[Objective] To evaluate the clinical application value of intrauterine perfusion with platelet-rich plasma (PRP) combined with in vitro fertilization-frozen-thawed embryo transfer (IVF-FET) in patients with chronic endometritis (CE). [Methods] A randomized controlled trial (RCT) was conducted, enrolling 60 CE patients undergoing artificial cycle frozen embryo transfer at our hospital from January 2022 to January 2024. Participants were randomly divided into three groups: Group A (routine frozen embryo transfer, n=20), Group B (routine frozen embryo transfer + one PRP intrauterine perfusion, n=20), and Group C (routine frozen embryo transfer + two PRP intrauterine perfusions, n=20). Endometrial thickness during the transformation and transplantation phases, uterine artery pulsatility index (PI), resistance index (RI), systolic peak velocity/end-diastolic velocity (S/D) ratio during transplantation, serum levels of IL-2, IL-4, IL-6, IL-10, and TNF-α during transplantation, as well as biochemical pregnancy rate, clinical pregnancy rate, live birth rate, and early miscarriage rate were compared across groups. [Results] No significant differences in endometrial thickness were observed among the three groups during the transformation phase (P>0.05). During the transplantation phase, endometrial thickness in Groups C and B was significantly higher than in Group A[9.54 (8.96-10.22) and 8.90 (8.34-9.72) vs 8.37 (7.89-8.75) mm, P<0.05], with Group C showing greater thickness than Group B (Z=3.733, P<0.05). Endometrial thickness in Groups C and B during transplantation was significantly increased compared to their respective transformation phases (Z=2.191, 2.462; P<0.05). Groups C and B exhibited lower PI, RI, and S/D values than Group A[PI:1.87 (1.77-1.97), 1.94 (1.88-2.15) vs 2.43 (2.35-2.49); RI:0.75 (0.73-0.77), 0.78 (0.75-0.81) vs 0.84 (0.83-0.86); S/D:2.61 (2.33-3.42), 3.01 (2.20-3.93) vs 3.72 (3.06-4.49); P<0.05]. Group C demonstrated lower PI and RI than Group B (P<0.05). IL-2 levels in Groups C and B were higher than in Group A[3.88 (2.71-5.01), 3.59 (2.73-4.38) vs 3.16 (2.11-3.25) ng/L, P<0.05], while IL-4, IL-6, IL-10, and TNF-α levels were significantly lower (IL-4: Z=1.428, 2.421; IL-6: Z=1.754, 2.435; IL-10: Z=1.754, 2.854; TNF-α: Z=1.961, 1.765; P<0.05). Group C had lower IL-6 levels than Group B (Z=3.976, P<0.05). Biochemical pregnancy rate, clinical pregnancy rate, and live birth rate in Group C were significantly higher than in Group A (75% vs 40%, 70% vs 35%, 60% vs 20%, P<0.05). No significant differences in early miscarriage rates were observed among the groups (χ²=3.750, P>0.05). [Conclusion] Intrauterine autologous PRP perfusion in CE patients enhances pregnancy and live birth rates, improves pregnancy outcomes post-FET, and demonstrates superior efficacy in endometrial repair and receptivity with two PRP perfusions compared to a single perfusion. This provides a safe and effective therapeutic option for optimizing outcomes in CE patients with prior implantation failure.

The subcortical visual pathway is generally thought to be involved in dangerous information processing, such as fear processing and defensive behavior. A recent study, published in Human Brain Mapping, shows a new function of the subcortical pathway involved in the fast processing of non-emotional object perception. Rapid object processing is a critical function of visual system. Topological perception theory proposes that the initial perception of objects begins with the extraction of topological property (TP). However, the mechanism of rapid TP processing remains unclear. The researchers investigated the subcortical mechanism of TP processing with transcranial magnetic stimulation (TMS). They find that a subcortical magnocellular pathway is responsible for the early processing of TP, and this subcortical processing of TP accelerates object recognition. Based on their findings, we propose a novel training approach called subcortical magnocellular pathway training (SMPT), aimed at improving the efficiency of the subcortical M pathway to restore visual and attentional functions in disorders associated with subcortical pathway dysfunction.

