BACKGROUND:Arthroscopic anchor repair has become the main treatment method for rotator cuff tears at present.Among them,the insertion status of the anchor is a key factor in the success or failure of the operation.However,currently,the impact of the insertion depth of the anchor on the stress of the bone tunnel and the anchor under different bone density conditions remains unclear.OBJECTIVE:To explore the stress distribution of the bone tunnel and the anchor when the insertion depth of the anchor varies under different bone density conditions by using three-dimensional finite element analysis technology.METHODS:The CT image data of the humerus of volunteers were collected,and the models of the humerus and the anchor were constructed by using Mimics,3-Matic,and Solidworks software.In 3-Matic,holes with distances of 0,2,4,6,and 8 mm from the surface of the humerus were respectively created at the same position of the humerus and assembled with the anchor.In Mimics,values were assigned based on the CT gray value to obtain a model with normal bone mass(T value ≥-1.0).The parameters were changed to construct models with reduced bone mass(-2.5＜T value＜-1.0)and osteoporosis(T value＜-2.5).In each model,a 70 N pulling force was applied to the anchor along the direction tangent to the inner edge of the bone tunnel.The stress distribution and magnitude of the bone tunnel and the anchor when inserted at different depths under different bone density conditions were observed.RESULTS AND CONCLUSION:(1)When the insertion depth was the same,as the bone density decreased,the maximum equivalent stress of the anchor increased,while the maximum equivalent stress of the bone tunnel decreased.(2)When the bone density was the same,as the insertion depth of the anchor increased,the maximum equivalent stress of the anchor decreased.When the insertion depth was 4 mm,the stress of the bone tunnel was the smallest and the distribution was relatively uniform.The stress of the anchor was mainly distributed around the lower anchor hole and the proximal thread,and the stress of the bone tunnel was mainly at the part in contact with the proximal thread.The increase in the insertion depth would change the uniformity and pattern of the stress distribution,while the bone density had a relatively small impact on the stress distribution pattern.(3)It is concluded that the bone density of the humerus is crucial for the anchor repair of rotator cuff tears.It is recommended that clinicians measure the bone density of the greater tuberosity of the humerus before the operation.Excessive insertion depth of the anchor does not significantly increase its stability.Clinicians can conduct personalized preoperative assessments by using the finite element analysis method in combination with the actual situation of patients to achieve the best surgical results.

BACKGROUND:Arthroscopic anchor repair has become the main treatment method for rotator cuff tears at present.Among them,the insertion status of the anchor is a key factor in the success or failure of the operation.However,currently,the impact of the insertion depth of the anchor on the stress of the bone tunnel and the anchor under different bone density conditions remains unclear.OBJECTIVE:To explore the stress distribution of the bone tunnel and the anchor when the insertion depth of the anchor varies under different bone density conditions by using three-dimensional finite element analysis technology.METHODS:The CT image data of the humerus of volunteers were collected,and the models of the humerus and the anchor were constructed by using Mimics,3-Matic,and Solidworks software.In 3-Matic,holes with distances of 0,2,4,6,and 8 mm from the surface of the humerus were respectively created at the same position of the humerus and assembled with the anchor.In Mimics,values were assigned based on the CT gray value to obtain a model with normal bone mass(T value ≥-1.0).The parameters were changed to construct models with reduced bone mass(-2.5＜T value＜-1.0)and osteoporosis(T value＜-2.5).In each model,a 70 N pulling force was applied to the anchor along the direction tangent to the inner edge of the bone tunnel.The stress distribution and magnitude of the bone tunnel and the anchor when inserted at different depths under different bone density conditions were observed.RESULTS AND CONCLUSION:(1)When the insertion depth was the same,as the bone density decreased,the maximum equivalent stress of the anchor increased,while the maximum equivalent stress of the bone tunnel decreased.(2)When the bone density was the same,as the insertion depth of the anchor increased,the maximum equivalent stress of the anchor decreased.When the insertion depth was 4 mm,the stress of the bone tunnel was the smallest and the distribution was relatively uniform.The stress of the anchor was mainly distributed around the lower anchor hole and the proximal thread,and the stress of the bone tunnel was mainly at the part in contact with the proximal thread.The increase in the insertion depth would change the uniformity and pattern of the stress distribution,while the bone density had a relatively small impact on the stress distribution pattern.(3)It is concluded that the bone density of the humerus is crucial for the anchor repair of rotator cuff tears.It is recommended that clinicians measure the bone density of the greater tuberosity of the humerus before the operation.Excessive insertion depth of the anchor does not significantly increase its stability.Clinicians can conduct personalized preoperative assessments by using the finite element analysis method in combination with the actual situation of patients to achieve the best surgical results.

