Objective To construct a prediction model for the population with hypertension and diabetes to assess the risk of chronic kidney disease (CKD), and to provide a scientific basis for formulating targeted CKD prevention and control measures. Methods Based on physical examination data from community residents aged 60 years and above in Nanjing in 2022, 10 221 patients with hypertension and diabetes were selected as the study subjects. Variables associated with CKD prevalence were screened using univariate analysis, and further variable selection was performed using LASSO regression. Finally, a CKD risk prediction model was constructed based on logistic regression. The model's performance was evaluated using the ROC curve and calibration curve. Results The prevalence rate of CKD in the study population was 22.71%, with a mean age of 71.66 years. LASSO regression identified seven variables associated with CKD: age, blood urea nitrogen (BUN), hemoglobin, uric acid, triglyceride-glucose (TyG) index, urine protein-to-creatinine ratio (UPCR), and medical insurance type. The final logistic regression model incorporated six variables: age [OR=1.067 (95% CI: 1.058-1.076)], BUN [OR=1.377 (95% CI: 1.338-1.418)], hemoglobin [OR=0.992 (95% CI: 0.989-0.995)], uric acid [OR=1.004 (95% CI: 1.003-1.004)], TyG index [OR=1.445 (95% CI: 1.324-1.577)], and self-payment medical insurance [OR=1.732 (95% CI: 1.542-1.945)]. The model had an AUC of 0.759 (95% CI: 0.747-0.770) and a Brier score of 0.140 (95% CI: 0.136-0.145), indicating good predictive performance. The calibration curve showed good agreement between the predicted risk and the observed value. Conclusion The constructed LASSO-logistic regression risk prediction model in this study can effectively assess the risk of CKD in elderly individuals aged 60 years and above with hypertension and diabetes, providing a basis for early identification of high-risk individuals and the formulation of targeted CKD prevention and control measures.

Depression is a common mental disorder that falls under the category of "stagnation syndrome" in traditional Chinese medicine （TCM）. Its complex pathogenesis poses challenges for the development of novel therapeutic agents. Currently， clinically used antidepressants are often accompanied by significant side effects， and statistics show that about one-third of patients do not respond to these medications. TCM demonstrates advantages in the treatment of depression through multi-target， multi-pathway and multi-mechanistic approaches. Pinelliae Rhizoma， a phlegm-resolving herb， exhibits effects such as drying dampness and resolving phlegm， as well as eliminating stuffiness and reducing masses. The characteristics of harmonizing Yin and Yang and resolving stagnation in the middle energizer align precisely with the pathogenesis of depression syndrome， demonstrating therapeutic efficacy in affected patients. Literature studies have found that the active ingredients of Pinelliae Rhizoma， such as cavidine， baicalein， β-sitosterol， as well as Pinelliae Rhizoma herb pairs， such as Pinelliae Rhizoma-Magnoliae Officinalis Cortex， Pinelliae Rhizoma-husked sorghum， Pinelliae Rhizoma-Prunellae Spica， exhibit significant antidepressant effects. Furthermore， TCM formulas containing Pinelliae Rhizoma as the principal therapeutic agent， such as Banxia Xiexin Tang， Banxia Houpo Tang， and Wendan Tang， as well as formulas incorporating Pinelliae Rhizoma like compound Xiaochaihu Tang， Chaihu Jia Longgu Muli Tang， and Erchen Tang， have also demonstrated favorable antidepressant efficacy. The antidepressant mechanism of these agents may involve modulation of 5-hydroxytryptamine （5-HT） and dopamine （DA） levels， up-regulation of brain-derived neurotrophic factor （BDNF） expression， regulation of the hypothalamus-pituitary-adrenal （HPA） axis， reduction of oxidative stress， modulation of nuclear transcription factor-κB （NF-κB） signaling pathway， and inhibition of microglia-mediated inflammatory responses. This review summarized the antidepressant mechanisms and clinical applications of the active components， herb pairs， and TCM formulas containing Pinelliae Rhizoma， aiming to provide a reference for modern research on the use of Pinelliae Rhizoma in antidepressant therapy.

