Patient's need for endodontic treatment in a short period is on the rise nowadays. Technological developments in instruments and materials are allowing single-visit endodontic treatment to be performed. The success of an endodontic treatment is also influenced by the restoration, in consideration of the remaining tooth structure. This becomes a challenge for the clinician if the cavities are large or if minimal tooth structure remains, so it needs a
minimally invasive restoration like morphology-driven preparation technique. This case report aims to describe the single-visit endodontic treatment and minimally invasive indirect restoration of the mandibular first molar. A 13-year-old girl came to the Dental Hospital of Hasanuddin University with complaints of cavities in the mandibular left posterior tooth and pain for one month. The patient had taken analgesic medication but was afforded no relief. Intraoral examination showed tooth #36 with extensive cavities reaching the proximal area, a positive thermal test, and no pain to percussion. The case diagnosis was asymptomatic irreversible pulpitis. The treatment plan was a single-visit endodontic treatment and minimally invasive indirect restoration.

Human ; Female ; Adolescent: 13-18 Yrs Old ; Pulpitis ; Tooth ; Molar

BACKGROUND AND OBJECTIVES

Orthodontic tooth movement is driven by bone remodeling influenced by systemic factors, including caffeine and ethanol. This study aimed to investigate the effects of caffeine and ethanol on the expression of Receptor Activator of Nuclear Factor κβ (RANK) and Osteoprotegerin (OPG), key bone remodeling biomarkers, during orthodontic tooth movement.

METHODS

A laboratory experimental study was conducted on 30 male Wistar rats divided into three groups: K1 (orthodontic force only), K2 (force + caffeine), and K3 (force + ethanol). Orthodontic force was applied using Ni-Ti coil springs. Caffeine and ethanol were administered orally daily. On days 7 and 14, maxillary tissues were collected and analyzed via immunohistochemistry for RANK and OPG expression. Data were analyzed using One-Way ANOVA and Independent Sample T-tests with significance at pRESULTS

Caffeine and ethanol administration increased RANK and OPG expression compared to controls; however, only the ethanol group showed a significant increase in RANK expression on day 14 (p = 0.044). OPG expression was significantly higher in treatment groups at both time points (pCONCLUSION

Caffeine and ethanol modulate bone remodeling marker expression during orthodontic force application, with ethanol significantly increasing RANK expression at later stages. Further studies are needed to clarify the clinical implications for orthodontic treatment.

Animals ; Tooth Movement Techniques ; Tooth Movement ; Osteoprotegerin ; Role ; Movement ; Ethanol ; Bone Remodeling ; Caffeine ; Immunohistochemistry

PURPOSE: Orotracheal intubation is one of the most frequently used techniques in emergency procedures and especially in anesthesia and resuscitation. Teeth may be "victims" of the orotracheal intubation. Several factors may predispose to these accidents. The aim of this study is to determine the incidence of oral trauma that occurs during scheduled and urgent oral tracheal intubation, and identify the risk factors, the types and locations of these dental injuries. METHODS: It is a cross-sectional study that lasted 6 months from June to November 2022. This study was carried out in several departments. An examination of the dental and periodontal status of patients who will undergo surgery under general anesthesia was performed before the operation according to the surgical program. Yet, in emergency settings, this examination was not possible. Patients with anterior edentation and patients refusing participation in the study were excluded. After the surgery, included patients were examined to detect eventual dental trauma such as fracture, luxation, and contusion. Collected data were entered and analyzed using SPSS version 18 software. The Wilcoxon Mann-Whitney U test was used to compare quantitative variables. The Chi-square test was used to compare qualitative variables with a statistical significance level of 5% (p < 0.05). RESULTS: There were 43 patients included in the study, and dental trauma was noted in 11 patients (25.6%). Their mean age was (59.8 ± 15.4) years. The statistical analysis shows that there is a significant relationship between age (over 40 years old) and trauma (p = 0.004). Among the traumatized group, orotracheal intubation was undergone for 8 cases according to the surgical program whereas it was performed, for 3 cases, in emergency settings. The difference between the 2 types of intervention is statistically significant (p = 0.045). The odds ratio was 0.086 (95% CI: 0.008 - 0.942). A Mallampati score of 1 was rated for 6 injured (54.5%). The difference between the difficulty of the intubation evaluated by the Mallampati score and the occurrence of trauma was statistically insignificant (p = 0.278). The dental partial dislocation was the most frequent trauma (6 cases, 54.5%). The maxillary teeth were the most affected (n = 13, 72.2%). CONCLUSION According to the present study, the incidence of orotracheal intubation dental traumas is relatively high. The age of the patient is one of the factors predisposing to these traumas. In scheduled surgery, orotracheal intubation is quietly performed during general anesthesia, and the risk of incidence of dental trauma is reduced than in emergency settings.
Humans ; Intubation, Intratracheal/adverse effects* ; Male ; Female ; Prospective Studies ; Tooth Injuries/epidemiology* ; Cross-Sectional Studies ; Adult ; Middle Aged ; Risk Factors ; Aged ; Adolescent ; Young Adult ; Incidence