ObjectiveTo analyze the epidemiological characteristics of a local dengue fever cluster outbreak in Qingpu District of Shanghai in 2024, and to provide a reference for subsequent dengue fever prevention and control. MethodsSeven confirmed local dengue fever cases reported through the National Notifiable Infectious Diseases Surveillance System in Qingpu District of Shanghai in 2024 were selected as the research subjects. Descriptive epidemiological methods were used to conduct investigation and analysis from the aspects of onset, medical treatment and reporting, clinical symptoms, travel and contact history within 15 days before onset, and activity trajectories. ResultsA total of 7 cases were identified in this outbreak. None of the cases had a travel history to dengue-endemic areas within 15 days prior to onset, while all had shared exposure environments and mosquito bite histories, indicating a local clustered transmission pattern. The main clinical manifestations included fever (100.00%) and myalgia (42.86%). All 7 cases were positive for dengue virus serotype 2 (DENV-2) by nucleic acid testing. Genetic sequencing showed that the virus strains belonged to the Cosmopolitan genotype and were most closely related to the epidemic DENV strains circulating in southern China in recent years. ConclusionThis outbreak might be a local secondary infection caused by the short-term stay of dengue fever-infected individuals, and the possible source of importation was dengue fever endemic areas in southern China.

ObjectiveTo investigate the effect of Sanet Vision Integrator (SVI)-based visuomotor integration training on the severity of neglect symptoms, upper limb motor function and activities of daily living (ADL) in patients with post-stroke unilateral spatial neglect (USN). MethodsFrom July, 2023 to September, 2025, 41 patients with post-stroke USN in Beijing Bo'ai Hospital were enrolled and randomly assigned to control group (n = 20) and experimental group (n = 21). Both groups received conventional rehabilitation and visual scanning training, while the experimental group received supplementary SVI-based visuomotor integration training, including saccadic, rotation and hand-eye coordination training, for eight weeks. They were assessed with Chinese Behavioral Inattention Test-Hong Kong version (CBIT-HK), Fugl-Meyer Assessment-Upper Extremities (FMA-UE) and modified Barthel Index (MBI) before and after treatment. ResultsAfter treatment, all the scores significantly improved in both groups (|t| > 4.004, P < 0.001), and the total scores of CBIT-HK and the core visual search sub-items (star cancellation, line crossing and letter cancellation), FMA-UE and MBI were better in the experimental group than in the control group (t > 2.096, P < 0.05). ConclusionSVI-based visuomotor training can effectively alleviate the USN symptoms, broaden the span of visual attention, facilitate the functional recovery of the affected upper extremity, and improve ADL in patients after stroke.

