BACKGROUND:How to effectively promote bone regeneration and bone reconstruction after bone injury has always been a key issue in clinical bone repair research.The use of biological and degradable materials loaded with bioactive factors to treat bone defects has excellent application prospects in bone repair. OBJECTIVE:To investigate the effect of polylactic acid-glycolic acid copolymer(PLGA)composite scaffold modified by lysine-grafted graphene oxide nanoparticles(LGA-g-GO)on osteogenic differentiation and new bone formation. METHODS:PLGA was dissolved in dichloromethane and PLGA scaffold was prepared by solvent evaporation method.PLGA/GO composite scaffolds were prepared by dispersing graphene oxide uniformly in PLGA solution.LGA-g-GO nanoparticles were prepared by chemical grafting method,and the PLGA/LGA-g-GO composite scaffolds were constructed by blending LGA-g-GO nanoparticles at different mass ratios(1%,2%,and 3%)with PLGA.The micromorphology,hydrophilicity,and protein adsorption capacity of scaffolds of five groups were characterized.MC3T3 cells were inoculated on the surface of scaffolds of five groups to detect cell proliferation and osteogenic differentiation. RESULTS AND CONCLUSION:(1)The surface of PLGA scaffolds was smooth and flat under scanning electron microscope,while the surface of the other four scaffolds was rough.The surface roughness of the composite scaffolds increased with the increase of the addition of LGA-g-GO nanoparticles.The water contact angle of PLGA/LGA-g-GO(3%)composite scaffolds was lower than that of the other four groups(P<0.05).The protein adsorption capacity of PLGA/LGA-g-GO(1%,2%,and 3%)composite scaffolds was stronger than PLGA and PLGA/GO scaffolds(P<0.05).(2)CCK-8 assay showed that PLGA/LGA-g-GO(2%,3%)composite scaffold could promote the proliferation of MC3T3 cells.Alkaline phosphatase staining and alizarin red staining showed that the cell alkaline phosphatase activity in PLGA/LGA-g-GO(2%,3%)group was higher than that in the other three groups(P<0.05).The calcium deposition in the PLGA/GO and PLGA/LGA-g-GO(1%,2%,and 3%)groups was higher than that in the PLGA group(P<0.05).(3)In summary,PLGA/LGA-g-GO composite scaffold can promote the proliferation and osteogenic differentiation of osteoblasts,and is conducive to bone regeneration and bone reconstruction after bone injury.

Objective To investigate the association between triglyceride glucose index(TyG)combined with waist circumference(WC)and the risk of new-onset coronary heart disease(CHD)in the middle-aged and elderly people in 10 years of non-interventional follow-up in Luzhou area.Methods A total of 8 647 eligible individu-als participated in epidemiological survey in Luzhou area were selected.The subjects were divided into different groups according to the quartiles of the TyG-WC and followed for ten years.The correlation between different TyG-WC quartile group and 10-year new CHD in middle-aged and elderly population was analyzed by using univariate analy-sis and Cox regression analysis.Results Of the 8 647 participants in the study,484 had new CHD,accounting for 5.5%.The comparison of the number of newly diagnosed CHD subjects grouped by TyG-WC quartiles indicated the 4th quartile group>the 3rd quartile group>the 2nd quartile group>the 1st quartile group,showing statistical significance(P<0.001).Cox regression analysis showed that without adjusting for any variables,the risk of new CHD in 10 years increased with the increase of TyG-WC quartile group,and the differences between the second,third and fourth quartile array and the first quartile array were statistically significant(P<0.05).After adjusting for age and sex and further adjusting for the influence of various influencing factors,the risk of new CHD in 10 years increased with the increase of TyG-WC quartile group.The difference between the third and fourth quartile array and the first quartile array was statistically significant(P<0.05).Conclusion TyG-WC is a risk factor for new-onset CHD in the middle-aged and elderly population in Luzhou area in 10 years of non-interventional follow-up,and TyG-WC may be a predictor of the risk of CHD in the middle-aged and elderly population.

