BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

BACKGROUND:Currently,treatment method for knee osteoarthritis includes oral medicine,joint cavity drug injection,and physiotherapy,but the curative effect is limited.Existing studies have confirmed that silicon-based bioceramics can promote cartilage and subchondral bone repair and vascular regeneration.OBJECTIVE:To explore the effect of different concentrations of silicon-based bioceramics injected into the knee joint cavity in the treatment of knee osteoarthritis in rats.METHODS:Silicon-based bioceramics-calcium silicate was prepared.Twenty-five SD rats were randomly divided into five groups,with five rats in each group.The healthy group did not receive any intervention,and the modeling group,low-dose calcium silicate group,high-dose calcium silicate group,and saline group used anterior cruciate ligament transection to establish bilateral knee osteoarthritis models.Four weeks after modeling,0.05 mL of 50 and 100 mg/mL calcium silicate solution were injected into the knee joint cavity in the low-dose calcium silicate group and high-dose calcium silicate group,respectively,and 0.05 mL of saline was injected into the knee joint cavity in the saline group,once a week for 4 consecutive weeks.In the fifth week of administration,bilateral knee joint Micro-CT detection,knee joint cartilage hematoxylin-eosin staining,and modified Mankin score were performed.RESULTS AND CONCLUSION:(1)Micro-CT quantitative analysis showed that compared with the healthy group,the volume fraction and number of trabeculae of the medial tibial plateau in the modeling group decreased(P＜0.05),and the separation of trabeculae increased(P＜0.05).Compared with the modeling group,the volume fraction and number of trabeculae of the medial tibial plateau in the low-dose calcium silicate group and the saline group increased(P＜0.05),and the separation of trabeculae decreased(P＜0.05).(2)Hematoxylin-eosin staining showed that the cartilage surface of the healthy group and the low-dose calcium silicate group was relatively smooth and flat,the chondrocytes were evenly distributed,without clustered chondrocytes,the tide line was complete,and the staining was uniform;the cartilage surface of the high-dose calcium silicate group was slightly uneven,the middle and deep cells were disordered,with a small number of clustered chondrocytes,the tide line was discontinuous,and the staining was uneven;the cartilage surface of the saline group and the modeling group was obviously rough,the cells were disordered,with a large number of clustered chondrocytes,the tide line disappeared,and the staining was uneven.The modified Mankin score of the healthy group was lower than that of the high-dose calcium silicate group,the saline group,and the modeling group(P＜0.05).The modified Mankin score of the high-dose calcium silicate group and the low-dose calcium silicate group was lower than that of the saline group and the modeling group(P＜0.05).(3)The results show that calcium silicate knee joint injection has a certain effect in the treatment of knee osteoarthritis.Compared with 100 mg/mL calcium silicate solution,50 mg/mL calcium silicate solution can promote the recovery of subchondral bone and cartilage.

BACKGROUND:Magnetic nanomaterials,as a hot topic in the biomedical field in recent years,are often used to enhance the targeted delivery of drugs to the affected area.OBJECTIVE:To investigate the effects of magnetic nano drug carriers on skeletal muscle injury markers and inflammatory responses in rats with sports injuries.METHODS:Magnetic nanoparticles were prepared.A total of 88 male SD rats were randomly divided into a blank group(n=8),an injury control group(n=32),a Yunnan Baiyao group(n=24),and a magnetic nano-drug carrier group(n=24)by using a random number table method.The latter three groups were modeled with exercise-induced muscle injury(treadmill slope of-16°,running speed of 16 m/min,and training time of 120 min).Immediately after exercise,after verifying the success of the model,Yunnan Baiyao patch was applied to the gastrocnemius muscle of the rats in the Yunnan Baiyao group.Yunnan Baiyao patch loaded with magnetic nanoparticles was applied to the gastrocnemius muscle of the rats in the magnetic nano-drug carrier group.At 24,48,and 120 hours after exercise,blood was drawn from the abdominal aorta of rats to detect the activities of creatine kinase and lactate dehydrogenase,as well as the levels of myoglobin,interleukin-6,and tumor necrosis factor-α.Hematoxylin-eosin staining was used to observe the infiltration of inflammatory cells in the gastrocnemius muscle.RESULTS AND CONCLUSION:(1)Compared with the blank group,the levels of myoglobin,creatine kinase,lactate dehydrogenase and tumor necrosis factorα in the injury control group at 24,48 and 120 hours after exercise were increased(P＜0.05),and the level of interleukin 6 at 24 and 120 hours after exercise was increased(P＜0.05).Compared with the injury control group,the level of myoglobin in the Yunnan Baiyao group at 24 and 48 hours after exercise was decreased(P＜0.05),the activities of creatine kinase and lactate dehydrogenase at 24,48 and 120 hours were decreased(P＜0.05),and the levels of interleukin 6 and tumor necrosis factor α at 120 hours after exercise were decreased(P＜0.05).Compared with the Yunnan Baiyao group,the level of myoglobin in the magnetic nano-drug carrier group at 24 and 48 hours after exercise was decreased(P＜0.05),the activities of creatine kinase and tumor necrosis factor α at 48 and 120 hours after exercise were decreased(P＜0.05),and the lactate dehydrogenase activity was reduced(P＜0.05).(2)Hematoxylin-eosin staining showed that a large number of inflammatory cells infiltrated in the muscle fibers of the injury control group 24 hours after exercise,and then the inflammatory cell infiltration gradually decreased,and the local damaged muscle fibers began to regenerate 120 hours after exercise.A large number of inflammatory cells infiltrated in the muscle fibers of the Yunnan Baiyao group and the magnetic nano-drug carrier group 24 hours after exercise,and then the inflammatory cell infiltration gradually decreased,and the damaged muscle fibers were regenerating 120 hours after exercise,and there was no significant difference from the blank group.(3)The results show that Yunnan Baiyao patch combined with magnetic nanoparticles can accelerate the recovery of exercise-induced muscle injury in rats,and the effect is better than that of Yunnan Baiyao alone.

