In this study, we propose an automatic contour outlining method to measure the spatial resolution of homemade automatic tube current modulation (ATCM) phantom by outlining the edge contour of the phantom image, selecting the region of interest (ROI), and measuring the spatial resolution characteristics of computer tomography (CT) phantom image. Specifically, the method obtains a binarized image of the phantom outlined by an automated fast region convolutional neural network (AFRCNN) model, measures the edge spread function (ESF) of the CT phantom with different tube currents and layer thicknesses, and differentiates the ESF to obtain the line spread function (LSF). Finally, the values passing through the zeros are normalized by the Fourier transform to obtain the CT spatial resolution index (RI) for the automatic measurement of the modulation transfer function (MTF). In this study, this algorithm is compared with the algorithm that uses polymethylmethacrylate (PMMA) to measure the MTF of the phantom edges to verify the feasibility of this method, and the results show that the AFRCNN model not only improves the efficiency and accuracy of the phantom contour outlining, but also is able to obtain a more accurate spatial resolution value through automated segmentation. In summary, the algorithm proposed in this study is accurate in spatial resolution measurement of phantom images and has the potential to be widely used in real clinical CT images.
Phantoms, Imaging ; Tomography, X-Ray Computed/instrumentation* ; Algorithms ; Neural Networks, Computer ; Image Processing, Computer-Assisted/methods* ; Humans ; Polymethyl Methacrylate

OBJECTIVE: To investigate whether adding 1 transverse screw (TS) to the triangular parallel cannulated screw (TPCS) fixation has a mechanical stability advantage for Pauwels type Ⅲ femoral neck fractures by conducting finite element analysis on four internal fixation methods. METHODS: Based on CT data of a healthy adult male volunteer's femur, three Pauwels type Ⅲ femoral neck fracture models (Pauwels angle 70°, Pauwels angle 80°, and Pauwels angle 70° combined with bone defect) were constructed using Mimics 21.0 software and SolidWorks 2017 software. Four different internal fixation models were built at the same time, including TPCS, TPCS+TS, three cross screws (TCS), and TPCS+medial buttress plate (MBP). The mechanical stability of different models under the same load was compared by finite element analysis. RESULTS: The femoral model established in this study exhibited a maximum stress of 28.62 MPa, with relatively higher stress concentrated in the femoral neck. These findings were comparable to previous studies, indicating that the constructed femoral finite element model was correct. The maximum stress of internal fixation in finite element analysis showed that TCS was the lowest and TPCS+MBP was the highest in Pauwels angle 70° and 80° models, while TPCS+TS was the lowest and TCS was the highest in Pauwels angle 70° combined with bone defect model. The maximum displacement of internal fixation in each fracture model was located at the top of the femoral head, with TCS having the highest maximum displacement of the femur. The maximum stress of fracture surface in finite element analysis showed that TCS was the lowest and TPCS was the highest in the Pauwels angle 70° model, while TPCS+MBP was the lowest and TPCS/TCS were the highest in the Pauwels angle 80° model and the Pauwels angle 70° combined with bone defect model, respectively. The maximum displacement of fracture surfece analysis showed that TPCS+MBP was the lowest and TCS was the highest in Pauwels angle 70° and 80° models, while TPCS+TS was the lowest and TCS was the highest in Pauwels angle 70° combined with bone defect model. CONCLUSION For Pauwels type Ⅲ femoral neck fractures, the biomechanical stability of TPCS+TS was superior to that of TPCS alone and TCS, but it has not yet reached the level of TPCS+MBP.
Finite Element Analysis ; Humans ; Femoral Neck Fractures/diagnostic imaging* ; Bone Screws ; Fracture Fixation, Internal/instrumentation* ; Male ; Bone Plates ; Stress, Mechanical ; Biomechanical Phenomena ; Tomography, X-Ray Computed ; Adult ; Femur Neck/surgery*

