ObjectiveTo establish an ultra-performance liquid fingerprint and multi-components determination method for Naomaili granules. To evaluate the quality of different batches by chemometrics， and the anti-neuroinflammatory effects of water extract and main components of Naomaili granules were tested in vitro. MethodsThe similarity and common peaks of 27 batches of Naomaili granules were evaluated by using Ultra performance liquid chromatography （UPLC） fingerprint detection. Ultra-performance liquid chromatography-tandem mass spectrometry （UPLC-MS/MS） technology was used to determine the content of the index components in Naomaili granules and to evaluate the quality of different batches of Naomaili granules by chemometrics. LPS-induced BV-2 cell inflammation model was used to investigate the anti-neuroinflammatory effects of the water extract and main components of Naomaili granules. ResultsThe similarity of fingerprints of 27 batches of samples was > 0.90. A total of 32 common peaks were calibrated， and 23 of them were identified and assigned. In 27 batches of Naomaili granules， the mass fractions of 14 components that were stachydrine hydrochloride， leonurine hydrochloride， calycosin-7-O-glucoside， calycosin，tanshinoneⅠ， cryptotanshinone， tanshinoneⅡ_A， ginsenoside Rb₁， notoginsenoside R₁， ginsenoside Rg₁， paeoniflorin， albiflorin， lactiflorin， and salvianolic acid B were found to be 2.902-3.498， 0.233-0.343， 0.111-0.301， 0.07-0.152， 0.136-0.228， 0.195-0.390， 0.324-0.482， 1.056-1.435， 0.271-0.397， 1.318-1.649， 3.038-4.059， 2.263-3.455， 0.152-0.232， 2.931-3.991 mg∙g^-1， respectively. Multivariate statistical analysis showed that paeoniflorin， ginsenoside Rg₁， ginsenoside Rb₁ and staphylline hydrochloride were quality difference markers to control the stability of the preparation. The results of bioactive experiment showed that the water extract of Naomaili granules and the eight main components with high content in the prescription had a dose-dependent inhibitory effect on the release of NO in the cell supernatant. Among them， salvianolic acid B and ginsenoside Rb₁ had strong anti-inflammatory activity， with IC₅₀ values of （36.11±0.15） mg∙L^-1 and （27.24±0.54） mg∙L^-1， respectively. ConclusionThe quality evaluation method of Naomaili granules established in this study was accurate and reproducible. Four quality difference markers were screened out， and eight key pharmacodynamic substances of Naomaili granules against neuroinflammation were screened out by in vitro cell experiments.

Objective: To analyze the epidemiological characteristics of category C intestinal infectious diseases among children and adolescents in Shenzhen from 2012 to 2024 and the association with meteorological factors, so as to provide a scientific basis for the targeted prevention and control of infectious diseases for children and adolescents. Methods: Using data from the "Infectious Disease Reporting Information Management System" of the "China Disease Prevention and Control Information System" covering the period from January 1, 2012 to December 31, 2024, the study analyzed clinical and confirmed cases of hand, foot, and mouth disease, other infectious diarrhea, and acute hemorrhagic conjunctivitis among individuals aged 6-19 years old to describe demographic and temporal characteristics. It used Joinpoint regression to calculate the average annual percent change (AAPC) and annual percent change (APC) to analyze incidence trends, and Spearman s correlation was combined to generalize linear models so as to assess the association between category C intestinal infectious diseases and meteorological factors. Results: From 2012 to 2024, a cumulative total of 61 019 cases of hand, foot, and mouth disease among children and adolescents, 58 498 cases of other infectious diarrhea, and 6 377 cases of acute hemorrhagic conjunctivitis were reported. The AAPC in the incidence rates of these three diseases was 19.19%, 31.03% and 31.48 %, respectively(all P <0.05). Notably, the incidence of hand, foot, and mouth disease increased significantly after 2022 (APC= 133.66 %, P <0.01). The temporal distribution showed that hand,foot,and mouth disease was most prevalent in May,June and July (seasonal index of 2.39,3.64,1.97), other infectious diarrhea was most prevalent in February,March and December (seasonal index of 1.22,1.25,1.47), and acute hemorrhagic conjunctivitis peaked in September and October (seasonal index of 4.22,2.16). Monthly average temperature could increase the risk of hand,foot,and mouth disease( β = 0.18 ,95% CI =0.11-0.25); as monthly average wind speed increased, the incidence of other infectious diarrhea ( β =-0.86, 95% CI = -1.50 to -0.22) and acute hemorrhagic conjunctivitis ( β =-1.32, 95% CI =-2.60 to -0.05) both decreased (all P < 0.05 ). Conclusions Among children and adolescents in Shenzhen, category C intestinal infectious diseases remain prevalent throughout the year；the number of reported hand, foot, and mouth disease cases has shown an upward trend in recent years.Temperature and wind speed significantly affect the number of reported cases of three types with category C intestinal infectious diseases.