With the rapid advancement of artificial intelligence, deep learning-based multimodal data fusion technology has found increasing applications in the field of dental and stomatological diseases, and it has demonstrated great potential. This technology constructs deep neural networks to automatically extract and fuse features from multimodal data, such as clinical text information, medical imaging, intraoral and extraoral digital scanning records, and histopathological data. By fully leveraging the complementary information among these diverse data sources, it substantially enhances the accuracy of oral disease diagnosis, the rationality of treatment planning, and the reliability of prognosis prediction. This survey systematically explores the core advantages of deep learning in multimodal data fusion; outlines key main strategies, such as early fusion, intermediate fusion, and late fusion along with their applicable scenarios; and summarizes the specific applications and latest research progress of this technology in oral diseases, including oral cancer, periodontitis, dental caries, and temporomandibular disorders. We also highlight critical challenges in its clinical translation, such as complexity in multimodal data alignment, scarcity of high-quality annotated data, insufficient model interpretability, and privacy and security issues. In the future, this technology is expected to develop toward new learning paradigms, intelligentization, and adaptive fusion while integrating explainable artificial intelligence to enhance clinical credibility. Ultimately, large-scale, multicenter clinical validation systems will be required to ensure its safe and effective deployment in clinical practice.

Polycystic ovary syndrome （PCOS） is a common gynecological endocrine and reproductive disorder，with the main clinical manifestations including ovulation failure，insulin resistance，hyperandrogenism，and obesity. Its occurrence and development are closely related to cellular regulatory mechanisms such as apoptosis，autophagy，oxidative stress，and inflammatory response. Autophagy，as a clearance mechanism that maintains cellular homeostasis，plays a crucial role in maintaining the growth，development，and maturation of oocytes. Exploring the mechanism of autophagy during the occurrence and development of diseases can help develop treatment methods for PCOS by regulating autophagy. Studies have shown that autophagy plays an important role in the pathogenesis of PCOS，and it can affect the occurrence and development of PCOS through multiple pathways，levels，and targets. Traditional Chinese medicine （TCM） regulates autophagy in ovarian granulosa cells or endometrium of patients with PCOS by targeting the expression of autophagy signaling pathways，regulatory factors，and non-coding single-stranded RNA molecules，thereby alleviating inflammation，regulating metabolism disorders，and balancing hormone levels in PCOS. Accordingly，TCM can ameliorate pathological conditions such as insulin resistance，hyperandrogenism，and ovulation failure in PCOS. This article summarizes the TCM formulas and extracts for the treatment of PCOS，as well as the main autophagy pathways and regulatory factors involved，aiming to provide reference and suggestions for the future treatment of PCOS with TCM by regulating autophagy.

Objective:To explore the clinicopathological features and prognosis of double primary cancer of breast cancer and lung cancer.Methods:A total of 40 patients with breast cancer and lung cancer admitted to Beijing Friendship Hospital, Capital Medical University from December 2015 to December 2023 were retrospectively selected, and the clinicopathological characteristics and prognosis of patients with double primary cancer included in the study were analyzed. The count data were expressed as the number of cases and percentage, Chi-test was used for inter-group comparison or Fisher exact probability method was used for single frequency < 5, rank sum test was used for inter-group comparison of two-sample levels, and Kruskal-Walllis H test was used for inter-group comparison of three-sample levels. The survival rate and survival were analyzed by Kaplan-Meier method, and the survival curve was compared by Log-rank method. Results:Among the 40 patients, 50% were patients with simultaneous and metachronous double primary cancer. And there were statistically significant differences between the two groups in the number of lymph node metastases and whether to receive endocrine therapy ( P=0.025, 0.028). There were 32 patients firstly appear breast cancer, while 8 patients firstly appear lung cancer. And there were statistically significant differences in the body mass index and TNM stage of breast cancer between the two groups ( P=0.004, 0.015). The proportion of progesterone receptor positive patients with human epidermal growth factor receptor 2 low-expression in breast cancer was significantly higher than that in patients with HER2 non-expression and HER2 overexpression ( P=0.023). 92.5% of patients had lung adenocarcinoma, and 77.5% of patients were clinical stage I of lung cancer, and the overall survival of patients who received adjuvant therapy after lung cancer surgery was significantly lower than that of patients without adjuvant therapy, the difference was statistically significant ( P<0.001). Conclusion:The prognosis of patients receiving adjuvant therapy after lung cancer surgery is poor, and regular follow-up after breast cancer surgery is helpful for early detection and early treatment of lung cancer.