OBJECTIVE: To explore the differences in the implantation safety and stability of a S ₁ alar-iliac screw (S1AIS) or S2AIS for sacroiliac joint fixation, providing reference for selecting appropriate internal fixation in clinical practice. METHODS: Patients who underwent pelvic CT examination between January 2024 and December 2024 were selected. CT data from 80 patients with normal pelvic structure who met the selection criteria were included in a 1∶1 male to female ratio. CT digital reconstruction technology was used to measure the transverse and longitudinal diameters of the S1AIS and S2AIS insertable ranges, as well as the length, width, and sacral side length of the screw trajectory. The pelvic CT data from 30 patients were randomly selected based on a 1∶1 male to female ratio for three-dimensional (3D) printing of pelvic samples. The S1AIS/S2AIS with a diameter of 6.5 mm and 8.0 mm were implanted at the optimal entry/exit points on the left and right sides, respectively, to observe the perforation of the screw trajectory. The pelvic CT data from 1 patient was randomly selected for 3D printing of 10 pelvic samples to simulate Tile C2 fracture. They were divided into S1AIS group ( n=5) and S2AIS group ( n=5), with one S1AIS and one S2AIS fixation used for posterior sacroiliac joint separation, and the specimen stiffness and maximum load were measured by using an electric tension torsion dual axis universal mechanical tester. RESULTS: The anatomical parameter measurement showed that there was no significant difference in the length and width of the screw trajectory between S1AIS and S2AIS ( P>0.05), but the transverse and longitudinal diameters of the insertable ranges, as well as the sacral side length of the screw trajectory, were all greater than those of S2AIS, with significant differences ( P<0.05). After simulating the implantation of S1AIS and S2AIS with a diameter of 6.5 mm in pelvic specimens, no screw penetration was observed. Both S1AIS and S2AIS with a diameter of 8.0 mm showed screw penetration, with S2AIS having a higher incidence of posterior lateral sacral cortical penetration (46.7%) than S1AIS (3.3%) ( P<0.05). The biomechanical test showed that the stiffness and maximum load of S2AIS were significantly lower than those of S1AIS ( P<0.05). CONCLUSION As a method to fix the sacroiliac joint, the S1AIS has a larger insertable range, a longer sacral side length of the screw trajectory, a lower incidence of posterior lateral cortical rupture of the sacrum, and a greater fixation strength than S2AIS. Therefore, the implantation safety and fixation stability of the S1AIS are superior to S2AIS, and a diameter less than 8.0 mm screws should be selected as S2AIS for Chinese people.
Humans ; Bone Screws ; Sacroiliac Joint/diagnostic imaging* ; Male ; Female ; Sacrum/diagnostic imaging* ; Fracture Fixation, Internal/instrumentation* ; Ilium/diagnostic imaging* ; Tomography, X-Ray Computed ; Middle Aged ; Adult ; Printing, Three-Dimensional ; Aged

OBJECTIVE: To explore the biomechanical characteristics and clinical application effects of three-dimensional (3D) printed osteotomy guide plate combined with Ilizarov technique in the treatment of rigid clubfoot. METHODS: A retrospective analysis was performed on the clinical data of 11 patients with rigid clubfoot who met the inclusion criteria and were admitted between January 2019 and December 2024. There were 6 males and 5 females, aged 21-60 years with an average of 43.2 years. Among them, 5 cases were untreated congenital rigid clubfoot, 4 cases were recurrent rigid clubfoot after previous treatment, and 2 cases were rigid clubfoot due to disease sequelae. All 11 patients first received slow distraction using Ilizarov technique combined with circular external fixator until the force lines of the foot and ankle joint were basically normal. Then, 1 male patient aged 24 years was selected, and CT scanning was used to obtain imaging data of the ankle joint and foot. A 3D finite element model was established and validated using the plantar stress distribution nephogram of the patient. After validation, the biomechanical changes of the tibiotalar joint under the same load were simulated after triple arthrodesis and fixation. The optimal correction angle of the hindfoot was determined to fabricate 3D-printed osteotomy guide plates, and all 11 patients underwent triple arthrodesis using these guide plates. The functional recovery was evaluated by comparing the American Orthopaedic Foot and Ankle Society (AOFAS) score, International Clubfoot Study Group (ICFSG) score, and 36-Item Short Form Survey (SF-36) score before and after operation. RESULTS: Finite element analysis showed that the maximum peak von Mises stress of the tibiotalar joint was at hindfoot varus 3° and the minimum at valgus 6°; the maximum peak von Mises stress of the 3 naviculocuneiform joints under various conditions appeared at lateral naviculocuneiform joint before operation, and the minimum appeared at lateral naviculocuneiform joint at neutral position 0°; the maximum peak von Mises stress of the 5 tarsometatarsal joints under various conditions appeared at the 2nd tarsometatarsal joint at hindfoot neutral position 0°, and the minimum appeared at the 1st tarsometatarsal joint at valgus 6°. Clinical application results showed that the characteristics of clubfoot deformity observed during operation were consistent with the preoperative 3D reconstruction model. All 11 patients were followed up 8-24 months with an average of 13.1 months. One patient had postoperative incision exudation, which healed after dressing change; the remaining patients had good incision healing. All patients achieved good healing of the osteotomy segments, with a healing time of 3-6 months and an average of 4.1 months. At last follow-up, the AOFAS score, SF-36 score, and ICFSG score significantly improved when compared with those before operation ( P<0.05). CONCLUSION The 3D-printed osteotomy guide plate combined with Ilizarov technique has favorable biomechanical advantages in the treatment of rigid clubfoot, with significant clinical application effects. It can effectively improve the foot function of patients and achieve precise and personalized treatment.
Humans ; Clubfoot/diagnostic imaging* ; Printing, Three-Dimensional ; Male ; Osteotomy/instrumentation* ; Female ; Ilizarov Technique/instrumentation* ; Adult ; Retrospective Studies ; Biomechanical Phenomena ; Middle Aged ; Bone Plates ; Young Adult ; Finite Element Analysis ; Treatment Outcome ; Ankle Joint/physiopathology* ; Tomography, X-Ray Computed ; External Fixators