Asthma and cough variant asthma （CVA） are both chronic heterogeneous diseases characterized by airway microenvironment homeostasis disruption as their core pathological basis. In recent years， micro ribonucleic acid （miRNA）， as core post-transcriptional regulators， have been shown to finely modulate multiple critical signaling pathways， including Janus kinase/signal transducer and activator of transcription （JAK/STAT）， nuclear factor-κB （NF-κB）， transforming growth factor-β/Smad （TGF-β/Smad）， and phosphoinositide 3-kinase/protein kinase B （PI3K/Akt）， as well as various pathological processes such as airway epithelial barrier restoration， type 1 helper T cell（Th1）/Th2 immune balance， M1/M2 macrophage polarization， airway smooth muscle cell function， and airway hyperresponsiveness. miRNAs play a pivotal role in maintaining and disrupting airway microenvironment homeostasis. Based on recent Chinese and international literature， a logical framework centered on "airway microenvironment homeostasis disruption， miRNA regulation， and microenvironment restoration" was constructed. From the perspective of the airway microenvironment， the therapeutic roles of miRNA in asthma and CVA were systematically summarized， and the cascade regulatory mechanisms of miRNA throughout the entire disease course were elucidated. The hub miRNA was identified， and research progress on traditional Chinese medicine intervention strategies was explored. Furthermore， current clinical studies on RNA therapeutics and traditional Chinese medicine in achieving multi-target and multi-pathway integrated treatment by modulating miRNA were analyzed. The value of miRNA as biomarkers for diagnosis， phenotyping， and prognosis assessment， as well as the potential and application prospects of miRNA mimics and antagonists in precision therapy， were summarized， with the ultimate goal of advancing precision therapy for asthma and CVA.

ObjectiveTo investigate the material basis and mechanism of action of Tuoli Xiaodu San in treating ulcerative colitis （UC） by integrating transcriptomics， network pharmacology， and experimental validation. MethodsNetwork pharmacology was initially employed to screen the active components and potential mechanisms of Tuoli Xiaodu San for treating UC. A UC mouse model was established by dextran sulfate sodium （DSS） induction. The mice were divided into the following groups： normal， model， high-dose （11.3 g·kg^-1） Tuoli Xiaodu San， low-dose （5.7 g·kg^-1） Tuoli Xiaodu San， and positive control （mesalazine， 0.4 g·kg^-1）. Intragastric administration commenced on day 1 of modeling and continued for 7 consecutive days. The disease activity index （DAI） was assessed daily. Hematoxylin-eosin （HE） staining was used to observe colonic pathological changes. Serum levels of tumor necrosis factor-alpha （TNF-α）， interleukin-1 beta （IL-1β） and interleukin-6 （IL-6） were measured by enzyme-linked immunosorbent assay （ELISA）. Transcriptome sequencing was performed on mouse colonic tissues， and the results were integrated with network pharmacology findings for in-depth analysis of Tuoli Xiaodu San's potential mechanisms in treating UC. Finally， the expression of key genes and proteins in the identified signaling pathways were detected using Western blot and Real-time polymerase chain reaction （Real-time PCR）. ResultsThe combined analysis of network pharmacology and transcriptomics results showed that the multi-pathway network with phosphatidylinositol 3-kinase/protein kinase B （PI3K/Akt） signaling pathway as its core was the key mechanism of Tuoli Xiaodu San in the treatment of UC. Tuoli Xiaodu San administration significantly ameliorated weight loss， diarrhea， and bloody stools in UC mice， reduced the DAI scores （P<0.05， P<0.01）， lowered the colonic histopathological scores （P<0.01）， alleviated colon shortening （P<0.01）， and downregulated serum levels of TNF-α， IL-1β， and IL-6 （P<0.05， P<0.01）. Molecular biology experiments confirmed that Tuoli Xiaodu San significantly inhibited the mRNA and protein expression， as well as the phosphorylation levels， of PI3K， Akt， and p65 in colonic tissues （P<0.05， P<0.01）. ConclusionTuoli Xiaodu San can regulate the multi-pathway network with PI3K/Akt as its core through multi-component synergy， thereby reducing colonic inflammatory damage and exerting a therapeutic effect on UC.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

ObjectiveTo summarize the application experience of the "Three-Separation" model in the pre-service training of laboratory animal practitioners and scientifically evaluate its training effectiveness. MethodsA retrospective analysis was conducted on 8 009 practitioners who participated in pre-service training at the Fujian Provincial Laboratory Animal Training Base from January 2010 to December 2025. Among them, 1 250 trainees from January 2010 to December 2017 were included in the control group (traditional training model), and 6 759 trainees from January 2018 to December 2025 were included in the evaluation group ("Three-Separation" model, based on separating job requirements, differentiating exam content, and categorizing exam methods). Meanwhile, a questionnaire survey was conducted to evaluate training effectiveness, yielding 1 624 valid questionnaires (585 from the control group and 1 039 from the evaluation group). The "Three-Separation" model simultaneously optimized fee structures to improve affordability and inclusiveness. The comprehensive competencies and training satisfaction of the two groups after training were compared and analyzed using the independent sample t-test, χ² test, and Wilcoxon rank-sum test. ResultsThe overall satisfaction rate of the evaluation group was 92.49% (961/1 039), significantly higher than that of the control group (77.78%, 455/585), with a highly significant difference (χ²=72.50, P<0.001). The evaluation group showed a more favorable distribution of positive, neutral, and negative ratings in dimensions such as course pertinence, time flexibility, assessment rationality, and reasonableness of fees, and the positive rating rates were highly significantly higher than those in the control group (P<0.001). The comprehensive pass rate of the evaluation group (95.53%) was significantly higher than that of the control group (86.24%), with a highly significant difference (P<0.001). ConclusionThe scientific application of the "Three-Separation" model can accurately match the competency requirements of different positions, optimize the training and assessment system, reduce participation barriers by making training fees more affordable and accessible, effectively improve the comprehensive quality and training satisfaction of laboratory animal practitioners, achieve better teaching outcomes, and provide replicable and promotable practical references for the standardized upgrading of the training system in the laboratory animal industry and other industries.