OBJECTIVE: To evaluate the influence of base materials on stress distribution in endodontically treated maxillary premolars restored with endocrowns using three-dimensional finite element analysis. METHODS: A maxillary second premolar was scanned by Micro-CT and a three-dimensional finite element model of ceramic endocrown with 1 mm thickness of base was established. A model without base was also established as a negative control. Four kinds of conventional base materials with different elastic modulus were adopted: light cure glass ionomer(3M Vitrebond, 3 657 MPa), flowable composite resin(3M Filtek Z350XT Flowable Restorative, 7 300 MPa), high strength glass ionomer(GC Fuji Ⅸ, 13 130 MPa), and posterior composite resin(3M Filtek P60, 19 700 MPa). With a 200 N force loaded vertically and obliquely, the distribution and magnitude of stress in the tooth tissue and adhesive layer were investigated by three-dimensional finite element analysis. RESULTS: The maximum von Mises stress values(vertical/oblique) in dentin and adhesive layer were measured as follows: (1) no base material: 19.39/70.49 MPa in dentin and 6.97/17.97 MPa in adhesive layer; (2) light cure glass ionomer: 19.00/69.75 MPa in dentin and 6.87/16.30 MPa in adhesive layer; (3) flowable composite resin: 18.78/69.33 MPa in dentin and 6.79/16.17 MPa in adhesive layer; (4) high strength glass ionomer: 18.71/69.20 MPa in dentin and 6.74/16.07 MPa in adhesive layer; (5) posterior composite resin: 18.61/69.03 MPa in dentin and 6.70/16.01 MPa in adhesive layer. Under the same loading condition, models with different elastic moduli of base materials had similar stress distribution patterns. The von Mises stress of tooth tissue was mainly concentrated in the tooth cervix. Under oblique load, the regions where von Mises stress concentrated in were similar to those under a vertical load, but the values increased. The stress concentration in the tooth cervix was alleviated in models with base materials compared with the model without base material. The maximum von Mises stress in the tooth tissue and adhesive layer decreased when the elastic modulus of base materials increased and got close to that of dentin. CONCLUSION The posterior composite resin of which the elastic moduli is high and close to that of dentin is recommended as base material for premolar endocrowns to alleviate the concentration of stress in tooth cervix and adhesive layer.
Bicuspid ; Ceramics ; Composite Resins ; Dental Stress Analysis ; Dentin ; Finite Element Analysis ; Humans ; Materials Testing ; Stress, Mechanical ; Tooth Cervix ; X-Ray Microtomography

OBJECTIVE: To measure the three-dimensional morphology of the labial supraosseous gingiva (SOG) and the thickness of related labial bone in maxillary anterior teeth of periodontally healthy Han nationality youth using soft tissue indirect imaging cone-beam computed tomography (CBCT). METHODS: Twenty-five periodontally healthy subjects (11 males and 14 females) with 150 maxillary anterior teeth were involved in this study. A special impression with radiopaque material including the maxillary teeth was made, then a CBCT scan with the elastomeric matrix in position was taken for each subject. The imaging data were generated and transferred to a volumetric imaging software in which three-dimensional reconstruction was conducted and the image analyses were carried out. Measurements were made at the site of labial center of the maxillary anterior teeth. The height of the SOG, the distance between cemento-enamel junction (CEJ) and bone crest, the gingival thickness at the CEJ, and the thickness of bone 2 mm below the labial bone crest were measured and the correlation analysis between the parameters was made. All the data analyses were performed using SPSS 22.0. The data were analyzed with ANVOA and Pearson correlation tests with the significance level at α=0.05. RESULTS: The mean SOG values were (3.49±0.70) mm, (3.48±0.81) mm, and (3.54±0.67) mm for central incisors, lateral incisors and canines, respectively. There were no statistically significant differences among the different sites (P > 0.05). The mean gingival thickness values were (1.45±0.23) mm, (1.13±0.24) mm, (1.14±0.22) mm for central incisors, lateral incisors and canines, respectively. The gingival thickness of the central incisors was the largest among the maxillary anterior teeth with statistically significant difference (P < 0.05). No correlation was found between the SOG and gingival thickness among the maxillary anterior teeth (P > 0.05). CONCLUSION The gingival thickness of central incisors was the largest and the supraosseous gingival height had no correlation with gingival thickness among the periodontally healthy maxillary anterior teeth.
Adolescent ; Cone-Beam Computed Tomography ; Female ; Gingiva/diagnostic imaging* ; Humans ; Incisor/diagnostic imaging* ; Male ; Maxilla/diagnostic imaging* ; Tooth Cervix