BACKGROUND:Studies have found that probiotics have a certain preventive and therapeutic effect on peri-implantitis,and there are further explorations in the mechanism against peri-implantitis.OBJECTIVE:To review the mechanism and clinical application of probiotics in the treatment of peri-implantitis.METHODS:Relevant literature was searched on PubMed,Web of Science,CNKI,and WanFang Data,using the search terms of"probiotics,peri-implantitis,flora imbalance,immunoregulation,inflammatory reaction,mechanism of action"in Chinese and English.A total of 90 articles were finally included.RESULTS AND CONCLUSION:Probiotics have the following mechanisms.They can activate the anti-inflammatory mechanism by inhibiting the secretion of inflammatory factors and promoting the production of anti-inflammatory factors.They can destroy the cell wall of pathogenic bacteria by secreting microbial complexes and bacteriocins,reduce the pH value of biofilms,improve the composition of microorganisms in microecology,induce the change of bacterial community structure,and restore the balance of microbial population around implants.They have immunomodulatory effects and can enhance the resistance of the host oral mucosa to pathogenic bacteria in the surrounding area of the implant.In addition,probiotics can produce antibacterial compounds,offset the adhesion of pathogenic microorganisms,and regulate immune function.Through the above mechanisms,probiotics have certain potential in the adjuvant treatment of peri-implantitis,which can improve the clinical parameters of peri-implantitis and affect the microbiota.Probiotic therapy provides a new treatment option,but more long-term prospective studies are needed to further verify its effect.

BACKGROUND:A large number of studies have demonstrated that stem cell exosomes play an important role in the repair of bone defects,either directly as carriers for loading other small molecules or surface modifications,or by binding to biomaterials to promote the repair and regeneration of bone tissue.OBJECTIVE:To summarize the osteogenic mechanisms of stem cell exosomes from different sources and their research progress in bone defect repair.METHODS:Chinese search terms"stem cell,exosome,bone,biomaterial,carrier,bioceramic,polymer,metal,hydrogel,engineered exosome"were used to search CNKI.English search terms"stem cell,exosome,bone defect,biomaterial,carrier,bioceramic,ploymer,metal material,hydrogel,engineering exosome"were used to search PubMed database.According to the inclusion and exclusion criteria,77 relevant articles were finally included for summary.RESULTS AND CONCLUSION:Exosomes from stem cells of different origins can promote osteoblast proliferation and differentiation,promote angiogenesis,and regulate osteoclast activity and macrophage phenotype to promote bone formation and bone mineralization.In addition,many achievements of exosomes in the field of bone defect repair were described from two aspects:biomaterial-assisted exosomes and engineered exosomes.However,the current research on stem cell exosomes in bone tissue engineering is still insufficient,and most of these studies are limited to small animal models,while the treatment of bone defects in large animals,including humans,will be more complex,which will also become a major challenge for the treatment of bone defects.This will also be a great challenge in the dissemination of exosome therapy.