Research on IgG4-related disease (IgG4-RD), an autoimmune condition recognized to be a unique disease entity only two decades ago, has processed from describing patients' symptoms and signs to summarizing its critical pathological features, and further to investigating key pathogenic mechanisms. Challenges in gaining a better understanding of the disease, however, stem from its relative rarity-potentially attributed to underrecognition-and the absence of ideal experimental animal models. Recently, with the development of various high-throughput techniques, "omics" studies at different levels (particularly the single-cell omics) have shown promise in providing detailed molecular features of IgG4-RD. While, the application of omics approaches in IgG4-RD is still at an early stage. In this paper, we review the current progress of omics research in IgG4-RD and discuss the value of machine learning methods in analyzing the data with high dimensionality.
Humans ; Immunoglobulin G4-Related Disease/metabolism* ; Immunoglobulin G/metabolism* ; Machine Learning ; Animals ; Proteomics/methods*

Methods: Seventy-five patients with atlas fracture were included from January 2015 to December 2020. Based on the anatomy of the fracture line, atlas fractures were divided into three types. Each type was divided into two subtypes according to the fracture displacement. Unweighted Cohen kappa coefficients were applied to evaluate the reliability and reproducibility. Results: According to the new classification, 17 cases of type A1, 12 of type A2, seven of type B1, 13 of type B2, 12 of type C1, and 14 of type C2 were identified. The K-values of the interobserver and intraobserver reliability were 0.846 and 0.912, respectively, for the new classification. The K-values of interobserver reliability for types A, B, and C were 0.843, 0.799, and 0.898, respectively. The K-values of intraobserver reliability for types A, B, and C were 0.888, 0.910, and 0.935, respectively. The mean K-values of the interobserver and intraobserver reliability for subtypes were 0.687 and 0.829, respectively. Conclusions The new classification of atlas fractures can cover nearly all atlas fractures. This system is the first to evaluate the severity of fractures based on the C1 articular facet and fracture displacement and strengthen the anatomy ring of the atlas. It is concise, easy to remember, reliable, and reproducible.

Methods: Seventy-five patients with atlas fracture were included from January 2015 to December 2020. Based on the anatomy of the fracture line, atlas fractures were divided into three types. Each type was divided into two subtypes according to the fracture displacement. Unweighted Cohen kappa coefficients were applied to evaluate the reliability and reproducibility. Results: According to the new classification, 17 cases of type A1, 12 of type A2, seven of type B1, 13 of type B2, 12 of type C1, and 14 of type C2 were identified. The K-values of the interobserver and intraobserver reliability were 0.846 and 0.912, respectively, for the new classification. The K-values of interobserver reliability for types A, B, and C were 0.843, 0.799, and 0.898, respectively. The K-values of intraobserver reliability for types A, B, and C were 0.888, 0.910, and 0.935, respectively. The mean K-values of the interobserver and intraobserver reliability for subtypes were 0.687 and 0.829, respectively. Conclusions The new classification of atlas fractures can cover nearly all atlas fractures. This system is the first to evaluate the severity of fractures based on the C1 articular facet and fracture displacement and strengthen the anatomy ring of the atlas. It is concise, easy to remember, reliable, and reproducible.