Objective To investigate the incidence rate,clinical characteristics,and prognosis of neonatal stroke in Shenzhen,China.Methods Led by Shenzhen Children's Hospital,the Shenzhen Neonatal Data Collaboration Network organized 21 institutions to collect 36 cases of neonatal stroke from January 2020 to December 2022.The incidence,clinical characteristics,treatment,and prognosis of neonatal stroke in Shenzhen were analyzed.Results The incidence rate of neonatal stroke in 21 hospitals from 2020 to 2022 was 1/15 137,1/6 060,and 1/7 704,respectively.Ischemic stroke accounted for 75％(27/36);boys accounted for 64％(23/36).Among the 36 neonates,31(86％)had disease onset within 3 days after birth,and 19(53％)had convulsion as the initial presentation.Cerebral MRI showed that 22 neonates(61％)had left cerebral infarction and 13(36％)had basal ganglia infarction.Magnetic resonance angiography was performed for 12 neonates,among whom 9(75％)had involvement of the middle cerebral artery.Electroencephalography was performed for 29 neonates,with sharp waves in 21 neonates(72％)and seizures in 10 neonates(34％).Symptomatic/supportive treatment varied across different hospitals.Neonatal Behavioral Neurological Assessment was performed for 12 neonates(33％,12/36),with a mean score of(32±4)points.The prognosis of 27 neonates was followed up to around 12 months of age,with 44％(12/27)of the neonates having a good prognosis.Conclusions Ischemic stroke is the main type of neonatal stroke,often with convulsions as the initial presentation,involvement of the middle cerebral artery,sharp waves on electroencephalography,and a relatively low neurodevelopment score.Symptomatic/supportive treatment is the main treatment method,and some neonates tend to have a poor prognosis.

The COVID-19 epidemic has spread to the whole world for three years and has had a serious impact on human life, health and economic activities. China's epidemic prevention and control has gone through the following stages: emergency unconventional stage, emergency normalization stage, and the transitional stage from the emergency normalization to the "Category B infectious disease treated as Category B" normalization, and achieved a major and decisive victory. The designated hospitals for prevention and control of COVID-19 epidemic in Tianjin has successfully completed its tasks in all stages of epidemic prevention and control, and has accumulated valuable experience. This article summarizes the experience of constructing a hospital infection prevention and control system during the "Category B infectious disease treated as Category A" period in designated hospital. The experience is summarized as the "Cluster" hospital infection prevention and control system, namely "three rings" outside, middle and inside, "three districts" of green, orange and red, "three things" before, during and after the event, "two-day pre-purification" and "two-director system", and "one zone" management. In emergency situations, we adopt a simplified version of the cluster hospital infection prevention and control system. In emergency situations, a simplified version of the "Cluster" hospital infection prevention and control system can be adopted. This system has the following characteristics: firstly, the system emphasizes the characteristics of "cluster" and the overall management of key measures to avoid any shortcomings. The second, it emphasizes the transformation of infection control concepts to maximize the safety of medical services through infection control. The third, it emphasizes the optimization of the process. The prevention and control measures should be comprehensive and focused, while also preventing excessive use. The measures emphasize the use of the least resources to achieve the best infection control effect. The fourth, it emphasizes the quality control work of infection control, pays attention to the importance of the process, and advocates the concept of "system slimming, process fattening". Fifthly, it emphasizes that the future development depends on artificial intelligence, in order to improve the quality and efficiency of prevention and control to the greatest extent. Sixth, hospitals need to strengthen continuous training and retraining. We utilize diverse training methods, including artificial intelligence, to ensure that infection control policies and procedures are simple. We have established an evaluation and feedback mechanism to ensure that medical personnel are in an emergency state at all times.

Background/Aims: Low educational attainment is a well-established risk factor for nonalcoholic fatty liver disease (NAFLD) in developed areas. However, the association between educational attainment and the risk of NAFLD is less clear in China. Methods: A cross-sectional study including over 200,000 Chinese adults across mainland China was conducted. Information on education level and lifestyle factors were obtained through standard questionnaires, while NAFLD and advanced fibrosis were diagnosed using validated formulas. Outcomes included the risk of NAFLD in the general population and high probability of fibrosis among patients with NAFLD. Logistic regression analysis was employed to estimate the risk of NAFLD and fibrosis across education levels. A causal mediation model was used to explore the potential mediators. Results: Comparing with those receiving primary school education, the multi-adjusted odds ratios (95% confidence intervals) for NAFLD were 1.28 (1.16 to 1.41) for men and 0.94 (0.89 to 0.99) for women with college education after accounting for body mass index. When considering waist circumference, the odds ratios (95% CIs) were 0.94 (0.86 to 1.04) for men and 0.88 (0.80 to 0.97) for women, respectively. The proportions mediated by general and central obesity were 51.00% and 68.04% for men, while for women the proportions were 48.58% and 32.58%, respectively. Furthermore, NAFLD patients with lower educational attainment showed an incremental increased risk of advanced fibrosis in both genders. Conclusions In China, a low education level was associated with a higher risk of prevalent NAFLD in women, as well as high probability of fibrosis in both genders.

