Dental dysplasia are abnormalities in teeth structure, morphology, number and eruption caused by genetic and environmental factors during dental development. Digital medical techniques, as the current hot spot of medical research, bring great challenges and opportunities to modern stomatology. The applications of digital techniques, such as digital diagnosis method, digital virtual simulated design, three-dimensional printing, static and dynamic guidance and artificial intelligence, can provide a more accurate, efficient, automatic and intelligent modern concepts and patterns for epidemiology, diagnosis, multidisciplinary treatment and outcome assessment of dental developmental anomalies.
Artificial Intelligence ; Printing, Three-Dimensional ; Tooth

OBJECTIVE: To evaluate the effect of two barrier membranes [multilaminated small intestinal submucosa (mSIS) and bioresorable collagen membrane (Bio-Gide)] combined with deproteinized bovine bone mineral Bio-Oss on guided bone regeneration through a canine extraction sockets model. METHODS: The distal roots of 18 premolars of the Beagle' s bilateral maxillary and mandibular were removed, and 18 extraction sockets were obtained. They were randomly divided into 3 groups, and the following procedures were performed on the sockets: (1) filled with Bio-Oss and covered by mSIS (mSIS group), (2) filled with Bio-Oss and covered by Bio-Gide (BG group), (3) natural healing (blank control group). Micro-computed tomograph (Micro-CT) was performed 4 and 12 weeks after surgery to eva-luate the new bone regeneration in the sockets of each group. RESULTS: The postoperative healing was uneventful in all the animals, and no complications were observed through the whole study period. Micro-CT analysis showed that the new bone fraction in the mSIS group and the BG group was significantly higher than that in the blank control group at the end of 4 weeks and 12 weeks (P < 0.05), and more new bone fraction was observed in the mSIS group than in the BG group, but the difference was not statistically significant (P>0.05). The new bone fraction of coronal third part of the socket in the mSIS group and BG group at the end of 4 weeks were significantly higher than that of the middle and apical third part of each group (P < 0.05). The values of bone mineral density were similar at 4 weeks in all the groups (P>0.05), but were significantly higher than that in the control group at the end of 12 weeks (P < 0.05). The bone morphometric analysis showed that the trabecular number and trabecular spacing were significantly better in the mSIS group and the BG group than in the control group at the end of 4 weeks and 12 weeks (P < 0.05), while the value in the mSIS group was slightly higher than in the BG group, but the difference was not statistically significant (P>0.05). The difference in trabecular thickness between all the groups was not statistically significant (P>0.05). CONCLUSION mSIS membrane as a barrier membrane combined with deproteinized bovine bone mineral can enhance new bone formation in canine extraction sockets, similar to Bio-Gide collagen membrane.
Animals ; Bone Regeneration ; Bone Substitutes ; Cattle ; Dogs ; Membranes, Artificial ; Minerals ; Tooth Extraction ; Tooth Socket/surgery* ; X-Ray Microtomography

In patients with fully edentulous jaw, treatment of complete dentures should be carried out in many stages when following the conventional methods. Therefore there were disadvantages such as multiple visits to dental clinic is inevitable. In addition, errors caused by polymerization shrinkage, which happens during the fabrication of denture, and difficulties in reproduction of damaged or lost denture were considered as disadvantages. But nowadays, computer-aided design and computer-aided manufacturing (CAD/CAM) system is widely used in dentistry and it has begun to expand its spectrum in manufacturing complete dentures. Using CAD/CAM system to fabricate complete dentures can reduce the number of patient's visit and clinical chair time, since taking impression, recording jaw relation, and selection of artificial teeth are performed at the same time during the first visit, and delivering of dentures during the second visit is possible. In addition, because 3D-Printing technology is used, errors by polymerization shrinkage can be reduced. Among the companies that fabricate complete dentures using CAD/CAM system, DENTCA CAD/CAM denture (DENTCA Inc., Los Angeles, CA, USA) is the most commercialized company. In this case, we treated patients of complete dentures using conventional complete denture method and DENTCA CAD/CAM denture system in the same patient. We would like to report this case because we have achieved good results not only in functional aspects of pronunciation, chewing, and swallowing but also in aesthetic aspects.
Computer-Aided Design ; Deglutition ; Dental Clinics ; Dentistry ; Denture, Complete ; Dentures ; Humans ; Jaw ; Jaw, Edentulous ; Mastication ; Methods ; Polymerization ; Polymers ; Reproduction ; Tooth, Artificial