Methods: Seventy-five patients with atlas fracture were included from January 2015 to December 2020. Based on the anatomy of the fracture line, atlas fractures were divided into three types. Each type was divided into two subtypes according to the fracture displacement. Unweighted Cohen kappa coefficients were applied to evaluate the reliability and reproducibility. Results: According to the new classification, 17 cases of type A1, 12 of type A2, seven of type B1, 13 of type B2, 12 of type C1, and 14 of type C2 were identified. The K-values of the interobserver and intraobserver reliability were 0.846 and 0.912, respectively, for the new classification. The K-values of interobserver reliability for types A, B, and C were 0.843, 0.799, and 0.898, respectively. The K-values of intraobserver reliability for types A, B, and C were 0.888, 0.910, and 0.935, respectively. The mean K-values of the interobserver and intraobserver reliability for subtypes were 0.687 and 0.829, respectively. Conclusions The new classification of atlas fractures can cover nearly all atlas fractures. This system is the first to evaluate the severity of fractures based on the C1 articular facet and fracture displacement and strengthen the anatomy ring of the atlas. It is concise, easy to remember, reliable, and reproducible.

In recent years, mesenchymal stem cell-derived exosomes (MSC-EXO) have garnered increasing attention in the field of stomatology and have become an established research area in biomedical research. This article reviews the engineering of exosomes derived from mesenchymal stem cells and their application in the field of stomatology, in order to provide new ideas for the development of stomatology. Exosomes are nanoscale membrane vesicles secreted by cells and contain a variety of proteins, RNAs, lipids, and other biomolecules. They are transported through the circulatory system and can interact with other cells to regulate their biological behavior and participate in a variety of physiological and pathological processes. In the treatment of oral diseases, exosomes have shown great potential due to their natural biological activity and versatility. However, studies have found that relying solely on the function of natural exosomes may not fully meet the complex clinical requirements. Therefore, the concept of engineered exosomes has emerged. Engineered exosomes can be modified by bioengineering technology to enhance their targeting, allowing them to reach the lesion site more accurately. At the same time, engineered exosomes can also be surface modified or loaded internally to carry specific therapeutic molecules, such as drugs, gene editing tools or signaling molecules to improve the therapeutic effect. In addition, this engineered treatment can also confer greater stability to exosomes, making them better able to resist clearance by the immune system when circulating in the body, extending their half-life, and improving the effectiveness of treatment. Although engineered exosomes have attracted extensive attention in the fields of stomatology and other fields, their application is still mainly in the stage of basic research. To promote the clinical application of engineered exosomes, it is necessary to provide more sufficient evidence of biocompatibility and clarify their therapeutic effect and mechanism.

Diterpenoid ferruginol is a key intermediate in biosynthesis of active ingredients such as tanshinone and carnosic acid.However, the traditional process of obtaining ferruginol from plants is often cumbersome and inefficient. In recent years, the increasingly developing gene editing technology has been gradually applied to the heterologous production of natural products, but the production of ferruginol in microbe is still very low, which has become an obstacle to the efficient biosynthesis of downstream chemicals, such as tanshinone. In this study, miltiradiene was produced by integrating the shortened diterpene synthase fusion protein,and the key genes in the MVA pathway were overexpressed to improve the yield of miltiradiene. Under the shake flask fermentation condition, the yield of miltiradiene reached about(113. 12±17. 4)mg·L~(-1). Subsequently, this study integrated the ferruginol synthase Sm CYP76AH1 and Sm CPR1 to reconstruct the ferruginol pathway and thereby realized the heterologous synthesis of ferruginol in Saccharomyces cerevisiae. The study selected the best ferruginol synthase(Il CYP76AH46) from different plants and optimized the expression of pathway genes through redox partner engineering to increase the yield of ferruginol. By increasing the copy number of diterpene synthase, CYP450, and CPR, the yield of ferruginol reached(370. 39± 21. 65) mg·L~(-1) in the shake flask, which was increased by 21. 57-fold compared with that when the initial ferruginol strain JMLT05 was used. Finally, 1 083. 51 mg·L~(-1) ferruginol was obtained by fed-batch fermentation, which is the highest yield of ferruginol from biosynthesis so far. This study provides not only research ideas for other metabolic engineering but also a platform for the construction of cell factories for downstream products.
Saccharomyces cerevisiae/genetics* ; Diterpenes/metabolism* ; Metabolic Engineering ; Fermentation ; Abietanes