Noncarious cervical sclerotic lesions (NCSL) are dental cervical lesions with noncarious sclerotic dentine (NCSD), which appears smooth, hard, and either light yellow or dark brown. Most NCSLs are wedge or dish shaped and commonly occur in canines and premolars, leading to dental hypersensitivity and aesthetic defect. The principal treatment is composite resin restoration; however, many clinical problems, such as retention loss, should not be ignored. NCSL's bonding interface includes NCSD and enamel, and interface pre-treatment can promote the bonding effect. This review summarizes current surface treatment methods and their influence on the bonding effectiveness of NCSL to provide guidance for clinical practice.
Acid Etching, Dental ; Composite Resins ; Dental Bonding ; Dental Restoration, Permanent ; Dentin-Bonding Agents ; Tooth Cervix

PURPOSE: This study aimed to introduce a novel method to evaluate the alveolar bone and interdental septum in the anterior mandible using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Fifty-six CBCT scans from adult patients were selected. The CBCT scans were obtained before and after orthodontic treatment. The following measurements were taken: width of the alveolar bone and the interdental septum, height of the interdental septum, height of the bone plates, distance between the cementoenamel junction and marginal bone crests, and vertical positioning of the mandibular incisor, using the lingual plane as a reference. To test the reproducibility and the stability of the lingual plane, a triangle was traced in the anterior mandible. The intra-class correlation coefficient (ICC) was used to determine intra- and inter-examiner agreement. The paired Student t-test was used to evaluate the area of the triangle and the reproducibility of all measurements. RESULTS: The ICC was excellent for the alveolar bone and dental measurements (0.9989 and 0.9977, respectively), as well as for the interdental septum (0.9987 and 0.9961, respectively). The area of the triangles showed stability in the lingual plane (P>0.05). For the alveolar bone, mandibular incisor, and interdental septum measurements, no statistically significant differences were found between the 2 examiners (P>0.05), confirming the technical reliability of the measurements. CONCLUSION: The method used in this study provides a valid and reproducible assessment of alveolar bone dimensions in the anterior mandible measured on CBCT images.
Adult ; Alveolar Bone Loss ; Alveolar Process ; Bone Plates ; Cone-Beam Computed Tomography ; Humans ; Incisor ; Mandible ; Methods ; Tooth Cervix

BACKGROUND: The mandibular third molar (M3) is typically the last permanent tooth to erupt because of insufficient space and thick soft tissues covering its surface. Problems such as alveolar bone loss, development of a periodontal pocket, exposure of cementum, gingival recession, and dental caries can be found in the adjacent second molars (M2) following M3 extraction. The specific aims of the study were to assess the amount and rate of bone regeneration on the distal surface of M2 and to evaluate the aspects of bone regeneration in terms of varying degree of impaction. METHODS: Four series of panoramic radiographic images were obtained from the selected cases, including images from the first visit, immediately after extraction, 6 weeks, and 6 months after extraction. ImageJ software® (NIH, USA) was used to measure linear distance from the region of interest to the distal root of the adjacent M2. Radiographic infrabony defect (RID) values were calculated from the measured radiographic bone height and cementoenamel junction with distortion compensation. Repeated measures of analysis of variance and one-way analysis of variance were conducted to analyze the statistical significant difference between RID and time, and a Spearman correlation test was conducted to assess the relationship between Pederson’s difficulty index (DI) and RID. RESULTS: A large RID (> 6 mm) can be reduced gradually and consistently over time. More than half of the samples recovered nearly to their normal healthy condition (RID ≤ 3 mm) by the 6-month follow-up. DI affected the first 6 weeks of post-extraction period and only showed a significant positive correlation with respect to the difference between baseline and final RID. CONCLUSIONS: Additional treatments on M2 for a minimum of 6 months after an M3 extraction could be recommended. Although DI may affect bone regeneration during the early healing period, further study is required to elucidate any possible factors associated with the healing process. The DI does not cause any long-term adverse effects on bone regeneration after surgical extraction.
Alveolar Bone Loss ; Bone Regeneration ; Compensation and Redress ; Dental Caries ; Dental Cementum ; Follow-Up Studies ; Gingival Recession ; Molar ; Molar, Third ; Periodontal Pocket ; Retrospective Studies ; Tooth ; Tooth Cervix

