ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Background: Visceral white adipose tissue (vWAT) inflammation is a critical pathology of obesity-caused heart damage and is closely associated with adipocyte endoplasmic reticulum (ER) dysfunction. Serine (or cysteine) peptidase inhibitor, clade A, member 3C (Serpina3c) has been identified as an adipokine with anti-vWAT inflammatory effects. However, it remains unclear whether Serpina3c deficiency promotion of vWAT inflammation involves adipocyte ER dysfunction and whether it further contributes to heart damage in obesity. Methods: Wild type and Serpina3c knockout (Serpina3c–/–) mice were fed a high-fat diet (HFD) for 12 weeks. An adeno-associated virus (AAV) was injected locally into epididymal white adipose tissue (eWAT) of Serpina3c–/– mice to induce eWAT-adipocyte- specific overexpression of Serpina3c (AAV-Serpina3c) or knockdown of hypoxia-inducible factor 1α (AAV-shHIF1α). In vitro experiments were performed in 3T3-L1 adipocytes. Results: Serpina3c–/– mice exhibited more severe eWAT, serum and heart inflammation after HFD feeding. Consistently, these adverse phenotypes were mitigated in AAV-Serpina3c and AAV-shHIF1α mice. Mechanistically, ER oxidoreductase 1α (Ero1α) and protein disulfide isomerase (PDI) family members PDIA3 and PDIA4 were found to be target genes of HIF1α. In the obese mice, Serpina3c deficiency caused adipocyte more hypertrophy, and activated HIF1α-Ero1α/PDI mediated ER overoxidation and ER stress in eWAT. Subsequently, this led to increased adipocyte apoptosis and chemokine production and decreased adiponectin expression, which promoted macrophage infiltration and M1 polarization in eWAT, thus exacerbating eWAT inflammation and ultimately facilitating serum and distal heart inflammation. Conclusion These findings indicate that Serpina3c is a significant regulator of adipocyte ER redox homeostasis, thus highlighting Serpina3c as a potential therapeutic target for obesity-related eWAT inflammation and heart damage.

Owing to its inherent advantages—such as being non-destructive, rapid, highly molecule-specific, and minimally interfered with by moisture—Raman spectroscopy has been widely adopted in the fields of skin barrier function assessment, monitoring the transdermal penetration of active cosmetic ingredients, and the identification and quality control of cosmetic products. Despite these strengths, the practical application of this technique faces a significant bottleneck: the strong fluorescence background generated by endogenous skin components and exogenous cosmetic additives. Endogenous skin substances, such as structural proteins (e.g., collagen and elastin), metabolic coenzymes (e.g., nicotinamide adenine dinucleotide), and pigments (e.g., melanin), together with exogenous cosmetic constituents like organic colorants, chemical sunscreens, and fragrances, often possess strong absorption and emission characteristics. When excited by lasers, these components produce a fluorescence background that can be 10⁶ to 10⁸ times stronger than the Raman scattering signals, effectively masking the inherently weak vibrational fingerprint information. In recent years, driven by the rapid development of optoelectronic hardware and artificial intelligence algorithms, fluorescence suppression strategies have evolved from isolated, single-method approaches into comprehensive, multi-level synergistic systems. These systems are categorized into three distinct tiers: sample preparation, signal acquisition, and data processing. At the sample preparation level, techniques such as photobleaching and surface-enhanced Raman spectroscopy (SERS) are employed to eliminate or bypass the generation of fluorescence at the source. At the signal acquisition level, instrumental improvements—including the use of long-wavelength near-infrared excitation (typically 785 nm or 1 064 nm), confocal spatial filtering, and shifted excitation Raman difference spectroscopy (SERDS)— are utilized to physically isolate Raman signals from the fluorescence background. Furthermore, at the data processing level, numerical baseline correction methods such as polynomial fitting, penalized least squares (e.g., airPLS, arPLS), wavelet transform, and derivative algorithms are increasingly integrated into the analytical pipeline to extract Raman spectral features from mixed signals without increasing hardware costs or acquisition time. This review provides a systematic categorization and critical evaluation of these fluorescence suppression methods, detailing their underlying principles, technical advantages, and inherent limitations in diverse experimental setups. By focusing on critical application scenarios—including skin barrier assessment, percutaneous absorption monitoring, the routine quality control of cosmetics, and the emerging field of portable on-site detection—this paper explores the current state of technique selection and optimization. Finally, the article discusses future development trends, emphasizing the necessity of constructing adaptive, tiered suppression strategies, developing intelligent and automated data processing algorithms, and promoting the integration of portable, multi-modal diagnostic devices. The objective of this review is to provide a comprehensive technical reference to facilitate the transition of Raman spectroscopy from a specialized laboratory tool into a routine, robust analytical platform for advancements in skin science and cosmetic research.

