BACKGROUND: Indoor air quality (IAQ) is an important determinant of human health. In Japan, IAQ guidelines have been established for 13 chemicals since 1997. Regarding ethylbenzene (EB), a previous guideline value of 3800 µg/m³ was established in 2000. However, the Ministry of Health, Labour, and Welfare decided to revise the value because of the publication of new hazard information after the establishment of the previous guideline value and the establishment of their respective IAQ guidelines by foreign organizations based on the new hazard information. This study conducted a detailed hazard assessment on EB and derived hazard assessment values to provide a toxicologically valid basis for revising the IAQ guideline value. METHODS: As it was defined that the IAQ guidelines would not exert adverse health effects on humans even if they inhaled the chemicals from indoor air over a lifetime, we investigated the general toxicity, developmental and reproductive toxicity, genotoxicity, and carcinogenicity of EB based on reliable hazard information cited in published assessment documents by domestic, foreign, or international risk assessment organizations. All the collected hazard information was examined, and we originally judged the no-observed adverse effect level and the lowest observed adverse effect level of each toxicity study. We then selected the most appropriate key study, an endpoint, and a point of departure and derived the hazard assessment values for each toxicity category. Finally, we selected a representative hazard assessment value for EB from the minimum hazard assessment value among general toxicity, developmental and reproductive toxicity, and carcinogenicity. RESULTS: Among the three toxicity categories, the minimum hazard assessment value was obtained from general toxicity, which was 0.0858 ppm (370 µg/m³) based on the loss of the outer hair cells in the organ of Corti in the cochlea observed in a 13-week repeated-dose inhalation toxicity study using rats. CONCLUSIONS It would be appropriate to adopt 0.0858 ppm (370 µg/m³) as a representative hazard assessment value to provide a basis for revising the IAQ guideline value for EB.
Japan ; Air Pollution, Indoor/adverse effects* ; Risk Assessment ; Humans ; Benzene Derivatives/toxicity* ; Guidelines as Topic ; Animals ; Air Pollutants/toxicity*

OBJECTIVE: Exposure to polycyclic aromatic hydrocarbons (PAHs) or metal(loid)s individually has been associated with neural tube defects (NTDs). However, the impacts of PAH and metal(loid) co-exposure and potential interaction effects on NTD risk remain unclear. We conducted a case-control study in China among population with a high prevalence of NTDs to investigate the combined effects of PAH and metal(loid) exposures on the risk of NTD. METHODS: Cases included 80 women who gave birth to offspring with NTDs, whereas controls were 50 women who delivered infants with no congenital malformations. We analyzed the levels of placental PAHs using gas chromatography and mass spectrometry, PAH-DNA adducts with ³²P-post-labeling method, and metal(loid)s with an inductively coupled plasma mass spectrometer. Unconditional logistic regression was employed to estimate the associations between individual exposures and NTDs. Least absolute shrinkage and selection operator (LASSO) penalized regression models were used to select a subset of exposures, while additive interaction models were used to identify interaction effects. RESULTS: In the single-exposure models, we found that eight PAHs, PAH-DNA adducts, and 28 metal(loid)s were associated with NTDs. Pyrene, selenium, molybdenum, cadmium, uranium, and rubidium were selected through LASSO regression and were statistically associated with NTDs in the multiple-exposure models. Women with high levels of pyrene and molybdenum or pyrene and selenium exhibited significantly increased risk of having offspring with NTDs, indicating that these combinations may have synergistic effects on the risk of NTDs. CONCLUSION Our findings suggest that individual PAHs and metal(loid)s, as well as their interactions, may be associated with the risk of NTDs, which warrants further investigation.
Humans ; Neural Tube Defects/chemically induced* ; Polycyclic Aromatic Hydrocarbons/adverse effects* ; Female ; Case-Control Studies ; China/epidemiology* ; Adult ; Pregnancy ; Environmental Pollutants ; Maternal Exposure/adverse effects* ; Metals/toxicity* ; Young Adult ; Risk Factors

Humans ; Diabetes Mellitus, Type 2/epidemiology* ; Air Pollution/adverse effects* ; Air Pollutants/toxicity* ; Risk Assessment ; Particulate Matter ; Environmental Exposure