PURPOSE: To histologically characterize periodontal healing at 8 weeks in surgically created dehiscence defects in beagle dogs that received a collagen matrix with periodontal ligament (PDL) progenitor cells. METHODS: The bilateral maxillary premolars and first molars in 6 animals were used. Standardized experimental dehiscence defects were made on the buccal side of 3 premolars, and primary culturing of PDL progenitor cells was performed on the molars. Collagen matrix was used as a scaffold and a delivery system for PDL progenitor cells. The experimental sites were grafted with collagen matrix (COL), PDL progenitor cells with collagen matrix (COL/CELL), or left without any material (CTL). Histologic and histomorphometric analyses were performed after 8 weeks. RESULTS: The defect height from the cementoenamel junction to the most apical point of cementum removal did not significantly differ across the CTL, COL, and COL/CELL groups, at 4.57±0.28, 4.56±0.41, and 4.64±0.27 mm (mean ± standard deviation), respectively; the corresponding values for epithelial adhesion were 1.41±0.51, 0.85±0.29, and 0.30±0.41 mm (P<0.05), the heights of new bone regeneration were 1.32±0.44, 1.65±0.52, and 1.93±0.61 mm (P<0.05), and the cementum regeneration values were 1.15±0.42, 1.81±0.46, and 2.57±0.56 mm (P<0.05). There was significantly more new bone formation in the COL/CELL group than in the CTL group, and new cementum length was also significantly higher in the COL/CELL group. However, there were no significant differences in the width of new cementum among the groups. CONCLUSIONS: PDL progenitor cells carried by a synthetic collagen matrix may enhance periodontal regeneration, including cementum and new bone formation.
Animals ; Bicuspid ; Bone Regeneration ; Collagen ; Dental Cementum ; Dogs ; Molar ; Osteogenesis ; Periodontal Ligament ; Regeneration ; Stem Cells ; Tooth Cervix ; Transplants

PURPOSE: This study classified alveolar arch forms and evaluated differences in alveolar bone thickness among arch forms in the anterior esthetic region using cone-beam computed tomography (CBCT) images. MATERIALS AND METHODS: Axial views of 113 CBCT images were assessed at the level of 3 mm below the cementoenamel junction (CEJ) of the right and left canines. The root center points of teeth in the anterior esthetic region were used as reference points. Arch forms were classified according to their transverse dimensions and the intercanine width-to-depth ratio. The buccolingual alveolar bone thickness of each tooth was measured at 3 mm below the CEJ and at the mid-root level. Differences in the mean thicknesses among arch forms were analyzed. RESULTS: Anterior maxillary arches could be classified as long narrow, short medium, long medium, and long wide arches. Significant differences in buccolingual alveolar bone thickness among the arch groups were found at both levels. The long wide arches presented the greatest bone thickness, followed by the long medium arches, while the long narrow and short medium arches were the thinnest. CONCLUSION: Arch forms were classified as long narrow, short medium, long medium, and long wide. The buccolingual alveolar bone thickness exhibited significant differences among the arch forms.
Alveolar Process ; Classification ; Cone-Beam Computed Tomography ; Tooth ; Tooth Cervix

