BACKGROUND:Plate fixation is the mainstream method for the surgical treatment of distal femoral fractures.The intramedullary nailing has the advantages of minimally invasive,such as less soft tissue injury and bone blood supply destruction.At the same time,it is a central fixation and has better biomechanical effect.Therefore,retrograde intramedullary nailing has become another option for the internal fixation of distal femoral fractures.OBJECTIVE:The biomechanical characteristics of new retrograde intramedullary nail on lateral femur condyle,common femoral retrograde intramedullary nail,and lateral femur condyle anatomical locking plate for the treatment of A2-type distal femoral fractures were compared using finite element analysis,and the advantages of new retrograde intramedullary nail on lateral femur condyle was studied.METHODS:A new retrograde intramedullary nail on lateral femur condyle was designed,which was inserted into the bone cortex in front of the insertion point of the lateral collateral ligament of the lateral femoral condyle.A CT scan was performed on the lower limb bone of a male volunteer,and a three-dimensional model of the femur was established.The model was then segmented to create a three-dimensional model of a femoral distal A2-type fracture,The three-dimensional models of small(small group),standard type retrograde intramedullary nail on the lateral femoral condyle(standard group),common retrograde intramedullary needle(common group),and lateral femur condyle anatomical locking plate(plate group)were established respectively.The axial stresses of 600,1 800 N and the torsional load of 4 000,8 000 N·mm were applied to the models,and the displacement and stress of femur and the displacement,stress and shear force of internal fixators were observed in each group.RESULTS AND CONCLUSION:(1)When subjected to axial load of 600 and 1 800 N,the femoral peak displacement,the femoral peak stress,and the peak stress of interal fixation in the standard group were the lowest among the four groups.(2)When subjected to torsional load of 4 000 and 8 000 N·mm,the femoral peak displacement and peak displacement of the internal fixation in the standard group were the lowest among the four groups.(3)Compared with femoral lateral condylar locking plate and common retrograde intramedullary needle,the new retrograde intramedullary needle on lateral femur condyle has mechanical advantages of reducing stress concentration and decreasing the risk of internal fixation failure.

BACKGROUND:Arthroscopic anchor repair has become the main treatment method for rotator cuff tears at present.Among them,the insertion status of the anchor is a key factor in the success or failure of the operation.However,currently,the impact of the insertion depth of the anchor on the stress of the bone tunnel and the anchor under different bone density conditions remains unclear.OBJECTIVE:To explore the stress distribution of the bone tunnel and the anchor when the insertion depth of the anchor varies under different bone density conditions by using three-dimensional finite element analysis technology.METHODS:The CT image data of the humerus of volunteers were collected,and the models of the humerus and the anchor were constructed by using Mimics,3-Matic,and Solidworks software.In 3-Matic,holes with distances of 0,2,4,6,and 8 mm from the surface of the humerus were respectively created at the same position of the humerus and assembled with the anchor.In Mimics,values were assigned based on the CT gray value to obtain a model with normal bone mass(T value ≥-1.0).The parameters were changed to construct models with reduced bone mass(-2.5＜T value＜-1.0)and osteoporosis(T value＜-2.5).In each model,a 70 N pulling force was applied to the anchor along the direction tangent to the inner edge of the bone tunnel.The stress distribution and magnitude of the bone tunnel and the anchor when inserted at different depths under different bone density conditions were observed.RESULTS AND CONCLUSION:(1)When the insertion depth was the same,as the bone density decreased,the maximum equivalent stress of the anchor increased,while the maximum equivalent stress of the bone tunnel decreased.(2)When the bone density was the same,as the insertion depth of the anchor increased,the maximum equivalent stress of the anchor decreased.When the insertion depth was 4 mm,the stress of the bone tunnel was the smallest and the distribution was relatively uniform.The stress of the anchor was mainly distributed around the lower anchor hole and the proximal thread,and the stress of the bone tunnel was mainly at the part in contact with the proximal thread.The increase in the insertion depth would change the uniformity and pattern of the stress distribution,while the bone density had a relatively small impact on the stress distribution pattern.(3)It is concluded that the bone density of the humerus is crucial for the anchor repair of rotator cuff tears.It is recommended that clinicians measure the bone density of the greater tuberosity of the humerus before the operation.Excessive insertion depth of the anchor does not significantly increase its stability.Clinicians can conduct personalized preoperative assessments by using the finite element analysis method in combination with the actual situation of patients to achieve the best surgical results.

