OBJECTIVES: This study aimed to observe the color rebound and rebound rates of non-pulp discolored teeth within 1 year after routine internal bleaching to guide clinical practice and prompt prognosis. METHODS: In this work, the efficacy of bleaching was observed in 20 patients. The color of discolored teeth was measured by using a computerized colorimeter before bleaching; immediately after bleaching; and at the 1st, 3rd, 6th, 9th, and 12th months after bleaching. The L*, a*, and b* values of the color of cervical, mesial, and incisal parts of the teeth were obtained, and the color change amounts ΔE*, ΔL*, Δa*, and Δb* were calculated. The overall rebound rate (P*) and the color rebound velocity (V*) were also analyzed over time. RESULTS: In 20 patients following treatment, the average ΔE* of tooth color change was 14.99. After bleaching, the neck and middle of the teeth ΔE* and ΔL* decreased in the 1st, 3rd, 6th, 9th, and 12th months, and the differences were statistically significant. Meanwhile, from the 9th month after bleaching, the rebound speed was lower than that in the 1st month, and the difference was statistically significant. The incisal end of the tooth ΔE* and ΔL* decreased in the 6th, 9th, and 12th months after bleaching, and the differences were statistically significant. No significant difference was found in the rebound speed between time points. However, this rate settled after the 9th month, with an average color rebound rate of 30.11% in 20 patients. CONCLUSIONS The results indicated that internal bleaching could cause a noticeable color change on pulpless teeth. The color rebound after bleaching was mainly caused by lightness (L*), which gradually decreased with time, and it was slightly related to a* and b*. The color of the teeth after internal bleaching rebounded to a certain extent with time, but the color rebound speed became stable from the 9th month. Clinically, secondary internal bleaching can be considered at this time according to whether the colors of the affected tooth and the adjacent tooth are coordinated and depending on the patient's needs.
Humans ; Tooth Bleaching/methods* ; Tooth, Nonvital/drug therapy* ; Color ; Tooth Discoloration/drug therapy* ; Tooth ; Hydrogen Peroxide/therapeutic use* ; Tooth Bleaching Agents/therapeutic use*

OBJECTIVE: To select the most effective method among different masking treatments, such as different thickness and transparence, tissue surface's opaque coating, and opaque resin cement to restore discolored teeth esthetically by porcelain veneer. METHODS: Four extracted intact maxillary central incisors were prepared for porcelain veneer restoration and each three heat pressed porcelain veneers from three thicknesses (0.8 mm, 1.0 mm, 1.2 mm) and two transparency(high transparence, HT and low transparence, LT))in Vita shade A2 were fabricated for each tooth, in total of 72 pieces. The surfaces of three prepared teeth were then painted to mimic situations of severe dental fluorosis, severe tetracycline teeth, and necrotic teeth. Each of the veneers was temporarily cemented to the corresponding tooth surface using try-in cements with three different colors (transparent, opaque, and yellow), then used the shade guide (3D master) and electronic colorimeter (easy shade) to record the shade of each porcelain veneer through hue, lightness, and chroma reading. After that, high-transparence porcelain veneers in thickness of 0.8 mm was fused with a layer of opaque porcelain in tissue surface, and were shade matched again after cementation. Statistic treatments were performed to analyze the difference in each masking method. RESULTS: For each 0.2 mm increase in the veneer thickness of porcelain, the average lightness was reduced by 1 unit, while the chroma was not changed which was independent of the type of the resin cements. When the thickness of the porcelain veneer was decreased to 0.8 mm, the opacity effect was not remarkable even if a low-transparence porcelain veneer was used. Transparent and yellow resin cements had poor opaque performance, while opaque resin cement could reduce the lightness by 2 units and the chroma was also reduced. The opaque layer of the tissue surface could be applied uniformly, and the lightness and chroma could be reduced to Vita 2M1 to 2M1.5 levels regardless of the color of resin cements, which suggested a stable opacity effect for different discolored teeth in this study. CONCLUSION For porcelain veneer restoration of discolored teeth, thickened veneers are the most effective means to display a natural transmittance and color. Tissue surface's opacity coatings and opaque resin cements can also be used to reduce grayscale and increase lightness.
Color ; Humans ; Materials Testing ; Prosthesis Coloring ; Resin Cements ; Tooth Discoloration/therapy*