BACKGROUND:Arthroscopic anchor repair has become the main treatment method for rotator cuff tears at present.Among them,the insertion status of the anchor is a key factor in the success or failure of the operation.However,currently,the impact of the insertion depth of the anchor on the stress of the bone tunnel and the anchor under different bone density conditions remains unclear.OBJECTIVE:To explore the stress distribution of the bone tunnel and the anchor when the insertion depth of the anchor varies under different bone density conditions by using three-dimensional finite element analysis technology.METHODS:The CT image data of the humerus of volunteers were collected,and the models of the humerus and the anchor were constructed by using Mimics,3-Matic,and Solidworks software.In 3-Matic,holes with distances of 0,2,4,6,and 8 mm from the surface of the humerus were respectively created at the same position of the humerus and assembled with the anchor.In Mimics,values were assigned based on the CT gray value to obtain a model with normal bone mass(T value ≥-1.0).The parameters were changed to construct models with reduced bone mass(-2.5＜T value＜-1.0)and osteoporosis(T value＜-2.5).In each model,a 70 N pulling force was applied to the anchor along the direction tangent to the inner edge of the bone tunnel.The stress distribution and magnitude of the bone tunnel and the anchor when inserted at different depths under different bone density conditions were observed.RESULTS AND CONCLUSION:(1)When the insertion depth was the same,as the bone density decreased,the maximum equivalent stress of the anchor increased,while the maximum equivalent stress of the bone tunnel decreased.(2)When the bone density was the same,as the insertion depth of the anchor increased,the maximum equivalent stress of the anchor decreased.When the insertion depth was 4 mm,the stress of the bone tunnel was the smallest and the distribution was relatively uniform.The stress of the anchor was mainly distributed around the lower anchor hole and the proximal thread,and the stress of the bone tunnel was mainly at the part in contact with the proximal thread.The increase in the insertion depth would change the uniformity and pattern of the stress distribution,while the bone density had a relatively small impact on the stress distribution pattern.(3)It is concluded that the bone density of the humerus is crucial for the anchor repair of rotator cuff tears.It is recommended that clinicians measure the bone density of the greater tuberosity of the humerus before the operation.Excessive insertion depth of the anchor does not significantly increase its stability.Clinicians can conduct personalized preoperative assessments by using the finite element analysis method in combination with the actual situation of patients to achieve the best surgical results.

BACKGROUND:Steroid-induced osteonecrosis of the femoral head(SANFH)is a severe orthopedic disease characterized by interruption of the blood supply to the femoral head and necrosis of subchondral bone,leading to joint dysfunction.Long-term use of glucocorticoids is the main cause of SANFH,and its pathogenesis involves multiple factors,including intravascular coagulation and osteocyte apoptosis.Vascular endothelial growth factor A(VEGF-A),as a key angiogenic factor,has potential value in the treatment of SANFH.OBJECTIVE:To summarize the mechanisms of action of VEGF-A in SANFH,including its progress in promoting angiogenesis,anti-apoptosis,and lipid metabolism regulation,and to discuss the prospects for clinical application of VEGF-A targeted therapy.METHODS:Literature related to VEGF-A targeted regulation of angiogenesis in the treatment of SANFH was identified through searches of PubMed,Web of Science,CNKI,and WanFang databases from database inception to November 2024.After quality assessment,71 articles were selected,data were extracted by independent researchers,and disagreements were resolved through group discussions.RESULTS AND CONCLUSION:(1)VEGF-A binds to its receptors VEGFR-1 and VEGFR-2,activating downstream signaling pathways that promote the proliferation,migration,and angiogenesis of endothelial cells.Therefore,it can promote the formation of collateral circulation and improve blood supply to the area of bone necrosis.(2)Reduced expression of VEGF-A may lead to a decrease in the number of blood vessels within bone tissue,exacerbating the ischemic state of the femoral head.Furthermore,VEGF-A has anti-apoptotic effects and reduce apoptosis in osteocytes and bone marrow cells,thus protecting bone tissue.(3)The role of VEGF-A in regulating lipid metabolism and inflammatory responses,as well as promoting the osteogenic differentiation of bone marrow mesenchymal stem cells,provides a new perspective for the treatment of SANFH.(4)The development of VEGF-A protein delivery systems,such as lipid nanoparticles and exosome-based delivery systems,offers new possibilities for the clinical application of VEGF-A.(5)The research progress of VEGF-A in SANFH treatment has laid a solid foundation for the development of new treatment strategies and has opened up new avenues for future research directions and clinical applications.(6)With further clarification of the mechanisms of action of VEGF-A and continuous advancements in delivery technologies,more effective treatments will be provided for SANFH patients,improving their prognosis.

