Patients with inflammatory bowel disease (IBD) require long-term pharmacotherapy. Due to the wide variety of clinically available drugs, medication safety has become increasingly concerning. As an indispensable component of pharmaceutical formulations, drug excipients may induce various adverse reactions, including rash, allergic responses, and gastrointestinal discomfort, and may even lead to severe organic injury. However, they are often overlooked in clinical practice. Therefore, identifying and managing excipient-related adverse reactions is crucial for ensuring medication safety. To address this issue, this article systematically reviews common excipients in IBD therapeutics, the underlying mechanisms of excipient-induced adverse reactions, and corresponding management strategies, aiming to enhance clinicians' awareness of excipient-related issues, improve their ability to recognize and manage such reactions, and ultimately ensure patient safety.

Objective To explore the association between occupational exposure to cesium and sex hormone levels in male workers. Methods A total of 988 male workers involved in assembly work at an electric vehicle assembly plant in Guangdong Province were recruited via purposive sampling. Blood samples of the workers were collected, and blood cesium-133 (Cs-133) levels were determined using inductively coupled plasma-mass spectrometry. Serum levels of estradiol, testosterone, progesterone, follicle-stimulating hormone, luteinizing hormone, and prolactin were measured using chemiluminescence immunoassay. Multiple linear regression analysis was performed to explore the associations between blood Cs-133 and the six sex hormones in the male workers. Results The median blood Cs-133 level was 2.23 μg/L, with a detection rate of 100.0%. Multiple linear regression analysis showed that blood Cs-133 levels were negatively associated with serum estradiol levels (P<0.05), after adjusting for covariates including age, length of service, educational level, marital status, body mass index (BMI), annual household income, alcohol consumption, and smoking. There was no significant interaction between blood Cs-133 levels and age, smoking, alcohol consumption, or BMI in relation to serum estradiol (all P>0.05). Conclusion Occupational exposure to Cs-133 is negatively associated with serum estradiol levels in the male workers of electric vehicle assembly industry, suggesting that occupational cesium exposure may influence male sex hormone profiles.

Objective To investigate the impact of dietary protein intake on the prevalence of type 2 diabetes in adult residents, and to provide a reference for formulating diabetes prevention and control measures. Methods The research was based on cross-sectional survey data from the Nutrition and Health Follow-up Study of Chinese Residents in Chongqing (2021). Energy and nutrient intake was calculated in combination with the Chinese food composition table. Multivariate logistic regression was used to analyze the association between dietary protein and diabetes, and then restricted cubic spline regression (RCS) was used to analyze the dose-response relationship between dietary protein intake and the development of diabetes. Results Among the 1 415 adult residents, dietary intake of total protein, animal protein, and plant protein was 69.69g/d, 26.26g/d, and 43.43g/d, respectively. The ratio of protein to energy supply was 14.31%, and the prevalence of diabetes was 18.02%. Comparing with the residents in the first percentile of total dietary protein intake, the multivariable-adjusted odds ratios of those in the second and third percentile were 1.754 and 2.453 respectively. Comparing the residents in the third percentile with those in the first percentile, the multivariable-adjusted odds ratios of diabetes were 1.592 for protein energy supply ratio, and 1.558 for animal protein intake. Conclusion High protein intake, high protein energy supply ratio and high animal protein intake may increase the risk of diabetes, and different types of protein may have different effects on diabetes.