There are several causes of tooth discoloration following root canal treatment. In this study, we evaluated the effects of sealers on tooth discoloration and internal bleaching. Twenty-four teeth were divided into 4 groups: control group, AH plus, Endosequece BC, and MTA fillapex group. Root canal filling was performed using each sealer conventionally and non-vital bleaching was performed with sodium perborate. The L, a, and b values were measured using Vita easyshade. Tooth discoloration after root canal treatment occurs irrespective of the type of sealers and may cause discoloration with only gutta-percha cone. The effect of non-vital bleaching following the use of calcium silicate-based sealers such as Endosequece BC and MTA fillapex was higher than that of AH plus. Therefore, it needs careful use of sealers in endodontics and calcium silicate-based sealers have advantages of bleaching in case of discolored tooth.
Calcium ; Dental Pulp Cavity ; Endodontics ; Gutta-Percha ; Pemetrexed ; Sodium ; Tooth Discoloration ; Tooth

OBJECTIVES: The objective of this study was to assess coronal discoloration induced by the following intracanal medicaments: calcium hydroxide (CH), a mixture of CH paste and chlorhexidine gel (CH/CHX), and triple antibiotic paste (3Mix). MATERIALS AND METHODS: Seventy extracted single-canal teeth were selected. Access cavities were prepared and each canal was instrumented with a rotary ProTaper system. The specimens were randomly assigned to CH, CH/CHX, and 3Mix paste experimental groups (n = 20 each) or a control group (n = 10). Each experimental group was randomly divided into 2 subgroups (A and B). In subgroup A, medicaments were only applied to the root canals, while in subgroup B, the root canals were completely filled with medicaments and a cotton pellet dipped in medicament was also placed in the pulp chamber. Spectrophotometric readings were obtained from the mid-buccal surface of the tooth crowns immediately after placing the medicaments (T1) and at 1 week (T2), 1 month (T3), and 3 months (T4) after filling. The ∆E was then calculated. Data were analyzed using 2-way analysis of variance (ANOVA), 3-way ANOVA, and the Scheffé post hoc test. RESULTS: The greatest color change (ΔE) was observed at 3 months (p < 0.0001) and in 3Mix subgroup B (p = 0.0057). No significant color change occurred in the CH (p = 0.7865) or CH/CHX (p = 0.1367) groups over time, but the 3Mix group showed a significant ΔE (p = 0.0164). CONCLUSION: Intracanal medicaments may induce tooth discoloration. Use of 3Mix must be short and it must be carefully applied only to the root canals; the access cavity should be thoroughly cleaned afterwards.
Calcium Hydroxide ; Chlorhexidine ; Dental Pulp Cavity ; Reading ; Tooth Crown ; Tooth Discoloration ; Tooth

