Objective This study used The Cancer Genome Atlas (TCGA) database to investigate the methylation levels of PCDHGB7 in lung adenocarcinoma tissues and analyze its association with clinical pathological features of lung adenocarcinoma, and its prognostic predictive value. Methods Methylation data of PCDHGB7 from 473 lung adenocarcinoma tissues and 32 normal tissues in the TCGA database were derived and analyzed to assess between-group variance and determine the correlation of methylation levels with clinical pathological features and overall survival. Results PCDHGB7 exhibited significantly higher methylation levels in lung adenocarcinoma tissues than in normal tissues (P<0.001), demonstrating a strong discriminative ability for lung adenocarcinoma (AUC=0.926, P<0.001). The methylation level was strongly associated with gender (P=0.047) and T stage (P=0.013). The critical prognostic sites of PCDHGB7 were identified through univariate Cox regression analysis. We found significant differences in overall survival between patient groups with low or high methylation levels (P=0.0099). Conclusion PCDHGB7 shows significantly elevated methylation in lung adenocarcinoma, which correlates with tumor malignancy and possesses certain prognostic predictive potential.

Accurate timing of myelination is crucial for the proper functioning of the central nervous system. Here, we identified a de novo heterozygous mutation in TMEM63A (c.1894G>A; p. Ala632Thr) in a 7-year-old boy exhibiting hypomyelination. A Ca²⁺ influx assay suggested that this is a loss-of-function mutation. To explore how TMEM63A deficiency causes hypomyelination, we generated Tmem63a knockout mice. Genetic deletion of TMEM63A resulted in hypomyelination at postnatal day 14 (P14) arising from impaired differentiation of oligodendrocyte precursor cells (OPCs). Notably, the myelin dysplasia was transient, returning to normal levels by P28. Primary cultures of Tmem63a^-/- OPCs presented delayed differentiation. Lentivirus-based expression of TMEM63A but not TMEM63A_A632T rescued the differentiation of Tmem63a^-/- OPCs in vitro and myelination in Tmem63a^-/- mice. These data thus support the conclusion that the mutation in TMEM63A is the pathogenesis of the hypomyelination in the patient. Our study further demonstrated that TMEM63A-mediated Ca²⁺ influx plays critical roles in the early development of myelin and oligodendrocyte differentiation.
Animals ; Cell Differentiation/physiology* ; Oligodendroglia/metabolism* ; Mice, Knockout ; Mice ; Male ; Myelin Sheath/metabolism* ; Humans ; Child ; Cells, Cultured ; Oligodendrocyte Precursor Cells/metabolism*

Protrusive facial deformities, characterized by the forward displacement of the teeth and/or jaws beyond the normal range, affect a considerable portion of the population. The manifestations and morphological mechanisms of protrusive facial deformities are complex and diverse, requiring orthodontists to possess a high level of theoretical knowledge and practical experience in the relevant orthodontic field. To further optimize the correction of protrusive facial deformities, this consensus proposes that the morphological mechanisms and diagnosis of protrusive facial deformities should be analyzed and judged from multiple dimensions and factors to accurately formulate treatment plans. It emphasizes the use of orthodontic strategies, including jaw growth modification, tooth extraction or non-extraction for anterior teeth retraction, and maxillofacial vertical control. These strategies aim to reduce anterior teeth and lip protrusion, increase chin prominence, harmonize nasolabial and chin-lip relationships, and improve the facial profile of patients with protrusive facial deformities. For severe skeletal protrusive facial deformities, orthodontic-orthognathic combined treatment may be suggested. This consensus summarizes the theoretical knowledge and clinical experience of numerous renowned oral experts nationwide, offering reference strategies for the correction of protrusive facial deformities.
Humans ; Orthodontics, Corrective/methods* ; Consensus ; Malocclusion/therapy* ; Patient Care Planning ; Cephalometry