OBJECTIVE: To explore the early clinical outcomes of 3D printed individualised customised prostheses for in hip revision in patients with combined severe bone defects. METHODS: Twenty-two patients from January 2021 to May 2023 underwent hip revision using 3D printed personalised customised prostheses were retrospective analyzed, including 10 males and 12 females, age 28 to 78 with a mean of (58.9±12.8) years old. All of patients were combined with severe bone defects (Parprosky type Ⅲ). Among of them, 9 patients had periprosthetic infections and 13 patients had aseptic prosthesis loosening. All patients were treated with a 3D printed personalised prosthesis protocol, patients with the periprosthetic infection received a second stage revision after infection control. The operation time, preoperative waiting time, intraoperative and postoperative complications were recorded, and the clinical efficacy were evaluated at the final follow-up using the visual analogue scale (VAS) for pain, the Harris hip score. RESULTS: One patient was lost to follow-up and the remaining 21 patients were followed up for 10 to 15 with a mean of (12.91±1.44) months after surgery. All patients completed surgery as planned, with an operative time of 135 to 390 with a mean of (165.4±39.3) minutes and a preoperative waiting time of 7 to 16 with a mean of (10.5±3.3) days. Regarding patient complications:one patient had a severe intraoperative periprosthetic femoral fracture due to the combination of severe osteoporosis; one patient had an intraoperative greater trochanteric femur fracture. At the latest follow-up, all patients had good position of the custom-made prosthesis and no loosening of the prosthesis;all patients had good wound healing and no local redness or swelling. The total Harris score at the final follow-up (85.86±7.04) was significantly improved compared to the preoperative (44.86±2.36), P<0.001. The VAS at the last follow-up (2.19±0.87) was significantly improved compared with preoperative (7.41±0.96), P<0.001. CONCLUSION The clinical efficacy of 3D-printed personalised customised prosthesis in combined severe bone defect hip revision is satisfactory, but due to the increased preoperative waiting time of the patients and certain risks, certain indications should be mastered when applying in the clinic.
Humans ; Male ; Female ; Printing, Three-Dimensional ; Middle Aged ; Aged ; Adult ; Retrospective Studies ; Hip Prosthesis ; Arthroplasty, Replacement, Hip ; Reoperation ; Prosthesis Design ; Treatment Outcome

OBJECTIVE: Investigation on the clinical application of HURWA robot and Smith & Nephew Cori robot in total knee arthroplasty(TKA). METHODS: A retrospective analysis was performed on 84 patients with knee osteoarthritis who underwent robotic-assisted TKA (RATKA) between June 2023 and March 2025. According to the different robotic systems used, the patients were divided into the domestic HUARUN robotic-assisted total knee arthroplasty group (HRATKA group) and the Smith & Nephew Cori robotic-assisted total knee arthroplasty group (CRATKA group). There were 42 patients in the HRATKA group, including 16 males and 26 females; the age ranged from 56 to 73 years old, with an average of (64.70±8.30) years old;the body mass index (BMI) was (25.10±2.30) kg·m^-2;21 cases were on the right side and 21 cases on the left side;in terms of Kellgren-Lawrence(K-L) classification, there were 15 cases of Grade Ⅲ and 27 cases of Grade Ⅳ;the disease duration ranged from 3 to 25 years, with an average of (15.5±7.5) years. The CRATKA group also included 42 patients, with 14 males and 28 females;the age ranged from 58 to 74 years old, with an average of (65.60±7.50) years old;the BMI was (24.50±2.70) kg·m^-2; 20 cases were on the right side and 22 cases on the left side;regarding K-L classification, there were 11 cases of Grade Ⅲ and 31 cases of Grade Ⅳ;the disease duration ranged from 2 to 26 years, with an average of (16.5±8.8) years. Collect general data of all patients, including age, gender, height, weight, surgical site, K-L classification, incision length, and operation time. To evaluate prosthesis position, compare the frontal tibia component (FTC) angle, lateral femoral component (LFC) angle, lateral tibia component (LTC) angle, and frontal femoral component angle between the two groups of patients after surgery. Measure the deviation of the hip-knee-ankle (HKA) angle to assess lower limb alignment. Additionally, compare the following indicators between the two groups:Knee Society Score (KSS), Visual Analogue Scale (VAS) for pain, knee range of motion (ROM), hemoglobin (HB) level, hematocrit (HCT) level, complication rate, and in-hospital satisfaction. RESULTS: All patients successfully completed the surgery as scheduled, and all were followed up after the operation. The follow-up period ranged from 5 to 17 months with an average of (11.2±6.1) months. There were 4 cases of venous thrombosis in the HRATKA group and 3 cases in the CRATKA group;each group had 2 cases of wound exudation. No mechanical-related complications, pulmonary embolism, or other severe complications occurred. Comparison of the incision length and hospital stay between the HRATKA group and the CRATKA group showed no statistically significant difference (P>0.05). The operation time in the HRATKA group was (96.80±7.10) minutes, which was longer than that in the CRATKA group (90.10±8.80) minutes, and the difference was statistically significant (P<0.05). In the HRATKA group, the HKA angle was (178.93±1.11) degree, the FFC angle was (89.00±0.91)°, and the LFC angle was (7.31±2.17) degree;the corresponding values in the CRATKA group were (178.05±1.34)°, (87.88±1.74)°, and (10.60±2.84) degree respectively. The differences in these three indicators between the two groups were all statistically significant (P<0.05). However, there were no statistically significant differences in the FTC angle or LTC angle between the two groups (P>0.05). There was also no statistically significant difference in the total perioperative blood loss between the two groups (P>0.05). At 3 days after surgery, the VAS score for movement in the HRATKA group (5.95±1.45) points was higher than that in the CRATKA group (4.50±0.97) points, with a statistically significant difference (P<0.05);at 90 days after surgery, there was no statistically significant difference in the movement VAS score between the two groups (P>0.05). Additionally, no statistically significant differences were observed between the two groups in the KSS, ROM at 3 and 90 days after surgery, or satisfaction degree during hospitalization (all P>0.05). CONCLUSION The domestic HURWA robot demonstrates excellent performance in osteotomy efficiency and lower limb alignment recovery. The Smith & Nephew Cori robot has a significant advantage in soft tissue assessment and joint stability optimization. Both robotic systems offer high-quality surgical treatments that significantly improve short-term knee function.
Humans ; Male ; Female ; Arthroplasty, Replacement, Knee/instrumentation* ; Aged ; Middle Aged ; Retrospective Studies ; Robotic Surgical Procedures/methods* ; Osteoarthritis, Knee/surgery*