Periarticular fracture of the shoulder is a common type of fractures in the elderly. Postoperative adverse events such as internal fixation failure, humeral head ischemic necrosis and upper limb dysfunction occur frequently, which seriously endangers the exercise and health of the elderly. Compared with the fracture with normal bone mass, the osteoporotic periarticular fracture of the shoulder is complicated with slow healing and poor rehabilitation, so the clinical management becomes more difficult. At present, there is no targeted guideline or consensus for this type of fracture in China. In such context, experts from Youth Osteoporosis Group of Chinese Orthopedic Association, Orthopedic Expert Committee of Geriatrics Branch of Chinese Association of Gerontology and Geriatrics, Osteoporosis Group of Youth Committee of Chinese Association of Orthopedic Surgeons and Osteoporosis Committee of Shanghai Association of Chinese Integrative Medicine developed the Chinese expert consensus on the diagnosis and treatment of osteoporotic periarticular fracture of the shoulder in the elderly ( version 2023). Nine recommendations were put forward from the aspects of diagnosis, treatment strategies and rehabilitation of osteoporotic periarticular fracture of the shoulder, hoping to promote the standardized, systematic and personalized diagnosis and treatment concept and improve functional outcomes and quality of life in elderly patients with osteoporotic periarticular fracture of the shoulder.

Objective:To compare 3D-printing-assisted surgery and conventional surgery in the treatment of Schazker type Ⅵ tibial plateau fractures.Methods:A retrospective study was conducted to analyze the clinical data of 50 patients with type Ⅵ tibial plateau fracture who had been treated from January 2019 to December 2021 at the 5 Departments of Orthopedics in The First Affiliated Hospital of Nanchang University, The First People's Hospital of Jiujiang, Pingkuang General Hospital, Ganzhou People's Hospital, and Nanchang Hongdu Hospital of Traditional Chinese Medicine. The patients were divided into 2 groups according to their different treatment methods. In the 3D printing group of 25 cases treated by 3D-printing-assisted surgery, there were 14 males and 11 females, with an age of (42.5±9.1) years; in the conventional group of 25 cases treated by conventional surgery, there were 13 males and 12 females with an age of (42.2±9.3) years. The 2 groups were compared in terms of operation time, intraoperative blood loss, intraoperative fluoroscopy frequency, fracture healing time, postoperative complications, the Rasmussen radiological scores and the American Hospital for Special Surgery (HSS) knee function scores at 6 and 12 months after operation.Results:There was no significant difference in the preoperative general data between the 2 groups, indicating comparability ( P>0.05). The operation time [(125.4±10.6) min], intraoperative blood loss [(206.2±16.3) mL], intraoperative fluoroscopy frequency [(9.2±2.7) times] and fracture healing time [(3.0±0.7) months] in the 3D printing group were all significantly less than those in the conventional group [(168.2±14.1) min, (303.2±20.4) mL, (15.5±3.5) times and (4.1±0.8) months] while the Rasmussen radiological scores (17.6±1.2 and 17.9±0.6) and HSS knee scores (90.8±6.4 and 91.5±5.6) at 6 and 12 months after operation in the 3D printing group were all significantly higher than those in the conventional group (16.2±2.6 and 16.7±2.2; 84.5±9.2 and 87.6±8.0) (all P<0.05). In the 3D printing group, there were 1 case of wound infection and 1 case of wound dehiscence after operation. In the conventional group, there were 2 cases of wound skin necrosis, 3 cases of wound dehiscence, 1 case of traumatic arthritis, 2 cases of wound infection, and 1 case of screw loosening. The incidence of complications in the 3D printing group (8.0%, 2/28) was significantly lower than that in the conventional group (36.0%, 9/25) ( P<0.05). Conclusion:In the treatment of Schatzker type VI tibial plateau fractures, compared with conventional surgery, 3D-printing-assisted surgery can lead to better curative outcomes, because it is conducive to lowering surgical difficulty, reducing postoperative complications, and promoting fracture union and functional recovery of the knee.