Objective To verify the efficacy of a domestic human DNA quantification kit based on real-time fluorescence quantitative PCR in detecting the total human DNA concentration,male DNA concen-tration in mixed male/female DNA samples,the degree of DNA degradation and inhibitor tolerance.Methods Samples with different concentrations,different male/female ratios,different concentrations of inhibitors,and different degradation degrees were tested using the domestic human DNA quantification kit based on real-time fluorescence quantitative PCR.This kit was compared with a similar product on the market and was applied to the detection of DNA from real cases.Results This human DNA quan-tification kit can effectively detect human DNA as low as 0.001 65 ng/μL,and 6.25 pg/μL of male DNA in mixed samples with a male-to-female ratio of 1∶15 000.Even when the sample contains as high as 400 ng/μL of humic acid or 1 000 μmol/L of hemin alone,the DNA concentration can still be accurately detected.The degradation index can effectively characterize the degradation degree of the sample.This kit has been successfully applied in forensic practice.Conclusion This human DNA quan-tification kit is accurate and reliable in detection.It can accurately reflect the degradation of DNA and inhibitor tolerance.It has good performance in quantitative accuracy,determination of the male/female ratio in mixed samples,and inhibitor tolerance.It has application potential in forensic case examination.

Objective To investigate the protective effects of the ANXA1(Annexin A1)mimetic peptide Ac2-26 on mice with severe heatstroke(HS)and its underlying mechanisms.Methods Twenty-four adult healthy male C57BL/6J mice weighing 20-25 g were randomly divided into four groups using a simple random sampling method:control group(Con group),Con+Ac2-26 group,severe heatstroke group(HS group),and severe heatstroke+Ac2-26 group(HS+Ac2-26 group),with 6 mice in each group.Mice in Con+Ac2-26 group and HS+Ac2-26 group were injected intraperitoneally with Ac2-26(6 mg/kg),and the remaining mice of two groups were injected intraperitoneally with normal saline of equivalent volume.One hour after drug administration,mice in HS group and HS+Ac2-26 group were placed in a high-temperature and high-humidity simulated environment[(37.0±0.5)℃,75%±5%humidity],while mice in Con group and Con+Ac2-26 were kept in a room temperature and humidity environment[(24±0.5)℃and 40±5%humidity]throughout the experiment.The anal temperature of the mice was recorded every 5 minutes;when the anal temperature of mice in HS group and HS+Ac2-26 group reached 42℃,they were removed from the high-temperature environment and placed in a room temperature environment for 6 hours of rewarming,after which blood samples of mice in each group were collected.Flow cytometry was used to detect the proportion of neutrophils and the expression levels of Cd11b and Cd62L(molecules related to neutrophil activation).Enzyme-linked immunosorbent assay(ELISA)was used to measure the plasma levels of tumor necrosis factor-α(TNF-α)and interleukin-6(IL-6),IL-10,and IL-4.Hematoxylin-eosin staining(HE staining)was performed to observe the pathological changes in lung,kidney and liver tissues.Furthermore,RNA sequencing(RNA-seq)was conducted to detect changes in neutrophil gene expression.Results Compared with Con group,Con+Ac2-26 group showed no significant increase in neutrophil proportion,decreased expression of CD62L and CD11b,no significant changes in cytokine levels,and no obvious pathological changes in lung,kidney,or liver tissues.Compared with HS group,the time for mice in HS+Ac2-26 group to reach an anal temperature of 42℃and the time to develop hypothermia after model establishment were both prolonged(P<0.05);the proportion of neutrophils was reduced(P<0.05);the plasma levels of pro-inflammatory cytokines TNF-α and IL-6 were decreased(P<0.05);and the plasma level of anti-inflammatory cytokine IL-10 was increased(P<0.05).HE staining results showed that compared with HS group,HS+Ac2-26 group had a reduced range of inflammatory cell infiltration in lung,kidney,and liver tissues.RNA-seq results revealed that compared with HS group,HS+Ac2-26 group had decreased expression levels of molecules related to the oxidative phosphorylation signaling pathways and neutrophil extracellular trap(NETs).Conclusion Annexin A1 mimetic peptide Ac2-26 may reduce the pro-inflammatory response and alleviate the heatstroke-induced organ histopathologic damage in heatstroke mice by inhibiting oxidative phosphorylation in heat-stressed cells and NETs formation.