Background Work-related musculoskeletal disorders (WMSDs) are a major occupational health concern, particularly among workers exposed to adverse ergonomic conditions. Manganese production involves heavy physical demands, yet research on WMSDs among manganese workers remains limited. Objective To investigate the prevalence and influencing factors of WMSDs among manganese workers in a manganese enterprise in Guangxi. Methods A cross-sectional survey was conducted from May to June 2024 on workers at a manganese factory in Guangxi. The Chinese Musculoskeletal Disorders Questionnaire was used to collect information on demographic characteristics, distribution of musculoskeletal symptoms, and work-related exposures. χ² test was applied to compare differences in positive WMSDs rates across groups, and logistic regression analysis was performed to identify associated factors. Results A total of 1476 workers were enrolled in the study after pre-determined inclusion and exclusion criteria. The overall prevalence of WMSDs was 34.15%. The most commonly affected body regions were the lower back (17.28%), neck (16.67%), and shoulders (13.82%). The results of logistic regression analysis indicated that female, older age, and education level of college or above were associated with a higher risk of WMSDs (P<0.05). Awkward working postures were significantly associated with WMSDs in corresponding body regions; in particular, awkward postures of the neck, upper limbs, trunk, and lower limbs were related to an increased risk of WMSDs in multiple body sites (P<0.05). In addition, poor lighting conditions, high workplace temperature, frequent or sustained arm support during work, and high job demands were associated with an increased risk of overall or site-specific WMSDs (P<0.05). Conclusion The high prevalence of WMSDs among manganese workers is closely associated with demographic characteristics, working postures, and work environment and organizational factors. Targeted ergonomic interventions focusing on high-risk body regions and key ergonomic exposures are warranted to reduce the risk of WMSDs among manganese workers.

This consensus will introduce the characteristics of fillers used in the surgical cavities of domestic nasal surgery patients based on relevant literature and expert opinions. It will also provide recommendations for the selection of cavity fillers for different nasal diseases, with chronic sinusitis as a representative example.
Humans ; Nasal Cavity/surgery* ; Nasal Surgical Procedures ; China ; Consensus ; Sinusitis/surgery* ; Dermal Fillers

Allergen-specific immunotherapy（AIT） remains the only therapeutic approach with the potential to modify the natural course of allergic rhinitis（AR）. Nevertheless, considerable inter-individual variability exists in patients'responses to AIT. To facilitate more reliable assessment of treatment efficacy, the China Rhinopathy Research Cooperation Group（CRRCG） convened young and middle-aged nasal experts in China to formulate the present consensus. The recommended subjective outcome measures for AIT comprise symptom scores, medication scores, combined symptom and medication scores, quality-of-life assessments, evaluation of disease control, and assessment of comorbidities. Objective indicators may supplement these measures. Currently available objective approaches include skin prick testing, nasal provocation testing, and allergen exposure chambers. However, these methods remain constrained by practical limitations and are not yet appropriate for routine implementation in clinical efficacy evaluation. In addition, several biomarkers, including sIgE and the sIgE/tIgE ratio, sIgG4, serum IgE-blocking activity, IgA, cytokines and chemokines, as well as immune cell surface molecules and their functional activity, have been shown to have associations with AIT outcomes. While these biomarkers may complement subjective assessments, they are subject to significant limitations. Consequently, large-scale multicenter trials and real-world evidence are required to strengthen the evidence base. The present consensus underscores the necessity of integrating patients'subjective experiences with objective testing throughout the treatment process, thereby providing a more comprehensive and accurate framework for efficacy evaluation. Looking forward, future investigations should prioritize the incorporation of multi-omics data and artificial intelligence methodologies, which hold promise for overcoming current limitations in assessment strategies and for advancing both the standardization and personalization of AIT.
Humans ; Allergens/immunology* ; China ; Consensus ; Desensitization, Immunologic ; Immunoglobulin E ; Quality of Life ; Rhinitis, Allergic/therapy* ; Treatment Outcome ; East Asian People