Complex crown-root fractures in the esthetic zone refer to a type of dental trauma occurring in the anterior region, characterized by concurrent fractures involving both the crown and the root, with associated pulp exposure and periodontal tissue injury. These injuries consistently exhibit critical anatomical features, including a fixed palatal fracture location below the alveolar crest, compromised residual tooth structure, and frequent encroachment of the biological width. To predict treatment outcomes, a risk assessment framework based on the restoration-tooth-periodontium interface was developed. Resistance risk was evaluated by assessing the type of residual dentin ferrule and the length of the root within the alveolar bone, while periodontal risk was assessed according to gingival phenotype and alveolar bone morphology. Based on these risk dimensions and the principles of aesthetics, stability, and minimally invasive treatment, a diagnostic classification system was established to categorize fractures into three types: favorable, intervention and high-risk. Type-specific management strategies were proposed: for favorable cases, crown lengthening combined with deep margin elevation to reduce periodontal risk is recommended; for intervention cases, orthodontic extrusion or surgical extrusion is applied to simultaneously address both ferrule deficiency and biological width violation; for high-risk cases, extraction followed by implant restoration is advised due to limited root preservation value. The presented classification enables clinicians to adopt a scientific and structured approach to treatment planning for these complex crown-root fractures in the aesthetic zone.
Humans ; Tooth Fractures/therapy* ; Tooth Root/injuries* ; Risk Assessment ; Tooth Crown/injuries* ; Periodontium ; Esthetics, Dental ; Dental Restoration, Permanent/methods*

BACKGROUND: Dental caries is a chronic childhood disease and one of the most prevalent public health problems worldwide. Lead is a heavy metal that is taken up by the teeth and bones. However, the association between lead exposure during pregnancy, when the tooth germs are formed, and the prevalence of dental caries in the primary dentition remains unclear. This study aimed to examine the association between maternal blood lead levels and the prevalence of dental caries in the primary dentition of children. METHODS: This cross-sectional study was conducted as an Adjunct Study to the Japan Environment and Children's Study (JECS), which is an ongoing nationwide birth-cohort study. Among children participating in the JECS at the University of Occupational and Environmental Health Sub-Regional Center, those aged 7-8 years underwent oral examination and questionnaire administration. The dft (i.e., sum of the number of decayed and filled primary teeth) was then determined. The dft numerically expresses the dental caries prevalence in the primary dentition (larger value indicates more prevalent dental caries). Poisson regression analyses with robust standard errors were performed to evaluate the association between maternal blood lead levels during pregnancy, measured using frozen samples, and the dft. RESULTS: The study included 139 children, of whom 54.7% were girls, and 89.2% were 7 years old. The median maternal blood lead level was 6.1 ng/g (25-75 percentile, 5.0-7.3). The median dft was 0 (25-75 percentile, 0-4). After adjusting for covariates including age, sex, and oral health status and behavior, maternal blood lead levels were significantly associated with increased dft (prevalence ratio, 1.6; 95% confidence interval, 1.3-1.8; per one standard deviation increase in natural log-transformed maternal blood lead levels). CONCLUSIONS This study found an association between maternal blood lead levels and the prevalence of dental caries in the primary dentition of children aged 7-8 years. Maternal exposure to lead during mid- to late-term pregnancy may affect the caries susceptibility of children after birth.
Humans ; Lead/blood* ; Female ; Dental Caries/epidemiology* ; Prevalence ; Tooth, Deciduous ; Male ; Japan/epidemiology* ; Child ; Cross-Sectional Studies ; Pregnancy ; Adult ; Maternal Exposure/adverse effects* ; Environmental Pollutants/blood* ; Prenatal Exposure Delayed Effects/epidemiology*