Ischemic stroke (IS) is a globally life-threatening disease. Presently, few therapeutic medicines are available for treating IS, and rt-PA is the only drug approved by the US Food and Drug Administration (FDA) in the US. In fact, many agents showing excellent neuroprotection but no blood flow-improving activity in animals have not achieved ideal clinical efficacy, while thrombolytic drugs only improving blood flow without neuroprotection have limited their wider application. To address these challenges and meet the huge unmet clinical need, we have designed and identified a novel compound AAPB with dual effects of neuroprotection and cerebral blood flow improvement. AAPB significantly reduced cerebral infarction and neural function deficit in tMCAO rats, pMCAO rats, and IS rhesus monkeys, as well as displayed exceptional safety profiles and excellent pharmacokinetic properties in rats and dogs. AAPB has now entered phase I of clinical trials fighting IS in China.

OBJECTIVE: Exposure to polycyclic aromatic hydrocarbons (PAHs) or metal(loid)s individually has been associated with neural tube defects (NTDs). However, the impacts of PAH and metal(loid) co-exposure and potential interaction effects on NTD risk remain unclear. We conducted a case-control study in China among population with a high prevalence of NTDs to investigate the combined effects of PAH and metal(loid) exposures on the risk of NTD. METHODS: Cases included 80 women who gave birth to offspring with NTDs, whereas controls were 50 women who delivered infants with no congenital malformations. We analyzed the levels of placental PAHs using gas chromatography and mass spectrometry, PAH-DNA adducts with ³²P-post-labeling method, and metal(loid)s with an inductively coupled plasma mass spectrometer. Unconditional logistic regression was employed to estimate the associations between individual exposures and NTDs. Least absolute shrinkage and selection operator (LASSO) penalized regression models were used to select a subset of exposures, while additive interaction models were used to identify interaction effects. RESULTS: In the single-exposure models, we found that eight PAHs, PAH-DNA adducts, and 28 metal(loid)s were associated with NTDs. Pyrene, selenium, molybdenum, cadmium, uranium, and rubidium were selected through LASSO regression and were statistically associated with NTDs in the multiple-exposure models. Women with high levels of pyrene and molybdenum or pyrene and selenium exhibited significantly increased risk of having offspring with NTDs, indicating that these combinations may have synergistic effects on the risk of NTDs. CONCLUSION Our findings suggest that individual PAHs and metal(loid)s, as well as their interactions, may be associated with the risk of NTDs, which warrants further investigation.
Humans ; Neural Tube Defects/chemically induced* ; Polycyclic Aromatic Hydrocarbons/adverse effects* ; Female ; Case-Control Studies ; China/epidemiology* ; Adult ; Pregnancy ; Environmental Pollutants ; Maternal Exposure/adverse effects* ; Metals/toxicity* ; Young Adult ; Risk Factors