OBJECTIVES: To investigate the associations between Tau protein deposition and brain biochemical metabolites detected by proton magnetic resonance spectroscopy (¹H-MRS) in patients with advanced Alzheimer's disease (AD). METHODS: From April, 2022 to December, 2024, 64 Tau-positive AD patients and 29 healthy individuals underwent ¹⁸F-APN-1607 PET/MR and simultaneously acquired multi-voxel ¹H-MRS in the Department of Nuclear Medicine, Nanjing First Hospital. Visual analysis and voxel-based analysis of PET/MR data were performed to investigate the Tau protein deposition patterns in AD patients. Valid voxels within the ¹H-MRS field of view were selected, and their standardized uptake value ratio (SUVr) in PET and metabolite levels of N-acetylaspartate (NAA), choline (Cho), creatine (Cr), NAA/Cr, and Cho/Cr were recorded. The Tau-positive (Tau⁺) voxels and Tau-negative (Tau^-) voxels of the AD patients were compared for PET and ¹H-MRS parameters, and the correlations between the metabolites and Tau PET SUVr within Tau⁺ voxels were analyzed. RESULTS: Significant Tau protein deposition were observed in the AD patients, involving mainly the bilateral frontal lobes (30.07%), parietal lobes (29.96%), temporal lobes (21.07%), and occipital lobes (15.89%). A total of 1422 valid voxels in AD group (including 994 Tau⁺ and 428 Tau^- voxels) and 814 voxels in the control group were selected. The AD patients showed significantly decreased NAA level and increased SUVr compared with the control group (P<0.05). Subgroup analyses revealed that Tau⁺ voxels had higher SUVr and lower Cr and Cho/Cr than Tau^- voxels (P<0.05). Compared with the control group, Tau⁺ voxels exhibited higher SUVr and lower Cr (P<0.05), while Tau^- voxels showed lower NAA (P=0.004). No significant differences were found in Cho or NAA/Cr among the subgroups (P>0.05). Within Tau⁺ voxels, NAA, Cho, and Cr were negatively correlated with SUVr (P<0.001). CONCLUSIONS The patients with progressive AD have significant Tau protein deposition in the brain, which is correlated with alterations in metabolite levels. Decreased NAA is more prominent in early or pre-tau deposition stages, while Cr changes is more significant in the regions with Tau protein deposition, suggesting the potential of NAA and Cr as biomarkers for Tau protein deposition in AD for disease monitoring and treatment evaluation.
Humans ; Alzheimer Disease/diagnostic imaging* ; Aspartic Acid/metabolism* ; tau Proteins/metabolism* ; Creatine/metabolism* ; Brain/metabolism* ; Biomarkers/metabolism* ; Positron-Emission Tomography ; Male ; Female ; Proton Magnetic Resonance Spectroscopy ; Choline/metabolism* ; Aged ; Middle Aged

BACKGROUND:Currently,the mandibular joint prosthesis manufactured at home and abroad needs to rely on screws to fix the condylar part of the prosthesis during the replacement process,and the retention hole is reserved to facilitate the operation during the operation.However,due to the lack of personalized jaw design,the reattachment plate may not fit the jaw,resulting in screw loosening and dislocation.Therefore,personalized condylar prosthesis replacement is of great value in the repair of the temporomandibular joint.OBJECTIVE:To design a personalized condylar prosthesis with an internal GYROID for mandibular condylar repair and reconstruction.METHODS:The GYROID structure was selected in the Rhinoceros 7 software with the single cell size of 6 mm and the wall thickness of 0.2,0.3,0.4,0.5,0.6,0.7,0.8 mm.The mechanical properties of the GYROID structure were analyzed by finite element method.3D printing of GYROID structural test specimens with different wall thickness(0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was performed to test the mechanical properties of the specimens through room temperature compression experiments.A wall thickness value conforming to the range of mandibular mechanical properties was selected through finite element analysis and room temperature compression test results.An adult male mandibular CT data were used for inverse modeling to design a condylar prosthesis with an internal GYROID.Finite element analysis was used to simulate the movement of the apical staggered position and the opposite-blade jaw position after condylar prosthesis replacement.RESULTS AND CONCLUSION:(1)The results of finite element analysis and room temperature compression experiment showed that the elastic modulus of the GYROID structure increased with the increase of wall thickness.The elastic modulus of the GYROID structure with wall thickness of 0.5-0.7 mm was within the range of the elastic modulus of the mandible(1.5-4.0 GPa).Therefore,the 6 mm monocellular GYROID structural model with a wall thickness of 0.6 mm was selected for the design of the condylar prosthesis.(2)The results of finite element analysis showed that the stress distribution of mandibular model was symmetrical.The stress distribution of the two types of occlusion was roughly the same,and the stress peak was not significantly different.The stress concentrated in the neck of the condylar prosthesis,and the stress on the replacement side was slightly larger than that on the healthy side.The maximum equivalent stress of the whole internal fixation model was 269.34 MPa,and the maximum equivalent stress of the screw was 20.14 MPa.The equivalent stress and equivalent strain values of the prosthesis were greater than that of the opposite edge jaw position when the tooth tip was interlaced.The equivalent stress and equivalent strain values of the screw were smaller than that of the opposite edge jaw position when the tooth tip was interlaced.(3)The results showed that the design and retention of the personalized GYROID condylar prosthesis were good,which was consistent with the mechanical conduction of the mandible.