BACKGROUND:The femorofibular angle is a commonly used reference angle for mechanical axis correction in high tibial osteotomy on a single plane,but there has been no in-depth study on the application of this angle in high tibial osteotomy on a single plane.OBJECTIVE:To explore the application effect of the femorofibular angle as a reference for mechanical axis correction in high tibial osteotomy on a single plane.METHODS:A retrospective analysis was conducted on 64 cases of knee osteoarthritis patients who underwent high tibial osteotomy on a single plane at Third Affiliated Hospital of Beijing University of Chinese Medicine from January 2023 to January 2024.The patients were grouped according to the intraoperative mechanical axis correction reference method.The observation group consisted of 32 cases,which used the femorofibular angle as a reference for mechanical axis correction during surgery.The control group consisted of 32 cases,which used electrocautery line measurement as a reference for mechanical axis correction during surgery.Both groups received the same perioperative treatment and management.The lower limb mechanical axis ratio,hip-knee-ankle angle,proximal medial tibial angle,and femorofibular angle were recorded before and after surgery to assess changes in the lower limb mechanical state.The operation time and number of fluoroscopies were recorded.The visual analog scale score and Lysholm score for pain and knee function were recorded before surgery and at 1 and 3 months after surgery to evaluate changes in knee pain and function.RESULTS AND CONCLUSION:(1)All patients completed the treatment and follow-up,and no serious adverse events occurred.(2)Before surgery,there was no statistically significant difference in the lower limb mechanical axis ratio,proximal medial tibial angle,hip-knee-ankle angle,and femorofibular angle between the two groups(P＞0.05).At 3 months after surgery,the lower limb mechanical axis ratio,proximal medial tibial angle,hip-knee-ankle angle,and femorofibular angle were significantly improved in both groups compared to before surgery,with statistically significant differences(P＜0.05).There was no significant difference between the two groups(P＞0.05).(3)During surgery,the operation time and number of fluoroscopies in the observation group were less than those in the control group,with statistically significant differences(P＜0.05).(4)At each follow-up point before and after surgery,there was no statistically significant difference in the visual analog scale score and Lysholm score between the two groups(P＞0.05).With the passage of time after surgery,the visual analog scale score and Lysholm score in both groups were significantly improved compared to before surgery(P＜0.05).(5)It is suggested that the application of the femorofibular angle as a reference for mechanical axis correction in high tibial osteotomy on a single plane can accurately locate the range of lower limb mechanical axis correction,is simple and reliable,and reduces the number of fluoroscopies and operation time compared to traditional electrocautery line measurement.

BACKGROUND:In 2019,the modified cortical bone trajectory technique was proposed by our team,significantly improving traditional methods.Previous studies have highlighted its superior biomechanical properties for segment fixation.However,a comprehensive systematic analysis of its specific biomechanical effects on adjacent segment degeneration is lacking,particularly regarding its influence on range of motion and intervertebral disc stress in posterior lumbar interbody fusion and transforaminal lumbar interbody fusion techniques.OBJECTIVE:To investigate the biomechanical effects of modified cortical bone trajectory screw techniques on adjacent segment degeneration in posterior lumbar interbody fusion and transforaminal lumbar interbody fusion.METHODS:CT scans were performed on three human cadaver specimens to establish and validate three-dimensional intact finite element models of the L1-S1 segment.For each of these,the posterior lumbar interbody fusion or transforaminal lumbar interbody fusion with three different fixation techniques was reconstructed at the L4-L5 segment.The L4-L5 segment was fixed using three different internal fixation techniques(modified cortical bone trajectory,cortical bone trajectory,and traditional pedicle screws).The range of motion and von Mises stress of the intervertebral disc of the L3-L4 and L5-S1 segments were recorded with a 400 N compressive load and 7.5 N moments in flexion,extension,left-right bending,and left-right rotation.The impacts of the three internal fixation techniques on adjacent segment degeneration in the two kinds of fusion were compared and analyzed.RESULTS AND CONCLUSION:(1)In the posterior lumbar interbody fusion model,the modified cortical bone trajectory screw group showed a reduced range of motion on adjacent segments(L3-L4,L5-S1)under six loading conditions compared to both the cortical bone trajectory screw group and traditional bone trajectory screw group.Specifically,the modified cortical bone trajectory screw group significantly reduced the maximum stress on the intervertebral disc in the superior adjacent segment(L3-L4)during extension compared to the traditional bone trajectory screw group(P=0.005),while the stress on the intervertebral disc in the inferior adjacent segment(L5-S1)exhibited greater dispersion.Similarly,the cortical bone trajectory screw group also significantly reduced the maximum stress on the intervertebral disc in the superior adjacent segment(L3-L4)during extension compared with the traditional bone trajectory screw group(P=0.03).(2)Compared with transforaminal lumbar interbody fusion,the three internal fixation techniques(modified cortical bone trajectory,cortical bone trajectory,and traditional pedicle screws)showed a trend of reduced range of motion in the inferior adjacent segment(L5-S1)under six loading conditions.In contrast,the maximum stress on the intervertebral discs in both the superior and inferior adjacent segments(L3-L4,L5-S1)exhibited an increasing trend in the posterior lumbar interbody fusion model.(3)It is concluded that in the posterior lumbar interbody fusion model,the modified cortical bone trajectory screw exhibited superior biomechanical properties in reducing the range of motion at adjacent segments,which may have a beneficial effect on reducing the risk of adjacent segment degeneration.