OBJECTIVE: To identify the key features of facial and tongue images associated with anemia in female populations, establish anemia risk-screening models, and evaluate their performance. METHODS: A total of 533 female participants (anemic and healthy) were recruited from Shuguang Hospital. Facial and tongue images were collected using the TFDA-1 tongue and face diagnosis instrument. Color and texture features from various parts of facial and tongue images were extracted using Face Diagnosis Analysis System (FDAS) and Tongue Diagnosis Analysis System version 2.0 (TDAS v2.0). Least Absolute Shrinkage and Selection Operator (LASSO) regression was used for feature selection. Ten machine learning models and one deep learning model (ResNet50V2 + Conv1D) were developed and evaluated. RESULTS: Anemic women showed lower a-values, higher L- and b-values across all age groups. Texture features analysis showed that women aged 30-39 with anemia had higher angular second moment (ASM)and lower entropy (ENT) values in facial images, while those aged 40-49 had lower contrast (CON), ENT, and MEAN values in tongue images but higher ASM. Anemic women exhibited age-related trends similar to healthy women, with decreasing L-values and increasing a-, b-, and ASM-values. LASSO identified 19 key features from 62. Among classifiers, the Artificial Neural Network (ANN) model achieved the best performance [area under the curve (AUC): 0.849, accuracy: 0.781]. The ResNet50V2 model achieved comparable results [AUC: 0.846, accuracy: 0.818]. CONCLUSION Differences in facial and tongue images suggest that color and texture features can serve as potential TCM phenotype and auxiliary diagnostic indicators for female anemia.
Humans ; Female ; Tongue/diagnostic imaging* ; Adult ; Anemia/diagnosis* ; Middle Aged ; Face/diagnostic imaging* ; Young Adult ; Machine Learning

Diterpenoid ferruginol is a key intermediate in biosynthesis of active ingredients such as tanshinone and carnosic acid.However, the traditional process of obtaining ferruginol from plants is often cumbersome and inefficient. In recent years, the increasingly developing gene editing technology has been gradually applied to the heterologous production of natural products, but the production of ferruginol in microbe is still very low, which has become an obstacle to the efficient biosynthesis of downstream chemicals, such as tanshinone. In this study, miltiradiene was produced by integrating the shortened diterpene synthase fusion protein,and the key genes in the MVA pathway were overexpressed to improve the yield of miltiradiene. Under the shake flask fermentation condition, the yield of miltiradiene reached about(113. 12±17. 4)mg·L~(-1). Subsequently, this study integrated the ferruginol synthase Sm CYP76AH1 and Sm CPR1 to reconstruct the ferruginol pathway and thereby realized the heterologous synthesis of ferruginol in Saccharomyces cerevisiae. The study selected the best ferruginol synthase(Il CYP76AH46) from different plants and optimized the expression of pathway genes through redox partner engineering to increase the yield of ferruginol. By increasing the copy number of diterpene synthase, CYP450, and CPR, the yield of ferruginol reached(370. 39± 21. 65) mg·L~(-1) in the shake flask, which was increased by 21. 57-fold compared with that when the initial ferruginol strain JMLT05 was used. Finally, 1 083. 51 mg·L~(-1) ferruginol was obtained by fed-batch fermentation, which is the highest yield of ferruginol from biosynthesis so far. This study provides not only research ideas for other metabolic engineering but also a platform for the construction of cell factories for downstream products.
Saccharomyces cerevisiae/genetics* ; Diterpenes/metabolism* ; Metabolic Engineering ; Fermentation ; Abietanes