Although Mycoplasma pneumoniae pneumonia (MPP) has been generally susceptible to macrolides, the emergence of macrolide-resistant MPP (MRMP) has made its treatment challenging. MRMP rapidly spread after the 2000s, especially in East Asia. MRMP is more common in children and adolescents than in adults, which is likely related to the frequent use of macrolides for treating M. pneumoniae infections in children. MRMP is unlikely to be related to clinical, laboratory, or radiological severity, although it likely prolongs the persistence of symptoms and the length of hospital stay. Thereby, it causes an increased burden of the disease and poor quality of life for the patient as well as a societal socioeconomic burden. To date, the only alternative treatments for MRMP are secondary antimicrobials such as tetracyclines (TCs) or fluoroquinolones (FQs) or systemic corticosteroids; however, the former are contraindicated in children because of concerns about potential adverse events (i.e., tooth discoloration or tendinopathy). A few guidelines recommended TCs or FQs as the second-line drug of choice for treating MRMP. However, there have been no evidence-based guidelines. Furthermore, safety issues have not yet been resolved. Therefore, this article aimed to review the benefits and risks of therapeutic alternatives for treating MRMP in children and review the recommendations of international or regional guidelines and specific considerations for their practical application.
Adolescent ; Adrenal Cortex Hormones ; Adult ; Child ; Drug Resistance ; Far East ; Fluoroquinolones ; Humans ; Length of Stay ; Macrolides ; Mycoplasma pneumoniae ; Mycoplasma ; Pneumonia ; Pneumonia, Mycoplasma ; Quality of Life ; Risk Assessment ; Tetracycline ; Tetracyclines ; Tooth Discoloration

OBJECTIVE: The aim of this study was to evaluate discoloration of teeth undergoing regenerative endodontic procedures (REPs) using blood clot or platelet-rich fibrin (PRF) as the scaffolds and different calcium silicate-based materials as the intracanal coronal barriers in an ex vivo model. MATERIALS AND METHODS: Forty-eight bovine incisors were prepared and disinfected using 1 mg/mL double antibiotic paste (DAP). The specimens were then randomly divided into 2 groups (n = 24) according to the scaffolds (blood or PRF). After placement of scaffolds each group was divided into 2 subgroups (n = 12) according to the intracanal coronal barriers (ProRoot MTA or Biodentine). The pulp chamber walls were sealed with dentin bonding agent before placement of DAP and before placement of scaffolds. The color changes (∆E) were measured at different steps. The data were analyzed using 2-way analysis of variance. RESULTS: Coronal discoloration induced by DAP was not clinically perceptible (ΔE ≤ 3.3). Regarding the type of the scaffold, coronal discoloration was significantly higher in blood groups compared with PRF groups at the end of REP and after 1 month (p < 0.05). However, no significant difference was found between PRF and blood clot after 6 months (p > 0.05). Considering the type of intracanal coronal barrier, no significant difference existed between ProRoot MTA and Biodentine (p > 0.05). CONCLUSIONS: With sealing the dentinal tubules of pulp chamber with a dentin bonding agent and application of DAP as an intracanal medicament, coronal color change of the teeth following the use of PRF and blood sealed with either ProRoot MTA or Biodentine was not different at 6-month follow-up.
Blood Group Antigens ; Calcium ; Dental Pulp Cavity ; Dentin ; Fibrin ; Follow-Up Studies ; Incisor ; Pemetrexed ; Tooth Discoloration ; Tooth

OBJECTIVE: To determine the optimum staining condition of tea solutions on bovine incisors in vitro, by comparing the color stability of tooth surface of different concentrations of tea solutions and methods on bovine incisors in vitro. METHODS: Twenty bovine incisors with color surface A1 were chosen, then randomly divided into 4 groups (n=10). Group 1: soaked with 2% tea solution continuously for 6 days; group 2: soaked with 2% tea solution for 6 days, but changed fresh tea solution everyday; group 3: soaked with 1% tea solution continuously for 6 days; group 4: soaked with 1% tea solution for 6 days but fresh tea solution changed every day. After 6 days of staining, the surface color (Δ E value) of all the samples were measured with crystal eye. After brushing 30 times with toothbrushes, the color of bovine incisors were measured again. Then the samples were soaked in artificial saliva at 37 ° C, and Δ E value was measured for 14 days. RESULTS: After staining for 6 days, the Δ E values of the 2% tea solution groups were better than those of the 1% groups (20.21 vs. 16.44, 24.09 vs. 19.22, P<0.05); the groups with the same tea solution concentration, a better result was observed for the group soaked with daily fresh tea solution than for the group that experienced continuous staining (24.09 vs. 20.21, 19.22 vs. 16.44, P<0.05). Groups 1 and 2 were selected for subsequent brushing experiments. The color of both groups became lighter after brushing, and a better result was observed for the continuous staining group than for the group stained in daily fresh solution (3.06 vs. 9.51, P<0.05). The samples with better coloring effect soaked with 2% tea solution continuously for 6 days were put into artificial saliva for 14 days. There was not any significant change in coloring at the end of the first two days (1.51 vs. 1.51, P>0.05), and the color was visibly lighter after the third day (1.51 vs. 5.89, P<0.05), and no further significant change was observed until the 14th day (5.81 vs.5.89, P>0.05), which was darker coloring than that of the pre-staining group. CONCLUSION Continuous staining on bovine incisors with 2% tea solution with subsequent soaking in artificial saliva resulted in consistent coloring from day 3 to day 14, and this method could be used as an ideal model for teeth staining in vitro.
Animals ; Cattle ; Color ; Incisor ; Materials Testing ; Staining and Labeling ; Tea/adverse effects* ; Tooth Discoloration/etiology*