OBJECTIVE: To explore the effects of two methods of smear layer removal on the surface properties of dentin. METHODS: Sixty extracted sound third molars were collected in this study, and were prepared as uniform dentin specimens with smear layer. All specimens were randomly divided into three groups: Control group, ultrasonic treatment (UT) group and etched treatment (ET) group. Scanning electron microscope (SEM) were used to observe the surface micromorphology of all three groups. Then, the surface elements, mineral phases and functional groups were analyzed by energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and flourier transformed infrared spectrometer (FTIR) respectively. The mechanical properties, hydrophilicity and biocompatibility were also further evaluated. RESULTS: It was revealed that dentin tubules of UT and ET groups were exposed, but lots of dentin debris piled up on the surface of the control one which covered up dentin tubules on the surface. The EDX results should that the weaker peak value of calcium and phosphorus in ET group than control and UT groups. Characteristic peaks of hydroxyapatite could be seen by XRD in all of the three groups, but lower distinctive peaks of amide Ⅰ, Ⅱ and Ⅲ bands of collagen of the dentin surface in control group than in ET and UT groups. The microhardness results showed that ET group was lower than control and UT groups, the difference was significant (P < 0.05). Better hydrophilicity of ET group was investigated (P < 0.05) than control group and UT group. Cells could be observed to adhere normally to dentin surface of each group which meant that all of the three groups had good biocompatibility. CONCLUSION Both UT and ET could effectively remove the smear layer on the surface of dentin and had no adverse effect of the dentin micromorphology and biocompatibility. The ultrasonic removal of the smear layer did not influence the mineral structure, hydrophilicity and mechanical properties of dentin surface. Although ET can effectively improve the hydrophilicity of dentin but decreased mechanical properties and the content of calcium and phosphorus.
Dentin/ultrastructure* ; Humans ; Surface Properties ; Smear Layer ; Molar, Third ; Microscopy, Electron, Scanning ; Dental Etching/methods*

OBJECTIVE: To observe the long-term health condition of the single-tooth dental implant at the first molar site, and to evaluate the related factors affecting the peri-implant health. METHODS: In this study, 82 patients who were treated in the Second Clinical Division, Peking University School and Hos-pital of Stomatology from January 2008 to December 2020 were enrolled. Peri-implant tissue conditions were assessed by clinical and radiographic examination. The peri-implant probing depth (PPD), modified sulcus bleeding index (mSBI), modified plaque index (mPLI) and papilla index (PI) were recorded for 278 implants. The X-ray analysis included the restoration emergence angle (REA), the clinical crown-implant ratio (cC/I), the horizontal tooth-implant distance (HTID), the contact point level (CPL) and the embrasure surface area (ESA), etc. Kruskal-Wallis rank sum test and generalized estimation equation were used for statistical analysis. RESULTS: The average age of the patients was (40.2±9.5) years (19 to 84 years), with 33 males and 49 females. The follow-up time was (4.9±3.3) years (1 to 10 years). According to the diagnostic criteria in 2018, the prevalence of peri-implantitis in this study was 14.03% on the implant level and 21.95% on the patient level. The peri-implant health rate was 19.06% on the implant level and 18.29% on the patient level. The prevalence of peri-implant mucositis was 66.91% on the implant level and 59.75% on the patient level. At the baseline, there were statistically significant differences between the peri-implant health group and peri-implantitis group in PPD, distal HTID and mesial/distal CPL, cC/I (P < 0.05), while there was no statistically significant difference in mSBI, mPLI, PI, mesial HTID, mesial/distal REA and mesial/distal ESA between the two groups. Among the differences between follow-up and baseline, there were statistically significant dif-ferences between the two groups in PPD, mesial/distal HTID, mesial/distal CPL and mesial/distal ESA (P < 0.05). Generalized estimation equation showed that PPD, mesial/distal HTID, mesial CPL, and mesial ESA had significant positive correlations with the risk of peri-implantitis in the difference between baseline and follow-up. CONCLUSION Based on the results of this study, the peri-implant health rate is still unsatisfied, and the PPD, HTID, CPL, ESA may be related to the long-term health of the implant.
Humans ; Male ; Female ; Middle Aged ; Adult ; Dental Implants, Single-Tooth/adverse effects* ; Aged ; Aged, 80 and over ; Periodontal Index ; Young Adult ; Peri-Implantitis/epidemiology*

