Complex crown-root fractures in the esthetic zone refer to a type of dental trauma occurring in the anterior region, characterized by concurrent fractures involving both the crown and the root, with associated pulp exposure and periodontal tissue injury. These injuries consistently exhibit critical anatomical features, including a fixed palatal fracture location below the alveolar crest, compromised residual tooth structure, and frequent encroachment of the biological width. To predict treatment outcomes, a risk assessment framework based on the restoration-tooth-periodontium interface was developed. Resistance risk was evaluated by assessing the type of residual dentin ferrule and the length of the root within the alveolar bone, while periodontal risk was assessed according to gingival phenotype and alveolar bone morphology. Based on these risk dimensions and the principles of aesthetics, stability, and minimally invasive treatment, a diagnostic classification system was established to categorize fractures into three types: favorable, intervention and high-risk. Type-specific management strategies were proposed: for favorable cases, crown lengthening combined with deep margin elevation to reduce periodontal risk is recommended; for intervention cases, orthodontic extrusion or surgical extrusion is applied to simultaneously address both ferrule deficiency and biological width violation; for high-risk cases, extraction followed by implant restoration is advised due to limited root preservation value. The presented classification enables clinicians to adopt a scientific and structured approach to treatment planning for these complex crown-root fractures in the aesthetic zone.
Humans ; Tooth Fractures/therapy* ; Tooth Root/injuries* ; Risk Assessment ; Tooth Crown/injuries* ; Periodontium ; Esthetics, Dental ; Dental Restoration, Permanent/methods*

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

OBJECTIVES: This study aimed to evaluate the clinical application value of in-situ crown reattachment technique combined with pulpotomy in the treatment of complicated crown-root fractures in young permanent anterior teeth. METHODS: A prospective study was conducted on 50 children with complicated crown-root fractures in young permanent anterior teeth, who were treated at the Pediatric Dentistry Department, Hospital of Stomatology, Xi'an Jiaotong University from June 2023 to June 2024. All patients underwent in-situ crown reattachment technique combined with pulpotomy. Clinical examinations, radiographic evaluations, and subjective satisfaction surveys (using a Likert scale of 1-10) were conducted at 1, 6, and 12 months postoperatively. Data were analyzed using SPSS 23.0. RESULTS: The loss-to-follow-up rate was 12% (6/50), with 44 cases completing the 12 months of evaluation. The clinical success rate was 93.18% (41/44), and the radiographic success rate was 97.73% (43/44). The subjective satisfaction scores showed a significant improvement in masticatory function from 7.03±0.52 at 1 month to 8.07±0.92 at 12 months postoperatively (P<0.05), whereas the scores for aesthetics, comfort, and quality-of-life impact showed no statistically significant differences (P>0.05). CONCLUSIONS In-situ crown reattachment technique combined with pulpotomy effectively treats complicated crown-root fractures in young permanent anterior teeth, demonstrating a high short-term clinical success rate, significantly improved masticatory function, and minimally invasive preservation of pulp vitality and root development potential. This technique provides an optimized treatment option for dental trauma in children, although its long-term efficacy requires further validation.
Humans ; Pulpotomy ; Tooth Fractures/surgery* ; Child ; Prospective Studies ; Male ; Female ; Tooth Root/injuries* ; Tooth Crown/injuries* ; Treatment Outcome ; Incisor/injuries* ; Child, Preschool

This report presents a case of a 9-year-old child with a complicated crown-root fracture of the maxillary central incisor, accompanied with a root fracture. The treatment strategy was minimally invasive, focusing on vital pulp preservation, root fracture recovery, and crown restoration. The fractured crown was reattached using resin short posts to enhance retention, resulting in aesthetic and functional restoration of the anterior teeth. A 2-year follow-up revealed favorable clinical and radiographic outcomes.
Humans ; Child ; Tooth Fractures/therapy* ; Tooth Root/injuries* ; Incisor/injuries* ; Tooth Crown/injuries* ; Post and Core Technique ; Dental Restoration, Permanent/methods* ; Maxilla