After the teeth were extracted, maxillary and mandibular alveolar ridges show the opposite resorption pattern and as a result, the mandibular arch is enlarged than maxillary arch relatively. In this situation, we should evaluate both alveolar ridge relationship and arrange the artificial teeth properly for stability of removable prosthesis. This case is a 77 years old male patient who wishes to make removable prosthesis and has atrophic alveolar ridge. By use of model scanner and CAD software, the angle between interalveolar crest line and occlusal plane was easily measured. Depending on the measurement, the artificial teeth are arranged in unilateral cross bite and after completion, patient was satisfied with the denture which showed proper stability, retention, support.
Alveolar Process ; Dental Occlusion ; Dentures ; Humans ; Male ; Malocclusion ; Prostheses and Implants ; Tooth ; Tooth, Artificial

Soft liner is used to functional impression technique when dental stone is immediately poured after taking impression because of viscoelasticity. In this case, a 78-year-old male visited for new dentures. Due to severe resorption of mandibular edentulous ridge, functional impression taking by closed mouth technique was planned. First of all, making maxillary and mandibular provisional dentures was done, and lined by soft liner to rehabilitate pressured maxillary and mandibular edentulous ridge. After this, Functional impression was taken by closed mouth technique using provisional dentures which are transformed to healed maxillary and mandibular edentulous ridge, and final denture were fabricated using maxillary provisional denture as a reference of artificial teeth arrangement. Consequently, restoring a complete edentulous patient with taking functional impression using provisional dentures resulted in recovering satisfying retention and function.
Aged ; Denture, Complete ; Dentures ; Humans ; Male ; Mouth ; Rehabilitation ; Tooth, Artificial

Bone and soft tissue conditions are important for successful implant treatment. But, the placement itself is also very important. Implants which is installed in the wrong position result in the biological, esthetical and mechanical problems. In order to place an implant in the correct position, the final restoration and diagnostic wax-up should be considered prior to the surgery. If the artificial teeth for the interim denture are directly transferred from the diagnostic wax-up, the operator can try the form of diagnostic wax-up in the mouth. If the surgical template is produced by duplicating the interim denture, the implant can be placed in the planned position. In this case, the polymethyl methacrylate (PMMA) artificial tooth was precisely milled by the digital duplication of diagnostic wax-up. And interim denture was fabricated by using these milled teeth. After the patient adapted for a sufficient period, the implant was placed at the planned position with surgical template produced by duplicating the interim denture. After confirming sufficient osseointegration, the final prostheses were made to reflect the shape of diagnostic wax-up. Through this procedure, the satisfactory functional and esthetic outcome could be acquired.
Dental Implants ; Dental Prosthesis ; Dentures ; Humans ; Mouth ; Osseointegration ; Polymethyl Methacrylate ; Prostheses and Implants ; Rehabilitation ; Tooth ; Tooth, Artificial

As the number of elderly population increases, the proportion of edentulous patients is increasing, and the demand for traditional dentures will also increase. Arranging the artificial teeth according to the relationship and shape of the upper and lower alveolar ridge is an important factor increasing the stability of the denture. This case is a 79 year old female patient who wishes to make denture covered by national health insurance for psychological and economical reasons. With the alveolar bone severely atrophic, the dental CAD software was used for accurate diagnosis and the posterior teeth were arranged in a cross bite according to the interalveolar crest line angle by the program. After completion, the denture showed adequate stability and maintenance in periodic examinations and treatment, and the patient also expressed high satisfaction.
Aged ; Alveolar Process ; Denture, Complete ; Dentures ; Diagnosis ; Female ; Humans ; Malocclusion ; National Health Programs ; Rehabilitation* ; Tooth ; Tooth, Artificial