In this study, the content of five heavy metals(Pb, Cd, As, Hg, and Cu) in 59 batches of Lonicerae Japonicae Flos(LJF) medicinal materials and pieces were determined by inductively coupled plasma mass spectrometry(ICP-MS). The health risk assessment was processed using the maximum estimated daily intake(EDI), target hazard quotients(THQ), and carcinogenic risks(CR) assessment models. With reference to the limit standard for heavy metal content in LJF specified in 2020 edition of Chinese Pharmacopoeia, five batches produced in Hebei were found to contain excessive Pb, and the remaining 54 batches met the specifications, with the unqualified rate of 8.47%. Comparative analysis of heavy metal content in LJF samples from three different producing areas, namely Shandong, Henan, and Hebei showed that the levels of Pb, As, and Hg in LJF from Hebei were significantly higher than those from Henan and Shandong. The samples produced in Shandong contained the highest content of Cd. The samples from Hebei contained the highest content of Cu while those from Shandong had the lowest content of Cu. As demonstrated by health risk assessment based on the EDI, THQ and CR models, these 59 batches of LJF samples did not cause significant health hazards for the exposed population, and there was no potential non-carcinogenic or carcinogenic risk. In conclusion, a few of LJF samples contained excessive heavy metals, so some measures, including controlling production environment, cultivating management mode, and optimizing processing methods, should be taken for ensuring the medication safety of LJF.
Drugs, Chinese Herbal ; Environmental Pollution/analysis* ; Mercury/toxicity* ; Metals, Heavy/toxicity* ; Risk Assessment

The toxicity data of chemicals and drugs increases rapidly, while the animal experimental-based tests method could not meet the current demand of health risk assessment. The high-throughput screening techniques based on in vitro alternative models, integrating with computational methods and information technology to establish toxicity tests strategy promises to address this problem. High-content screening (HCS) technology uses automated microscopy and quantitative image platforms to perform multi-parameter and high-throughput phenotypic analysis via a visualization and quantification manner, and to quickly and effectively assess toxicity and prioritization of chemicals, which promotes the development of in vitro toxicity tests and computational toxicology. HCS technology has been included as an important tool for Toxicity Testing in the 21^st Century (Tox21) and chemical risk prioritization. Its applications have been widely utilized in the research field of toxicity tests and chemical toxicity mechanisms. In this review, we describe the development of HCS technology, technical points, toxicological applications, and the future directions and challenges of HCS, so as to provide references for the toxicity testing technology and risk assessment methodology.
Animals ; High-Throughput Screening Assays ; Research Design ; Risk Assessment ; Toxicity Tests

The ex vivo biosensor assay is developed to assess the health effects and toxicological mechanism of environmental pollutants with internal environment homeostasis changes by integrating the in vivo exposure evaluation, in vitro outcomes analysis, and systematic environment component screening. This toxicology testing model combines the real-world exposure of people in the field and the study of molecular mechanism exploration in lab experiments to overcome the shortcomings of a single toxicology method. It provides a new technique and perspective for toxicity testing and risk assessment in mesoscale between macroscopic population study and microscopic mechanism exploration.
Biosensing Techniques ; Environmental Pollutants/toxicity* ; Humans ; Risk Assessment ; Toxicity Tests

The purpose of this study was to investigate the NOAEL of the nickel ion and provide with basic data for the biological evaluation of those medical devices containing nickel. Five groups SD rats were repeatedly exposed during 14 d respectively to nickel at first stage doses of 4.9, 3.7, 2.5 mg/(kg.d), and the second stage doses of 1.2, 0.25 mg/(kg.d) by the intravenous route. The results showed that the NOAEL of nickel ion is 0.25 mg/(kg.d) for SD rats, and the result was verified by subchronic systemic toxicity test of nickel alloy. The threshold of toxicological concern (TTC) of nickel is 150 μg/d (based on application of 100-fold uncertainty factor and a body weight of 60 kg)deduced by these data.
Animals ; Equipment and Supplies/adverse effects* ; Nickel/toxicity* ; No-Observed-Adverse-Effect Level ; Rats ; Rats, Sprague-Dawley ; Risk Assessment