Objective:To investigate the changes of thickness and area of the ligamentum flavum after lateral lumbar interbody fusion (LLIF) for lumbar degenerative diseases.Methods:From 2019 to 2021, a total of 54 patients with lumbar degenerative diseases who underwent LLIF combined with percutaneous pedicle screw internal fixation were retrospectively analyzed. There were 9 males and 45 females, aged 59.46±6.91 years (range, 45-76 years), followed up for 14.69±6.87 months (range, 12-33 months). The disc height (DH), midsagittal canal diameter (CD), dural sac axial cross-sectional area (DCSA), ligamentum flavum area (LFA) and ligamentum flavum thickness (LFT) before and after surgery and at the last follow-up were evaluated and compared. Pearson correlation analysis was used to assess the relationship between the amount of change in the DCSA and LFA in the immediate postoperative period and at the last follow-up, as well as the correlation between the two and the amount of change in the DH. The data of patients at the last follow-up of 12 months after operation were extracted. Pearson correlation was used to evaluate the changes in DCSA and LFA at the last follow-up and the visual analogue scale (VAS) of low back pain and leg pain and Oswestry disability index (ODI) at 1 year after surgery.Results:All patients were followed up for 14.69±6.87 months (range, 12-33 months). The differences in DH ( F=354.93, P<0.001), sagittal CD ( F=44.78, P<0.001) and DCSA ( F=130.97, P<0.001) before, immediately after surgery and at the last follow-up were statistically significant. The DH, sagittal CD, and DCSA immediate after surgery and last follow-up were higher than those before surgery ( P<0.05). The differences in LFA ( F=51.59, P<0.001) and bilateral LFT ( F=53.49, P<0.001; F=50.53, P<0.001) before and after surgery and at the last follow-up were statistically significant, and both LFA and bilateral LFT at immediate after surgery and last follow-up were smaller than those before surgery ( P<0.05). Pearson correlation analysis showed that the change of DH immediately after surgery was moderately correlated with the change of DCSA ( r=0.57, P<0.001), and was strongly correlated with the change of LFA ( r=0.65, P<0.001). The change of DH at the last follow-up was moderately correlated with the change of DCSA ( r=0.43, P<0.001), and was weakly correlated with the change of LFA ( r=0.25, P=0.042). The differences in VAS-leg ( F=199.51, P<0.001), VAS-low back ( F=233.90, P<0.001), and ODI ( F=199.17, P<0.001) were statistically significant in patients before operation, 3 months after operation and 12 months after operation. There was no correlation between the changes of DCSA and LFA at the last follow-up and the changes of VAS and ODI at 1 year after operation ( P>0.05). Conclusion:LFA and LFT decrease and DCSA increase in patients with lumbar degenerative diseases after LLIF. LFA and LFT gradually decrease with time, and VAS and ODI are significantly improved compared with those before surgery. The DH loss caused by a certain degree of cage subsidence after surgery does not affect the clinical efficacy. There is no correlation between the improvement of DCSA and LFA and the improvement of clinical symptoms.

Objective: To measure and analyze the shoulder circumferences of adults' permanent teeth crown preparations based on data collected through the intraoral scanning, so as to provide dental anatomy data for clinical diagnosis and analysis. Methods: Intraoral scanning data of 840 complete crown preparations were collected, and were entrusted to the World Dental Laboratory Co., Ltd. in Fuzhou between March 2021 and June 2022. Except the data of the third molar, the rest data were categorized in terms of 14 tooth positions in the upper and lower jaw (each category involved 30 samples from male group and 30 samples from female group). Image measurement software was used to measure the shoulder circumferences of permanent teeth crown preparations. And analysis was conducted to reveal the difference of shoulder circumference diameters between male and female groups. And then they were grouped according to the mean value at each tooth position, on the premise that the difference between the maximum and minimum values and the mean value of the entire group was≤±1.00 mm. Analysis were further conducted to determine the differences of shoulder circumference diameters between each dental position and the differences between male and female in the same groups. Results: Bivariate analysis of variance showed that gender had no effect on the shoulder circumference of full crown preparations (F=0.55, P=1.457), while tooth position had a significant impact on the shoulder circumference of full crown preparations (F=273.15, P<0.001). The samples were classified into 5 groups according to the mean values of shoulder circumference diameters relating to each tooth position. Statistical analysis showed that Group 1, covering maxillary lateral incisor, mandibular central incisor and mandibular lateral incisor, had shoulder circumference with diameters of (16.62±2.21) mm; Group 2, consisting of maxillary central incisor, maxillary cusp, mandibular cusp, mandibular first premolar and mandibular second premolar, had diameters of (20.78±2.48) mm; Group 3, consisting of maxillary first premolar and maxillary second premolar, had diamerters of (22.09±2.72) mm; Group 4, covering maxillary first molar, maxillary second molar and mandibular first molar, had diamerters of (30.21±2.67) mm; while group 5, with mandibular second molar alone its member, had diamerters of (31.34±3.18) mm. The difference among the 5 groups was statistically significant (P<0.05). Conclusions: Significant differences of shoulder circumference diameters could be found between different tooth positions, while at the same tooth position, the differences between male and female are not significant. The 14 tooth positions could be grouped into 5 groups according to their shoulder circumference diameters. Future research could take the grouping as reference.