BACKGROUND: The market for vitamin drinks is expanding both in Korea and worldwide. However, it was difficult to find studies regarding the possibility of tooth erosion induction due to vitamin drinks. The purpose of the present in vitro study was to evaluate the effect of tooth erosion caused by a few commercial vitamin beverages on bovine teeth enamel in terms of erosion depth and fluorescence loss. METHODS: Three experimental groups (vitamin drinks), a positive control group (Coca-Cola), and a negative control group (mineral water) were established. Each group consisted of 5 specimens obtained from sound bovine teeth. The pH and titratable acidity of beverages were measured. Specimens were immersed in the beverages and artificial saliva for 6 and 18 hours, respectively. This cycle was repeated for 5 days. The depth of the tooth loss caused by tooth erosion (erosion depth) and maximum loss of fluorescence (Max ΔF) were measured using the microscope and quantified light-induced fluorescence-digital, respectively. For the statistical analysis, the Kruskal-Wallis test and ANOVA were used to compare the erosion depth and Max ΔF of the enamel surfaces. In addition, Spearman correlations were estimated. RESULTS: The pH of the three vitamin beverages ranged from 2.65 to 3.01, which is similar to that of the positive control group. All beverages, except mineral water, had sugar and acidic ingredients. Vitamin drinks and the positive control, Coca-Cola, caused tooth erosion lesions, and showed significant differences in erosion depth compared to mineral water (p<0.05). The vitamin beverages with low pH were associated with high erosion depth and Max ΔF. CONCLUSION: Vitamin drinks have the potential to cause tooth erosion.
Beverages ; Dental Enamel ; Fluorescence ; Hydrogen-Ion Concentration ; In Vitro Techniques ; Korea ; Mineral Waters ; Saliva, Artificial ; Tooth Erosion ; Tooth Loss ; Tooth ; Vitamins

Down syndrome patients generally have poor oral hygiene due to lack of awareness and ability to perform oral care, and there is a high risk of tooth loss. Also, they are characterized by small and irregular teeth and oligodontia, which makes it difficult to do prosthetic treatment. This article reports a case of implant hybrid prosthesis treatment of maxillary edentulous area in Down syndrome patient. The external shape of the final prosthesis was determined by using the mandibular artificial teeth to reflect the oligodontia of the mandible and the pontic areas were adjusted to facilitate oral hygiene care. As a result, aesthetically and functionally satisfactory results were obtained.
Denture, Partial, Fixed ; Down Syndrome ; Humans ; Mandible ; Oral Hygiene ; Prostheses and Implants ; Tooth ; Tooth Loss ; Tooth, Artificial

Macroglossia is an obstacle in regard to general prosthodontic restoration. Not only is it difficult to obtain support and stability from dentures manufactured from normal protocol, obtaining efficacy from basic mastication is also difficult. In such cases, realizing harmony between the occlusion and surrounding muscle structures may be important with regard to manufacture of stable full dentures, and it is necessary to form the appropriate polished surface for this case. The neutral zone is defined as the potential area resulting from the neuromuscular function that results in equilibrium between the outward force exerted by the tongue and the inward force exerted by the lips and cheeks. The artificial teeth of the full denture lies in this area, and if the polished zone follows the anatomic form of the dynamic muscles, the movement of the muscles simply acts as an element of stabilizing the dentures improving the esthetics through facial support.
Cheek ; Dentures ; Esthetics ; Lip ; Macroglossia ; Mastication ; Muscles ; Rehabilitation ; Tongue ; Tooth, Artificial