BACKGROUND: Traditional toxicological studies focus on individual compounds. However, this single-compound approach neglects the fact that the mixture exposed to human may act additively or synergistically to induce greater toxicity than the single compounds exposure due to their similarities in the mode of action and targets. Mixture effects can occur even when all mixture components are present at levels that individually do not produce observable effects. So the individual chemical effect thresholds do not necessarily protect against combination effects, an understanding of the rules governing the interactive effects in mixtures is needed. The aim of the study was to test and analyze the individual and combined estrogenic effects of a mixture of three endocrine disrupting chemicals (EDCs), bisphenol A (BPA), nonylphenol (NP) and diethylstilbestrol (DES) in immature rats with mathematical models. METHOD: In the present study, the data of individual estrogenic effects of BPA, NP and DES were obtained in uterotrophic bioassay respectively, the reference points for BPA, NP and DES were derived from the dose-response ralationship by using the traditional no observed adverse effect (NOAEL) or lowest observed adverse effect level (LOAEL) methods, and the benchmark dose (BMD) method. Then LOAEL values and the benchmark dose lower confidence limit (BMDL) of single EDCs as the dose design basis for the study of the combined action pattern. Mixed prediction models, the 3 × 2 factorial design model and the concentration addition (CA) model, were employed to analyze the combined estrogenic effect of the three EDCs. RESULTS: From the dose-response relationship of estrogenic effects of BPA, NP and DES in the model of the prepuberty rats, the BMDL(NOAEL) of the estrogenic effects of BPA, NP and DES were 90(120) mg/kg body weight, 6 mg/kg body weight and 0.10(0.25) μg/kg body weight, and the LOAEL of the the estrogenic effects of three EDCs were 240 mg/kg body weight, 15 mg/kg body weight and 0.50 μg/kg body weight, respectively. At BMDL doses based on the CA concept and the factorial analysis, the mode of combined effects of the three EDCs were dose addition. Mixtures in LOAEL doses, NP and DES combined effects on rat uterine/body weight ratio indicates antagonistic based on the CA concept but additive based on the factorial analysis. Combined effects of other mixtures are all additive by using the two models. CONCLUSION Our results showed that CA model provide more accurate results than the factorial analysis, the mode of combined effects of the three EDCs were dose addition, except mixtures in LOAEL doses, NP and DES combined effects indicates antagonistic effects based on the CA model but additive based on the factorial analysis. In particular, BPA and NP produced combination effects that are larger than the effect of each mixture component applied separately at BMDL doses, which show that additivity is important in the assessment of chemicals with estrogenic effects. The use of BMDL as point of departure in risk assessment may lead to underestimation of risk, and a more balanced approach should be considered in risk assessment.
Animals ; Benzhydryl Compounds ; toxicity ; Diethylstilbestrol ; toxicity ; Dose-Response Relationship, Drug ; Drug Interactions ; Endocrine Disruptors ; toxicity ; Estrogens ; toxicity ; Models, Theoretical ; Phenols ; toxicity ; Rats ; Rats, Sprague-Dawley ; Risk Assessment

OBJECTIVES: The association between concentrations of sulfur dioxide (SO), nitrogen dioxide (NO), carbon monoxide (CO), ozone (O), and emergency ambulance dispatches (EADs) for asthma was explored in the central Sichuan Basin of southwestern China for the first time. METHODS: EADs for asthma were collected from the Chengdu First-Aid Command Center. Pollutant concentrations were collected from 24 municipal environmental monitoring centers and including SO, NO, CO, daily 8-h mean concentrations of O (O-8 h), and particulate matter less than 2.5 μm in aerodynamic diameter (PM). The climatic data were collected from the Chengdu Municipal Meteorological Bureau. All data were collected from years spanning 2013-2017. A time-stratified case-crossover design was used to analyze the data. RESULTS: After controlling for temperature, relative humidity, and atmospheric pressure, IQR increases in SO (13 μg/m), NO (17 μg/m), and CO (498 μg/m) were associated with 18.8%, 11.5%, and 3.1% increases in EADs for asthma, respectively. The associations were strongest for EADs and SO, NO, and CO levels with 3-, 5-, and 1-day lags, respectively. CONCLUSIONS This study provides additional data to the limited body of literature for potential health risks arising from ambient gaseous pollutants. The results of the study suggest that increased concentrations of SO, NO, and CO were positively associated with emergency ambulance dispatches for asthma in Chengdu, China. Further studies are needed to investigate the effects of individual air pollutants on asthma.
Air Pollutants ; analysis ; toxicity ; Asthma ; chemically induced ; epidemiology ; Carbon Monoxide ; analysis ; toxicity ; China ; epidemiology ; Cities ; Cross-Over Studies ; Emergency Medical Dispatch ; statistics & numerical data ; Environmental Monitoring ; statistics & numerical data ; Humans ; Nitrogen Dioxide ; analysis ; toxicity ; Ozone ; analysis ; toxicity ; Particle Size ; Particulate Matter ; analysis ; toxicity ; Risk ; Sulfur Dioxide ; analysis ; toxicity

Introduction: With the increasing clinical use of titanium dioxide nanoparticles (nano-TiO2), a better understanding of their safety in the human use is critical. The present study aims to review the potential application of nano-TiO2 as targeted cancer therapy based on their toxicity risk which highly dependent on their physio-chemical properties. Methods: This review was performed based on PRISMA-P protocol that begin with literature searching on the selected databases; PubMed, Springer Link, Science Direct and general search engine; Google Scholar from 2013 to 2018. Studies retrieved by the pre-determined keywords (titanium dioxide nanoparticles, toxicity, genotoxicity, cytotoxicity, targeted cancer therapy) that assessed toxicity risk of nano-TiO2 in cancer therapeutics were included. Results: The search retrieved 252 articles. Assessment of eligibility by application of inclusion criteria yielded 14 articles. Nano-TiO2 induced cytotoxicity and genotoxicity in dose and time-dependent manner killing the cancerous cells. All studies used primary particles size < 100 nm with mean of 39.38 and standard deviation of 30.47 which is lower than the mean denoting diameter distribution from selected studies are concentrated from the mean. Conclusion: This review suggest that TiO2 nanoparticles can be considered as an ideal candidate for drug-delivery vehicle for targeted cancer therapy by specifically tailored their physio-chemical properties of this nanoparticles according to desired target site and functions to ensure its optimal efficacy.
Toxicity risk