Objective To deeply understand the anatomical basis of temporomandibular joint disorders,and explore and master the pathological characteristics of anterior displacement of temporomandibular joint disc through cadaveric dissection and 3D printing technology.Methods By dissecting the temporomandibular joints of 40 head and neck specimens,the bilateral structures of the temporomandibular joints were measured to obtain condyle and articular disc data.3D modeling was carried out using 3ds Max software and printed out a model of temporomandibular joint.The pathological model of the anterior disc displacement with reduction(ADDwR)was simulated by adjusting the opening degree,the position of the articular disk,and the position of the condyle of the model.Results The precise data of the right and left temporomandibular joint discs and condyle were successfully obtained by dissection and measurement.The thickness of the anterior band of left temporomandibular joint discs was(2.02±0.57)mm,the thickness of the middle band was(1.46±0.33)mm,the thickness of the posterior band was(3.00±0.46)mm,the anterior-posterior diameter was(9.60±0.72)mm,and the internal-external diameter was(17.73±0.84)mm.While the thickness of the anterior band of right temporomandibular joint discs was(1.84±0.35)mm,and the thickness of the middle band was(1.43±0.28)mm,the thickness of posterior band was(3.08±0.49)mm,the anterior-posterior diameter was(9.30±0.88)mm,and the internal-external diameter was(17.38±1.10)mm.The internal-external diameter of the left temporomandibular joint condyle was(18.97±0.41)mm,and the anterior-posterior diameter was(8.56±0.43)mm;the internal-external diameter of the right temporomandibular joint condyle was(18.86±0.75)mm,and the anterior-posterior diameter was(8.40±0.30)mm.The standard temporomandibular joint model was printed out by the measured data.The model was utilized to simulate the physiological state of temporomandibular joint under normal conditions,as well as the three pathological states of closed mouth,closed mouth to open mouth,and open mouth in the case of ADDwR.Conclusion The temporomandibular joint model can more intuitively present the changes of anatomical structure in reversible temporoman-dibular joint disorders,which is helpful for understanding and mastering the different classification of this disease.

Objective To summarize the changing prevalence of carbapenem resistance in Enterobacterales based on the data of CHINET Antimicrobial Resistance Surveillance Program from 2015 to 2021 for improving antimicrobial treatment in clinical practice.Methods Antimicrobial susceptibility testing was performed using a commercial automated susceptibility testing system according to the unified CHINET protocol.The results were interpreted according to the breakpoints of the Clinical & Laboratory Standards Institute(CLSI)M100 31st ed in 2021.Results Over the seven-year period(2015-2021),the overall prevalence of carbapenem-resistant Enterobacterales(CRE)was 9.43％(62 342/661 235).The prevalence of CRE strains in Klebsiella pneumoniae,Citrobacter freundii,and Enterobacter cloacae was 22.38％,9.73％,and 8.47％,respectively.The prevalence of CRE strains in Escherichia coli was 1.99％.A few CRE strains were also identified in Salmonella and Shigella.The CRE strains were mainly isolated from respiratory specimens(44.23±2.80)％,followed by blood(20.88±3.40)％and urine(18.40±3.45)％.Intensive care units(ICUs)were the major source of the CRE strains(27.43±5.20)％.CRE strains were resistant to all the β-lactam antibiotics tested and most non-β-lactam antimicrobial agents.The CRE strains were relatively susceptible to tigecycline and polymyxins with low resistance rates.Conclusions The prevalence of CRE strains was increasing from 2015 to 2021.CRE strains were highly resistant to most of the antibacterial drugs used in clinical practice.Clinicians should prescribe antimicrobial agents rationally.Hospitals should strengthen antibiotic stewardship in key clinical settings such as ICUs,and take effective infection control measures to curb CRE outbreak and epidemic in hospitals.

Biomolecular condensates are formed through phase separation of biomacromolecules such as proteins and RNAs. These condensates exhibit liquid-like properties that can futher transition into more stable material states. They form complex internal structures via multivalent weak interactions, enabling precise spatiotemporal regulations. However, the use of inconsistent and non-standardized terminology has become increasingly problematic, hindering academic exchange and the dissemination of scientific knowledge. Therefore, it is necessary to discuss the terminology related to biomolecular condensates in order to clarify concepts, promote interdisciplinary cooperation, enhance research efficiency, and support the healthy development of this field.