BACKGROUND:As a mainstream surgical technique for the treatment of cervical spondylotic myelopathy through the anterior cervical subtotal decompression and bone graft fusion,it has many advantages.However,due to the high risk of this surgery and the particularity of the cervical anatomy,it is also a challenge for the surgeon.The gradual maturity of 3D printing technology and the continuous development of applications in the medical field are now able to provide more perfect personalized treatment.OBJECTIVE:To investigate the efficacy of 3D printed titanium cage cutting model in anterior cervical vertebrae subtotal decompression and bone graft fusion.METHODS:Medical records of 57 patients undergoing anterior cervical corpectomy decompression and fusion surgery admitted to the Department of Spine Surgery of Affiliated Hospital of Yan'an University from April 2021 to April 2023 were retrospectively analyzed.According to whether the 3D printed titanium cage cutting model was used in the operation,the patients were divided into the traditional titanium cage bone grafting group(control group,n=30)and the 3D printed titanium cage model group(observation group,n=27).The general data,amount of blood loss during operation,number ofC-arm X-ray machine fluoroscopy during operation,operation time,as well as anterior intervertebral edge height(H1),posterior intervertebral edge height(H2)and C2-C7 Cobb angle of the two groups measured on the cervical lateral X-ray films before,3 days and 6 months after operation were recorded and analyzed.The settling degree of the titanium cage was assessed with the distance of the height of the anterior and posterior edges of the vertebral body at 3 days and 6 months after surgery.Visual analog scale was used to evaluate neck pain and Japanese Orthopaedic Association was used to evaluate nerve function.RESULTS AND CONCLUSION:(1)Follow-up was conducted for at least 6 months.(2)The amount of intraoperative blood loss and fluoroscopy times in the observation group were less than those in the control group(P＜0.05).The operative time of the observation group was significantly shorter than that of the control group(P＜0.05).(3)There were no significant differences in C2-C7 Cobb angle,visual analog scale score,Japanese Orthopaedic Association score,anterior vertebral border height(H1)and posterior vertebral border height(H2)before surgery,3 days and 6 months after surgery between the two groups(P＞0.05).(4)There were five patients in the observation group(with severe subsidence rate of 19％)with severe subsidence at the anterior and posterior edges of the surgical segment,and seven patients in the control group(with severe subsidence rate of 23％)with severe subsidence(H1 or H2 subsidence≥3 mm)at the surgical segment 6 months after surgery.There was no significant difference in the rate of severe subsidence of titanium cage between the two groups(P＞0.05).(5)At the last follow-up,bone fusion was achieved at the operative level in both groups,and there was no statistical significance in bone graft fusion rate between the two groups(P＞0.05).(6)The results showed that the application of 3D printed titanium cage cutting model in anterior cervical corpectomy decompression and fusion surgery had the same clinical effect as that of traditional surgery,but the former could effectively reduce the fluoroscopy times of C-arm X-ray machine,the amount of blood loss and the operation time,and had unique advantages in the pruning and implantation of titanium cage during surgery.