OBJECTIVE: To define a safe distance range from the LC-Ⅱ screw trajectory to the apex of the greater sciatic notch based on pelvic CT measurements, and to clinically assess the feasibility of using this range under iliac oblique view combined with iliac tangential view fluoroscopy to guide screw insertion. METHODS: CT scans of 104 normal pelvises collected between January 2022 and February 2025 were analyzed. There were 52 males and 52 females, with a median age of 45.8 years (range, 19-76 years). The RadiAnt DICOM Viewer software was used to reconstruct coronal, sagittal, and axial sections of the potential LC-Ⅱ screw trajectory. The maximum safety distance (Dmax) and the optimal safety distance (Dopt) from this trajectory to the greater sciatic notch were measured on the coronal and sagittal views. A retrospective analysis was conducted on 21 patients with LC-Ⅱ type pelvic fractures treated with the LC-Ⅱ screws fixation. And the screws were placed within the pre-defined safe distance under guidance from the iliac oblique view and iliac tangential view. Postoperative CT scans were obtained to evaluate the accuracy of screw placement. RESULTS: Radiographic measurements from the 104 cases showed that Dmax ranged from 1.87 to 3.87 cm (mean, 2.79 cm), and Dopt ranged from 1.01 to 2.92 cm (mean, 1.84 cm). Both Dmax and Dopt were significantly greater in the males than in the females ( P>0.05). No significant difference was found between the left and right sides within the same gender ( P>0.05). All 21 patients successfully underwent fracture reduction and fixation, with a total of 23 LC-Ⅱscrews implanted. According to the Lonstein grading system, the screw placement accuracy was rated as excellent in 16 screws, good in 3, fair in 3, and poor in 1, with an excellent and good rate of 82.6%. CONCLUSION Utilizing a CT-defined safe distance range from the screw trajectory to the greater sciatic notch, and adhering to this range under iliac oblique view combined with iliac tangential view fluoroscopy, enables the accurate and precise placement of LC-Ⅱ screws.
Humans ; Male ; Female ; Middle Aged ; Bone Screws ; Adult ; Tomography, X-Ray Computed/methods* ; Aged ; Ilium/surgery* ; Pelvic Bones/diagnostic imaging* ; Fracture Fixation, Internal/instrumentation* ; Retrospective Studies ; Fluoroscopy ; Fractures, Bone/diagnostic imaging* ; Young Adult

In this paper, the technical basis and latest progress of X-ray tube for CT systems are introduced, with emphasis on material innovation, superconducting technology, liquid metal bearing, low dose scanning and electron beam filtration. As the core component of CT equipment, the technological innovation of CT X-ray tubes significantly improves image quality, reduces radiation dose, improves efficiency, and extends the service life of the X-ray tubes. Domestic and foreign manufacturers have made remarkable progress in the field of CT X-ray tubes. Domestic manufacturers, such as the 12th Institute of CLP, have made important progress in the development of CT X-ray tubes, and successfully achieved independent research and development of high-end CT X-ray tubes. Foreign manufacturers such as Siemens, GE, Philips and other manufacturers continue to innovate in liquid metal bearings, superconducting technology, new targets and other aspects to maintain technology leadership. In the future, CT X-ray tubes will develop in the direction of personalization, intelligence, long life, miniaturization and portability, providing more accurate and low-risk technical support for medical image diagnosis.
Tomography, X-Ray Computed/instrumentation* ; Equipment Design