OBJECTIVE: To evaluate the filling quality of single cone obturation in root canal model with irregular structure (Hus&Kim Ⅴ, Yin Ⅱ-type isthmus) which established by 3D printing technology using slices and radiographic methods, in order to provide reference for clinical practice. METHODS: (1) Extracted fresh premolars with Hus&Kim Ⅴ and Yin-type Ⅱ isthmus were collected and scanned by cone-beam computed tomography (CBCT), then standard root canal models were designed and printed. Rhodamine B staining and bias fitting were used to verify the availability of the models. (2) 30 root canal models were randomly divided into 3 groups according to different filling methods (n=10). CONTROL GROUP: vertical compaction obturation; Experimental group 1: single cone obturation with 0.06-taper cone (30#); Experimental group 2: single cone obturation with 0.04-taper cone (35#), GuttaFlow 2 as canal sealers. Slices were taken at 2, 4, 6, and 8 mm from the root apex in the direction perpendicular to the long axis of the root and observed under a stereomicroscope to calculate the percentage of filling area (PAV), percentage of gutta-percha-filled area (PGFA), percentage of sealer filled area (PSFA). (3) On the basis of the above results, two groups (n=4) were selected to further analyze the filling quality by micro-computed tomography (Micro-CT), the filling volume of main root canal and the isthmus were obtained, and the percentage of filling volume (PFV) was calculated. Two-way ANOVA was used to evaluate the differences between the groups, and Tukey' s multiple comparison was used to compare the data between the groups and within the groups. RESULTS: (1) Rhodamine B staining solution could overflow the apical foramen, and the main root canal system and the isthmus area were stained, showed no remnants of support material. The 3D standard deviation of the printed model data was 0.03 mm, and the average fitting distance was 0.02 mm. (2) The PFA of the two experimental groups were both significantly lower than that of the control group (F=45.04, P < 0.01). There was no statistical difference of the PFA at apical 2 and 4 mm between the two experimental groups (P>0.01), but at the middle and coronal portions of the root canal (6, 8 mm), the PFA of the experimental group 1 was higher than that of the experimental group 2 (P < 0.01). PFA in the apical 2, 4 mm of the two experimental groups were both lower than that in the middle and coronal portions 6, 8 mm of the canal (P < 0.01). There was no difference in the PGFA and PSFA between the two experimental groups at the apical 2, 4 mm (F=2.383, P>0.01). (3) The results of Micro-CT showed that the PFV of the experimental group 1 was statistically different with the control group (F=47.33, P < 0.01). The PFV of the experimental group 1 was 54.33%±4.35% in the isthmus and 78.31%±4.21% in the main root canal, which were both lower than the PFV of the control group of 76.48%±4.89% (isthmus) and 86.90%±3.29% (main root canal, P < 0.01). The PFV of the main root canal in the experimental group 1 was higher than that in the isthmus (P < 0.01), while there was no difference between the isthmus and the main root canal in the control group (P>0.01). CONCLUSION In the irregular root canal structure with isthmus, using large-taper gutta-percha can improve the filling quality of the middle and upper part of the canal, but the percentage of filling volume in the isthmus is lower than that of the main canal, and more technical improvements are needed.
Humans ; Root Canal Obturation/methods* ; Cone-Beam Computed Tomography ; Root Canal Filling Materials ; Dental Pulp Cavity/diagnostic imaging* ; Printing, Three-Dimensional ; In Vitro Techniques ; Gutta-Percha ; Bicuspid