BACKGROUND:The titanium alloy bone trabecular bone socket cup prosthesis printed by 3D technology has superior biological characteristics,which helps to promote osteogenic differentiation of stem cells.The Kidney Tonifying and Blood Activating Decoction has the functions of tonifying the kidneys,strengthening tendons,promoting blood circulation,and relieving pain.However,the application of the combination of the two in elderly hip arthroplasty is rarely reported.OBJECTIVE:To evaluate the application value and safety of 3D printed titanium alloy bone trabecular cup prosthesis combined with modified Kidney Tonifying and Blood Activating Decoction in elderly hip arthroplasty.METHODS:A total of 200 elderly patients who received hip arthroplasty in Cangzhou Hospital of Integrated Traditional Chinese and Western Medicine from January 2022 to January 2024 were selected and randomly divided into control group(n=100)and trial group(n=100).The control group underwent Pinnaele cup prosthesis hip arthroplasty combined with modified Kidney Tonifying and Blood Activating Decoction,while the trial group underwent 3D printed titanium alloy bone trabecular cup prosthesis hip arthroplasty combined with modified Kidney Tonifying and Blood Activating Decoction.The medication was taken continuously for 1 week before hip arthroplasty and for 4 weeks after arthroplasty.The differences in pain,swelling,hemorheology,inflammatory factors,bone metabolism,intra-articular stress,and hip abduction muscle strength were compared between the two groups to evaluate the clinical efficacy and safety of the two treatment options.RESULTS AND CONCLUSION:(1)Four weeks after surgery,the pain visual analog scale score,limb swelling,whole blood viscosity,and plasma viscosity of the trial group were lower than those of the control group(P＜0.05).The interleukin-6 level of the trial group was lower than that of the control group,and the interleukin-10 level was higher than that of the control group(P＜0.05).The levels of type Ⅰ collagen carboxyl terminal peptide β specific sequence and tartrate-resistant acid phosphatase 5b in the trial group were lower than those in the control group,while the levels of osteocalcin,bone-specific phosphatase and typeⅠ procollagen amino-terminal propeptide were higher than those in the control group(P＜0.05).The intra-articular stress and hip abduction muscle strength in the trial group were higher than that of the control group(P＜0.05).(2)Three months after surgery,the excellent and good treatment rate in the trial group was higher than that in the control group,and the incidence of safety evaluation events such as postoperative incision hematoma and infection was lower than that in the control group(P＜0.05).(3)It suggests that 3D printed titanium alloy trabecular acetabular cup prosthesis combined with modified Kidney Tonifying and Blood Activating Decoction can improve the blood rheology of elderly patients with hip arthroplasty,inhibit inflammatory response,reduce postoperative pain and swelling,and enhance bone metabolism,thereby promoting postoperative hip joint function recovery,and reducing the incidence of adverse events,with high safety.

BACKGROUND:The correlation between sacroiliac joint degeneration and lumbar degenerative disease has been analyzed in the literature in the past,but the clinical efficacy and imaging changes after interbody fusion with sacroiliac joint ankylosis in patients with lumbar degenerative disease have not been reported in the literature.OBJECTIVE:To investigate the effect of sacroiliac joint ankylosis on the clinical efficacy and lumbar sagittal regression after L5/S1 single-segment transforminal lumbar interbody fusion in patients with lumbar degenerative disease.METHODS:Thirty-seven patients who underwent L5/S1 segmental transforminal lumbar interbody fusion for lumbar degenerative disease with sacroiliac joint ankylosis between June 2020 and September 2023 in Affiliated Hospital of Xuzhou Medical University were retrospectively analyzed as group A.Thirty-seven patients with lumbar degenerative disease without sacroiliac joint ankylosis who were matched for general information during the same period were selected as controls in group B.Clinical efficacy was assessed using the Oswestry disability index and visual analog scale for lumbar and lower limb pain.The lumbar sagittal parameters included lumbar anterior convexity angle,lumbar partial anterior convexity angle,and lower lumbar anterior convexity angle.Pfirrmann grading was used to assess the degree of preoperative disc degeneration,postoperative endplate damage and screw loosening,and to record the fusion of the operated segments at the final postoperative follow-up visit.RESULTS AND CONCLUSION:(1)There was no statistically significant difference in age,body mass index,bone mineral density,operation time,intraoperative bleeding,preoperative primary diagnosis and postoperative follow-up time between the two groups(P＞0.05).(2)The preoperative Pfirrmann grading of lumbar disc degeneration in group A patients(3.4±0.9)was significantly higher than that of group B(3.1±0.6),and the difference was statistically significant(t=2.059,P=0.044).