The purpose of this study was to evaluate the effect of the intracanal medicaments on the push-out bond strength of the calcium silicate-based materials.Forty extracted single-root human mandibular premolars were sectioned below cementoenamel junction. Standardized root canal dimension was obtained with a parallel post drill. The specimens were randomly divided into a control group (no medicament), and experimental groups received medicaments with either CH (calcium hydroxide), DAP (double antibiotic paste; a mixture of ciprofloxacin and metronidazole), or TAP (triple antibiotic paste; a mixture of minocycline, ciprofloxacin and metronidazole). Following removal of medicaments with irrigation, roots were cut into sections with 1-mm-thickness. Thereafter, calcium silicate-based materials are applied to the specimens : (i) ProRoot MTA® and (ii) Biodentine®. A push-out bond strength was measured and each specimen was examined to evaluate failure mode.Intracanal medication using CH significantly increased the bond strength to the root dentin. But there are no significant differences on the bond strength of ProRoot MTA® or Biodentine® among TAP, DAP and control groups. The dislodgement resistance of Biodentine® from root dentin was significantly higher than that of ProRoot MTA® regardless of the type of intracanal medicaments.
Bicuspid ; Calcium ; Ciprofloxacin ; Dental Pulp Cavity ; Dentin ; Humans ; Minocycline ; Tooth Cervix

PURPOSE: The aim of this study was to compare the root surface areas of the maxillary permanent teeth in Thai patients exhibiting anterior normal overbite and in those exhibiting anterior open bite, using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: CBCT images of maxillary permanent teeth from 15 patients with anterior normal overbite and 18 patients with anterior open bite were selected. Three-dimensional tooth models were constructed using Mimics Research version 17.0. The cementoenamel junction was marked manually. The root surface area was calculated automatically by 3-Matic Research version 9.0. The root surface areas of each tooth type from both types of bite were compared using the independent t-test (P < .05). The intraclass correlation coefficient was used to assess intraobserver reliability. RESULTS: The mean root surface areas of the maxillary central and lateral incisors in individuals with anterior open bite were significantly less than those in those with normal bite. The mean root surface area of the maxillary second premolar in individuals with anterior open bite was significantly greater than in those with normal bite. CONCLUSION: Anterior open-bite malocclusion might affect the root surface area, so orthodontic force magnitudes should be carefully determined.
Asian Continental Ancestry Group ; Bicuspid ; Cone-Beam Computed Tomography* ; Humans ; Incisor ; Malocclusion ; Open Bite* ; Overbite* ; Tooth Cervix ; Tooth*

OBJECTIVE: The aim of this study was to evaluate the skeletal and dentoalveolar changes after miniscrew-assisted rapid palatal expansion (MARPE) in young adults by cone-beam computed tomography (CBCT). METHODS: This retrospective study included 14 patients (mean age, 20.1 years; range, 16–26 years) with maxillary transverse deficiency treated with MARPE. Skeletal and dentoalveolar changes were evaluated using CBCT images acquired before and after expansion. Statistical analyses were performed using paired t-test or Wilcoxon signed-rank test according to normality of the data. RESULTS: The midpalatal suture was separated, and the maxilla exhibited statistically significant lateral movement (p < 0.05) after MARPE. Some of the landmarks had shifted forwards or upwards by a clinically irrelevant distance of less than 1 mm. The amount of expansion decreased in the superior direction, with values of 5.5, 3.2, 2.0, and 0.8 mm at the crown, cementoenamel junction, maxillary basal bone, and zygomatic arch levels, respectively (p < 0.05). The buccal bone thickness and height of the alveolar crest had decreased by 0.6–1.1 mm and 1.7–2.2 mm, respectively, with the premolars and molars exhibiting buccal tipping of 1.1°–2.9°. CONCLUSIONS: Our results indicate that MARPE is an effective method for the correction of maxillary transverse deficiency without surgery in young adults.
Adult ; Bicuspid ; Cone-Beam Computed Tomography* ; Crowns ; Humans ; Maxilla ; Methods ; Molar ; Retrospective Studies ; Sutures ; Tooth Cervix ; Young Adult* ; Zygoma