OBJECTIVE: Three kinds of zirconia specimens were made respectively by milling of the prisintered blocks and by three dimensional (3D) gel deposition for in vitro evaluation of their optical translucency under three different thicknesses and their color masking effect on discolored teeth. The study aims for establishing the principle for guiding the materials selection in clinical practice. METHODS: Ninety A2-colored zirconia disc specimens with diameter of 14 mm were prepared and were divided into three groups (n=30). (1) Group CZ, by milling of the presintered blanks; (2) Group NZW, by 3D gel deposition, without a color masking opaque inner layer; (3) Group NZY, by 3D gel deposition, with a color masking opaque inner layer. Furthermore, each group was divided into three sub-groups (n=10) according to the sample thickness, i.e., 0.6, 1.0 and 1.5 mm, respectively. The maxillary anterior teeth with severe discoloration, extracted owing to periodontal disease, were collected and embedded. By gentle gridding and polishing a plane, larger than 6 mm2×6 mm², was generated on the labial surface of each tooth. Chromatic values(CIE1976-L^*a^*b^*) of the zirconia samples in the nine sub-groups were measured by the spectrophotometer Crystaleye in front of the black or white background in a cassette, and the translucency parameter (TP) values were calculated for each sample. Thereafter the zirconia specimens were bonded onto the labial surface of the polished teeth for measuring the chromatic values, using the chromatic value of the medium 1/3 of the standardized Vita A2 as a control. The color aberration ΔE between each zirconia specimen and the control value was calculated, respectively. The results were statistically analyzed by One-way ANOVA and Bonferroni. RESULTS: (1) The optical transparency of the three kinds of zirconia disc specimens with the thickness of 0.6, 1.0 and 1.5 mm was 14.09, 12.31 and 10.45 for group CZ; 19.84, 16.54 and 12.44 for group NZW;14.81, 13.16 and 11.92 for group NZY. In each group, the degree of optical transparency of the specimens showed a clear tendency as in the sub-group 0.6 mm >1.0 mm >1.5 mm. The TP value of the specimens in the three groups with the same thickness showed a tendency of the group NZW >group NZY >group CZ. (2) After bonding onto the polished labial surface of the teeth, the color aberration ΔE of the specimens with the thickness of 0.6, 1.0 and 1.5 mm was calculated to be 10.77, 9.94 and 8.50 for group CZ; 6.84, 5.89 and 5.29 for group NZW; 4.16, 3.92 and 3.67 for group NZY. In each group, the color aberration of the specimens showed a clear tendency as in the sub-group 0.6 mm >1.0 mm >1.5 mm; the color aberration of the three groups with the same thickness was in the order of the group CZ >group NZW >group NZY. CONCLUSION In all the specimen groups with a fixed specimen thickness, the optical translucency of the specimen was the highest in group NZW made by 3D gel deposition, and the best color masking effect was obtained in specimens with a color masking opaque inner layer in group NZY, where a thickness of 0.6 mm was sufficient enough for obtaining the ideal color masking effect.
Ceramics ; Color ; Humans ; Materials Testing ; Tooth Discoloration ; Zirconium

