the restoration of the college entrance examination and Economic Reform and Opening-up in 1977, revealing the changes in the number, publication trends and academic features of textbooks during this period. Finally, the article presets the future development of physiology textbooks in China, proposing that textbook writing should integrate aspects such as ideological and political education, medical humanities, basic and clinical medicine, health education, scientific research and international exchange and collaboration. The article also advocates for the application of new technologies and methods, such as artificial intelligence, virtual teaching models and knowledge graphs, to support "personalized learning". This research provides a systematic reference for the study of the history of medical education and offers theoretical support for the future innovation of physiology textbook in China.
Humans ; China ; History, 19th Century ; History, 20th Century ; History, 21st Century ; Physiology/education* ; Textbooks as Topic/history*

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

The relationship between hyperuricemia (HUA) and erectile dysfunction (ED) remains inadequately understood. Given that HUA is often associated with various metabolic disorders, this study aims to explore the multivariate linear impacts of metabolic parameters on erectile function in ED patients with HUA. A cross-sectional analysis was conducted involving 514 ED patients with HUA in the Department of Andrology, Jiangsu Province Hospital of Chinese Medicine (Nanjing, China), aged 18 to 60 years. General demographic information, medical history, and laboratory results were collected to assess metabolic disturbances. Sexual function was evaluated using the 5-item version of the International Index of Erectile Function (IIEF-5) questionnaire. Based on univariate analysis, variables associated with IIEF-5 scores were identified, and the correlations between them were evaluated. The effects of these variables on IIEF-5 scores were further explored by multiple linear regression models. Fasting plasma glucose ( β = -0.628, P < 0.001), uric acid ( β = -0.552, P < 0.001), triglycerides ( β = -0.088, P = 0.047), low-density lipoprotein cholesterol ( β = -0.164, P = 0.027), glycated hemoglobin (HbA1c; β = -0.562, P = 0.012), and smoking history ( β = -0.074, P = 0.037) exhibited significant negative impacts on erectile function. The coefficient of determination ( R ²) for the model was 0.239, and the adjusted R ² was 0.230, indicating overall statistical significance ( F -statistic = 26.52, P < 0.001). Metabolic parameters play a crucial role in the development of ED. Maintaining normal metabolic indices may aid in the prevention and improvement of erectile function in ED patients with HUA.
Humans ; Male ; Erectile Dysfunction/metabolism* ; Hyperuricemia/metabolism* ; Adult ; Middle Aged ; Cross-Sectional Studies ; Glycated Hemoglobin/metabolism* ; Blood Glucose/metabolism* ; Uric Acid/blood* ; Young Adult ; Triglycerides/blood* ; Adolescent ; Cholesterol, LDL/blood* ; Penile Erection/physiology* ; Surveys and Questionnaires

OBJECTIVE: To investigate the efficacy and safety of chidamide combined with DICE regimen (cisplatin+ ifosfamide + etoposide + dexamethasone) for relapsed/refractory diffuse large B-cell lymphome(R/R DLBCL). METHODS: The clinical data of 31 R/R DLBCL patients treated by chidamide combined with DICE regimen in the Hematology Department of the Fourth Hospital of Hebei Medical University from October 2016 to October 2020 were retrospectively analyzed. The clinical efficacy and adverse events were observed. RESULTS: Among the 31 patients, 20 were male and 11 were female. The median age of the patients was 55 (range: 27-71) years old, 21 cases were < 60 years old, 10 cases were ≥60 years old. 26 cases were refractory and 5 cases were relapsed. There were 13 cases of germinal center B-cell like (GCB), 17 cases of non-GCB, and 1 case had missing Hans type. There were 17 cases of double-expression lymphoma (DEL) and 14 cases of non-DEL. The complete response rate of patients was 38.7%(12/31), the overall response rate was 67.7%(21/31). The median progression-free survival time and the median overall survival time were 9.8(95%CI : 4.048-15.552) months, 13.9(95%CI : 9.294-18.506) months, respectively. Multipvariate analysis showed that GCB and DEL reduced the risk of disease recurrence in R/R DLBCL patients. The main grade 3/4 hematological adverse events in this study were thrombocytopenia, agranulocytosis, anemia and leukopenia. CONCLUSION The chidamide combined with DICE regimen is effective in the treatment of R/R DLBCL, and hematological adverse events should be closely monitored.
Humans ; Lymphoma, Large B-Cell, Diffuse/drug therapy* ; Middle Aged ; Female ; Male ; Adult ; Aged ; Retrospective Studies ; Antineoplastic Combined Chemotherapy Protocols/therapeutic use* ; Benzamides/administration & dosage* ; Aminopyridines/administration & dosage* ; Etoposide/therapeutic use* ; Cisplatin/administration & dosage* ; Ifosfamide/administration & dosage* ; Dexamethasone/therapeutic use*

OBJECTIVE: To explore the clinical significance of circulating tumor DNA (ctDNA) in response evaluation and relapse monitoring for patients with primary mediastinal large B-cell lymphoma (PMBCL). METHODS: The clinical characteristics, efficacy and survival of 38 PMBCL patients in our hospital from January 2010 to April 2020 were retrospectively analyzed. The ctDNA monitoring was conducted by targeted next-generation sequencing (NGS). RESULTS: Among the 38 patients, 26 cases were female, and 32 cases were diagnosed with Ann Arbor stage I-II. The 5-year overall survival (OS) rate and progression-free survival (PFS) rate were 74.7% and 61.7%, respectively. Males and those with high aaIPI scores (3 points) had a relatively poor prognosis. The NGS results of 23 patients showed that STAT6 (65.2%), SOCS1 (56.5%), and TNFAIP3 (56.5%) were the most common mutated genes. Patients with stable disease (SD)/progressive disease (PD) exhibited enrichment in cell cycle, FoxO, and TNF signaling pathways. A total of 29 patients underwent end-of-treatment PET/CT (EOT PET/CT), and 16 of them received ctDNA monitoring with 12 negative. Among 6 patients with EOT PET/CT positive (Deauville 4), 4 underwent ctDNA monitoring, and 3 of them were negative, being still in continuous remission without any subsequent anti-tumor therapy. CONCLUSION CtDNA may be combined with PET/CT to assess efficacy, monitor relapse, and guide treatment of PMBCL.
Humans ; Circulating Tumor DNA/blood* ; Female ; Mediastinal Neoplasms ; Male ; Retrospective Studies ; High-Throughput Nucleotide Sequencing ; Prognosis ; Lymphoma, Large B-Cell, Diffuse/genetics* ; Middle Aged ; Adult ; Aged ; Neoplasm Recurrence, Local ; Mutation