OBJECTIVE: To establish a three-dimensional finite element model of a digital wire loop space maintainer for the mandible and primary tooth loss, in order to investigate the stress, deformation, and shear force experienced by patients with the loss of the second primary molar when wearing the wire loop space maintainer. METHODS: Cone beam computed tomography (CBCT) scans were performed on the patients to create a digital model of the mandible with the absence of the second primary molar using Mimics 21.0 software. A digital model integrating the crown's retention and the wire loop structure of the full crown and ring wire loop space maintainer was constructed using pediatric space maintainer design software, utilizing three different materials: cobalt-chromium alloy, polyether ether ketone (PEEK), and titanium alloy. In ANSYS Work Beach 2023 R2 software, vertical loads of 70 N, tilted 45° along the long axis of the tooth loads of 70 N, and a 10 N load on the surface of the wire loop were applied to the occlusal surfaces of models 46 and 84, simulating centric and lateral occlusions during chewing with the wire loop space maintainer in place. The stress states of the wire loop space maintainer and supporting teeth were analyzed. RESULTS: Under various loading conditions, the maximum principal stress of the ring wire loop space maintainer was significantly lower than that of the full crown. Stress contour maps indicated that the peak of the maximum principal stress occurred at the junction of the wire loop and crown structure, indicating that this area was more susceptible to fracture. The ring wire loop space maintainer made from PEEK material exhibited the lowest maximum shear stress on the internal organizational surfaces, with equivalent stresses of 23.18 MPa and 36.35 MPa for models 46 and 84, respectively. Stress contour maps demonstrated that the maximum stress on tooth 46 was located at its mesial, while the maximum stress on tooth 84 was situated near the root area on its distal, in contact with the wire loop space maintainer. CONCLUSION In cases of second primary molar loss, wearing the digital ring wire loop space maintainer can effectively distribute stress, and the ring wire loop space maintainer made from PEEK material reduces the stress experienced by supporting teeth to some extent, demonstrating its superiority in clinical application.
Finite Element Analysis ; Humans ; Tooth, Deciduous ; Cone-Beam Computed Tomography ; Space Maintenance, Orthodontic/methods* ; Imaging, Three-Dimensional ; Orthodontic Wires ; Dental Stress Analysis ; Mandible ; Stress, Mechanical

OBJECTIVES: We propose a YOLOv11-TDSP model for improving the accuracy of dental abnormality detection on panoramic oral X-ray images. METHODS: The SHSA single-head attention mechanism was integrated with C2PSA in the backbone layer to construct a new C2PSA_SHSA attention mechanism. The computational redundancy was reduced by applying single-head attention to some input channels to enhance the efficiency and detection accuracy of the model. A small object detection layer was then introduced into the head layer to correct the easily missed and false detections of small objects. Two rounds of structured pruning were implemented to reduce the number of model parameters, avoid overfitting, and improve the average precision. Before training, data augmentation techniques such as brightness enhancement and gamma contrast adjustment were employed to enhance the generalization ability of the model. RESULTS: The experiment results showed that the optimized YOLOv11-TDSP model achieved an accuracy of 94.5%, a recall rate of 92.3%, and an average precision of 95.8% for detecting dental abnormalities. Compared with the baseline model YOLOv11n, these metrics were improved by 6.9%, 7.4%, and 5.6%, respectively. The number of parameters and computational cost of the YOLOv11-TDSP model were only 12% and 13% of those of the high-precision YOLOv11x model, respectively. CONCLUSIONS The lightweight YOLOv11-TDSP model is capable of highly accurate identification of various dental diseases on panoramic oral X-ray images.
Radiography, Panoramic/methods* ; Humans ; Algorithms ; Tooth Abnormalities/diagnostic imaging*