(3)All patients showed significant improvement in postoperative lumbar sagittal parameters compared with preoperative ones(all P＜0.05).During the follow-up period,there was a loss of correction in patients in group A.There was no statistical difference in the lumbar anterior convexity angle,lower lumbar anterior convexity angle,and local anterior convexity angle at the last follow-up compared with the preoperative period(P＞0.05).The lumbar anterior convexity angle,lower lumbar anterior convexity angle,and local anterior convexity angle in group A were significantly lower than those of group B patients at both preoperative and final follow-up,and the differences were statistically significant(all P＜0.05).(4)There was no statistically significant difference in postoperative endplate injury between the two groups(x2=0.181,P=0.670),and screw loosening was significantly higher in group A than in group B,with a statistically significant difference(x2=4.163,P=0.041).(5)At the last follow-up,the incidence of grade 3 fusion and grade 4 fusion was significantly higher in group A than in group B.The difference in the distribution of fusion grades between the two groups was statistically significant(x2=7.848,P=0.031).(6)The Oswestry disability index and lower limb visual analog scale scores at the last follow-up of both groups were significantly improved compared with the preoperative period(P＜0.05).The visual analog scale scores for low back pain at 3 months after surgery and at the last follow-up of group A were significantly higher than those of group B(t=2.010,P=0.048;t=2.133,P=0.036).(7)It is concluded that regardless of whether it is accompanied by sacroiliac joint ankylosis or not,lumbar degenerative disease patients who undergo interbody fusion with foramen magnum can achieve good therapeutic effects,but lumbar degenerative disease patients with sacroiliac joint ankylosis who undergo interbody fusion with foramen magnum at the L5/S1 segments have a poorer improvement of low back pain than patients without sacroiliac joint ankylosis after the operation.Furthermore,patients with preoperative sacroiliac ankylosis who underwent L5/S1 segmental transforminal lumbar interbody fusion had a low fusion rate and were prone to loss of correction of the lumbar sagittal position.

BACKGROUND:Due to the complex movement of the scapula,which is a six-degree-of-freedom activity in three-dimensional space,it is difficult to measure it accurately using traditional methods.The image and model matching technology based on dual-plane X-ray is a three-dimensional measurement method that has gradually developed and matured in recent years.Two high-speed cameras are used to project and shoot from orthogonal directions.Compared with a single perspective,this method has advantages in observation range and reduction of out-of-plane errors,and is suitable for the study of scapula kinematics.OBJECTIVE:X-ray biplane and image-model registration technology were used to explore the differences in scapular kinematics between normal individuals and patients with rotator cuff tears,providing a basis for the treatment and rehabilitation of rotator cuff tear patients.METHODS:From April 2023 to January 2024,10 patients with normal shoulders and 10 patients with rotator cuff tears who met the inclusion criteria were enrolled from Guanghua Hospital Affiliated to Shanghai University of Traditional Chinese Medicine.The subjects underwent a shoulder CT scan to create a 3D model and a local scapular coordinate system.X-ray biplane images were taken during shoulder abduction with two C-arm machines.The 2D and 3D images were registered to compare scapular kinematic differences between the two groups at 0°,15°,30°,45°,60°,75°,and 90° of abduction,including scapular rotation angle and displacement distance.RESULTS AND CONCLUSION:(1)During shoulder abduction,the scapula of both groups showed upward rotation,but the upward rotation of the rotator cuff tear group was greater than that of the control group,and the difference was significant when the abduction was 30°-90°(P＜0.01).At the same time,the scapula internal rotation of both groups gradually increased,but the rotator cuff tear group was significantly greater than the control group when the abduction was 45°-90°(P＜0.01).In addition,the anteroposterior tilt of the scapula of the two groups was significantly different when the abduction was 15°-90°(P＜0.01).The scapula posterior tilt of the control group gradually increased during abduction,while the scapula of the rotator cuff tear group tilted forward except for a slight posterior tilt at 15°-30° abduction.(2)In terms of displacement,the upward displacement of the rotator cuff tear group was less than that of the control group during abduction,and the difference was significant at 15°-90°(P＜0.05),but there was no significant difference in lateral and anterior-posterior displacement between the two groups(P＞0.05).(3)Rotator cuff tear can cause scapular dyskinesis,characterized by increased upward rotation,internal rotation,and abnormal forward tilt during shoulder abduction.Identifying and addressing scapular dyskinesis is crucial for treating rotator cuff tear.