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

Stress is a critical inducer in the onset and progression of many chronic diseases. Prolonged or intense stress can disrupt the overall balance between the nervous, immune, and endocrine systems. The resulting biological signals may act on corresponding receptors in the cervical spine region, leading to adverse pathological changes. The vertebral artery and the surrounding muscular and connective tissues are influenced by biomechanical abnormalities and inflammatory cascades associated with cervical spondylosis of vertebral artery type (CSA), which promotes the release of various hormones. These hormones, through the neuroendocrine-immune system, affect the central nervous system, inducing or exacerbating negative emotional feedback and thereby establishing a "central-local-central" vicious cycle. This article explores the mechanisms underlying the impact of stress on the key CSA symptoms through the neuroendocrine-immune network (NEI) theory, providing a more comprehensive framework for targeted therapeutic interventions in CSA.
Humans ; Neurosecretory Systems/immunology* ; Spondylosis/etiology* ; Vertebral Artery/immunology* ; Stress, Psychological/complications* ; Chronic Disease

OBJECTIVES: To investigate the application value of thromboelastography (TEG) in assessing coagulation function in children with severe hemophilia A (HA) after emicizumab (EMI) therapy. METHODS: A retrospective analysis was performed on the activated partial thromboplastin time (APTT) and TEG testing results of 17 children with severe HA before and after EMI treatment at Shenzhen Children's Hospital from January 2023 to July 2024. Correlation analysis was conducted between coagulation factor VIII (FVIII) equivalent activity and reaction time (R value) measured by TEG. RESULTS: After EMI treatment, the mean bleeding rate for children with severe HA was 1.6 events per year, with 15 children (88%) without spontaneous bleeding or joint bleeding. The children with severe HA showed a significant reduction in APTT after EMI treatment (P<0.05), with a significantly shorter APTT than the normal control group (P<0.05). There was no correlation between APTT and FVIII equivalent activity after treatment (P>0.05). After EMI treatment, TEG parameters, including R value, kinetic time, alpha angle (α), maximum amplitude, clot strength, and coagulation index, shifted from a hypocoagulable state before treatment to a nearly normal state after treatment (P<0.05). The R value demonstrated a strong negative correlation with FVIII equivalent activity (r=-0.758, P<0.05). CONCLUSIONS The bleeding condition of children with severe HA can be effectively controlled after EMI treatment. Routine APTT testing cannot reflect true coagulation function, whereas TEG testing is clinically valuable in assessing the coagulation function of children with severe HA undergoing EMI treatment.
Humans ; Thrombelastography ; Hemophilia A/physiopathology* ; Male ; Child ; Antibodies, Bispecific/therapeutic use* ; Antibodies, Monoclonal, Humanized/therapeutic use* ; Blood Coagulation/drug effects* ; Child, Preschool ; Retrospective Studies ; Female ; Partial Thromboplastin Time ; Adolescent ; Infant