Functional dyspepsia (FD), characterized by persistent or recurrent dyspeptic symptoms without identifiable organic, systemic or metabolic causes, is an increasingly recognized global health issue. The objective of this guideline is to equip clinicians and nursing professionals with evidence-based strategies for the management and treatment of adult patients with FD using traditional Chinese medicine (TCM). The Guideline Development Group consulted existing TCM consensus documents on FD and convened a panel of 35 clinicians to generate initial clinical queries. To address these queries, a systematic literature search was conducted across PubMed, EMBASE, the Cochrane Library, China National Knowledge Infrastructure (CNKI), VIP Database, China Biology Medicine (SinoMed) Database, Wanfang Database, Traditional Medicine Research Data Expanded (TMRDE), and the Traditional Chinese Medical Literature Analysis and Retrieval System (TCMLARS). The evidence from the literature was critically appraised using the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) approach. The strength of the recommendations was ascertained through a consensus-building process involving TCM and allopathic medicine experts, methodologists, pharmacologists, nursing specialists, and health economists, leveraging their collective expertise and empirical knowledge. The guideline comprises a total of 43 evidence-informed recommendations that span a range of clinical aspects, including the pathogenesis according to TCM, diagnostic approaches, therapeutic interventions, efficacy assessments, and prognostic considerations. Please cite this article as: Zhang SS, Zhao LQ, Hou XH, Bian ZX, Zheng JH, Tian HH, Yang GH, Hong WS, He YY, Liu L, Shen H, Li YP, Xie S, Shu J, Zeng BF, Li JX, Liu Z, Xiao ZH, Xiao JD, Zheng PY, Huang SG, Chen SL, Fei GJ. International clinical practice guideline on the use of traditional Chinese medicine for functional dyspepsia (2025). J Integr Med. 2025; 23(5):502-518.
Dyspepsia/drug therapy* ; Humans ; Medicine, Chinese Traditional/methods* ; Practice Guidelines as Topic ; Drugs, Chinese Herbal/therapeutic use*

OBJECTIVE: This study aimed to explore the association between body mass index (BMI) and mortality based on the 10-year population-based multicenter prospective study. METHODS: A general population-based multicenter prospective study was conducted at four sites in rural China between 2013 and 2023. Multivariate Cox proportional hazards models and restricted cubic spline analyses were used to assess the association between BMI and mortality. Stratified analyses were performed based on the individual characteristics of the participants. RESULTS: Overall, 19,107 participants with a sum of 163,095 person-years were included and 1,910 participants died. The underweight (< 18.5 kg/m ²) presented an increase in all-cause mortality (adjusted hazards ratio [ aHR] = 2.00, 95% confidence interval [ CI]: 1.66-2.41), while overweight (≥ 24.0 to < 28.0 kg/m ²) and obesity (≥ 28.0 kg/m ²) presented a decrease with an aHR of 0.61 (95% CI: 0.52-0.73) and 0.51 (95% CI: 0.37-0.70), respectively. Overweight ( aHR = 0.76, 95% CI: 0.67-0.86) and mild obesity ( aHR = 0.72, 95% CI: 0.59-0.87) had a positive impact on mortality in people older than 60 years. All-cause mortality decreased rapidly until reaching a BMI of 25.7 kg/m ² ( aHR = 0.95, 95% CI: 0.92-0.98) and increased slightly above that value, indicating a U-shaped association. The beneficial impact of being overweight on mortality was robust in most subgroups and sensitivity analyses. CONCLUSION This study provides additional evidence that overweight and mild obesity may be inversely related to the risk of death in individuals older than 60 years. Therefore, it is essential to consider age differences when formulating health and weight management strategies.
Humans ; Body Mass Index ; China/epidemiology* ; Male ; Female ; Middle Aged ; Prospective Studies ; Rural Population/statistics & numerical data* ; Aged ; Follow-Up Studies ; Adult ; Mortality ; Cause of Death ; Obesity/mortality* ; Overweight/mortality*