Objective:To analyze the transcriptomic features of breast cancer and its lymph node metastasis using single-cell RNA sequencing, to identify potential biomarkers for breast cancer.Methods:The GSE180286 single-cell RNA sequencing dataset was used to examine the transcriptomic characteristics of breast cancer and its lymph node metastasis. Following quality control, dimensionality reduction, clustering, and cell annotation of single-cell data, genes associated with breast cancer were identified. Dotplot, FeaturePlot, and other analytical methods were applied to investigate the expression profiles of target genes ( ALOX15B, FAAH, HDGF, KLF5, TLE3, TNS1) across different cell types and to assess their activity in immune and metabolic pathways. Statistical analysis was performed using the bilateral Student′s t-test. Results:ALOX15B, FAAH, HDGF, KLF5, TLE3, and TNS1 were differentially expressed across various cell types in breast cancer. ALOX15B was specifically expressed in macrophages and involved in immune responses, particularly with high activity in complement and inflammatory response pathways. HDGF was primarily expressed in epithelial cells and closely associated with breast cancer proliferation, migration, and angiogenesis. FAAH, KLF5, TLE3, and TNS1 were also closely related to the onset and progression of breast cancer. Co-expression analysis revealed relationships between these genes and breast cancer regulatory genes such as BRCA1 and BRCA2. Conclusions:This study identified 6 breast cancer-specific expressed potential biomarkers, and revealed their expression characteristics in different cell types and their differential activity in immune-metabolism-related pathways. These findings provide potential targets for understanding the molecular mechanisms of breast cancer and developing new therapeutic strategies.

BACKGROUND: Pulmonary arterial hypertension (PAH) presents a significant health burden in Asia and remains a critical challenge. This study aims to delineate the PAH burden in Asia from 1990 to 2021. METHODS: Using the latest data from the Global Burden of Disease 2021, we evaluated and analyzed the distributions and patterns of PAH disease burden among various age groups, sexes, regions, and countries in Asia. Additionally, we examined the associations between PAH disease burden and key health system indicators, including the socio-demographic index (SDI) and the universal health coverage (UHC) index. RESULTS: In 2021, there were 25,989 new PAH cases, 103,382 existing cases, 13,909 PAH-associated deaths, and 385,755 DALYs attributed to PAH in Asia, which accounted for approximately 60% of global PAH cases. The age-standardized rates (ASRs) for prevalence and deaths were 2.05 (95% uncertainty interval [UI]: 1.66-2.52) per 100,000 population and 0.31 (95% UI: 0.23-0.38) per 100,000 population, respectively. From 1990 to 2021, Asia reported the lowest ASRs for PAH prevalence but the highest ASRs for deaths compared to other continents. While the ASRs for prevalence increased slightly, ASRs for mortality and DALYs decreased over time. This increasing burden of PAH was primarily driven by population growth and aging. The burden was especially pronounced among individuals aged ≥60 years and <9 years, who collectively accounted for the majority of deaths and DALYs. Moreover, higher SDI and UHC levels were linked to reduced incidence, but higher prevalence rates. CONCLUSIONS Although progress has been made in reducing PAH-related mortality and DALYs, the disease continues to impose a substantial burden in Asia, particularly among older adults and young children. Region-specific health policies should focus on improving early diagnosis, expanding access to treatment, and effectively addressing the growing PAH burden in the region.
Humans ; Global Burden of Disease ; Male ; Female ; Middle Aged ; Adult ; Asia/epidemiology* ; Prevalence ; Aged ; Pulmonary Arterial Hypertension/mortality* ; Adolescent ; Young Adult ; Child ; Child, Preschool ; Infant ; Hypertension, Pulmonary/epidemiology*