BACKGROUND:Steroid-induced osteonecrosis of the femoral head(SANFH)is a severe orthopedic disease characterized by interruption of the blood supply to the femoral head and necrosis of subchondral bone,leading to joint dysfunction.Long-term use of glucocorticoids is the main cause of SANFH,and its pathogenesis involves multiple factors,including intravascular coagulation and osteocyte apoptosis.Vascular endothelial growth factor A(VEGF-A),as a key angiogenic factor,has potential value in the treatment of SANFH.OBJECTIVE:To summarize the mechanisms of action of VEGF-A in SANFH,including its progress in promoting angiogenesis,anti-apoptosis,and lipid metabolism regulation,and to discuss the prospects for clinical application of VEGF-A targeted therapy.METHODS:Literature related to VEGF-A targeted regulation of angiogenesis in the treatment of SANFH was identified through searches of PubMed,Web of Science,CNKI,and WanFang databases from database inception to November 2024.After quality assessment,71 articles were selected,data were extracted by independent researchers,and disagreements were resolved through group discussions.RESULTS AND CONCLUSION:(1)VEGF-A binds to its receptors VEGFR-1 and VEGFR-2,activating downstream signaling pathways that promote the proliferation,migration,and angiogenesis of endothelial cells.Therefore,it can promote the formation of collateral circulation and improve blood supply to the area of bone necrosis.(2)Reduced expression of VEGF-A may lead to a decrease in the number of blood vessels within bone tissue,exacerbating the ischemic state of the femoral head.Furthermore,VEGF-A has anti-apoptotic effects and reduce apoptosis in osteocytes and bone marrow cells,thus protecting bone tissue.(3)The role of VEGF-A in regulating lipid metabolism and inflammatory responses,as well as promoting the osteogenic differentiation of bone marrow mesenchymal stem cells,provides a new perspective for the treatment of SANFH.(4)The development of VEGF-A protein delivery systems,such as lipid nanoparticles and exosome-based delivery systems,offers new possibilities for the clinical application of VEGF-A.(5)The research progress of VEGF-A in SANFH treatment has laid a solid foundation for the development of new treatment strategies and has opened up new avenues for future research directions and clinical applications.(6)With further clarification of the mechanisms of action of VEGF-A and continuous advancements in delivery technologies,more effective treatments will be provided for SANFH patients,improving their prognosis.

BACKGROUND:Studies have shown that there is a close relationship between pyroptosis,inflammatory factors and osteoporosis.OBJECTIVE:To review the effects of pyroptosis and inflammatory factors on the pathogenesis of osteoporosis from the perspectives of osteogenic differentiation and osteoclastic differentiation,based on an overview of pyroptosis in relation to the interaction of relevant inflammatory factors.METHODS:The first author used the computer to search the literature published by each database until 2024,and searched CNKI,WanFang,VIP and PubMed databases with the search terms of"pyroptosis,inflammatory factors,osteoporosis,osteoblast,osteoclast,bone metabolism,signaling pathway,review"in Chinese and English.A total of 79 papers were finally included according to the inclusion criteria.RESULTS AND CONCLUSION:The progression of osteoporosis is closely related to inflammation,in which pyroptosis plays a key role.Immune cells induce pyroptosis through apoptosis pathway,promote the secretion of inflammatory factors such as interleukin-18,interleukin-1β and NLRP3,build an inflammatory immune microenvironment,and regulate bone metabolism through complex signaling pathways,resulting in enhanced bone absorption and reduced bone formation,thereby leading to osteoporosis.Previous studies have shown that inhibiting pyroptosis is anti-inflammatory and slows the progression of osteoporosis,and it has been shown to improve inflammatory bone loss in vitro and in animal models.At present,research on pyroptosis and osteoporosis is limited.On the one hand,the exact mechanism of osteoporosis and the pathogenesis of pyroptosis are unknown,and the specific pathways and regulatory mechanisms remain to be understood.On the other hand,therapeutic strategies targeting pyroptosis are still theoretical,not clinically proven,and drug side effects are unknown.In the future,the research focus is to further explore the pathogenesis,especially the mechanism of pyroptosis,identify potential therapeutic targets,further study the pyroptosis signaling pathway and Gasdermin protein,and develop new drugs to improve the therapeutic effect in patients with osteoporosis.