OBJECTIVE: To analyze the B_el subtype gene mutation and its genetic mechanism in a family line. METHODS: ABO blood groups were identified by serologic tests. ABO genotyping was performed by polymerase chain reaction with sequence-specific primer (PCR-SSP). Sanger sequencing was performed on exons 1-7 of the ABO gene, the flanking intronic region, and exon 7 of the single strand of the gene confirmed the mutation site location. Missense3D software was used to predict the protein structure alteration caused by this mutation. RESULTS: Conventional serologic tests failed to detect erythrocyte B antigen in the proband and her three family members, and only trace amounts of B antigen expression could be detected by the absorption-dispersal test. DNA analysis showed that, on the basis of the normal ABO gene, there was a G>T substitution in the position of exon 7, position 803, which resulted in the change of amino acid 268 from Gly to Val. Further single-stranded sequencing analysis showed that the mutation site was located in the B gene. CONCLUSION In this family line, the proband, her father, her son, and her daughter all have reduced B type glycosyltransferase activity due to the new point mutation (c.803G>T) in exon 7 of the B gene, and the B antigen can only be detected by the absorption-dispersal method, and the point mutation can be stably inherited by offspring.
Point Mutation ; Alleles ; ABO Blood-Group System/genetics* ; Exons ; Introns ; Genotype ; Humans ; Male ; Female ; Glycosyltransferases/genetics*

OBJECTIVE: To detect the alleles of 12 blood group systems (Rh, MNS, Duffy, Kidd, Kell, Diego, Dombrock, Yt, Colton, Scianna, Lutheran and Lw) of Dongxiang ethnic group in Gansu province, and understand the characteristics of rare blood group alleles common in Dongxiang ethnic group, in order to provide a basis for safe blood transfusion and the establishment of blood group gene bank. METHODS: The alleles of 12 blood group systems were classified by polymerase chain reaction (PCR) in 100 people from Dongxiang ethnic group in Gansu province, and the differences of gene frequency compared to other areas in China were analyzed. RESULTS: The allele frequencies of Rh, MNS, and Dombrock blood group systems of Dongxiang ethnic group in Gansu province were similar to northern regions. The Duffy blood group system exhibited specificity, with frequencies lower than most southern regions as well as northern regions. There were no significant differences in Kidd, Kell and Diego blood group systems compared to other regions in China. The Lu^a gene frequency of Lutheran blood group system was higher than all regions in China, which might be associated with genetic variation or sample selection and size. Yt, Colton, Scianna and Lw blood group genes showed monomorphic distribution, and the genotypes were Yt^aYt^a, Co^aCo^a, Sc1Sc1 and Lw^aLw^a, respectively. CONCLUSION Rh, MNS, Duffy, Kidd, Kell, Diego, Dombrock and Lutheran blood group systems show polymorphic distribution, while Yt, Colton, Scianna and Lw blood group systems show monomorphic distribution. The distribution of blood group genes among Dongxiang ethnic group in Gansu province has its own specificity.
Humans ; China/ethnology* ; Polymorphism, Genetic ; Blood Group Antigens/genetics* ; Gene Frequency ; Alleles ; Asian People/genetics* ; Ethnicity/genetics* ; Genotype ; Female