PURPOSE: Chloramphenicol and tetracycline are not recommended for treating scrub typhus in pediatric patients because of potential side effects, such as aplastic anemia or tooth discoloration. While clarithromycin has recently been used in adults, few reports have been published on its effects in pediatric patients. We report the clinical profiles of pediatric scrub typhus and the effects of clarithromycin on scrub typhus in children. METHODS: We retrospectively analyzed medical records of 56 children with scrub typhus who were admitted between 2004 and 2013 to Chonbuk National University Hospital, Jeonju, Korea. Cases were divided into 3 groups based on thetreatment drug (chloramphenicol, azithromycin, and clarithromycin). We compared their clinical manifestations and laboratory findings. RESULTS: All patients exhibited fever and rash. Other common clinical manifestations were eschars (66%), lymphadenopathy (48%), upper respiratory symptoms (42%), abdominal pain (32%), and hepatosplenomegaly (14%). Elevated levels of C-reactive protein, erythrocyte sedimentation rates, aspartate transaminase, and alanine transaminase were detected in 95%, 96%, 84%, and 77% of patients, respectively. Additionally, decreased platelet and white blood cell levels were observed in 43% and 36% of patients, respectively. There were no statistical differences between the treatment groups in mean age (P=0.114) or sex (P=0.507). However, time to defervescence after the treatments differed significantly, being the shortest in the clarithromycin group (P=0.019). All patients recovered without complications related to the disease or drugs. CONCLUSION: Clarithromycin was as effective as chloramphenicol and azithromycin in pediatric scrub typhus patients and may be used as a first-line treatment drug.
Abdominal Pain ; Adult ; Alanine Transaminase ; Anemia, Aplastic ; Aspartate Aminotransferases ; Azithromycin* ; Blood Platelets ; Blood Sedimentation ; C-Reactive Protein ; Child* ; Chloramphenicol* ; Clarithromycin* ; Exanthema ; Fever ; Humans ; Jeollabuk-do ; Korea ; Leukocytes ; Lymphatic Diseases ; Medical Records ; Retrospective Studies ; Scrub Typhus* ; Tetracycline ; Tooth Discoloration

OBJECTIVETo investigate a method of designing an accurate and scientific shade guide, especially used for judging the effect of tooth whitening, by analyzing the colorimetric values of discolored teeth statistically.

METHODSOne hundred thirty-six pictures of patients who had been receiving the Beyond cold light whitening treatment from February 2009 to July 2014 were analyzed, including 25 tetracycline teeth, 61 mottled-enamel teeth, and 50 yellow teeth. The colorimetric values of discolored teeth were measured. The L* values of shade tabs were calculated by hierarchical clustering of those of discolored teeth. The a* and b* values of shade tabs were the mean of those observed for discolored teeth. Accordingly, different shade guides were designed for each type of discolored teeth, and the effects were evaluated.

RESULTSA statistically significant difference in colorimetric values was found among the three types of discolored teeth. Compared with the Vitapan Classical shade guide, the shade guides designed through the present method were more scientific and accurate in judging the effect of tooth whitening. Moreover, the arrangement of shade tabs was more logical, and the color difference between shade tabs and discolored teeth was smaller.

CONCLUSIONThe proposed designing method is theoretically feasible, although its clinical effect has yet to be proven.

Color ; Colorimetry ; Dental Enamel ; Fluorosis, Dental ; Humans ; Incisor ; Light ; Prosthesis Coloring ; Research ; Tooth Bleaching ; methods ; standards ; Tooth Discoloration