Objective To compare TyG index between the patients with CHF and ADHF to eluci-date the metabolic difference between these two stages.Methods A total of 1156 HF patients ad-mitted in Taizhou People's Hospital between January 2020 and December 2022 were enrolled,and according to 2021 ESC Guidelines for Diagnosis and Treatment of Acute and Chronic Heart Fail-ure,they were divided into CHF group(365 cases)and ADHF group(791 cases).The clinical da-ta,results of laboratory tests,and cardiovascular history were collected,and TyG index was calcu-lated.All-cause death outcome was observed in ADHF patients during a follow-up of 1 year.Results The TyG index was significantly lower in the ADHF group than the CHF group[8.27(7.99,8.62)vs 8.35(8.04,8.75),P=0.001].In the ADHF group,the TyG index was positively correlated with SBP,DBP,TC,TG,LDL-C,FPG,HbA1c,BMI,and LVEF,and negatively with age(P＜0.01).In the CHF group,the index was positively correlated with DBP,TC,TG,LDL-C,FPG,BMI,and HbA1c,and negatively with age(P＜0.05,P＜0.01).Both univariate and multiva-riate logistic regression analyses indicated that the TyG index was a protective factor for ADHF(OR=0.647,95％CI:0.503～0.832,P=0.001;OR=0.694,95％CI:0.536～0.898,P=0.005).Multivariate logistic regression analysis showed that the index in ADHF patients was a protective factor for one-year all-cause mortality(OR=0.483,95％CI:0.254-0.916;P=0.026).Conclusion TyG index might be regarded as an important marker for assessing the metabolic status in HF patients and predicting the prognosis in ADHF patients.

BACKGROUND:Condylar prosthesis replacement,as one of the surgical methods for the treatment of temporomandibular joint diseases,not only needs to restore the morphology and function,but also needs to ensure long-term stable application.OBJECTIVE:To design finite element analysis of a customized Gyroid condylar prosthesis.METHODS:Gyroid structure specimens with different wall thicknesses(250,350,450,550,650,and 750 μm)were designed by software.Finite element simulation compression experiments were carried out to test the elastic modulus of the specimens.The Gyroid structure wall thickness range that matches the elastic modulus of mandibular cancellous bone and whose pore size meets the osteogenesis conditions was screened out.This range was subdivided and Gyroid structure specimens were made using 3D printing technology.Mechanical compression experiments were carried out on a universal testing machine.The Gyroid structure wall thickness that meets the mechanical properties of mandibular bone,has an easier osteogenesis and a smaller strength was screened out by elastic modulus and compressive strength,and subsequent experiments were carried out.A three-dimensional model of a customized Gyroid condylar prosthesis was designed,and the finite element analysis of the blade jaw position and cusp interdigitation position of the model under natural occlusion was simulated.RESULTS AND CONCLUSION:(1)Finite element analysis results showed that with the increase of wall thickness,the elastic modulus of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 350,450,550,650,and 750 μm matched the elastic modulus of mandibular cancellous bone.Since the subsequent experiments needed to be subdivided into groups and the pore size of the 550,650,and 750 μm wall thickness group(pore size 800-1 000 μm)was within the osteogenesis range.Gyroid structure specimens with wall thickness of 550,600,650,700,and 750μm were selected for mechanical compression experiments on a universal testing machine.(2)The results of mechanical compression experiments showed that with the increase of wall thickness,the elastic modulus and compressive strength of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 550,600,and 650 μm was within the elastic modulus of the mandibular cancellous bone.Finally,the wall thickness of 650 μm and the pore size of 900 μm were selected to construct the three-dimensional model of the mandibular customized Gyroid condylar prosthesis.(3)The results of finite element analysis of three-dimensional model of the mandibular customized Gyroid condylar prosthesis showed that the stress of the articular disc in the edge-to-edge occlusion was mainly concentrated on the lower surface of the anterior middle band,and the stress of the articular disc in the interposition of tooth tips was mainly concentrated on the lateral surface of the lower surface.The maximum displacement and the maximum equivalent stress of the left and right articular discs in the edge-to-edge occlusion and the interposition of tooth tips were similar.The maximum displacement was 0.031,0.030,0.028,and 0.018 mm,and the maximum equivalent stress was 2.87,2.30,2.73,and 1.71 MPa,respectively.(4)The results showed that the Gyroid structure with a wall thickness of 650 μm was consistent with the mechanical properties of the mandible,which reduced the strength of the titanium alloy and reduced the damage of the articular disc caused by the customized Gyroid condylar prosthesis.