Dental trauma is a common oral condition in children. For single-type trauma to young permanent teeth, timely treatment often results in a high survival rate for both the teeth and the pulp. However, in cases of complex dental trauma or when supernumerary teeth are impacted near the apex of the injured tooth, the prognosis is less predictable. This article reports a case of root fracture in an immature maxillary permanent central incisor combined with impacted supernumerary tooth in the apical region. After supernumerary tooth extraction and pulp revascularization therapy, the case demonstrated a good treatment outcome over a nearly 10-year follow-up period.
Child ; Humans ; Incisor/injuries* ; Maxilla ; Tooth Extraction ; Tooth Fractures/complications* ; Tooth Root/injuries* ; Tooth, Impacted/surgery* ; Tooth, Supernumerary/surgery*

Post-and-core crown is one of the most common forms of restoration of tooth after root canal therapy (RCT). Infection control is the core objective of RCT, which is usually well realized by endodontists. However, many prosthodontists often neglect the infection control of the tooth and the maintenance of the curative effect of RCT during the process of post-and-core crown, which may lead to the failure of the final restoration. The concept of integrated crown-root treatment advocated recently requires clinicians to consider the RCT and final restoration as a whole, rather than simply divided into two parts-endodontic treatment and restorative treatment. As the core content of integrated crown-root treatment, infection control should be taken seriously by clinicians and implemented throughout the whole treatment process, especially in the restorative treatment that is easily overlooked after RCT. Therefore, this article describes the infection control of post-and-core crown restoration, classifies the tooth requiring post-and-core crown restoration, and puts forward the measures of infection control before and during post-and-core crown restoration, in order to provide reference and guidance for clinical practice.
Humans ; Crowns ; Tooth Crown ; Post and Core Technique ; Root Canal Therapy ; Infection Control ; Tooth Fractures

OBJECTIVE: To study the effect of various intracanal materials on the accuracy of oral maxillofacial cone-beam computed tomography (CBCT) for the diagnosis of vertical root fracture (VRF). METHODS: A total of twenty-four structurally intact single root canal dried and isolated teeth extracted for orthodontic treatment or periodontal disease were collected. The teeth were decrowned along the cemento-enamel junction (CEJ) and then used as samples for the study after conventional root canal preparation and post preparation. The 24 samples were divided into two groups with 12 samples in each group. Group A was the control group (no VRF group). According to intracanal materials, they were divided into five subgroups: blank group, fiber post group, gutta-percha point group, titanium post group and gold-palladium post group. Group B was the experimental group (VRF group), and subgroups were grouped as above. The VRF model was prepared by a unified method in the VRF group: the root was completely fractured in the buccolingual direction with a custom root canal nail and then cemented and reset. The control group was not subjected to the simulation of VRF. Titanium post and gold-palladium post were made according to the individuality of the root canal preparation, and the tightness of the post to the root canal wall was confirmed by X-ray radiograph. Then all the samples were scanned by CBCT in the isolate swine mandibular alveolar sockets. The diagnostic accuracy was statistically analyzed via blind interpretation by experienced endodontic specialists and oral and maxillofacial medical imaging specialists. RESULTS: The accuracy of the diagnosis of VRF in the blank group, fiber post group, gutta-percha point group, titanium post group, and gold-palladium post group in CBCT was 95.83%, 91.67%, 87.50%, 79.17%, and 45.83%, respectively. Compared with the blank group, the differences were not statistically significant in the fiber post group (P>0.999), the gutta-percha point group (P=0.500) and the titanium post group (P=0.125). The lowest diagnostic accuracy of VRF was found in the gold-palladium post group, and the difference was statistically significant compared with all other groups (P < 0.001). CONCLUSION Various intracanal materials have different degrees of influence on the diagnostic accuracy of VRF diagnosis in CBCT. The influence of fiber post, gutta-percha point and titanium post was small, while the influence of gold-palladium post was significant.
Animals ; Cone-Beam Computed Tomography/methods* ; Gold ; Gutta-Percha ; Palladium ; Swine ; Titanium ; Tooth Fractures/diagnostic imaging* ; Tooth Root/injuries* ; Reproducibility of Results