Postmortem changes on corpses appear immediately after death, and can transform the original structure characteristics of the corpse to different degrees as well as show specific changes on computed tomography （CT） images, sometimes with false positives and false negatives, influencing the identification of injuries or diseases. This paper systematically summarizes the postmortem changes of computed tomography imaging characteristics on corpses, to further expand the application of virtopsy in the practices of forensic pathology identification, and provide reference for the identification of injuries, diseases and changes after normal death.
Autopsy ; Cadaver ; Forensic Pathology/instrumentation* ; Humans ; Postmortem Changes ; Research/trends* ; Tomography, X-Ray Computed

BACKGROUND: Localization of multiple small lung nodules is the technical difficulty of minimally invasive operation resection. However, there are few clinical studies on the preoperative localization of multiple small lung nodules. This study was designed to evaluate the clinical value of preoperative computed tomography (CT) guided microcoil localization for multiple small lung nodules compared with single small lung nodule before video-assisted thoracoscopic surgery (VATS). METHODS: A retrospective analysis of the clinical data of 235 patients with preoperative pulmonary nodules microcoil localization was performed. According to whether the nodules were single, they were divided into single nodule group (184 cases) and multiple nodules group (51 cases) (multiple nodules group). The single nodule group was positioned under CT-guided conventional methods. The multiple nodules group were CT guided localized by microcoil in batches according to priority before VATS. The success rate, complications, pathological results and localization operations related data were statistically analyzed. RESULTS: The success rate of localization in multiple nodule groups was 90.2%, there was no significant difference compared with the single nodule group (90.2% vs 94.6%, P=0.205). The occurrence rate of pneumothorax in multiple nodule group and single nodule group was no statistical difference (21.6% vs 14.1%, P=0.179), however, the operation time in the multiple nodule group was significantly longer than the single nodule group [(30.6±6.6) min vs (19.9±7.4) min, P=0.000]. There were no serious complications such as massive hemoptysis, air embolism or hemothorax. There was no conversion to thoracotomy due to failure of localizing the nodules during operation. Sub-lobectomy was the main method of operation. The majority of postoperative pathologies were non-invasive carcinomas. CONCLUSIONS For multiple small lung pulmonary nodules requiring thoracoscopic surgery, according to certain strategies, preoperative CT-guided localized by microcoil in batches according to priority before VATS is safe and effective, and worthy of promotion.
Adult ; Aged ; Aged, 80 and over ; Female ; Humans ; Lung Neoplasms ; diagnostic imaging ; pathology ; surgery ; Male ; Middle Aged ; Multiple Pulmonary Nodules ; diagnostic imaging ; pathology ; surgery ; Preoperative Period ; Retrospective Studies ; Surgery, Computer-Assisted ; Thoracic Surgery, Video-Assisted ; instrumentation ; Tomography, X-Ray Computed ; Treatment Outcome ; Tumor Burden

Adult ; Catheter-Related Infections ; etiology ; Catheterization, Central Venous ; instrumentation ; Central Venous Catheters ; adverse effects ; Female ; Humans ; Pulmonary Embolism ; etiology ; Recurrence ; Sepsis ; etiology ; Tomography, X-Ray Computed

OBJECTIVES: To develop a measurement software of lung compression degree to calculate the lung compression ratio in pneumothorax patients accurately and quickly, and then provide an objective assessment of damage degree in forensic clinical identification. METHODS: A volume calculation software was established according to the working principle of the CT instrument. CT data of 15 pneumothorax patients were selected as research objects. The lung compression ratio of pneumothorax patient was calculated by the lung compression volume calculation software of the CT instrument. Meanwhile, the lung compression ratio was also calculated by the developed volume calculation software. The lung compression ratio and operation time calculated by the two methods were analyzed statistically. Scatter plot graphs were draw based on related data, and the developed volume calculation software was verified. RESULTS: The difference between the lung compression ratios calculated by the two methods was not statistically significant, but showed a linear correlation （P<0.05）. The operation time of the developed volume calculation software was obviously shorter. CONCLUSIONS The volume calculation software developed in this study can calculate the lung compression degree of pneumothorax more conveniently and rapidly with easy accessibility, which shows an application value in the forensic practice.
Forensic Medicine/instrumentation* ; Humans ; Image Processing, Computer-Assisted/methods* ; Lung/diagnostic imaging* ; Pneumothorax ; Software ; Tomography, X-Ray Computed