ObjectiveTo explore the therapeutic mechanism of Buchong Tiaojing prescription for rats with diminished ovarian reserve （DOR） from the perspectives of nucleotide-binding oligomerization domain （NOD）-like receptor protein 3 （NLRP3） inflammasome and ferroptosis. MethodsA total of 48 female SD rats were randomly divided into a normal group， a model group， low， medium， and high dose groups of Buchong Tiaojing prescription， and an MCC950 group， with eight rats in each group. Except the normal group， all the other groups were injected subcutaneously on the back of the neck with D-galactose to prepare the DOR rat model. From the 15th day of modeling， the rats in the low， medium， and high dose groups of Buchong Tiaojing prescription were subjected to gavage daily at doses of 14.4， 28.8， 57.6 g·kg^-1， respectively. Rats in the MCC950 group were injected intraperitoneally with MCC950 at a dose of 10 mg·kg^-1， once every other day. The interventions of all the groups lasted for 4 weeks. The estrous cycle of the rats was observed with vaginal exfoliated cell smear. Hematoxylin-eosin （HE） staining was performed to observe the development of follicles and corpus luteum in the ovary. Enzyme-linked immunosorbent assay （ELISA） was performed to detect the levels of serum sex hormones and interleukin-1β （IL-1β）. Real-time fluorescence quantitative polymerase chain reaction （Real-time PCR） and Western blot assay were performed to detect the mRNA and protein expression of NLRP3 inflammasome， acyl-CoA synthetase long-chain family member 4 （ACSL4）， transferrin receptor 1 （TFR1）， and glutathione peroxidase 4 （GPX4）， and oxidative stress kits were used to detect ovarian superoxide dismutase （SOD） and malondialdehyde （MDA） levels. ResultsDuring the experiment， one rat died in the high dose group of Buchong Tiaojing prescription， and a total of 47 rats were finally included in the index tests and statistics. Compared with those in the normal group， rats in the model group had significantly disturbed estrous cycles， increased number of atretic follicles， and significant disorder of serum sex hormones. The mRNA and protein expression of NLRP3 inflammasome， ACSL4， and TFR1 in ovarian tissue was up-regulated （P<0.01）， while that of GPX4 was significantly down-regulated （P<0.01）. The SOD content in the ovary was decreased significantly， while the MDA level was increased （P<0.01）. After drug intervention， the estrous cycle of rats was basically resumed， and the follicles at all levels were more structurally intact and significantly increased in number. Additionally， the levels of serum sex hormones and IL-1β were significantly improved. The mRNA and protein expression of NLRP3 inflammasome， ACSL4， and TFR1 were down-regulated， while that of GPX4 was significantly up-regulated， and the ovarian oxidative stress was alleviated （P<0.05， P<0.01）， especially in the high dose group of Buchong Tiaojing prescription and the MCC950 group. ConclusionInflammatory injury and ferroptosis occur in the ovaries of DOR rats， and the Buchong Tiaojing prescription is able to inhibit ovarian NLRP3 inflammasome， alleviate the degree of ovarian ferroptosis， and improve ovarian reserve.