Dental Cementum ; Humans ; Tooth Fractures

OBJECTIVE: To analyze the etiological and clinical characteristics of oral emergency patients under 18 years with dental trauma, and to provide guidance on the prevention and treatment in children and adolescents. METHODS: A retrospective study on the intact data of the dental trauma patients under 18 years from January 2016 to December 2018 in the Department of Oral Emergency in Peking University School of Stomatology was conducted, and the distribution of the patients' gender, age and visiting time, as well as the number and position of traumatic teeth, diagnostic classification, and multiple injury with dental trauma were analyzed. RESULTS: During the period, 54.2% of the first visit dental trauma patients (10 164) were children or adolescents (5 506). The two peak ages were 3-4 and 7-9 years. The incidence of the male was higher than the female in every age group (Wilcoxon test, P < 0.001). From May to June and September to November, there were more cases of dental trauma. The peak time of daily dental trauma cases was from 19:00 to 20:00 (Jonckheere-Terpstra test, P < 0.001). The positions of traumatic teeth in both sides were approximate symmetrical, and maxillary central incisors were the most affected. 52.3% of the patients suffered multiple teeth injuries. Among the permanent teeth trauma, enamel and dentin fracture was the most common (24.7%), followed by concussion (20.5%), sub-luxation (17.9%) and complicated crown fracture (14.4%). And among the primary teeth trauma, subluxation was the most common (31.1%), followed by concussion (14.5%) and lateral luxation (9.5%). 19.7% of the children and adolescent dental trauma patients were also suffered maxillofacial soft or hard tissue injury. CONCLUSION The incidence of dental trauma in children and adolescents is higher than that in adults. There were two age peaks among the children and adolescents patients. Primary teeth and young permanent teeth were usually suffered. Clinical treatment should be considered along with the characteristics of child tooth growth. In order to prevent the occurrence of dental trauma, early orthodontic intervention should be carried out in children with severe overjet. Families, schools and nursery institutions should strengthen the protection against dental trauma.
Adolescent ; Adult ; Child ; Female ; Humans ; Incisor ; Male ; Overbite ; Retrospective Studies ; Tooth Avulsion ; Tooth Fractures/epidemiology* ; Tooth Injuries/epidemiology*

OBJECTIVE: To evaluate the morphology accuracy of direct occlusal veneer using two types of modified stamp-technique, comparing the Results of two types of stamp and different composite resin. METHODS: Model scanner was used to get the original data from the standard resin teeth in plastic model. Two types of stamps were made: solid silicon stamp and transparent silicon stamp. In the study, 54 resin tooth were randomly divided into 9 groups: Groups 1-8 were restored by direct composite resin, using general and bulk-filled composite resin in occlusal veneer (1 mm or 2 mm) with two types of stamp-technique (the solid silicon, and the transparent silicon), and the control group was restored by indirect way using CAD/CAM composite resin restoration by biocopy technique to mimic the original shape of the teeth. After the resin teeth were prepared for occlusal veneer, the direct and indirect composite resins were restored. After the restoration was finished, the data were obtained again by the same model scanner in the plastic model. 3D comparisons were made using the original and restoration data, the average difference and the root mean square of difference (RMS) were recoded from the software. The RMS of all the groups were analyzed using one way ANOVA (α=0.05). RESULTS: The RMS of occlusal surface in solid silicon stamp group was (0.136±0.031) mm, in transparent silicon group was (0.130±0.024) mm, and in control group was (0.130±0.009) mm. There were no significant difference. While the RMS of buccal/lingual surface in solid silicon stamp group was the smallest [(0.135±0.020) mm, P < 0.05], and in transparent silicon group it was (0.147±0.021) mm, and control group (0.153±0.014) mm. The general composite resin using the two types of stamp had the largest occlusal RMS in 2 mm occlusal veneer, which were significantly larger than control group (P < 0.05). CONCLUSION The direct occlusal veneer using two types of modified "stamp-technique" had relatively good morphology accuracy. Direct occlusal veneer using bulk-filled composite resin made with two types of stamp technique had even more accurate morphology than using general composite resin. The solid silicon stamp had a better morphology accuracy in buccal/lingual surface than the transparent silicon stamp.
Composite Resins ; Computer-Aided Design ; Dental Restoration, Permanent ; Humans ; Materials Testing ; Tooth ; Tooth Fractures