OBJECTIVE:Postoperative recurrence is a common complication of percutaneous endoscopic lumbar discectomy for lumbar disc herniation,which can significantly increase the risk of reoperation.A well-performing risk prediction model can help identify high-risk groups early and prevent postoperative recurrence.This study systematically evaluated the risk prediction model for postoperative recurrence after percutaneous endoscopic lumbar discectomy to provide a reference for surgical decision-making.METHODS:The PubMed,Embase,Web of Science,CNKI,WanFang Data,VIP,and CBM were electronically searched to collect studies on the recurrence risk prediction models after percutaneous endoscopic lumbar discectomy from inception to July 1,2024.Two reviewers independently screened the literature and extracted data.The models' risk of bias,applicability,and report quality were assessed using prediction model risk of bias assessment tool(PROBAST)and Transparent Reporting of a Multivariable Prediction Model for Individual Prognosis or Diagnosis(TRIPOD)tools,respectively.Meta-analysis of postoperative recurrence rate of percutaneous endoscopic lumbar discectomy and related predictors was performed using Revman 5.4 software.RESULTS:(1)A total of 15 studies were included,all of which were retrospective studies,including 24 models for predicting the risk of recurrence after percutaneous endoscopic lumbar discectomy.(2)The PROBAST evaluation results indicated that all 15 studies exhibited a high risk of bias.Regarding applicability,two studies demonstrated a low risk,while 13 presented a high risk.(3)Regarding the TRIPOD reporting quality,the overall quality across the 15 studies was low.The primary reasons for this low compliance included the failure to report blinding,a lack of explanation for the sample size calculation method,lack of detailed description of missing data processing methods,and lack of information such as introduction to the model used.(4)Furthermore,the area under the receiver operating characteristic curve for the model ranged from 0.684 to 0.972,with the number of potential predictor variables varying from 15 to 28.(5)The results of meta-analysis showed that the postoperative recurrence rate of lumbar disc herniation patients treated with percutaneous endoscopic lumbar discectomy was 12％(95％CI=9.0％-15.0％),Modic changes(OR=6.72,95％CI=3.90-11.59),body mass index(OR=1.28,95％CI=1.10-1.49),work intensity(OR=3.22,95％CI=1.85-5.59),age(OR=2.28,95％CI=1.50-3.48),and smoking history(OR=2.65,95％CI=1.75-4.00)were independent influencing factors for postoperative recurrence of percutaneous endoscopic lumbar discectomy(all P＜0.05).CONCLUSION:The overall predictive performance of the recurrence risk prediction models after percutaneous endoscopic lumbar discectomy is satisfactory;however,the model exhibits a high overall risk of bias and applicability,coupled with low reporting quality.Additionally,there is a lack of prospective research and external validation.Future,risk prediction models should consider factors such as Modic changes,body mass index,work intensity,age,and smoking history as potential predictors.

BACKGROUND:The pathogenesis of steroid-induced osteonecrosis of the femoral head is complex,involving vascular endothelial injury,osteocyte apoptosis,inflammatory responses,and bone metabolism disorders.MicroRNAs(miRNAs),as key regulators of gene expression,play an important role in steroid-induced osteonecrosis of the femoral head.OBJECTIVE:To comprehensively analyze the regulatory role of miRNAs in steroid-induced osteonecrosis of the femoral head and to evaluate their potential as biomarkers and therapeutic tools.METHODS:Relevant literature was retrieved from PubMed,Web of Science,CNKI,and WanFang databases using specific keywords,and articles were selected based on the inclusion and exclusion criteria.By reading titles,abstracts,or full texts,articles with poor relevance or repetitive content were excluded,and 76 articles were finally included for analysis.RESULTS AND CONCLUSION:miRNAs regulate gene expression by binding to the 3'untranslated region of target mRNAs,affecting cell differentiation,proliferation,apoptosis,and stress responses.Specific miRNAs such as miR-33-5p,miR-99a,miR-106b-5p,miR-155,miR-146a,and miR-21 play a central regulatory role in vascular injury,inflammatory responses,osteocyte differentiation,and apoptosis in steroid-induced osteonecrosis of the femoral head.Additionally,the expression patterns of miRNAs are closely related to the pathogenesis of steroid-induced osteonecrosis of the femoral head,showing potential as biomarkers.Although miRNAs shows great potential as biomarkers in therapeutic strategies,the current limitation of sample size and lack of multi-population validation restrict the universality and reliability of the results.Moreover,the efficacy and safety of miRNA therapeutic strategies(including off-target effects and delivery issues)remain major challenges in realizing clinical applications.